{
  "institutionAliases": {
    "Department of Mechanical Engineering, KAIST": "KAIST",
    "KAIST": "KAIST",
    "KAIST (Korea Advanced Institute of Science and Technology)": "KAIST",
    "KAIST(Korea Advanced Institute of Science and Technology)": "KAIST",
    "Korea Advanced Institute of Science & Technology": "KAIST",
    "Korea Advanced Institute of Science & Technology (KAIST)": "KAIST",
    "Korea Advanced Institute of Science and Technology": "KAIST",
    "Korea Advanced Institute of Science and Technology (KAIST)": "KAIST",
    "Korea Advanced Institute of Science and Technology(KAIST)": "KAIST",
    "Korea Advanced Institute of Science and Technology, KAIST": "KAIST",
    "Korea Institute of Science and Technology (KAIST)": "KAIST",
    "Korean Advanced Institute of Science and Technology": "KAIST",
    "School of Electrical Engineering, KAIST": "KAIST",
    "DGIST": "DGIST",
    "Daegu Gyeongbuk Institute of Science & Technology": "DGIST",
    "Daegu Gyeongbuk Institute of Science and Technology": "DGIST",
    "Daegu Gyeongbuk Institute of Science and Technology (DGIST)": "DGIST",
    "Daegu Gyeongbuk Institute of Science and Technology(DGIST)": "DGIST",
    "Deagu Gyeongbuk Institute of Science and Technology": "DGIST",
    "GIST": "GIST",
    "Gwangju Institute of Science and Technology": "GIST",
    "Gwangju Institute of Science and Technology (GIST)": "GIST",
    "Gwangju Institute of Science and Technology(GIST)": "GIST",
    "Gwangju Institutue of Science and Technology": "GIST",
    "HEROLab (in Univ. POSTECH)": "POSTECH",
    "POSTECH": "POSTECH",
    "POSTECH(Pohang University of Science and Technology)": "POSTECH",
    "Pohang University of Science and Technology": "POSTECH",
    "Pohang University of Science and Technology ( POSTECH )": "POSTECH",
    "Pohang University of Science and Technology (POSTECH)": "POSTECH",
    "Pohang University of Science and Technology (Postech)": "POSTECH",
    "Pohang University of Science of Technology": "POSTECH",
    "Postech": "POSTECH",
    "UNIST": "UNIST",
    "UNIST (Ulsan National Institute of Science and Technology)": "UNIST",
    "Ulsan National Institute of Science & Technology": "UNIST",
    "Ulsan National Institute of Science and Technology": "UNIST",
    "Ulsan National Institute of Science and Technology(UNIST)": "UNIST",
    "ETRI": "ETRI",
    "ETRI(Electronics and Telecommunications Research Institute)": "ETRI",
    "Electronics and Telecommunications Research Institute": "ETRI",
    "Electronics and Telecommunications Research Institute (ETRI)": "ETRI",
    "KETI": "KETI",
    "KETI (Korea Electronics Technology Institute)": "KETI",
    "Korea Electronics Tech. Inst": "KETI",
    "Korea Electronics Technology Institute": "KETI",
    "Korea Electronics Technology Institute (KETI)": "KETI",
    "KITECH": "KITECH",
    "Korea Institue of Industrial Technology": "KITECH",
    "Korea Institute of Industrial Technology": "KITECH",
    "Korea Institute of Industrial Technology (KITECH)": "KITECH",
    "Korea Institute of Industrial Technology(KITECH)": "KITECH",
    "Korea Institute of Industrial Techology": "KITECH"
  },
  "conference": "ICCAS 2026",
  "title": "26th International Conference on Control, Automation and Systems",
  "location": "Sapporo, Japan",
  "dates": [
    "2026-10-27",
    "2026-10-28",
    "2026-10-29",
    "2026-10-30"
  ],
  "timezone": "Asia/Tokyo",
  "sourceUpdated": "2026-10-17",
  "snapshotDate": "2026-10-31",
  "sourceStatus": "Tentative and subject to change",
  "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ProgramAtAGlanceWeb.html",
  "counts": {
    "papers": 614,
    "oral": 269,
    "poster": 345,
    "paperSessions": 57,
    "authors": 1584,
    "affiliationLabels": 489,
    "keywords": 22,
    "abstracts": 614,
    "institutions": 444
  },
  "warnings": [
    {
      "session": "WeAT1",
      "message": "2 oral entries share 10:15–10:30 in the source."
    },
    {
      "session": "FrAT8",
      "message": "2 oral entries share 10:15–10:30 in the source."
    }
  ],
  "sessions": [
    {
      "id": "TuAT2",
      "title": "Image-Based 3D Model Reconstruction: From Multi-View Geometry to Neural Rendering (09: 00-11: 00)",
      "type": "Tutorial",
      "date": "2026-10-27",
      "room": "Cattleya, 3F",
      "start": "09:00",
      "end": "12:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tuat2",
      "people": [],
      "papers": []
    },
    {
      "id": "TuAT3",
      "title": "Fun and Foundations of Swarm Systems and Control (09: 00-11: 20)",
      "type": "Tutorial",
      "date": "2026-10-27",
      "room": "Azalea, 3F",
      "start": "09:00",
      "end": "12:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tuat3",
      "people": [],
      "papers": []
    },
    {
      "id": "TuAT4",
      "title": "Dynamically Embedded Model Predictive Control: Real-Time Operation, Constraint Satisfaction, and Stability (09: 00-12: 10)",
      "type": "Tutorial",
      "date": "2026-10-27",
      "room": "Lilac, 3F",
      "start": "09:00",
      "end": "12:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tuat4",
      "people": [],
      "papers": []
    },
    {
      "id": "TuBT2",
      "title": "Learning-Based Control for Automotive Systems: From Semi-Parametric Dynamics Modeling to Online Policy Improvement (13: 00-15: 50)",
      "type": "Tutorial",
      "date": "2026-10-27",
      "room": "Cattleya, 3F",
      "start": "13:00",
      "end": "17:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tubt2",
      "people": [],
      "papers": []
    },
    {
      "id": "TuBT3",
      "title": "From AI & Robotics Research to Railway Deployment (14: 00-17: 00)",
      "type": "Tutorial",
      "date": "2026-10-27",
      "room": "Azalea, 3F",
      "start": "13:00",
      "end": "17:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tubt3",
      "people": [],
      "papers": []
    },
    {
      "id": "TuBT4",
      "title": "Soft Haptic Modules for Skin-Conformal Multi-Modal Tactile Interfaces",
      "type": "Workshop",
      "date": "2026-10-27",
      "room": "Lilac, 3F",
      "start": "13:00",
      "end": "17:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tubt4",
      "people": [],
      "papers": []
    },
    {
      "id": "TuPo1S",
      "title": "Poster Session 1",
      "type": "Poster Session",
      "date": "2026-10-27",
      "room": "3F Lobby",
      "start": "17:00",
      "end": "18:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s",
      "people": [
        {
          "role": "Chair",
          "name": "Kyung, Ki-Uk",
          "affiliation": "Korea Advanced Institute of Science & Technology (KAIST)"
        },
        {
          "role": "Co-Chair",
          "name": "Lee, Seongwon",
          "affiliation": "Kookmin University"
        }
      ],
      "papers": [
        "TuPo1S.1",
        "TuPo1S.2",
        "TuPo1S.3",
        "TuPo1S.4",
        "TuPo1S.5",
        "TuPo1S.6",
        "TuPo1S.7",
        "TuPo1S.8",
        "TuPo1S.9",
        "TuPo1S.10",
        "TuPo1S.11",
        "TuPo1S.12",
        "TuPo1S.13",
        "TuPo1S.14",
        "TuPo1S.15",
        "TuPo1S.16",
        "TuPo1S.17",
        "TuPo1S.18",
        "TuPo1S.19",
        "TuPo1S.20",
        "TuPo1S.21",
        "TuPo1S.22",
        "TuPo1S.23",
        "TuPo1S.24",
        "TuPo1S.25",
        "TuPo1S.26",
        "TuPo1S.27",
        "TuPo1S.28",
        "TuPo1S.29",
        "TuPo1S.30",
        "TuPo1S.31",
        "TuPo1S.32",
        "TuPo1S.33",
        "TuPo1S.34",
        "TuPo1S.35",
        "TuPo1S.36",
        "TuPo1S.37",
        "TuPo1S.38",
        "TuPo1S.39",
        "TuPo1S.40",
        "TuPo1S.41",
        "TuPo1S.42",
        "TuPo1S.43",
        "TuPo1S.44",
        "TuPo1S.45",
        "TuPo1S.46",
        "TuPo1S.47",
        "TuPo1S.48",
        "TuPo1S.49",
        "TuPo1S.50"
      ]
    },
    {
      "id": "TuWR",
      "title": "Welcome Reception",
      "type": "",
      "date": "2026-10-27",
      "room": "Palace Hall, 3F",
      "start": "18:00",
      "end": "19:20",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tuwr",
      "people": [],
      "papers": []
    },
    {
      "id": "WeAT1",
      "title": "Control System Applications",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Palace Hall, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1",
      "people": [
        {
          "role": "Chair",
          "name": "Han, Soohee",
          "affiliation": "Pohang University of Science and Technology ( POSTECH )"
        },
        {
          "role": "Organizer",
          "name": "Yoon, Kwanwoong",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        },
        {
          "role": "Organizer",
          "name": "Lee, Hohyung",
          "affiliation": "Pohang University of Science and Technology (Postech)"
        },
        {
          "role": "Organizer",
          "name": "Park, Hyeryeong",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "role": "Organizer",
          "name": "Shin, KyuMin",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "role": "Organizer",
          "name": "Lee, Hye Jin",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        },
        {
          "role": "Organizer",
          "name": "Ryu, Seung Hyun",
          "affiliation": "POSTECH"
        },
        {
          "role": "Organizer",
          "name": "Han, Soohee",
          "affiliation": "Pohang University of Science and Technology ( POSTECH )"
        }
      ],
      "papers": [
        "WeAT1.1",
        "WeAT1.2",
        "WeAT1.3",
        "WeAT1.4",
        "WeAT1.5",
        "WeAT1.6",
        "WeAT1.7"
      ]
    },
    {
      "id": "WeAT2",
      "title": "Rehabilitation Robot",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Cattleya, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat2",
      "people": [
        {
          "role": "Chair",
          "name": "Kang, Jiyeon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "papers": [
        "WeAT2.1",
        "WeAT2.2",
        "WeAT2.3",
        "WeAT2.4",
        "WeAT2.5"
      ]
    },
    {
      "id": "WeAT3",
      "title": "ICROS Daejeon-Chungcheong OS : Modeling, Estimation, and Control for Intelligent Systems",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Azalea, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat3",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Yonghun",
          "affiliation": "Chungnam National University"
        },
        {
          "role": "Organizer",
          "name": "Kim, Yonghun",
          "affiliation": "Chungnam National University"
        }
      ],
      "papers": [
        "WeAT3.1",
        "WeAT3.2",
        "WeAT3.3",
        "WeAT3.4",
        "WeAT3.5",
        "WeAT3.6"
      ]
    },
    {
      "id": "WeAT4",
      "title": "Navigation, Guidance and Control 1",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Lilac, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat4",
      "people": [
        {
          "role": "Chair",
          "name": "Kyung, Ki-Uk",
          "affiliation": "Korea Advanced Institute of Science & Technology (KAIST)"
        }
      ],
      "papers": [
        "WeAT4.1",
        "WeAT4.2",
        "WeAT4.3",
        "WeAT4.4",
        "WeAT4.5",
        "WeAT4.6"
      ]
    },
    {
      "id": "WeAT5",
      "title": "Award Session 1",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Crown, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat5",
      "people": [
        {
          "role": "Chair",
          "name": "Park, Sukho",
          "affiliation": "DGIST"
        }
      ],
      "papers": [
        "WeAT5.1",
        "WeAT5.2",
        "WeAT5.3",
        "WeAT5.4",
        "WeAT5.5",
        "WeAT5.6"
      ]
    },
    {
      "id": "WeAT6",
      "title": "Biomedical Instruments and Systems",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony A, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat6",
      "people": [
        {
          "role": "Chair",
          "name": "Nakakuki, Takashi",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "papers": [
        "WeAT6.1",
        "WeAT6.2",
        "WeAT6.3",
        "WeAT6.4",
        "WeAT6.5"
      ]
    },
    {
      "id": "WeAT7",
      "title": "Artificial Intelligence Systems 1",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony B, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat7",
      "people": [
        {
          "role": "Chair",
          "name": "Lee, Donghwan",
          "affiliation": "KAIST"
        }
      ],
      "papers": [
        "WeAT7.1",
        "WeAT7.2",
        "WeAT7.3",
        "WeAT7.4",
        "WeAT7.5",
        "WeAT7.6"
      ]
    },
    {
      "id": "WeAT8",
      "title": "Recent Advancements in Machine Learning Techniques for Intelligent Systems 1",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony C, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat8",
      "people": [
        {
          "role": "Chair",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        },
        {
          "role": "Organizer",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "papers": [
        "WeAT8.1",
        "WeAT8.2",
        "WeAT8.3",
        "WeAT8.4",
        "WeAT8.5",
        "WeAT8.6"
      ]
    },
    {
      "id": "WeAT9",
      "title": "GNC Technology and Application",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony D, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat9",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Sun Young",
          "affiliation": "Kunsan National University"
        },
        {
          "role": "Organizer",
          "name": "Kim, Sun Young",
          "affiliation": "Kunsan National University"
        },
        {
          "role": "Organizer",
          "name": "Kang, Chang Ho",
          "affiliation": "Sejong University"
        }
      ],
      "papers": [
        "WeAT9.1",
        "WeAT9.2",
        "WeAT9.3",
        "WeAT9.4"
      ]
    },
    {
      "id": "WePL",
      "title": "Opening Ceremony & Plenary Lecture Ⅰ (Prof. Koushil Sreenath, USA)",
      "type": "Plenary Lecture",
      "date": "2026-10-28",
      "room": "Palace Hall, 3F",
      "start": "10:40",
      "end": "11:40",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepl",
      "people": [
        {
          "role": "Chair",
          "name": "Park, Hae-Won",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "papers": []
    },
    {
      "id": "WeKN",
      "title": "Keynote Speech Ⅰ(Prof. Jinoh Lee) & Ⅱ (Prof. Daniel Seita)",
      "type": "",
      "date": "2026-10-28",
      "room": "Palace Hall, 3F",
      "start": "13:00",
      "end": "14:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wekn",
      "people": [
        {
          "role": "Chair",
          "name": "Park, Hae-Won",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "papers": []
    },
    {
      "id": "WeFrS",
      "title": "Frontiers Session 1",
      "type": "",
      "date": "2026-10-28",
      "room": "Palace Hall, 3F",
      "start": "14:20",
      "end": "15:20",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wefrs",
      "people": [
        {
          "role": "Chair",
          "name": "Hong, Seungwoo",
          "affiliation": "Korea University"
        }
      ],
      "papers": []
    },
    {
      "id": "WeBT1",
      "title": "Control Theory and Applications 1",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Palace Hall, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt1",
      "people": [
        {
          "role": "Chair",
          "name": "Lee, Donghwan",
          "affiliation": "KAIST"
        }
      ],
      "papers": [
        "WeBT1.1",
        "WeBT1.2",
        "WeBT1.3",
        "WeBT1.4",
        "WeBT1.5",
        "WeBT1.6"
      ]
    },
    {
      "id": "WeBT2",
      "title": "Physical AI and Military Robots 1",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Cattleya, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt2",
      "people": [
        {
          "role": "Chair",
          "name": "Cha, Dowan",
          "affiliation": "Korea National Defense University"
        },
        {
          "role": "Organizer",
          "name": "Cha, Dowan",
          "affiliation": "Korea National Defense University"
        }
      ],
      "papers": [
        "WeBT2.1",
        "WeBT2.2",
        "WeBT2.3",
        "WeBT2.4",
        "WeBT2.5"
      ]
    },
    {
      "id": "WeBT3",
      "title": "Robot Vision 1",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Azalea, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt3",
      "people": [
        {
          "role": "Chair",
          "name": "Lee, Alex",
          "affiliation": "Sookmyung Women’s University"
        }
      ],
      "papers": [
        "WeBT3.1",
        "WeBT3.2",
        "WeBT3.3",
        "WeBT3.4",
        "WeBT3.5",
        "WeBT3.6"
      ]
    },
    {
      "id": "WeBT4",
      "title": "Navigation, Guidance and Control 2",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Lilac, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt4",
      "people": [
        {
          "role": "Chair",
          "name": "Cho, Younggun",
          "affiliation": "Inha University"
        }
      ],
      "papers": [
        "WeBT4.1",
        "WeBT4.2",
        "WeBT4.3",
        "WeBT4.4",
        "WeBT4.5"
      ]
    },
    {
      "id": "WeBT5",
      "title": "ICROS-ECTI Joint OS: Advanced Control and Estimation",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Crown, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt5",
      "people": [
        {
          "role": "Chair",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        },
        {
          "role": "Organizer",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        },
        {
          "role": "Organizer",
          "name": "Banjerdpongchai, David",
          "affiliation": "Chulalongkorn University"
        }
      ],
      "papers": [
        "WeBT5.1",
        "WeBT5.2",
        "WeBT5.3",
        "WeBT5.4",
        "WeBT5.5"
      ]
    },
    {
      "id": "WeBT6",
      "title": "Control Devices and Instruments",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony A, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt6",
      "people": [
        {
          "role": "Chair",
          "name": "Nakasone, Seigen",
          "affiliation": "Okinawa Institute of Science and Technology"
        }
      ],
      "papers": [
        "WeBT6.1",
        "WeBT6.2",
        "WeBT6.3",
        "WeBT6.4"
      ]
    },
    {
      "id": "WeBT7",
      "title": "Artificial Intelligence Systems 2",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony B, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt7",
      "people": [
        {
          "role": "Chair",
          "name": "Hwang, Myun Joong",
          "affiliation": "University of Seoul"
        }
      ],
      "papers": [
        "WeBT7.1",
        "WeBT7.2",
        "WeBT7.3",
        "WeBT7.4",
        "WeBT7.5",
        "WeBT7.6"
      ]
    },
    {
      "id": "WeBT8",
      "title": "Recent Advancements in Machine Learning Techniques for Intelligent Systems 2",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony C, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt8",
      "people": [
        {
          "role": "Chair",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        },
        {
          "role": "Organizer",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "papers": [
        "WeBT8.1",
        "WeBT8.2",
        "WeBT8.3",
        "WeBT8.4",
        "WeBT8.5"
      ]
    },
    {
      "id": "WeBT9",
      "title": "ICT Convergence in Intelligent Robotics and AI Development",
      "type": "Oral Session",
      "date": "2026-10-28",
      "room": "Symphony D, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt9",
      "people": [
        {
          "role": "Chair",
          "name": "Kwon, Wookyong",
          "affiliation": "ETRI"
        },
        {
          "role": "Organizer",
          "name": "Kwon, Wookyong",
          "affiliation": "ETRI"
        }
      ],
      "papers": [
        "WeBT9.1",
        "WeBT9.2",
        "WeBT9.3",
        "WeBT9.4",
        "WeBT9.5"
      ]
    },
    {
      "id": "WePo2P",
      "title": "Poster Session 2",
      "type": "Poster Session",
      "date": "2026-10-28",
      "room": "3F Lobby",
      "start": "09:30",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Donghan",
          "affiliation": "Kyung Hee University"
        },
        {
          "role": "Co-Chair",
          "name": "Shin, Won Dong",
          "affiliation": "POSTECH"
        }
      ],
      "papers": [
        "WePo2P.1",
        "WePo2P.2",
        "WePo2P.3",
        "WePo2P.4",
        "WePo2P.5",
        "WePo2P.6",
        "WePo2P.7",
        "WePo2P.8",
        "WePo2P.9",
        "WePo2P.10",
        "WePo2P.11",
        "WePo2P.12",
        "WePo2P.13",
        "WePo2P.14",
        "WePo2P.15",
        "WePo2P.16",
        "WePo2P.17",
        "WePo2P.18",
        "WePo2P.19",
        "WePo2P.20",
        "WePo2P.21",
        "WePo2P.22",
        "WePo2P.23",
        "WePo2P.24",
        "WePo2P.25",
        "WePo2P.26",
        "WePo2P.27",
        "WePo2P.28",
        "WePo2P.29",
        "WePo2P.30",
        "WePo2P.31",
        "WePo2P.32",
        "WePo2P.33",
        "WePo2P.34",
        "WePo2P.35",
        "WePo2P.36",
        "WePo2P.37",
        "WePo2P.38",
        "WePo2P.39",
        "WePo2P.40",
        "WePo2P.41",
        "WePo2P.42",
        "WePo2P.43",
        "WePo2P.44",
        "WePo2P.45",
        "WePo2P.46",
        "WePo2P.47",
        "WePo2P.48",
        "WePo2P.49",
        "WePo2P.50"
      ]
    },
    {
      "id": "WePo3P",
      "title": "Poster Session 3",
      "type": "Poster Session",
      "date": "2026-10-28",
      "room": "3F Lobby",
      "start": "16:10",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p",
      "people": [
        {
          "role": "Chair",
          "name": "Joe, Hyun-Min",
          "affiliation": "Kyungpook National University"
        },
        {
          "role": "Co-Chair",
          "name": "Shin, Won Dong",
          "affiliation": "POSTECH"
        }
      ],
      "papers": [
        "WePo3P.1",
        "WePo3P.2",
        "WePo3P.3",
        "WePo3P.4",
        "WePo3P.5",
        "WePo3P.6",
        "WePo3P.7",
        "WePo3P.8",
        "WePo3P.9",
        "WePo3P.10",
        "WePo3P.11",
        "WePo3P.12",
        "WePo3P.13",
        "WePo3P.14",
        "WePo3P.15",
        "WePo3P.16",
        "WePo3P.17",
        "WePo3P.18",
        "WePo3P.19",
        "WePo3P.20",
        "WePo3P.21",
        "WePo3P.22",
        "WePo3P.23",
        "WePo3P.24",
        "WePo3P.25",
        "WePo3P.26",
        "WePo3P.27",
        "WePo3P.28",
        "WePo3P.29",
        "WePo3P.30",
        "WePo3P.31",
        "WePo3P.32",
        "WePo3P.33",
        "WePo3P.34",
        "WePo3P.35",
        "WePo3P.36",
        "WePo3P.37",
        "WePo3P.38",
        "WePo3P.39",
        "WePo3P.40",
        "WePo3P.41",
        "WePo3P.42",
        "WePo3P.43",
        "WePo3P.44",
        "WePo3P.45",
        "WePo3P.46",
        "WePo3P.47",
        "WePo3P.48",
        "WePo3P.49"
      ]
    },
    {
      "id": "ThAT1",
      "title": "Control Theory and Applications 2",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Palace Hall, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that1",
      "people": [
        {
          "role": "Chair",
          "name": "Song, Sukho",
          "affiliation": "DGIST (Daegu Gyeongbuk Institute of Science and Technology)"
        }
      ],
      "papers": [
        "ThAT1.1",
        "ThAT1.2",
        "ThAT1.3",
        "ThAT1.4",
        "ThAT1.5",
        "ThAT1.6"
      ]
    },
    {
      "id": "ThAT2",
      "title": "Physical AI and Military Robots 2",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Cattleya, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that2",
      "people": [
        {
          "role": "Chair",
          "name": "Cha, Dowan",
          "affiliation": "Korea National Defense University"
        },
        {
          "role": "Organizer",
          "name": "Cha, Dowan",
          "affiliation": "Korea National Defense University"
        }
      ],
      "papers": [
        "ThAT2.1",
        "ThAT2.2",
        "ThAT2.3",
        "ThAT2.4",
        "ThAT2.5",
        "ThAT2.6"
      ]
    },
    {
      "id": "ThAT3",
      "title": "SICE-ICROS Joint OS: Robot Technology and Its Application 1",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Azalea, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that3",
      "people": [
        {
          "role": "Chair",
          "name": "Hasegawa, Tadahiro",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "role": "Organizer",
          "name": "Hasegawa, Tadahiro",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "role": "Organizer",
          "name": "Jin, Sangrok",
          "affiliation": "Pusan National University"
        }
      ],
      "papers": [
        "ThAT3.1",
        "ThAT3.2",
        "ThAT3.3",
        "ThAT3.4",
        "ThAT3.5"
      ]
    },
    {
      "id": "ThAT4",
      "title": "Navigation, Guidance and Control 3",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Lilac, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that4",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Daekyum",
          "affiliation": "Korea University"
        }
      ],
      "papers": [
        "ThAT4.1",
        "ThAT4.2",
        "ThAT4.3",
        "ThAT4.4",
        "ThAT4.5"
      ]
    },
    {
      "id": "ThAT5",
      "title": "Award Session 2",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Crown, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that5",
      "people": [
        {
          "role": "Chair",
          "name": "Park, Sukho",
          "affiliation": "DGIST"
        }
      ],
      "papers": [
        "ThAT5.1",
        "ThAT5.2",
        "ThAT5.3",
        "ThAT5.4",
        "ThAT5.5",
        "ThAT5.6"
      ]
    },
    {
      "id": "ThAT6",
      "title": "Robotic Applications 1",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony A, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that6",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Sanghyun",
          "affiliation": "Kyung Hee University"
        }
      ],
      "papers": [
        "ThAT6.1",
        "ThAT6.2",
        "ThAT6.3",
        "ThAT6.4",
        "ThAT6.5",
        "ThAT6.6"
      ]
    },
    {
      "id": "ThAT7",
      "title": "Artificial Intelligence Systems 3",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony B, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that7",
      "people": [
        {
          "role": "Chair",
          "name": "Kong, Kyoungchul",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "papers": [
        "ThAT7.1",
        "ThAT7.2",
        "ThAT7.3",
        "ThAT7.4",
        "ThAT7.5",
        "ThAT7.6"
      ]
    },
    {
      "id": "ThAT8",
      "title": "Recent Advancements in Machine Learning Techniques for Intelligent Systems 3",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony C, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that8",
      "people": [
        {
          "role": "Chair",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        },
        {
          "role": "Organizer",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "papers": [
        "ThAT8.1",
        "ThAT8.2",
        "ThAT8.3",
        "ThAT8.4",
        "ThAT8.5"
      ]
    },
    {
      "id": "ThAT9",
      "title": "Autonomous Vehicle Systems 1",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony D, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that9",
      "people": [
        {
          "role": "Chair",
          "name": "Kwon, Cheolhyeon",
          "affiliation": "Ulsan National Institute of Science and Technology"
        }
      ],
      "papers": [
        "ThAT9.1",
        "ThAT9.2",
        "ThAT9.3",
        "ThAT9.4",
        "ThAT9.5",
        "ThAT9.6"
      ]
    },
    {
      "id": "ThPL",
      "title": "Plenary Lecture Ⅱ (Prof. Hiroyuki Shinoda, Japan)",
      "type": "Plenary Lecture",
      "date": "2026-10-29",
      "room": "Palace Hall, 3F",
      "start": "10:40",
      "end": "11:40",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpl",
      "people": [
        {
          "role": "Chair",
          "name": "Seo, TaeWon",
          "affiliation": "Hanyang University"
        }
      ],
      "papers": []
    },
    {
      "id": "ThKN",
      "title": "Keynote Speech Ⅲ (Prof. Sarthak Pathak) & Ⅳ (Prof. Jiyeon Kang)",
      "type": "",
      "date": "2026-10-29",
      "room": "Palace Hall, 3F",
      "start": "13:00",
      "end": "14:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thkn",
      "people": [
        {
          "role": "Chair",
          "name": "Cha, Youngsu",
          "affiliation": "Korea University"
        }
      ],
      "papers": []
    },
    {
      "id": "ThFrS",
      "title": "Frontiers Session 2",
      "type": "",
      "date": "2026-10-29",
      "room": "Palace Hall, 3F",
      "start": "14:20",
      "end": "15:20",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thfrs",
      "people": [
        {
          "role": "Chair",
          "name": "Lee, Alex",
          "affiliation": "Sookmyung Women’s University"
        }
      ],
      "papers": []
    },
    {
      "id": "ThBT2",
      "title": "Robotics Technologies for Surgery and Intervention",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Cattleya, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt2",
      "people": [
        {
          "role": "Chair",
          "name": "Choi, Jaesoon",
          "affiliation": "University of Ulsan College of Medicine / Asan Medical Center"
        },
        {
          "role": "Organizer",
          "name": "Choi, Jaesoon",
          "affiliation": "University of Ulsan College of Medicine / Asan Medical Center"
        }
      ],
      "papers": [
        "ThBT2.1",
        "ThBT2.2",
        "ThBT2.3",
        "ThBT2.4",
        "ThBT2.5"
      ]
    },
    {
      "id": "ThBT3",
      "title": "SICE-ICROS Joint OS: Robot Technology and Its Application 2",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Azalea, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt3",
      "people": [
        {
          "role": "Chair",
          "name": "Jin, Sangrok",
          "affiliation": "Pusan National University"
        },
        {
          "role": "Organizer",
          "name": "Hasegawa, Tadahiro",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "role": "Organizer",
          "name": "Jin, Sangrok",
          "affiliation": "Pusan National University"
        }
      ],
      "papers": [
        "ThBT3.1",
        "ThBT3.2",
        "ThBT3.3",
        "ThBT3.4"
      ]
    },
    {
      "id": "ThBT4",
      "title": "Robot Mechanism and Control 1",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Lilac, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt4",
      "people": [
        {
          "role": "Chair",
          "name": "Ogawa, Katsushi",
          "affiliation": "Osaka Electro-Communication University"
        }
      ],
      "papers": [
        "ThBT4.1",
        "ThBT4.2",
        "ThBT4.3",
        "ThBT4.4",
        "ThBT4.5",
        "ThBT4.6"
      ]
    },
    {
      "id": "ThBT5",
      "title": "Koh Young AI Competition (15: 40-16: 50)",
      "type": "",
      "date": "2026-10-29",
      "room": "Crown, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt5",
      "people": [
        {
          "role": "Chair",
          "name": "Han, Soohee",
          "affiliation": "Pohang University of Science and Technology ( POSTECH )"
        }
      ],
      "papers": []
    },
    {
      "id": "ThBT6",
      "title": "Robotic Applications 2",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony A, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt6",
      "people": [
        {
          "role": "Chair",
          "name": "Oh, Yoonseon",
          "affiliation": "Hanyang University"
        }
      ],
      "papers": [
        "ThBT6.1",
        "ThBT6.2",
        "ThBT6.3",
        "ThBT6.4",
        "ThBT6.5",
        "ThBT6.6"
      ]
    },
    {
      "id": "ThBT7",
      "title": "Artificial Intelligence Systems 4",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony B, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt7",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Daekyum",
          "affiliation": "Korea University"
        }
      ],
      "papers": [
        "ThBT7.1",
        "ThBT7.2",
        "ThBT7.3",
        "ThBT7.4",
        "ThBT7.5",
        "ThBT7.6"
      ]
    },
    {
      "id": "ThBT8",
      "title": "Data-Driven Intelligence in Process Control and Robotics",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony C, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt8",
      "people": [
        {
          "role": "Chair",
          "name": "Oh, Tae Hoon",
          "affiliation": "UNIST"
        },
        {
          "role": "Organizer",
          "name": "Oh, Tae Hoon",
          "affiliation": "UNIST"
        },
        {
          "role": "Organizer",
          "name": "Lee, Jong Min",
          "affiliation": "Seoul National University"
        },
        {
          "role": "Organizer",
          "name": "Kim, Jong Woo",
          "affiliation": "Incheon National University"
        },
        {
          "role": "Organizer",
          "name": "Jeong, Dong Hwi",
          "affiliation": "University of Ulsan"
        }
      ],
      "papers": [
        "ThBT8.1",
        "ThBT8.2",
        "ThBT8.3",
        "ThBT8.4",
        "ThBT8.5"
      ]
    },
    {
      "id": "ThBT9",
      "title": "Autonomous Vehicle Systems 2",
      "type": "Oral Session",
      "date": "2026-10-29",
      "room": "Symphony D, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt9",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Jinwhan",
          "affiliation": "KAIST"
        }
      ],
      "papers": [
        "ThBT9.1",
        "ThBT9.2",
        "ThBT9.3",
        "ThBT9.4",
        "ThBT9.5",
        "ThBT9.6"
      ]
    },
    {
      "id": "ThPo4P",
      "title": "Poster Session 4",
      "type": "Poster Session",
      "date": "2026-10-29",
      "room": "3F Lobby",
      "start": "09:30",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Donghan",
          "affiliation": "Kyung Hee University"
        },
        {
          "role": "Co-Chair",
          "name": "Park, Daehyung",
          "affiliation": "Korea Advanced Institute of Science and Technology, KAIST"
        }
      ],
      "papers": [
        "ThPo4P.1",
        "ThPo4P.2",
        "ThPo4P.3",
        "ThPo4P.4",
        "ThPo4P.5",
        "ThPo4P.6",
        "ThPo4P.7",
        "ThPo4P.8",
        "ThPo4P.9",
        "ThPo4P.10",
        "ThPo4P.11",
        "ThPo4P.12",
        "ThPo4P.13",
        "ThPo4P.14",
        "ThPo4P.15",
        "ThPo4P.16",
        "ThPo4P.17",
        "ThPo4P.18",
        "ThPo4P.19",
        "ThPo4P.20",
        "ThPo4P.21",
        "ThPo4P.22",
        "ThPo4P.23",
        "ThPo4P.24",
        "ThPo4P.25",
        "ThPo4P.26",
        "ThPo4P.27",
        "ThPo4P.28",
        "ThPo4P.29",
        "ThPo4P.30",
        "ThPo4P.31",
        "ThPo4P.32",
        "ThPo4P.33",
        "ThPo4P.34",
        "ThPo4P.35",
        "ThPo4P.36",
        "ThPo4P.37",
        "ThPo4P.38",
        "ThPo4P.39",
        "ThPo4P.40",
        "ThPo4P.41",
        "ThPo4P.42",
        "ThPo4P.43",
        "ThPo4P.44",
        "ThPo4P.45",
        "ThPo4P.46",
        "ThPo4P.47",
        "ThPo4P.48",
        "ThPo4P.49",
        "ThPo4P.50"
      ]
    },
    {
      "id": "ThPo5P",
      "title": "Poster Session 5",
      "type": "Poster Session",
      "date": "2026-10-29",
      "room": "3F Lobby",
      "start": "16:10",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p",
      "people": [
        {
          "role": "Chair",
          "name": "Hong, Seungwoo",
          "affiliation": "Korea University"
        },
        {
          "role": "Co-Chair",
          "name": "Lee, Seongwon",
          "affiliation": "Kookmin University"
        }
      ],
      "papers": [
        "ThPo5P.1",
        "ThPo5P.2",
        "ThPo5P.3",
        "ThPo5P.4",
        "ThPo5P.5",
        "ThPo5P.6",
        "ThPo5P.7",
        "ThPo5P.8",
        "ThPo5P.9",
        "ThPo5P.10",
        "ThPo5P.11",
        "ThPo5P.12",
        "ThPo5P.13",
        "ThPo5P.14",
        "ThPo5P.15",
        "ThPo5P.16",
        "ThPo5P.17",
        "ThPo5P.18",
        "ThPo5P.19",
        "ThPo5P.20",
        "ThPo5P.21",
        "ThPo5P.22",
        "ThPo5P.23",
        "ThPo5P.24",
        "ThPo5P.25",
        "ThPo5P.26",
        "ThPo5P.27",
        "ThPo5P.28",
        "ThPo5P.29",
        "ThPo5P.30",
        "ThPo5P.31",
        "ThPo5P.32",
        "ThPo5P.33",
        "ThPo5P.34",
        "ThPo5P.35",
        "ThPo5P.36",
        "ThPo5P.37",
        "ThPo5P.38",
        "ThPo5P.39",
        "ThPo5P.40",
        "ThPo5P.41",
        "ThPo5P.42",
        "ThPo5P.43",
        "ThPo5P.44",
        "ThPo5P.45",
        "ThPo5P.46",
        "ThPo5P.47",
        "ThPo5P.48",
        "ThPo5P.49",
        "ThPo5P.50"
      ]
    },
    {
      "id": "ThBQT",
      "title": "Banquet",
      "type": "",
      "date": "2026-10-29",
      "room": "Palace Hall, 3F",
      "start": "18:00",
      "end": "20:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbqt",
      "people": [
        {
          "role": "Chair",
          "name": "Kang, Brian Byunghyun",
          "affiliation": "Sejong University"
        }
      ],
      "papers": []
    },
    {
      "id": "FrAT1",
      "title": "Control Theory and Applications 3",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Palace Hall, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat1",
      "people": [
        {
          "role": "Chair",
          "name": "Xiao, Qiang",
          "affiliation": "Huazhong University of Science and Technology"
        }
      ],
      "papers": [
        "FrAT1.1",
        "FrAT1.2",
        "FrAT1.3",
        "FrAT1.4",
        "FrAT1.5",
        "FrAT1.6"
      ]
    },
    {
      "id": "FrAT2",
      "title": "Human-Robot Interaction",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Cattleya, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat2",
      "people": [
        {
          "role": "Chair",
          "name": "Hur, Pilwon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "papers": [
        "FrAT2.1",
        "FrAT2.2",
        "FrAT2.3",
        "FrAT2.4",
        "FrAT2.5"
      ]
    },
    {
      "id": "FrAT3",
      "title": "Process Control Systems",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Azalea, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat3",
      "people": [
        {
          "role": "Chair",
          "name": "Kim, Jong Woo",
          "affiliation": "Incheon National University"
        }
      ],
      "papers": [
        "FrAT3.1",
        "FrAT3.2",
        "FrAT3.3",
        "FrAT3.4"
      ]
    },
    {
      "id": "FrAT4",
      "title": "Robot Mechanism and Control 2",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Lilac, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat4",
      "people": [
        {
          "role": "Chair",
          "name": "Sawada, Yuichi",
          "affiliation": "Kyoto Institute of Technology"
        }
      ],
      "papers": [
        "FrAT4.1",
        "FrAT4.2",
        "FrAT4.3",
        "FrAT4.4",
        "FrAT4.5",
        "FrAT4.6"
      ]
    },
    {
      "id": "FrAT5",
      "title": "Sensors and Signal Processing",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Crown, 3F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat5",
      "people": [
        {
          "role": "Chair",
          "name": "Itami, Taku",
          "affiliation": "Meiji University"
        }
      ],
      "papers": [
        "FrAT5.1",
        "FrAT5.2",
        "FrAT5.3",
        "FrAT5.4",
        "FrAT5.5"
      ]
    },
    {
      "id": "FrAT6",
      "title": "Robotic Applications 3",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Symphony A, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat6",
      "people": [
        {
          "role": "Chair",
          "name": "Joe, Hangil",
          "affiliation": "Kyungpook National University"
        }
      ],
      "papers": [
        "FrAT6.1",
        "FrAT6.2",
        "FrAT6.3",
        "FrAT6.4",
        "FrAT6.5",
        "FrAT6.6"
      ]
    },
    {
      "id": "FrAT7",
      "title": "Artificial Intelligence Systems 5",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Symphony B, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat7",
      "people": [
        {
          "role": "Chair",
          "name": "Nicodeme, Claire",
          "affiliation": "Alstom"
        }
      ],
      "papers": [
        "FrAT7.1",
        "FrAT7.2",
        "FrAT7.3",
        "FrAT7.4",
        "FrAT7.5"
      ]
    },
    {
      "id": "FrAT8",
      "title": "Robust Perception and Adaptive Control Systems for Industrial Intelligence",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Symphony C, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8",
      "people": [
        {
          "role": "Chair",
          "name": "Yun, Jong Pil",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "role": "Organizer",
          "name": "Yun, Jong Pil",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "role": "Organizer",
          "name": "Kim, Min Su",
          "affiliation": "KITECH"
        }
      ],
      "papers": [
        "FrAT8.1",
        "FrAT8.2",
        "FrAT8.3",
        "FrAT8.4",
        "FrAT8.5",
        "FrAT8.6",
        "FrAT8.7"
      ]
    },
    {
      "id": "FrAT9",
      "title": "Autonomous Vehicle Systems 3",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Symphony D, 4F",
      "start": "09:00",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat9",
      "people": [
        {
          "role": "Chair",
          "name": "Jung, Jongdae",
          "affiliation": "Chungnam National University"
        }
      ],
      "papers": [
        "FrAT9.1",
        "FrAT9.2",
        "FrAT9.3",
        "FrAT9.4",
        "FrAT9.5"
      ]
    },
    {
      "id": "FrPL",
      "title": "Plenary Lecture Ⅲ (Prof. Jean Oh, USA)",
      "type": "",
      "date": "2026-10-30",
      "room": "Palace Hall, 3F",
      "start": "10:40",
      "end": "11:40",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpl",
      "people": [
        {
          "role": "Chair",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "papers": []
    },
    {
      "id": "FrKN",
      "title": "Keynote Speech Ⅴ (Prof. Heejin Ahn) & Ⅵ (Prof. Joohyung Kim)",
      "type": "",
      "date": "2026-10-30",
      "room": "Palace Hall, 3F",
      "start": "13:00",
      "end": "14:00",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frkn",
      "people": [
        {
          "role": "Chair",
          "name": "Jo, HyungGi",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "papers": []
    },
    {
      "id": "FrFrS",
      "title": "Frontiers Session 3",
      "type": "",
      "date": "2026-10-30",
      "room": "Palace Hall, 3F",
      "start": "14:20",
      "end": "15:20",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frfrs",
      "people": [],
      "papers": []
    },
    {
      "id": "FrBT1",
      "title": "Control Theory and Applications 4",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Palace Hall, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt1",
      "people": [
        {
          "role": "Chair",
          "name": "Nakamura, Hisakazu",
          "affiliation": "Tokyo University of Science"
        }
      ],
      "papers": [
        "FrBT1.1",
        "FrBT1.2",
        "FrBT1.3",
        "FrBT1.4",
        "FrBT1.5"
      ]
    },
    {
      "id": "FrBT2",
      "title": "Industrial Applications of Control",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Cattleya, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt2",
      "people": [
        {
          "role": "Chair",
          "name": "Kang, Jiyeon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "papers": [
        "FrBT2.1",
        "FrBT2.2",
        "FrBT2.3",
        "FrBT2.4",
        "FrBT2.5"
      ]
    },
    {
      "id": "FrBT3",
      "title": "Robot Vision 2",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Azalea, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt3",
      "people": [
        {
          "role": "Chair",
          "name": "Noh, DongKi",
          "affiliation": "LG Electronics Inc"
        }
      ],
      "papers": [
        "FrBT3.1",
        "FrBT3.2",
        "FrBT3.3",
        "FrBT3.4",
        "FrBT3.5",
        "FrBT3.6"
      ]
    },
    {
      "id": "FrBT4",
      "title": "Robot Mechanism and Control 3",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Lilac, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt4",
      "people": [
        {
          "role": "Chair",
          "name": "Ban, Jaepil",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "papers": [
        "FrBT4.1",
        "FrBT4.2",
        "FrBT4.3",
        "FrBT4.4",
        "FrBT4.5",
        "FrBT4.6"
      ]
    },
    {
      "id": "FrBT5",
      "title": "Exoskeleton Robot",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Crown, 3F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt5",
      "people": [
        {
          "role": "Chair",
          "name": "Hur, Pilwon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "papers": [
        "FrBT5.1",
        "FrBT5.2",
        "FrBT5.3"
      ]
    },
    {
      "id": "FrBT6",
      "title": "Robotic Applications 4",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Symphony A, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt6",
      "people": [
        {
          "role": "Chair",
          "name": "Jin, Sangrok",
          "affiliation": "Pusan National University"
        }
      ],
      "papers": [
        "FrBT6.1",
        "FrBT6.2",
        "FrBT6.3",
        "FrBT6.4",
        "FrBT6.5"
      ]
    },
    {
      "id": "FrBT9",
      "title": "Autonomous Vehicle Systems 4",
      "type": "Oral Session",
      "date": "2026-10-30",
      "room": "Symphony D, 4F",
      "start": "15:40",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt9",
      "people": [
        {
          "role": "Chair",
          "name": "Jung, Jongdae",
          "affiliation": "Chungnam National University"
        }
      ],
      "papers": [
        "FrBT9.1",
        "FrBT9.2",
        "FrBT9.3"
      ]
    },
    {
      "id": "FrPo6P",
      "title": "Poster Session 6",
      "type": "Poster Session",
      "date": "2026-10-30",
      "room": "3F Lobby",
      "start": "09:30",
      "end": "10:30",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p",
      "people": [
        {
          "role": "Chair",
          "name": "Lee, Alex",
          "affiliation": "Sookmyung Women’s University"
        },
        {
          "role": "Co-Chair",
          "name": "Joe, Hyun-Min",
          "affiliation": "Kyungpook National University"
        }
      ],
      "papers": [
        "FrPo6P.1",
        "FrPo6P.2",
        "FrPo6P.3",
        "FrPo6P.4",
        "FrPo6P.5",
        "FrPo6P.6",
        "FrPo6P.7",
        "FrPo6P.8",
        "FrPo6P.9",
        "FrPo6P.10",
        "FrPo6P.11",
        "FrPo6P.12",
        "FrPo6P.13",
        "FrPo6P.15",
        "FrPo6P.16",
        "FrPo6P.17",
        "FrPo6P.18",
        "FrPo6P.19",
        "FrPo6P.20",
        "FrPo6P.21",
        "FrPo6P.22",
        "FrPo6P.23",
        "FrPo6P.24",
        "FrPo6P.25",
        "FrPo6P.26",
        "FrPo6P.27",
        "FrPo6P.28",
        "FrPo6P.29",
        "FrPo6P.30",
        "FrPo6P.31",
        "FrPo6P.32",
        "FrPo6P.33",
        "FrPo6P.34",
        "FrPo6P.35",
        "FrPo6P.36",
        "FrPo6P.37",
        "FrPo6P.38",
        "FrPo6P.39",
        "FrPo6P.40",
        "FrPo6P.41",
        "FrPo6P.42",
        "FrPo6P.43",
        "FrPo6P.44",
        "FrPo6P.45",
        "FrPo6P.46",
        "FrPo6P.47",
        "FrPo6P.48",
        "FrPo6P.49",
        "FrPo6P.50"
      ]
    },
    {
      "id": "FrPo7P",
      "title": "Poster Session 7",
      "type": "Poster Session",
      "date": "2026-10-30",
      "room": "3F Lobby",
      "start": "16:10",
      "end": "17:10",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p",
      "people": [
        {
          "role": "Chair",
          "name": "Park, Hae-Won",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "role": "Co-Chair",
          "name": "Seo, TaeWon",
          "affiliation": "Hanyang University"
        }
      ],
      "papers": [
        "FrPo7P.1",
        "FrPo7P.2",
        "FrPo7P.3",
        "FrPo7P.4",
        "FrPo7P.5",
        "FrPo7P.6",
        "FrPo7P.7",
        "FrPo7P.8",
        "FrPo7P.9",
        "FrPo7P.10",
        "FrPo7P.11",
        "FrPo7P.12",
        "FrPo7P.13",
        "FrPo7P.14",
        "FrPo7P.15",
        "FrPo7P.16",
        "FrPo7P.17",
        "FrPo7P.18",
        "FrPo7P.19",
        "FrPo7P.20",
        "FrPo7P.21",
        "FrPo7P.22",
        "FrPo7P.23",
        "FrPo7P.24",
        "FrPo7P.25",
        "FrPo7P.26",
        "FrPo7P.27",
        "FrPo7P.28",
        "FrPo7P.29",
        "FrPo7P.30",
        "FrPo7P.31",
        "FrPo7P.32",
        "FrPo7P.33",
        "FrPo7P.34",
        "FrPo7P.35",
        "FrPo7P.36",
        "FrPo7P.37",
        "FrPo7P.38",
        "FrPo7P.39",
        "FrPo7P.40",
        "FrPo7P.41",
        "FrPo7P.42",
        "FrPo7P.43",
        "FrPo7P.44",
        "FrPo7P.45",
        "FrPo7P.46",
        "FrPo7P.47"
      ]
    },
    {
      "id": "FrFW",
      "title": "Closing Ceremony",
      "type": "",
      "date": "2026-10-30",
      "room": "Palace Hall, 3F",
      "start": "17:30",
      "end": "17:40",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frfw",
      "people": [],
      "papers": []
    }
  ],
  "papers": [
    {
      "id": "TuPo1S.1",
      "paperId": "13",
      "title": "Clutch-Inspired Adaptive Gripping Via Unsupervised Mechanical Classification",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "520980",
          "name": "Rizvi, Syed",
          "affiliation": "Purdue University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Robotic grippers relying on fixed or PID-based control strategies fail to accommodate variations in object stiffness, leading to premature slip or crush damage. Inspired by force-dependent molecular clutch dynamics in biological cell adhesion, we developed a physics-based simulation framework integrating Bell-model clutch kinetics, stochastic Monte Carlo state transitions, and a spring-in-series gripper model. Mechanical features extracted from simulated interactions with objects drawn from the Yale-CMU-Berkeley (YCB) benchmark were partitioned into three mechanically distinct clusters using K-means, enabling cluster-specific optimal grip-force assignment without labelled object models. Across 20,000 Monte Carlo trials, the adaptive controller achieved a significantly longer mean time-to-slip compared to fixed-force control (Δ = 0.073 s; 95% bootstrap CI: [0.048, 0.099] s; permutation p = 5×10⁻⁵) and outperformed PID control (Δ = 0.031 s; CI: [0.001, 0.061] s; p = 0.046). These results demonstrate that bio-inspired stochastic mechanics paired with unsupervised classification can improve grip stability under object uncertainty, providing a principled framework for extending adaptive control to broader robotic manipulation tasks.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_01"
    },
    {
      "id": "TuPo1S.2",
      "paperId": "35",
      "title": "Development of a Lightweight VLM-Based Driver Monitoring Technology for Embedded Systems",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "524094",
          "name": "Kim, Suk Hyun",
          "affiliation": "Mobase Electronics"
        },
        {
          "id": "524159",
          "name": "Lee, Jae Hyeok",
          "affiliation": "Mobase Electronics"
        },
        {
          "id": "524157",
          "name": "Park, Sam Min",
          "affiliation": "Mobase Electronics"
        },
        {
          "id": "524158",
          "name": "Choi, Jun Sam",
          "affiliation": "Mobase Electronics"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "Recent advances in Vision-Language Models (VLMs) are opening new possibilities in the field of Driver Monitoring Systems (DMS). Conventional DMS approaches combine individual modules such as facial landmark detection, head pose estimation, and gaze tracking in a pipeline architecture, making them vulnerable to environmental variations like occlusion and backlighting, while also suffering from inter-module error propagation. To overcome these limitations, this paper proposes a real-time driver monitoring system for embedded environments that combines LoRA (Low-Rank Adaptation) fine-tuning and INT8 symmetric quantization based on Qwen3-VL-2B, a lightweight VLM. The proposed system performs LoRA fine-tuning on a dataset specialized for infrared camera imagery to adapt the model to the in-vehicle domain, while significantly reducing model size and computational cost through INT8 quantization. Experimental results on the NVIDIA Jetson AGX Orin platform demonstrate that the proposed model achieves approximately a 2.3× inference speedup (11.5 FPS) and a 44.2% reduction in GPU memory usage compared to the original FP16 model, while maintaining practical recognition performance with an average accuracy loss of less than 1.3% achieving 94.2% for drowsiness detection, 91.8% for gaze deviation detection, 95.5% for phone usage detection, and 91.0% for eating/drinking detection.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_02"
    },
    {
      "id": "TuPo1S.3",
      "paperId": "65",
      "title": "Latent Flow Matching for Uncertainty-Aware 3D Scene Graph Completion from Partial Robot Observations",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "462021",
          "name": "Naratama, Ida Bagus Dwiweka",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "408932",
          "name": "Winata, I Made Putra Arya",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "159267",
          "name": "Oh, Junghyun",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Robots exploring indoor environments often receive only partial observations of the surrounding scene, leav- ing unobserved objects and spatial relations unknown. We propose LatentSGC, a latent flow matching framework for uncertainty-aware 3D scene graph completion from partial robot observations. LatentSGC first uses a Graph Autoencoder to encode scene graphs into per-node latent slots, and then applies Conditional Flow Matching to complete the unobserved slots by integrating a learned ODE conditioned on the observed subgraph. Since each inference run starts from indepen- dent Gaussian noise, multiple samples produce diverse yet plausible completions, providing a probabilistic belief over hidden room structures rather than a single deterministic prediction. On a benchmark derived from HM3D-Semantics scenes at 30%, 50%, and 70% observation ratios, LatentSGC achieves Node F1 of 0.432 and Edge F1 of 0.255, outper- forming deterministic baselines by 0.187 in Node F1 and 0.166 in Edge F1. We further demonstrate the integration of LatentSGC with an RGB-D perception pipeline in Habitat Simulator on rooms unseen during training, where it produces plausible completions of unobserved room structures.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_03"
    },
    {
      "id": "TuPo1S.4",
      "paperId": "75",
      "title": "A Research on Improving Visibility in Poor Visibility Conditions Using Deep Learning",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525335",
          "name": "Obara, Yuki",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "407489",
          "name": "Yeo, Gilsu",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "407498",
          "name": "Cho, Myungjin",
          "affiliation": "Hankyong National University"
        },
        {
          "id": "407488",
          "name": "Lee, Min-Chul",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Scattering media such as fog and smoke introduces atmospheric degradation that significantly impairs visual contrast and spatial details in outdoor image. Although convolutional neural networks (CNNs), such as DehazeNet, effectively estimate localized transmission maps via physical atmospheric scattering models, they frequently fail to restore consistent structural data under dense and non-uniform haze conditions. To address these challenges, this paper proposes a novel end-to-end hybrid architecture that concurrently leverages local and global features. The proposed method applies to a symmetrical U-Net pathway to preserve sharp object contours and fine-grained textures alongside a parallel vision transformer (ViT) to model long-range environmental dependencies across the entire scene. These multi-scale representations are adaptively unified through a Cross-Attention mechanism. Furthermore, an uncertainty map is systematically generated to dynamically guide iterative training phases. Through quantitative and qualitative evaluations conducted on the Dense-haze dataset, we demonstrate that our algorithm substantially outperforms conventional benchmarks across gradient magnitude similarity deviation (GMSD), learned perceptual image patch similarity (LPIPS), and CIEDE2000 metrics.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_04"
    },
    {
      "id": "TuPo1S.5",
      "paperId": "82",
      "title": "LLM-Guided Automatic Reward Design for Humanoid Locomotion",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "373460",
          "name": "Kim, Mincheol",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "477267",
          "name": "Song, Gyuhyeun",
          "affiliation": "University of Seoul"
        },
        {
          "id": "477269",
          "name": "Park, Cheolmin",
          "affiliation": "KAIST"
        },
        {
          "id": "320847",
          "name": "Lee, Hyeonwoo",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Control Theory and Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Although large language models (LLMs) provide a promising interface for generating executable reward code, directly applying them to high-dimensional humanoid locomotion can be fragile, as a candidate that improves a scalar score may still induce undesirable behaviors such as excessive action oscillation or unstable foot placement. To address this issue, we propose Evidence-Gated Pareto Reflection (EGPR), a generation-based LLM-assisted reward evolution framework for humanoid locomotion. EGPR treats the LLM as a bounded reward-hypothesis generator and evaluates each candidate through structured training evidence, deterministic validation, and multi-objective Pareto reflection. Candidate rewards are materialized as separate local modules without modifying the original baseline reward implementation, and a deterministic validation gate filters out invalid or unsafe candidates before full training. After each generation, EGPR preserves Pareto-front candidates, metric-specific strengths, and diagnostic failure modes as structured evidence to guide the next generation of reward hypotheses. We validate EGPR on a 29-degree-of-freedom (DoF) Unitree G1 humanoid robot simulation environment. Experimental results demonstrate that EGPR successfully discovers balanced and transferable reward functions, significantly improving performance over existing approaches by reducing velocity tracking errors, improving energy efficiency (cost of transport), and enhancing control smoothness.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_05"
    },
    {
      "id": "TuPo1S.6",
      "paperId": "92",
      "title": "Hybrid Vision Inspection Combining YOLO-Seg and PatchCore for Manufacturing Quality Control: An Ablation Study and Distance Metric Analysis",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "523696",
          "name": "Lim, Byeongju",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "470730",
          "name": "Yoo, Young-Jun",
          "affiliation": "KITECH"
        },
        {
          "id": "465374",
          "name": "Won, Hong-In",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "480265",
          "name": "Tae, Hyunchul",
          "affiliation": "KITECH"
        },
        {
          "id": "510661",
          "name": "Kim, Hyo-Young",
          "affiliation": "Tech University of Korea (TUK)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "We present a hybrid vision inspection framework that couples YOLO-Seg instance segmentation with PatchCore anomaly detection for industrial quality control under spatial variability of components. Pixel-level segmentation masks define an inspection region that reduces contamination from the variable component, while a hierarchical decision rule simultaneously enforces component presence and surface integrity. We evaluate the system through (i) a seven-configuration ablation that probes the contributions of YOLO, the PatchCore memory bank, the bounding-box and segmentation-mask regions of interest (ROIs), and the hierarchical gate; (ii) a direct comparison of cosine and L2 distances under an identical memory bank with a scale-invariance analysis; (iii) standard binary-classification metrics (AUROC, precision, recall, and F1) alongside the normal-score range; and (iv) a backbone comparison that replaces ResNet-18 with the DINOv2-S vision transformer. On a 27-image exploratory rice-cooker evaluation corpus, the proposed cosine configuration achieves an accuracy of 0.741, F1 of 0.741, and AUROC of 0.929. It detects 10/17 FAIL samples while accepting all 10 PASS samples. Cosine and L2 yield identical rankings within matched ROIs, whereas native-scale calibration produces different thresholded operating points. Pipeline inference latency is 22.1 ms per image on an RTX 3090 GPU (45.3 FPS) and 341.4 ms on a single CPU thread. These observations require independent validation before autonomous release.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_06"
    },
    {
      "id": "TuPo1S.7",
      "paperId": "125",
      "title": "Towards Understanding Joint Attention Mechanism in Multimodal Diffusion Transformers for Enhanced Controllability in Text-Guided Image Editing",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525679",
          "name": "Nguyen, Quang Anh",
          "affiliation": "Seoul National University of Science and Technology"
        },
        {
          "id": "300422",
          "name": "Lee, Yeejin",
          "affiliation": "Seoul National University of Science and Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Multimedia Systems",
        "Robot Vision"
      ],
      "abstract": "Recent advancements in generative modeling have seen a paradigm shift from convolutional U-Net architectures to transformer-based backbones, most notably with the introduction of the Multi-modal Diffusion Transformer (MMDiT). While these models demonstrate unprecedented scale and high-fidelity synthesis, their capacity for precise, localized, and context-aware text-guided image editing remains underexplored. In this paper, we present a rigorous analysis of the MMDiT architecture, specifically investigating how its symmetric, dual-stream attention mechanism facilitates superior controllability compared to traditional cross-attention-based diffusion models. By leveraging the bidirectional information flow between text and visual latents, we demonstrate that MMDiT provides a more granular control surface for localized object manipulation and attribute binding. Furthermore, we conduct a comprehensive layer-wise ablation study on the FLUX.1 architecture using the PIE-Bench++ dataset to identify critical \"bottleneck\" blocks that govern semantic alignment. Our quantitative findings reveal a non-uniform distribution of structural importance, where specific mid-network blocks act as primary anchors for text-image grounding. Building on these insights, we propose a set of architectural refinements that enhance editing precision without requiring extensive retraining. Experimental results indicate that our approach significantly outperforms baseline diffusion-transformer models in both semantic consistency and structural preservation, providing a robust framework for high-precision, text-driven image manipulation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_07"
    },
    {
      "id": "TuPo1S.8",
      "paperId": "136",
      "title": "Selective Appearance Refinement for Feed-Forward 3D Gaussian Splatting",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "471686",
          "name": "Kim, Junho",
          "affiliation": "Kookmin University"
        },
        {
          "id": "525534",
          "name": "Kim, Jiseok",
          "affiliation": "KOOKMIN UNIVERSITY"
        },
        {
          "id": "223255",
          "name": "Lee, Seongwon",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Feed-forward 3D Gaussian Splatting has recently emerged as an efficient alternative to optimization-based 3DGS by reconstructing Gaussian scene representations directly from input images. While these methods substantially reduce inference cost, their predicted appearance attributes can remain imperfect, resulting in localized rendering errors even when the underlying scene geometry is reasonably accurate. In this work, we propose a lightweight refinement adaptor that improves the appearance of feed-forward Gaussian representations without altering their geometry. Starting from a frozen Gaussian predictor, our adaptor combines image features with rendered normal cues and camera-ray information to estimate residual updates for opacity and spherical harmonic coefficients. To avoid indiscriminate modification of all Gaussians, the adaptor additionally predicts a confidence value that controls the magnitude of each residual update. This allows the model to focus refinement on uncertain or poorly rendered regions while preserving reliable predictions. The adaptor is optimized using only image reconstruction objectives, requiring no additional supervision for geometry, camera parameters, or Gaussian regularization. Experiments on DL3DV under multiple input-view and camera calibration settings demonstrate consistent improvements over the original feed-forward model as well as ungated residual refinement. The results suggest that selectively correcting appearance attributes is an effective and computationally lightweight strategy for enhancing feed-forward 3DGS.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_08"
    },
    {
      "id": "TuPo1S.9",
      "paperId": "171",
      "title": "Contrastive Patch Descriptors Based Feature Matching Method Using Forward-Looking Sonar for Underwater Inspection",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525932",
          "name": "You, Donggil",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "502240",
          "name": "Kim, Dongsub",
          "affiliation": "POSTECH(Pohang University of Science and Technology)"
        },
        {
          "id": "502239",
          "name": "Kim, Minjong",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        },
        {
          "id": "505031",
          "name": "Yu, Jae-uck",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "148641",
          "name": "Yu, Son-Cheol",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Sensors and Signal Processing"
      ],
      "abstract": "Robust feature matching is the bottleneck for sonar-based underwater localization and mapping, a core ca- pability for inspecting submerged structures, where strong speckle noise and the scarcity of labeled real-world data limit learning-based methods. We present a contrastively learned (InfoNCE) patch descriptor for forward-looking sonar that is trained entirely in simulation, combined with a saliency-guided keypoint detector that exploits structure-tensor saliency to suppress speckle alongside a CFAR-style blob detector. Matched correspondences are verified with a Cartesian (fan) rigid model and passed to acoustic structure-from-motion (ASFM) for trajectory estimation. Using no real data and no fine-tuning, our descriptor transfers zero-shot to two real sonars—an open-water river survey and a water-tank experiment. On identical keypoints it substantially outperforms the hand-crafted AKAZE and ORB and the learning-based SONIC in simulation, remains on par with or better than these baselines on the real data, and, in trajectory estimation, achieves the lowest ATE on both sequences and the lowest RPE on the most challenging one.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_09"
    },
    {
      "id": "TuPo1S.10",
      "paperId": "177",
      "title": "Polynomially Calibrated Shared LoRA for Task-Incremental Heterogeneous Dense Prediction",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "454506",
          "name": "Park, Jong-Chan",
          "affiliation": "Korea University"
        },
        {
          "id": "471995",
          "name": "Park, Cheol Hoon",
          "affiliation": "Korea University"
        },
        {
          "id": "347438",
          "name": "Ahn, Woo Jin",
          "affiliation": "Inha University"
        },
        {
          "id": "116455",
          "name": "Lim, Myo-Taeg",
          "affiliation": "Korea University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "Multi-task dense prediction commonly assumes that all task annotations are jointly available for the same images. In practice, however, labels for semantic segmentation, depth estimation, and surface normal prediction are often collected asynchronously because they require different sensors, annotation pipelines, and costs. This motivates a task- incremental heterogeneous dense prediction setting, where a model sequentially acquires dense prediction tasks while retaining previously learned capabilities. In this paper, we study this setting under a parameter-efficient constraint: a frozen vision transformer backbone is equipped with a single task-shared LoRA module, while task-specific heads handle heterogeneous output spaces. Although this fixed-capacity shared adapter avoids task-wise parameter growth, standard LoRA provides only a linear low-rank residual, which can limit its expressiveness when adapting to heterogeneous dense prediction tasks. To improve the expressive capacity of the shared adapter without introducing task-specific adapter parameters, we propose Polynomially Calibrated LoRA, which augments the LoRA bottleneck with global polynomial activation calibration. Experiments on NYUv2 show that polynomial calibration provides a competitive nonlinear shared- adapter baseline for task-incremental dense prediction.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_10"
    },
    {
      "id": "TuPo1S.11",
      "paperId": "186",
      "title": "A Collaborative Perception Framework for Safe Autonomous Locomotive Operation Using Vision AI-Based Smart CCTV",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525888",
          "name": "Park, Kyeong-Beom",
          "affiliation": "POSCO"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Autonomous locomotive operation in industrial rail logistics faces significant safety challenges, particularly in safety blind spots and during pushing operations where onboard sensors have limited visibility. To address these issues, this paper proposes a collaborative perception framework using vision AI-based smart CCTV infrastructure in an integrated steel plant. The proposed framework integrates infrastructure-level perception with a centralized control system to support safe autonomous operation of molten iron transport locomotives between blast furnace and steelmaking plants. Multiple vision AI modules monitor the operational environment, including obstacle detection on railway tracks, signal recognition, and torpedo ladle car (TLC) status monitoring. The perception system combines deep learning-based object detection models with conventional computer vision algorithms to achieve reliable monitoring in complex industrial environments. To coordinate multiple locomotives, the centralized control system communicates with distributed vision AI servers through a TCP socket–based network. Experimental results using CCTV datasets collected from blast furnace and steelmaking plants demonstrate high recognition performance of the proposed modules. These results confirm that the proposed framework effectively reduces safety blind spots and enables safe autonomous locomotive operation in steel plant environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_11"
    },
    {
      "id": "TuPo1S.12",
      "paperId": "198",
      "title": "CAN-Based Heavy-Duty Truck Weight Estimation: A Dual-Phase Analysis of AI and Vehicle Dynamics",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525533",
          "name": "Kwon, Byeongkeun",
          "affiliation": "Graduate School of Data Science, Kyungpook National University"
        },
        {
          "id": "465629",
          "name": "You, Sesun",
          "affiliation": "Incheon National University"
        },
        {
          "id": "525535",
          "name": "Lee, Dain",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "525536",
          "name": "Seong, Dasom",
          "affiliation": "Graduate School of Data Science, Kyungpook National University"
        },
        {
          "id": "525919",
          "name": "Cho, Hyunjong",
          "affiliation": "SANGSINBRAKE"
        },
        {
          "id": "526043",
          "name": "Cho, Hyuntae",
          "affiliation": "Sangsing Brake"
        },
        {
          "id": "349255",
          "name": "Lee, Young Ok",
          "affiliation": "Korea National Open University"
        },
        {
          "id": "349263",
          "name": "Son, Young Seop",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "525580",
          "name": "Kim, Suhyeon",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing",
        "Control Devices and Instruments"
      ],
      "abstract": "Vehicle weight is a key hidden state in heavy-duty trucks because it affects longitudinal response, braking behavior, energy consumption, and vehicle-control performance. This study investigates a CAN-only weight estimation framework using real-vehicle driving data collected across different payload and speed conditions. The framework is designed as a dual-phase analysis, an AI phase and a vehicle-dynamics phase. The AI phase estimates vehicle weight from CAN time-series signals, while the vehicle-dynamics phase examines load-dependent vehicle responses from a physical perspective. Both phases use the same preprocessed CAN signal database, but they construct different input representations. In the AI phase, asynchronous CAN signals are synchronized at 50 Hz and converted into short-term multivariate windows. A lightweight MLP-Mixer is then used to learn temporal patterns and feature-wise relationships among selected CAN features. The dynamics analysis further supports that the selected CAN signals are physically meaningful and can complement the AI-based estimation phase. The results show that CAN time-series signals contain useful information for onboard weight estimation without additional load sensors or roadside weighing infrastructure.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_12"
    },
    {
      "id": "TuPo1S.13",
      "paperId": "209",
      "title": "VLA Robotic System with VLM Supervision for Parts Kitting in Manufacturing Assembly",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "319740",
          "name": "Moon, JongSul",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "185955",
          "name": "Kim, YoungOuk",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "203067",
          "name": "Shin, Dongin",
          "affiliation": "Korea Electronics Technology Institute"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Robotic Applications"
      ],
      "abstract": "Parts kitting --- arranging components in a tray for downstream assembly --- in manufacturing is a difficult task to automate due to the requirement that parts arrive in arbitrary poses and must be placed precisely into designated tray. We propose a closed-loop kitting system that performs manipulation with a vision-language-action (VLA) policy and integrates a vision-language model (VLM)-based task planner and manager as a supervisory upper layer. The task planner decomposes a high-level kitting command into a sequence of subtasks executable by the VLA policy, while the task manager monitors the environment during execution, detects failures, and triggers re-planning by the planner. The two components share a single VLM, conforming to the resource constraints of the edge node. In addition, we compare candidate action/state representations for the manipulation policy under identical conditions and confirm that the 6D rotation representation is most effective for motions involving large wrist rotation behavior. In real-robot evaluation, the proposed VLM-supervised closed-loop system improves the overall kitting success rate from 60% to 85% over a standalone VLA policy, demonstrating that VLM supervision can effectively complement the silent failures of a single VLA policy.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_13"
    },
    {
      "id": "TuPo1S.14",
      "paperId": "213",
      "title": "Comparative Analysis of 3D Reconstruction Methods for Non-Cooperative Space Targets under Viewpoint Variations with Controlled Illumination",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "407725",
          "name": "Koo, Keonwoo",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "461085",
          "name": "Jo, Hyeon-Myeong",
          "affiliation": "Gyeongsang National University"
        },
        {
          "id": "461086",
          "name": "Kim, Jaekwang",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "461096",
          "name": "Choi, Myungchul",
          "affiliation": "Korea National University of Science and Technology"
        },
        {
          "id": "521635",
          "name": "Koo, A Yeong",
          "affiliation": "UST"
        },
        {
          "id": "407729",
          "name": "Yun, Dongho",
          "affiliation": "Korea National University of Science and Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "3D reconstruction of non-cooperative space targets is a key technology for on-orbit servicing, where reconstruction methods must remain reliable under substantial viewpoint and illumination changes. This study comparatively evaluates Instant-NGP, 3DGS, 2DGS, GOF, and NVDiffRec using a synthetic multi-view benchmark comprising three controlled observation trajectories: horizontal circular observation around the target (Case 1), top-view circular observation (Case 2), and an approach-type spiral trajectory (Case 3). Four illumination conditions were applied to each trajectory. Performance was assessed using PSNR, SSIM, LPIPS, and rendering speed. 3DGS achieved the highest overall reconstruction fidelity, with an average PSNR of 53.71 dB, SSIM of 0.9975, and LPIPS of 0.0052. Its PSNR values were 52.83, 52.15, and 56.15 dB for Cases 1–3, respectively. The maximum PSNR difference was limited to 4.00 dB, indicating comparatively stable reconstruction quality across trajectory changes. However, its rendering speed decreased from 21.83 FPS in Case 1 to 13.33 FPS in Case 3, a reduction of approximately 38.9%, revealing a trade-off between reconstruction fidelity and computational efficiency. Excluding 3DGS, NVDiffRec showed the most consistent performance across trajectories. Its PSNR ranged from 40.79 to 45.09 dB, with a maximum difference of 4.30 dB, while SSIM remained within 0.9899–0.9944 and rendering speed within 22.57–23.53 FPS. Its maximum FPS variation was only approximately 4.1%, indicating stable computational performance across trajectory changes. In contrast, 2DGS and GOF showed PSNR reductions of 14.01 dB and 14.73 dB, respectively, in Case 3 relative to their best-performing cases, demonstrating greater sensitivity to the approach-type spiral trajectory. These results indicate that reconstruction quality and computational stability depend strongly on both the reconstruction method and observation geometry.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_14"
    },
    {
      "id": "TuPo1S.15",
      "paperId": "217",
      "title": "Active Vision for Robust Visuomotor Policy under Positional Variations",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "397517",
          "name": "Lee, Yonghee",
          "affiliation": "Seoul National University"
        },
        {
          "id": "397518",
          "name": "Yoon, Junheon",
          "affiliation": "Seoul National University"
        },
        {
          "id": "278252",
          "name": "Baek, Woo-Jeong",
          "affiliation": "Seoul National University, Karlsruhe Institute of Technology"
        },
        {
          "id": "255221",
          "name": "Lee, Haeseong",
          "affiliation": "Seoul National University"
        },
        {
          "id": "101200",
          "name": "Park, Jaeheung",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Visuomotor policies have become a prominent approach for robot manipulation, mapping observations directly to control actions. However, their performance degrades substantially under out-of-distribution conditions, such as novel object positions or changes in camera viewpoint. While prior works address this by scaling up demonstration datasets, such approaches compromise data efficiency. This paper presents a data-efficient visuomotor policy framework that leverages active vision. The proposed method employs an open-vocabulary object detector and represents the robot state and actions in the camera coordinate frame. By actively repositioning the camera to align the perceived object position with the training distribution, the policy can manipulate objects at previously unseen locations without additional data collection. Experiments on a humanoid robot and a dual-manipulator system, in both simulation and the real world, show that the proposed framework substantially outperforms state-of-the-art baselines, raising the Pick-and-Place task success rate in out-of-distribution region from 56% to 88%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_15"
    },
    {
      "id": "TuPo1S.16",
      "paperId": "234",
      "title": "CVAR: Cross-View Attention Refinement for Image Retrieval Reranking",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525802",
          "name": "Byeon, Sangho",
          "affiliation": "Kookmin University"
        },
        {
          "id": "223255",
          "name": "Lee, Seongwon",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Multimedia Systems",
        "Robot Vision"
      ],
      "abstract": "Image retrieval has largely benefited from compact global descriptors and learned reranking, yet distinguishing hard candidates remains challenging when images share repeated structures, similar layouts, or partial visual overlap. In this work, we revisit cross-view attention from pretrained cross-view completion models as a source of pairwise evidence for image retrieval. While recent studies show that such attention maps contain rich correspondence cues, they are not directly optimized for retrieval scoring and often include noisy or ambiguous activations. We propose CVAR, a Cross-View Attention-based Reranker that transforms raw cross-attention maps into discriminative query-candidate similarity scores. CVAR extracts cross-attention maps from a cross-view completion backbone and refines them using ARM, a 4D transformer-based Attention Map Refinement Module that preserves the joint spatial structure of the query and candidate token grids. ARM denoises layer-wise attention responses, aggregates correspondence patterns across views, and outputs an image-level score for reranking. We train CVAR with symmetric pairwise supervision and hard-negative sampling. Experiments on ROxford5k and RParis6k show that CVAR improves both local-feature and global-feature rerankers, especially under Hard and 1M-distractor settings.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_16"
    },
    {
      "id": "TuPo1S.17",
      "paperId": "238",
      "title": "Runtime-Safeguarded LLM Supervisory Control for Multi-Energy Systems under Prompt Perturbations",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461720",
          "name": "Song, Gihoon",
          "affiliation": "Hanyang Univ"
        },
        {
          "id": "248917",
          "name": "Guan, Yongpei",
          "affiliation": "University of Florida"
        },
        {
          "id": "349314",
          "name": "Kang, Chang Mook",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Civil and Urban Control Systems"
      ],
      "abstract": "Large language models (LLMs) are increasingly considered as high-level supervisory modules for cyber physical and energy systems. However, semantic alignment with a user prompt does not necessarily imply safe closed loop behavior when LLM outputs affect control-relevant decisions. This paper studies this issue in a multi-energy system (MES) supervisory control setting, where an LLM selects blending weights over economic, emission-oriented, and comfort-oriented model predictive control (MPC) experts. We compare prompt sanitization, runtime safe-floor correction, and their combined guardrail variant. Prompt sanitization rewrites risky or contradictory requests, whereas safe-floor correction directly enforces a minimum comfort-controller weight under safety-sensitive conditions. Experiments are conducted using five policies, twelve prompts, six scenarios, and three repeated trials, resulting in 1080 closed-loop runs. Results show that the rule-based supervisor achieves the lowest cost and CO2 ratios but exhibits larger comfort error, hard thermal violation hours, and safety-filter intervention rate. Among the LLM-family policies, LLM+Safe-floor achieves the strongest comfort-related safety behavior. In contrast, prompt sanitization improves alignment but does not consistently improve runtime safety.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_17"
    },
    {
      "id": "TuPo1S.18",
      "paperId": "254",
      "title": "Vehicle Attachment Detection Via Viewpoint-Aware Hypergraph Learning for Automatic Car Wash Systems",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461788",
          "name": "Lim, HyeongSeop",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "409413",
          "name": "Nam, Changwoo",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "281952",
          "name": "Lee, Sang Jun",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Sensors and Signal Processing"
      ],
      "abstract": "The rotating brushes of an automatic vehicle wash can damage protruding exterior parts, so such attachments must be detected before each cleaning cycle. Detectors based on deep learning, however, perform poorly on attachments that are uncommon in real wash data, producing missed and false detections because the scarce examples are insufficient to capture their visual variation. We note that vehicle components keep a consistent spatial arrangement when viewed from the entry camera, since each body region reliably hosts the same parts across vehicles. Motivated by this regularity, we couple a YOLOv11 backbone with hypergraph-based relational reasoning to counter the data scarcity. The proposed viewpoint-prior hypergraph transformer module models semantic relations among attachments under each camera viewpoint, letting the detector rely on learned co-occurrence when a part's visual signal is weak. Tested on images gathered at an operating wash facility, the method reaches 71.3% mAP50--95 and exceeds D-FINE and a recent graph-based detector by 3.8 and 1.4 points.These findings suggest that reasoning over viewpoint-aware hypergraphs yields dependable detection when training data are limited, contributing to safer unattended vehicle washing.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_18"
    },
    {
      "id": "TuPo1S.19",
      "paperId": "262",
      "title": "Block-Based Crowd People Counting Using Depth Estimation and Bird’s-Eye View Transformation",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526203",
          "name": "Park, Ju-Ryong",
          "affiliation": "Kyungsung University"
        },
        {
          "id": "407794",
          "name": "Park, Jang-Sik",
          "affiliation": "Kyungsung University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "Accurate crowd people counting in physical space is essential for practical crowd safety management systems. Most of crowd counting methods estimate density maps on an image plane that projects a 3D space onto 2D plane, so crowd counting or density estimates are distorted. In this paper, considering statistical characteristics in 3D space is proposed. The proposed crowd people counting consists of two stages: a crowd people counting stage that incorporates depth and zero-inflated Poisson distribution, and a stage that transforms into a bird’s-eye-view 3D space through homography transformation. In the first stage, a crowd density map is estimated using EBC-ZIP model with depth-based correction applied. In the second stage, the crowd density map is mapped to the bird’s-eye view space through homography transformation. Camera parameters are estimated through Canny edge detection, Hough transformation, and vanishing point detection using RANSAC. The physical distance of the ROI is restored using the depth map estimated in Step 1, and a homography matrix is derived. Using a discrete block projection method, the center of each block is mapped to the bird’s-eye view plane using the homography matrix. Counting performance is improved by suppressing density diffusion caused by conventional pixel-level warping. In this paper, simulation results on the ShanghaiTech part A and RGBD datasets demonstrate the effectiveness of the proposed method, and bird’s-eye-view projection evaluation on real-world crowd scenario videos confirms geometrically consistent crowd localization.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_19"
    },
    {
      "id": "TuPo1S.20",
      "paperId": "264",
      "title": "Event-Driven Keyframe Scheduling for Efficient Online 3D Gaussian SLAM",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526206",
          "name": "Park, Minjun",
          "affiliation": "Seoul National University of Science and Technology"
        },
        {
          "id": "300422",
          "name": "Lee, Yeejin",
          "affiliation": "Seoul National University of Science and Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Dynamic objects significantly degrade both tracking and mapping in online 3D Gaussian splatting-based SLAM. Existing uncertainty-aware methods improve robustness, but impose substantial computational overhead through repeated uncertainty inference and frequent global optimization. This paper reformulates dynamic-scene 3DGS-SLAM as a computation allocation problem and presents an event-driven uncertainty-aware online SLAM framework. The proposed method employs a lightweight affine uncertainty model, removes hard online depth filtering through uncertainty-weighted bundle adjustment, and adaptively schedules global optimization using drift and uncertainty-conflict observers. Experiments on dynamic benchmarks demonstrate that the proposed approach improves the dataset-average online trajectory accuracy while achieving approximately 13x higher online throughput and reducing tracker keyframe usage by 48--57% compared with the existing method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_20"
    },
    {
      "id": "TuPo1S.21",
      "paperId": "269",
      "title": "Lightweight Adaptation of Protein Language Models for Accurate Lysine Crotonylation Site Prediction",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526195",
          "name": "Hassan, Mir Tanveerul",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "526197",
          "name": "Kareem, Irfan Ul",
          "affiliation": "Central University of Kashmir"
        },
        {
          "id": "526199",
          "name": "Gaffar, Saima",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "281952",
          "name": "Lee, Sang Jun",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Lysine crotonylation (Kcr) is an important post-translational modification that plays critical roles in transcriptional regulation, chromatin remodeling, cellular differentiation, and disease progression. Although numerous computational predictors have been developed for Kcr site identification, existing methods often rely on handcrafted sequence descriptors or computationally expensive deep learning architectures, limiting their predictive performance and practical applicability. In this study, we propose Pred-KCr, a hybrid framework that integrates a lightweight protein language model with ensemble machine learning models for accurate and efficient Kcr site prediction. Specifically, we employ the ESM2-35M protein language model and adopt a partial fine-tuning strategy in which the first nine transformer layers are frozen while the last three layers are fine-tuned on Kcr-specific data. The resulting task-adapted embeddings are subsequently used to train multiple machine learning classifiers. Comprehensive experiments conducted on the independent dataset demonstrate that partial fine-tuning substantially enhances the discriminative capability of the learned representations compared with pre-trained embeddings alone. Among the evaluated classifiers, CatBoost achieved the best overall performance and was selected as the final predictor. On the independent test set, Pred-KCr attained an accuracy of 0.879, sensitivity of 0.888, specificity of 0.870, Matthews correlation coefficient of 0.758, and an area under the receiver operating characteristic curve of 0.943. Furthermore, bootstrap analysis confirmed the robustness and stability of the proposed framework. Comparative evaluation against existing state-of-the-art Kcr predictors showed that Pred-KCr consistently outperformed competing methods across all major performance metrics. These results demonstrate that combining partial fine-tuning of lightweight protein language models with ensemble learning provides an effective and computationally efficient strategy for lysine crotonylation site prediction.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_21"
    },
    {
      "id": "TuPo1S.22",
      "paperId": "274",
      "title": "Spatial-Prior Supervised Contrastive Learning for Robust Traffic Controller Detection in Autonomous Driving",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461635",
          "name": "Kim, Sangho",
          "affiliation": "Yonsei University"
        },
        {
          "id": "461836",
          "name": "Baik, Seunghyun",
          "affiliation": "Yonsei University"
        },
        {
          "id": "462158",
          "name": "Lee, Youngjo",
          "affiliation": "Yonsei University"
        },
        {
          "id": "107310",
          "name": "Kim, Euntai",
          "affiliation": "Yonsei University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Distinguishing traffic controllers (TCs) from regular pedestrians is critical for autonomous driving, yet conventional detectors suffer from severe semantic confusion due to shared structural similarities. To resolve this feature entanglement, we propose Spatial-Prior Supervised Contrastive Learning (SP-SCL). By injecting a human visual prior, SP-SCL introduces a spatial constraint that explicitly guides the model to focus on discriminative upper-body attributes (e.g., helmets, vests) while ignoring identical lower-body features. Experiments on YOLOv11 demonstrate that SP-SCL successfully disentangles the feature space, eliminating critical misclassifications and achieving a 4.5% absolute improvement in overall mAP.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_22"
    },
    {
      "id": "TuPo1S.23",
      "paperId": "279",
      "title": "Crowd Activity Recognition and Natural-Language Captioning Via Optical-Flow Embeddings",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "407793",
          "name": "Wesonga, Sheilla",
          "affiliation": "Kyungsung University"
        },
        {
          "id": "407794",
          "name": "Park, Jang-Sik",
          "affiliation": "Kyungsung University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Accurate recognition of crowd activity patterns and the generation of natural-language descriptions of those patterns are complementary tasks with practical value in public-safety monitoring, event management, and urban planning. We present a lightweight multi-task framework that jointly addresses both objectives by fusing pre-computed Farneback optical-flow embeddings with frozen CLIP image and text features through a cross-modal attention module. A single mean-pool encoder maps 100 per-frame flow vectors into a 512-dimensional motion representation aligned with the CLIP embedding space. The fused representation is routed to three output heads: an 11-class focal-loss classifier for crowd activity type, a Zero-Inflated Poisson count head for pedestrian density estimation, and a fine-tuned distilGPT-2 decoder for natural-language caption generation. Evaluated on the Crowd-11 benchmark (910 test samples, 11 classes), our method achieves 80.4% accuracy and 0.784 macro-F1, surpassing VideoMAE (78.0%) and TimeSformer (66.7%) while requiring only pre-computed flow features at inference time. Caption quality (BLEU-4 = 4.64, ROUGE-L = 26.60, CLIPScore = 0.621) is competitive with CLIPCap, a dedicated captioning baseline, demonstrating that strong captioning performance can be obtained from the same lightweight representation used for classification.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_23"
    },
    {
      "id": "TuPo1S.24",
      "paperId": "286",
      "title": "A Hybrid Control Framework Using Reinforcement Learning for Dynamic Robotic Manipulation and Sim-To-Real Transfer",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "509012",
          "name": "Mayer, Patrick Thomas",
          "affiliation": "Bielefeld University of Applied Sciences and Arts"
        },
        {
          "id": "375215",
          "name": "Rexilius, Jan",
          "affiliation": "Bielefeld University of Applied Sciences and Arts"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a hybrid control architecture for dynamic robotic picking tasks. The framework combines a Deep Reinforcement Learning policy for high-level interception with a dedicated Inverse Kinematics controller for precise terminal grasping, while mitigating precision limitations of monolithic learning-based approaches. The framework utilizes a Proximal Policy Optimization agent to approach moving targets, seamlessly transitioning to an Inverse Kinematics solver that reduces terminal orientational and positional errors while minimizing cumulative control effort. To facilitate deployment on physical hardware, a robust sim-to-real pipeline incorporating system identification, domain randomization, and latency injection is employed. Experimental results on a physical Franka Emika Panda manipulator validate this hybrid architecture. The system achieves an 80 % success rate in pick-and-place tasks, compared to 60.8 % for unadapted baselines, with no safety-critical violations such as joint limit breaches or collisions observed during testing.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_24"
    },
    {
      "id": "TuPo1S.25",
      "paperId": "288",
      "title": "Adaptive Temporal Compression for Video Understanding with MLLMs",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "386404",
          "name": "Sasaki, Tomoya",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "517750",
          "name": "Ohko, Yoshihisa",
          "affiliation": "National Institute of Advanced Industrial Science and Technology"
        },
        {
          "id": "103117",
          "name": "Yoshida, Eiichi",
          "affiliation": "Faculty of Advanced Engineering, Tokyo University of Science"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Understanding videos of work processes is essential for robot automation and has traditionally relied on manual analysis and annotation. Recently, multimodal large language models (MLLMs) have enabled the semantic interpretation of videos without human supervision. However, unedited videos recorded at work sites in real-world contexts tend to be long. Directly applying MLLMs to long video sequences leads to high computational costs and degraded performance. In this paper, we propose an adaptive temporal compression (ATC) method for video understanding. The proposed method reduces redundancy in less relevant segments based on frame-to-frame analysis and preserves high temporal resolution in informative segments. We evaluate the proposed method using MLLMs on videos of disassembly tasks recorded at an actual work site. Experimental results show that the proposed method improved the F1 score compared with both the uncompressed baseline and uniform temporal sampling, while reducing average runtime by 88%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_25"
    },
    {
      "id": "TuPo1S.26",
      "paperId": "295",
      "title": "Interpretable Data-Driven Optimization of Resistance Spot Welding Processes Using Bayesian Optimization and SHAP",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "502037",
          "name": "An, Jeong Hyeon",
          "affiliation": "Korea Institute of Industrial Technology (KITECH)"
        },
        {
          "id": "211875",
          "name": "Ju, Chanyoung",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Process Control Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "In Resistance Spot Welding processes, various process variables such as current, voltage, press force, and time interact non-linearly, making it difficult to determine optimal process conditions. Consequently, industrial sites rely heavily on the expertise of skilled workers and face challenges in automating the process. To address this issue, this study proposes a synthetic data-based framework. The proposed framework generates synthetic data that reflects non-linear process responses, interactions between variables, noise, and physical characteristics. It then sequentially per- forms a comparison of 10 regression models, Bayesian optimization-based hyperparameter tuning, SHAP-based variable importance analysis, and the identification of promising regions. Experimental results showed that the optimal model demonstrated excellent predictive performance with an R² value of approximately 0.97, enabling a quantitative explana- tion of the impact of welding variables on quality prediction. These results demonstrate the proof-of-concept feasibility of the proposed framework under synthetic-data conditions. In the future, we plan to verify its industrial applicability by applying it to actual production line data to perform multi-objective optimization that optimizes quality, productivity, and energy efficiency.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_26"
    },
    {
      "id": "TuPo1S.27",
      "paperId": "308",
      "title": "Beer-Lambert Guided Representation Learning for Unsupervised Anomaly Detection in Sub-THz Food Inspection Images",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526999",
          "name": "Hwang, Gyutae",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "281952",
          "name": "Lee, Sang Jun",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "Food manufacturing requires reliable inspection systems to detect foreign material contamination and maintain product safety. Sub-THz transmission imaging provides material-dependent attenuation characteristics that are useful for detecting low-density contaminants in food products. However, existing unsupervised anomaly detection methods mainly rely on RGB-pretrained visual representations, which may not adequately capture the transmission behavior of Sub-THz images. This paper proposes a Beer-Lambert guided representation learning framework for unsupervised anomaly detection in Sub-THz food inspection images. The proposed method introduces an attenuation decomposition module as an auxiliary regularization module that constrains student representations through attenuation reconstruction during training. In addition to the conventional one-class setting, we introduce a Leave-One-Food-Out protocol to evaluate generalization capability under unseen food categories. Experimental results on the Inline-Food-Inspection-THz dataset show that the proposed method improves overall anomaly detection performance over the baseline method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_27"
    },
    {
      "id": "TuPo1S.28",
      "paperId": "315",
      "title": "Diffusion-Based Speech-Driven Gesture Generation System for EveR-6 Social Robot",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527326",
          "name": "Seo, BoHyeong",
          "affiliation": "KITECH"
        },
        {
          "id": "243391",
          "name": "Choi, Dongwoon",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "155753",
          "name": "Lee, Duk Yeon",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "141159",
          "name": "Lee, Dong-Wook",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Human-Robot Interaction",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a speech-driven beat gesture generation system for the EveR-6 social robot, which has an 18 degrees-of-freedom (DOF) upper-body. Generating natural co-speech gestures is a key challenge in social robotics: gestures must be temporally synchronized with speech prosody while reflecting semantic content. We propose a Transformer-based architecture that takes prosodic features (fundamental frequency and root-mean-square energy) along with beat onset labels as inputs, and conditions gesture generation on window-level text embeddings via Feature-wise Linear Modulation (FiLM). Unlike sentence-level conditioning, the proposed window-level scheme assigns a distinct text embedding to each 4-second generation window based on the words spoken in that interval, reducing intra-batch embed- ding cosine similarity from ∼1.0 to 0.30. The model is trained on the BEAT2 dataset with joint angles mapped to the EveR-6 kinematic structure via SMPL-X body pose conversion. Experimental results demonstrate a Beat Consistency Score (BCS) of 0.707 and a mean absolute joint error (MAE) of 12.9 degrees, representing a 66.5% reduction in MAE compared to a prosody-only baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_28"
    },
    {
      "id": "TuPo1S.29",
      "paperId": "323",
      "title": "VaDA-Grounded VLM Reasoning for USV Free-Space Navigation",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527490",
          "name": "Kim, Yongjin",
          "affiliation": "Seadronix"
        },
        {
          "id": "150694",
          "name": "Kim, Hanguen",
          "affiliation": "Seadronix Corp"
        },
        {
          "id": "232046",
          "name": "Jang, Hyesu",
          "affiliation": "Seadronix"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Navigation, Guidance and Control",
        "Robot Vision"
      ],
      "abstract": "Unmanned Surface Vehicles (USVs) require pixel-level perception of navigable water, together with reasoning about contextual hazards such as nearby vessels, port infrastructure, and adverse weather. Recent vision-language models (VLMs) can supply this reasoning, but hallucination and inference latency rule them out as the direct controller in safety-critical maritime operations. We therefore propose a grounded reasoning framework in which Vertical and Detail Attention (VaDA), a maritime segmentation model, runs in a real-time main loop alongside an asynchronously invoked frozen VLM advisor. The VaDA masks ground the VLM, and a mask-based consistency check verifies each VLM proposal against this evidence before execution; rejected proposals fall back to a classical reactive controller. We evaluate the framework on four open-weight VLMs spanning two architecture generations: LLaVA-1.5-7B (2023) and the more recent InternVL3-1B, Qwen2.5-VL-3B, and Qwen3-VL-2B (all 2025). Our five-decision navigation protocol extends OASIs (Ocean AI Segmentation Initiatives) and is annotated by three independent annotators. On OASIs, grounding consistently improves both direction and mean decision accuracy across the three modern VLMs (2025), and the consistency check raises final decision accuracy further. A case study on LLaVA-1.5-7B (the oldest of the four) reveals an asymmetric response, suggesting that the benefit of grounding depends on VLM generation rather than parameter count. Among nine mask providers, VaDA achieves the best deployability–accuracy trade-off on our real-time reference platform.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_29"
    },
    {
      "id": "TuPo1S.30",
      "paperId": "332",
      "title": "Learning Framework for Autonomous Trajectory Generation of Surface Vessels",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "523894",
          "name": "Yun, YoungJun",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "456991",
          "name": "Bang, Hyuntae",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "293856",
          "name": "Youn, Wonkeun",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Unmanned Surface Vessels (USVs) require trajectory generation that keeps a safe distance from surrounding traffic while remaining robust and efficient, yet conventional model-based planners generalize poorly and single-paradigm learning methods suffer from covariate shift or lowsample efficiency. This paper proposes iTransformer-GRPO, a two-stage learning framework for USV trajectory generation that combines imitation learning with deep reinforcement learning. An iTransformer backbone captures the long-term temporal dependencies of multivariate navigational states and outputs a three-dimensional action consisting of one immediate waypoint displacement and a normalized curvature, so that the learning signal is aligned with the curvature-based steering used at deployment. Stage 1 distills demonstration trajectories into the policy by behavioral cloning, and Stage 2 refines it in closed loop with value-function-free Group Relative Policy Optimization (GRPO), in which the policy is re-applied to the state its own previous action produced and a group is a set of such trajectories sampled from one navigational state, so that the advantage follows from group standardization alone. The safety term of the reward is built on a Fujii-type ship-domain geometry, which keeps the safety requirement well defined for an arbitrary number of targets, while the encounter classification of Rules 13–15 and 17 of the International Regulations for Preventing Collisions at Sea (COLREGs) is used to label encounter types. The scope of this paper is the formulation and design of the framework; a quantitative closed-loop evaluation of the trained policies is left to a dedicated study.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_30"
    },
    {
      "id": "TuPo1S.31",
      "paperId": "336",
      "title": "An Agentic Pipeline for Long-Term Video Prediction Data Construction",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527670",
          "name": "Kim, Hyeongjin",
          "affiliation": "Korea Electronics Technology Institute (KETI)"
        },
        {
          "id": "296944",
          "name": "Park, Han-Mu",
          "affiliation": "KETI"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Long-term prediction data in videos is inherently expensive to construct, as it requires high-level temporal reasoning over causal relationships, scene transitions and complex event dynamics. Existing data construction approaches primarily rely on manual annotation or automatic generation using a single Vision-Language Model (VLM), often resulting in semantic hallucinations, temporal inconsistencies and redundant samples. Furthermore, collecting and refining large-scale datasets under user-specified conditions remains a significant challenge. In this paper, we propose an agentic data construction pipeline for automatically building high-quality long-term prediction datasets tailored to user-defined collection environments. The proposed framework adopts a collaborative multi-agent architecture in which multiple Vision-Language Model agents jointly perform video retrieval, semantic filtering, temporal event extraction, data verification and prediction target generation. The proposed system employs cross-agent verification and temporal consistency filtering to reduce errors commonly produced by single-VLM-based automatic generation pipelines while improving semantic consistency and redundancy reduction. Experimental results demonstrate that the proposed multi-agent data construction framework consistently outperforms single-VLM-based pipelines across multiple dataset quality metrics, including annotation accuracy, redundancy reduction, temporal consistency and overall data quality.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_31"
    },
    {
      "id": "TuPo1S.32",
      "paperId": "337",
      "title": "Text-Guided Online Reactive Motion Generation for Two-Character Boxing Interactions",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461503",
          "name": "Jeong, Hea In",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "104763",
          "name": "Kim, Jungho",
          "affiliation": "Korea Electronics Tech. Inst"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Generating interactive motions for two characters remains a challenge due to the spatial and temporal coupling between the participants. Recent models can generate natural responses to an opponent’s movement, but they lack a way for users to control what specific action the character should perform. Meanwhile, existing models that support text control are limited to offline generation and cannot operate in real-time. To solve this problem, we propose a text-guided online reactive motion generation system for two-character boxing. Our model integrates text conditioning into R2R by replacing its standard transformer blocks with Adaptive Layer Normalization (AdaLN) modulated MARTransBlocks. By using classifier-free guidance during inference, our system provides clear direction to the model while maintaining real-time streaming at 91.5 ms per step. When tested on the DuoBox dataset, our model outperforms the previous baseline on all FID metrics and achieves an Action Accuracy of 86.1%, demonstrating reliable text adherence with realistic motion dynamics.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_32"
    },
    {
      "id": "TuPo1S.33",
      "paperId": "338",
      "title": "Real-Time Weld Endpoint Detection for Welding Robots in Shipyard Using the Chi-Square Statistic",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527087",
          "name": "Jung, Seunghwan",
          "affiliation": "Samsung Heavy Industries Co. Ltd.,"
        },
        {
          "id": "527533",
          "name": "Han, Jinbeom",
          "affiliation": "Career Tech"
        },
        {
          "id": "397635",
          "name": "Jeong, Juwon",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "408530",
          "name": "Jeon, Dohyung",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "408272",
          "name": "Choi, Doojin",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "362046",
          "name": "Kim, Hyungjin",
          "affiliation": "Samsung Heavy Industries"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing",
        "Industrial Applications of Control"
      ],
      "abstract": "The shipbuilding industry, which is highly labor-intensive, is facing a decline in competitiveness due to a shortage of skilled welders and a decreasing workforce. To address this issue, welding robots have been deployed in shipyards. However, harsh working environments still restrict their productivity. In particular, welding robots require a touch-sensing process, in which the robot physically contacts the start and endpoints of the weld. As welding robots typically process hundreds of weld lines per day, touch-sensing becomes a major factor reducing productivity. To overcome this limitation, we proposes an automatic endpoint detection method based on the Chi-square statistic, which learns current data measured in real time during welding. Experimental results obtained from actual welding tests demonstrate that the proposed method can detect the endpoint within 3 mm. These results indicate that the proposed method has the potential to replace the conventional touch-sensing process and significantly improve productivity in welding processes.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_33"
    },
    {
      "id": "TuPo1S.34",
      "paperId": "350",
      "title": "Black-Box Membership Inference Risk in Fine-Tuned Diffusion Models Via Conditional Reconstruction Gap",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527699",
          "name": "Kim, Junho",
          "affiliation": "Korea Electronics Technology Institute (KETI)"
        },
        {
          "id": "104763",
          "name": "Kim, Jungho",
          "affiliation": "Korea Electronics Tech. Inst"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Multimedia Systems",
        "Information and Networking"
      ],
      "abstract": "Fine-tuning text-to-image diffusion models on small custom datasets enables personalization but amplifies training-data privacy risks, as fine-tuned models preserve their training images more strongly than unseen ones. We study this risk through membership inference, which determines whether a target image was used during fine-tuning. Existing diffusion-model attacks largely depend on model-internal signals such as losses, predicted noises, and intermediate denoising states, which are unavailable in deployed image-to-image services. We therefore propose a black-box attack based on the Conditional Reconstruction Gap (CRG) that uses only final image-to-image outputs. CRG contrasts reconstruction fidelity under the ground-truth caption against an empty caption, based on the observation that the matching caption preserves a member image markedly better and thus yields a measurable gap. On a fine-tuned Stable Diffusion model, this conditional signal outperforms both gray-box and black-box baselines in the evaluated setting.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_34"
    },
    {
      "id": "TuPo1S.35",
      "paperId": "357",
      "title": "Faster Inference Is Not Always Better: Inference-Time Sensitivity of RL Policies Trained with On-MCU Inference",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527794",
          "name": "Ryu, Geonhee",
          "affiliation": "Gyeongsang National University"
        },
        {
          "id": "527787",
          "name": "Jin, Hokyeong",
          "affiliation": "Gyeongsang National University"
        },
        {
          "id": "105690",
          "name": "Park, Young Jin",
          "affiliation": "Gyeongsang National University(GNU)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Sim-to-real research on reinforcement learning (RL) has focused on matching dynamics parameters, while the execution time of policy inference has received little attention as a source of performance degradation. We experimentally show that an RL policy trained on physical hardware with on-MCU inference becomes implicitly calibrated to the training-time inference execution time τ. A Discrete SAC stepper-motor policy trained at τ ≈ 266 μs (forloop-based LibTorch) degrades in chirp-trajectory (0.1–1.0 Hz, ±π/2 rad, 30 s) tracking MAE by 24.5×, 31.1×, and 183.8× when deployed without retraining at τ ≈ 185 μs (CMSIS-DSP), 161 μs (Eigen), and 473 μs (sequential), respectively. A parallel inference comparison confirms that all implementations produce identical actions from identical states, and padding the Eigen path with a 105 μs delay restores MAE to 0.187°, 100% of baseline, isolating inference execution time as the sole cause. These results indicate that faster inference does not necessarily improve real-time control performance; this effect is difficult to capture in simulation and warrants explicit attention when deploying RL policies on embedded hardware.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_35"
    },
    {
      "id": "TuPo1S.36",
      "paperId": "390",
      "title": "A Study on Edge AI Models for Real-Time and Precise Tracking of OIS Actuator Motion",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "521634",
          "name": "Lee, Homin",
          "affiliation": "UST(University of Science & Technology)"
        },
        {
          "id": "521635",
          "name": "Koo, A Yeong",
          "affiliation": "UST"
        },
        {
          "id": "407729",
          "name": "Yun, Dongho",
          "affiliation": "Korea National University of Science and Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "This study proposes OISNet, a model optimized for low-power edge platforms for optical image stabilization (OIS) marker-tracking inspection. OISNet combines CoordConv-based spatial-information injection, limited spatial downsampling, a lightweight residual block, channel compression, and a compact fully connected coordinate-regression head, with Wing Loss for small-error optimization. A synthetic-data generator provides precisely known ground-truth coordinates without manual labeling error while incorporating Gaussian noise, motion blur, and metallic-reflectivity distortions. The dataset contains 10,000 training, 2,000 validation, and 1,000 test images. TensorRT-accelerated inference was evaluated on an NVIDIA Jetson AGX Orin operated in its lowest-power 15 W mode. OISNet achieved a mean L2 error of 0.00465, latency of 1.85 ms, jitter of 0.398 ms, and throughput of 540.1 FPS, demonstrating a practical precision-latency balance for embedded OIS inspection.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_36"
    },
    {
      "id": "TuPo1S.37",
      "paperId": "411",
      "title": "Gated Physics-Informed Transformers for Mechanical Systems with Changing Uncertain Interactions",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528197",
          "name": "Jabbari, Yeganeh",
          "affiliation": "Ghent University"
        },
        {
          "id": "280814",
          "name": "Coene, Annelies",
          "affiliation": "Ghent University"
        },
        {
          "id": "208200",
          "name": "Crevecoeur, Guillaume",
          "affiliation": "Ghent University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Control Theory and Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "Combining physics-based and data-driven models has shown promise for capturing the behaviour of complex real-world mechanical systems, but the designer must decide how strongly the data-driven component is constrained by the assumed physics, and the appropriate strength depends on the data. We propose a controlled family of four architectures that share the same learned component and differ only in constraint strength --- from an unconstrained Transformer to a strictly constrained Physics-Informed Transformer (PIT), the fourth being a Gated-PIT whose learned, state-conditioned gate decides how much to trust the learned component. We evaluate them on a slider-crank mechanism whose contact force is uncertain and exhibits time-varying dynamics, using synthetic datasets with injected memory effects of increasing duration as well as measurements from an experimental test rig. We find that the preferred architecture depends strongly on the degree of regime mismatch and the strength of the memory effects, and that the identified physical parameters, though highly repeatable, are systematically biased whenever memory is present --- revealing a trade-off between prediction accuracy and parameter identification. We show that the learned gate improves this trade-off, and that reformulating the training cost to score the equation of motion directly reduces the parameter bias substantially at almost no accuracy cost. Finally, we demonstrate that synthetic-to-real pretraining benefits the unconstrained model most. Together, these results give practical guidance on choosing the architecture, constraint strength, and training cost of physics-informed sequence models.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_37"
    },
    {
      "id": "TuPo1S.38",
      "paperId": "413",
      "title": "Implementation of Wireless Reference Compensation Technique Neural Network Controller for a 2 Axis Gimbal System",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528210",
          "name": "Lee, Seung Keon",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "463379",
          "name": "Song, SeHwan",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "463269",
          "name": "Lim, Daehee",
          "affiliation": "Lig Nex1"
        },
        {
          "id": "463287",
          "name": "Seong, Ki jun",
          "affiliation": "LIG Nex1"
        },
        {
          "id": "100310",
          "name": "Jung, Seul",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Control Theory and Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents the implementation of a wireless neural network controller based on a reference compensation scheme, known as the Reference Compensation Technique (RCT), which is a real-time neural network control method. A dedicated neural network controller is developed and employed to compensate for uncertainties in gimbal systems, thereby improving angle-tracking performance. Experimental studies are conducted to demonstrate the feasibility and effectiveness of the RCT-based neural network controller for online control of nonlinear systems.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_38"
    },
    {
      "id": "TuPo1S.39",
      "paperId": "448",
      "title": "A Self-Recovering Behavior Tree for Reliable Multi-Object Pick-And-Place",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528298",
          "name": "Toga, Melese Medhin",
          "affiliation": "WIM Inc"
        },
        {
          "id": "528326",
          "name": "Fawole, Emmanuel Ademola Ayobami",
          "affiliation": "WIM Inc"
        },
        {
          "id": "528291",
          "name": "Martin, Antoinette Deborah",
          "affiliation": "WIM Inc., Daegu, South Korea"
        },
        {
          "id": "430394",
          "name": "Nguyen, Trong Hieu",
          "affiliation": "VinMotion"
        },
        {
          "id": "524811",
          "name": "Kim, Hwarang",
          "affiliation": "WIM Inc"
        },
        {
          "id": "465629",
          "name": "You, Sesun",
          "affiliation": "Incheon National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Robot Vision"
      ],
      "abstract": "Task-level pick-and-place controllers are typically forward scripts; a fixed sequence of perceive, grasp, transport, and place that halts on the first deviation. In multi-object operation deviations are routine: empty grasps, mid- transport slips, and stale planner attachment state. We reformulate the controller around a continuously checked object-secured invariant, realized as a behavior tree whose memoryless root re-derives the invariant on every tick (10 Hz) and re-enters the pick phase whenever it fails; the pick branch is memory-enabled so committed picks run atomically. Recovery is therefore not a scripted handler but a structural property of the tree. Two complementary proprioceptive checks, a stall-at-close flag and a transport position-jump, both route to a single re-pick branch, tolerating either check’s failure mode. We validate on an Indy7 V2 + RG6 cell in NVIDIA Isaac Sim and on hardware, with RT-DETR to FoundationPose perception and cuMotion planning. The controller recovers from all injected empty grasps, recovers from injected slips when the displaced object remains perceivable, adds ≈ 8% throughput overhead on the failure-free path relative to the stock NVIDIA BT, and places 72/84 objects across 12 physical whole-scene runs with no slip and no bad pick.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_39"
    },
    {
      "id": "TuPo1S.40",
      "paperId": "459",
      "title": "Offline Representation Analysis of Batch Size Effects in ACT-Based Manipulation Policies",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "407915",
          "name": "Jeong, Chanyeong",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "518389",
          "name": "Yang, Subin",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "407917",
          "name": "Hwang, Myeonghwan",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "407902",
          "name": "Kim, Eugene",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Robot Mechanism and Control"
      ],
      "abstract": "Action Chunking with Transformers (ACT) enables robots to acquire structured motion policies for contact-rich manipulation from limited demonstrations without large-scale pre-training. A prior efficiency-oriented study found that, on a structured surface-cleaning task, a small batch size (8) matched or exceeded the task completion of a larger batch size (32) while requiring less GPU memory and wall-clock training time. We examine whether the smaller-batch policy carries internal representational deficits that would undermine this efficiency advantage. Through offline analysis of frozen checkpoints, each replayed on its own recorded deployment episode, applying Principal Component Analysis (PCA) to encoder outputs and inspecting encoder and decoder attention patterns, we find that the larger-batch checkpoint exhibits higher effective representation dimensionality and distinct attention structure, although the attention measures do not vary monotonically with batch size. Yet the dimensionality ordering is not reflected in the prior study's deployment results, where the larger-batch policy recorded the lowest task completion. We treat this as an observed mismatch between internal representation metrics and single-trial deployment outcomes, rather than as evidence of a general batch-size-dependent performance effect. The lower-dimensional representations of the smaller-batch policy, though inferior by these internal measures, carry no deployment penalty in the case examined. We therefore caution that internal learning-quality metrics are not reliable proxies for deployment readiness in this regime, and present the result as a representation-level characterization and offline analysis method rather than a causal account, discussing competing explanations for the gap.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_40"
    },
    {
      "id": "TuPo1S.41",
      "paperId": "460",
      "title": "Identification of Road Surface Conditions by Embedded Vehicle Sensors Using Neural Network Models",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528381",
          "name": "Yun, Tae Jin",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "362795",
          "name": "Kim, Jeoing Ku",
          "affiliation": "Hyuyndai MOBIS"
        },
        {
          "id": "528384",
          "name": "Yim, Sun B.",
          "affiliation": "Hyundai MOBIS"
        },
        {
          "id": "100310",
          "name": "Jung, Seul",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents identification of road surface conditions by neural network models. Driving experiments were conducted to collect data from various road surface conditions, and input signals to neural networks were reconstructed to effectively represent vehicle dynamics. Convolutional Neural Networks (CNN), Long Short-Term Memory (LSTM) networks, and hybrid CNN–LSTM architectures were evaluated. The trained models were implemented on an actual vehicle to validate their feasibility in real-time driving environments. The GUI has been designed to monitor the road surface conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_41"
    },
    {
      "id": "TuPo1S.42",
      "paperId": "464",
      "title": "Physics-Informed Safety Shielding for Reinforcement Learning-Based Fast Charging of Lithium-Ion Batteries",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528003",
          "name": "Yun, Ji Young",
          "affiliation": "Seoul National University"
        },
        {
          "id": "528002",
          "name": "Oh, Hyejung",
          "affiliation": "Seoul National University, Department of Chemical and Biological Engineering"
        },
        {
          "id": "527984",
          "name": "Lee, Hyungsoo",
          "affiliation": "Seoul National University"
        },
        {
          "id": "528256",
          "name": "Kang, TaeKyu",
          "affiliation": "Hyundai Motor Company"
        },
        {
          "id": "528301",
          "name": "Kim, Woo Sung",
          "affiliation": "HYUNDAI Motor Company"
        },
        {
          "id": "405162",
          "name": "Lee, Jong Min",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Process Control Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Fast charging of lithium-ion batteries requires charging-current decisions that reduce charging time while satisfying prescribed constraints on terminal voltage and cell temperature. Reinforcement learning (RL)-based charging policies can adaptively determine the current from the battery state. However, during exploration, the actor may propose currents that would violate the voltage or temperature limits. To address this issue, this paper introduces a physics-informed action shielding method for SAC-based fast charging. A safety threshold model is first pretrained using PyBaMM-based electrochemical-thermal simulations to estimate a state-dependent current threshold. When the SAC actor generates a current above this threshold, the shield corrects it before execution. For shielded actions, a one-step counterfactual simulation assesses whether the raw current would violate the prescribed margin limits. The resulting label is then used for online threshold adaptation. Actor safety regularization is also introduced to discourage repeated over-threshold actions. Simulation results show that the shielding framework reduces hard-limit violations compared with no-shield SAC. It also achieves a lower shield activation rate and a higher average return than naive-shield SAC. These results suggest that physics-informed action shielding can improve the balance between constraint satisfaction and charging progress under the evaluated simulation conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_42"
    },
    {
      "id": "TuPo1S.43",
      "paperId": "475",
      "title": "Development of an Explainable Artificial Intelligence-Based Speech Disorder Diagnostic System through Speech Data Collection and Analysis in Individuals with and without Speech Disorders",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527585",
          "name": "Kang, Seungrok",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527637",
          "name": "Shin, Sun Hye",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527638",
          "name": "Jeong, Da Woon",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527641",
          "name": "Lee, Sarang",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527633",
          "name": "Yun, Jieon",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527636",
          "name": "Jeon, GaHye",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527634",
          "name": "Jang, Ji Seok",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527642",
          "name": "Kim, Ra Youn",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527640",
          "name": "Sung, Minji",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527639",
          "name": "Jo, Yunju",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "528331",
          "name": "Kim, Gi-Wook",
          "affiliation": "Jeonbuk. National University Hospital"
        },
        {
          "id": "528235",
          "name": "Ko, Myoung-Hwan",
          "affiliation": "Jeonbuk National University Medical School and Hospital"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Biomedical Instruments and Systems",
        "Information and Networking"
      ],
      "abstract": "Speech-language assessments play a critical role in the diagnosis, prognosis, and treatment planning of individuals with speech disorders. However, conventional assessment methods often rely on manual analysis and subjective judgments, which may limit efficiency and consistency. This study aimed to develop an explainable artificial intelligence (XAI)-based speech disorder diagnostic program capable of automating speech-language assessments and providing rapid diagnostic feedback. A total of 1,000 speech recordings were retrospectively collected from publicly available AI-Hub datasets, including Voice Data for Diagnosis of Parkinson’s Disease and Related Disorders and Speech Command Data from Individuals with Dysarthria. Acoustic features such as jitter, shimmer, harmonics-to-noise ratio (HNR), formants, fundamental frequency (F0), Mel-frequency cepstral coefficients (MFCCs), alternating motion rate (AMR), pitch standard deviation, and nasalance were extracted. The collected speech signals underwent preprocessing procedures including noise reduction, speech alignment, volume normalization, and sampling-rate standardization. The extracted features were analyzed using an XAI-based diagnostic module designed to classify speech disorders, predict severity levels, and identify error types. Diagnostic outputs were summarized through interpretable reports presenting abnormal acoustic indicators, recommended speech training tasks, and graphical comparisons of speech performance. The proposed framework supports objective assessment and individualized rehabilitation planning while enabling continuous model improvement through user feedback and retraining mechanisms. Currently, the XAI-based speech disorder diagnostic and rehabilitation program is under development and validation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_43"
    },
    {
      "id": "TuPo1S.44",
      "paperId": "487",
      "title": "Sensorless Speed Estimation of Permanent Magnet Synchronous Motors Using Koopman-Invariant Hankel Matrix",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528227",
          "name": "Cho, Yeonsik",
          "affiliation": "Hanyang University"
        },
        {
          "id": "349323",
          "name": "Lee, Youngwoo",
          "affiliation": "Hanyang University ERICA"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents a fully data-driven sensorless control scheme for Permanent Magnet Synchronous Motors (PMSMs) utilizing a Koopman Linear State Observer based on time-delay coordinate embedding. Conventional sensorless control methods rely on complex nonlinear observers that require precise mathematical system models and heavy computational resources. To overcome these limitations, the proposed method lifts measurable nonlinear electrical states (voltages and currents) into a finite-dimensional Koopman-invariant linear subspace via Singular Value Decomposition (SVD). Subsequently, a linear regression model is applied to the projected states to directly estimate the unmeasured mechanical rotor speed. The primary contribution of this work lies in integrating the spatial projection and linear estimation processes into a single static gain matrix. This proposed architecture bypasses the need to solve differential equations online, thereby significantly reducing the computational burden and facilitating real-time execution on standard microcontrollers. Simulation results demonstrate that the proposed data-driven observer successfully achieves highly accurate speed estimation while maintaining significant computational efficiency and robustness against system nonlinearities.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_44"
    },
    {
      "id": "TuPo1S.45",
      "paperId": "488",
      "title": "Hybrid Control Strategy for PMSM Drives Using Koopman Operator-Based Residual Compensation",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528251",
          "name": "Jeong, Seowoo",
          "affiliation": "HANYANG UNIVERSITY"
        },
        {
          "id": "349323",
          "name": "Lee, Youngwoo",
          "affiliation": "Hanyang University ERICA"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Permanent magnet synchronous motors (PMSMs) are widely used in electric vehicles, robotics, and other high-performance drive applications. However, parameter uncertainties, unmodeled nonlinearities, and operating-condition-dependent variations cause discrepancies between the baseline model and the actual PMSM plant, thereby degrading current tracking performance. To address this problem, this paper proposes a hybrid PMSM control method based on Koopman operator-based residual compensation. The key idea is to define the mismatch between the baseline model and the actual plant as residual dynamics, approximate them linearly in a Koopman lifting space, and convert them into a compensation voltage input. By preserving the model-based control framework, the proposed method maintains the stability-oriented structure and physical interpretability of conventional model-based control, while mitigating performance degradation caused by model mismatch arising from parameter uncertainties and unmodeled nonlinear effects through data-driven residual compensation. MATLAB/Simulink-based simulation results demonstrate that the proposed compensator enables the actual PMSM plant to accurately track the corresponding baseline-model currents in both the d-and q-axes under model mismatch, thereby validating the effectiveness of the proposed control strategy.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_45"
    },
    {
      "id": "TuPo1S.46",
      "paperId": "510",
      "title": "Resource-Efficient Depth-Conditioned Reference Generation for Humanoid Obstacle Avoidance",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528576",
          "name": "Sung, Yunseok",
          "affiliation": "Kookmin Univ"
        },
        {
          "id": "109773",
          "name": "Cho, Baek-Kyu",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a resource-efficient modular framework for humanoid obstacle avoidance. Recent humanoid parkour and character-control systems show that depth-conditioned RL, motion matching, and learned motion priors can produce highly dynamic skills, but these pipelines often train perception and whole-body control together or require large motion-generation infrastructure. We instead learn a narrow vision-to-reference interface: depth and proprioceptive state are converted into the full reference goal that an existing locomotion policy can already track. A motion-reference variational autoencoder compresses future motion windows into a latent variable and reconstructs the next-cycle policy reference. A depth-state encoder is then distilled to predict the same latent using only causal observations. At deployment, the encoder and decoder generate reference goals at every control step, while the robust student policy performs whole-body tracking. This separation reuses a high-quality locomotion controller, reduces vision-training cost, and avoids direct mapping from depth to torque-level actions. Closed-loop evaluations on the humanoid model in MJX over over 900 episodes show depth-conditioned yaw responses and obstacle-avoidance behavior, while revealing remaining limitations in collision-free clearance under randomized obstacle geometry.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_46"
    },
    {
      "id": "TuPo1S.47",
      "paperId": "584",
      "title": "Part-Aware Algorithm Fusion for Whole-Body 3D Pose Estimation",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528767",
          "name": "Lee, Sangwon",
          "affiliation": "Korea Electronics Technology Institute (KETI)"
        },
        {
          "id": "296944",
          "name": "Park, Han-Mu",
          "affiliation": "KETI"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "Selecting a practical 3D whole-body pose estimator is difficult because body, hand, and face regions show different trade-offs in accuracy, temporal stability, part coverage, and inference speed. This paper evaluates representative whole-body, body, hand, and face estimators on RGB human-motion videos with part-wise 3D ground truth. We first analyze each anatomical part separately using PA-MPJPE, temporal errors, and FPS. We then evaluate controlled fusion settings that combine selected body, hand, and face sources to compare accuracy-focused, balanced, and speed-focused whole-body pose estimation pipelines. Under the evaluated PA-MPJPE protocol, SAM 3D Body provides the strongest body and hand accuracy, while PEAR provides the best face accuracy and the fastest unified extraction setting. Fusion experiments further show that part-wise combinations can improve accuracy, whereas a single unified model is preferable when processing speed is the primary constraint.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_47"
    },
    {
      "id": "TuPo1S.48",
      "paperId": "589",
      "title": "Runtime-Aware ACT Deployment for Low-Cost Bimanual Robots: Dataset Curation and Temporal Ensemble Diagnostics",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527475",
          "name": "Seo, Myeongwon",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "193164",
          "name": "Joe, Hyun-Min",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Action Chunking Transformer (ACT) has shown potential for low-cost bimanual manipulation, but real-world deployment is affected by dataset quality, command timing, temporal ensembling, and motor velocity/acceleration limits. This study presents a practical deployment procedure for applying ACT to a Dynamixel-based bimanual leader-follower robot in an automotive part grasp-handover-placement task. Approximately 900 demonstrations were collected and about 400 episodes were curated for training. A baseline evaluation with object and holder pose variations recorded 39/56 task completions (69.6%). Approximately 90 inference logs were then used as diagnostic examples to compare command publish rate and motor limit settings. The analysis focuses on temporal ensemble source chunks, weights, source time span, weighted RMS spread, and robot-command tracking error. The observations indicate that different runtime conditions reflected in the logged metadata can be associated with different command-level behavior, even when the policy checkpoint is unchanged. Therefore, this study emphasizes recording and managing dataset curation, measured execution frequency, temporal ensemble metadata, and motor limit settings when deploying ACT-based policies on low-cost robots.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_48"
    },
    {
      "id": "TuPo1S.49",
      "paperId": "598",
      "title": "A Study on the Validity of Consonant Accuracy Evaluation Using an AI Articulation Evaluation Program: Case Study",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528235",
          "name": "Ko, Myoung-Hwan",
          "affiliation": "Jeonbuk National University Medical School and Hospital"
        },
        {
          "id": "528331",
          "name": "Kim, Gi-Wook",
          "affiliation": "Jeonbuk. National University Hospital"
        },
        {
          "id": "527639",
          "name": "Jo, Yunju",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527638",
          "name": "Jeong, Da Woon",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527634",
          "name": "Jang, Ji Seok",
          "affiliation": "Jeonbuk National University Hospital"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "This study was conducted to verify the validity of a new AI articulation evaluation program based on U-TAP by comparing the children's PCC (Percentage of Consonants Correct), assessed using the program, with the auditory perceptual evaluations of speech therapists. During the first visit (Visit 1), the subjects underwent the U-TAP assessment using an AI articulation assessment program inside a soundproof booth where external noise was blocked. The test voice was recorded using a separate microphone. Examiner 1 (speech therapist) and Examiner 2 (speech therapist) listened to the subjects' recorded voices, completed the U-TAP assessment result log, and verified the PCC results analyzed using the AI articulation assessment program. During the second visit (Visit 2), which took place within 7 days (±5 days) after Visit 1, the subjects underwent the U-TAP assessment using the AI articulation assessment program inside a soundproof booth where external noise was blocked. The test voice was recorded using a separate microphone during this visit. Examiner 1 (Speech Therapist) and Examiner 2 (Speech Therapist) listened to the recorded speech of the subject, completed the U-TAP evaluation result log, and verified the PCC results analyzed using an AI articulation evaluation program. The results of repeated measurements of word- and sentence-level consonant accuracy on three subjects during Visit 1 and Visit 2 are as follows. The evaluation results of Examiner 1 and Examiner 2 were generally within a similar range, but differences between the examiners were observed depending on the subject. The Revocal evaluation results were close to the examiner's values under some conditions, but generally tended to be lower than those of Examiner 1 and Examiner 2. In particular, the difference between the Revocal and examiner evaluations was greater in sentence-level consonant accuracy than in the word-level. This research was supported by the Ministry of Science and ICT (MSIT), Republic of Korea, through the National IT Industry Promotion Agency (NIPA). (Grant No. PJT-26-040359)",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_49"
    },
    {
      "id": "TuPo1S.50",
      "paperId": "443",
      "title": "Multi-Floor Navigation System for Indoor Autonomous Service Robot",
      "session": "TuPo1S",
      "date": "2026-10-27",
      "start": "17:00",
      "end": "18:00",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528329",
          "name": "Kwon, Do Young",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "463143",
          "name": "Lee, Joon Ho",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "317444",
          "name": "Choi, Woo Young",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Rehabilitation Robot",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper proposes a multi-floor navigation system considering the inter-floor movement of autonomous service robots in an indoor environment. Conventional navigation systems show effective performance in a single-floor environment, but for various services and stable driving, a navigation system considering inter-floor movement in multi-floor environments is required. For this purpose, we estimate the state of the robot based on the Kalman Filter using a dynamic model representing the motion that occurs during inter-floor movement from the Inertial Measurement Unit sensor. The floor decision of the robot is made using the Gaussian Mixture Model-based likelihood, in which the estimated state and covariance obtained from the KF are jointly considered. The floor decision result, including the moved distance and floor information, is integrated with the conventional navigation system, enabling the autonomous service robot to perform stable autonomous navigation across floors in an indoor environment. To validate the proposed multi-floor navigation system, a scenario-based experiment was conducted in an indoor multi-floor environment, where the autonomous service robot moved across four floors. The results confirmed that the robot accurately reached the target destination, demonstrating the feasibility of the proposed system.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_1.html#tupo1s_50"
    },
    {
      "id": "WeAT1.1",
      "paperId": "169",
      "title": "Post-Fault Wrench Feasibility and Command-Preserving Reallocation for a Fully-Actuated Omnicopter (I)",
      "session": "WeAT1",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524630",
          "name": "Lee, Hohyung",
          "affiliation": "Pohang University of Science and Technology (Postech)"
        },
        {
          "id": "139894",
          "name": "Han, Soohee",
          "affiliation": "Pohang University of Science and Technology ( POSTECH )"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Mechanism and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Fully actuated omnicopters offer high maneuverability, but rotor failures can severely distort their flight envelope through coupled force and torque generation. This paper investigates post-fault wrench feasibility and command-preserving actuator reallocation for a tilted-lattice eight-rotor omnicopter, where directional actuator phasing makes the remaining control authority highly dependent on the failed rotor location. Under a single rotor failure, asymmetric forward/reverse thrust limits, hover support, and torque requirements reshape the feasible wrench set. We formulate actuator allocation as a constrained feasibility problem and evaluate the degraded translational envelope under a zero-torque condition, representing a task-oriented mode that preserves attitude or payload direction. The analysis reveals two geometric failure classes: a severe-degradation class whose weakest horizontal translational authority drops to 4.48 N, and a moderate-degradation class retaining 15.66 N. For transit-oriented motion, optimization-based reallocation relaxes the zero-torque constraint within a bounded auxiliary torque margin. The selected auxiliary torque maximizes feasible translation while maintaining the required vertical force for hover. In the most constrained directions, this relaxation expands the limit from 4.48 N to 22.93 N in the severe class and from 15.66 N to 28.70 N in the moderate class, providing a feasibility-level basis for attitude-aware fault-tolerant trajectory planning.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1_01"
    },
    {
      "id": "WeAT1.2",
      "paperId": "203",
      "title": "Output-Feedback Data-Driven Predictive Control under Bounded Data Noise (I)",
      "session": "WeAT1",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "406969",
          "name": "Lee, Hye Jin",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        },
        {
          "id": "200780",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents a data-driven predictive control method for discrete-time linear systems based on input-output measurements. The offline data collection phase considers only input-output trajectories corrupted by bounded noise, while the corresponding noise bound is assumed to be known. A data-consistent set is constructed to represent all system dynamics compatible with the collected noisy data and the prescribed noise bound. An auxiliary input-output representation is introduced to describe the system behavior, and the controller is designed by imposing robust conditions over all admissible system dynamics in the data-consistent set. Sufficient linear matrix inequality conditions are derived to ensure closed-loop stability and to incorporate ellipsoidal input-output constraints within a unified framework. Simulation results demonstrate that the proposed method achieves asymptotic output regulation to a prescribed operating point while satisfying both input and output constraints.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1_02"
    },
    {
      "id": "WeAT1.3",
      "paperId": "306",
      "title": "Chain-Of-Phases: Stable Closed-Loop Generator Selection for Long-Horizon Manipulation (I)",
      "session": "WeAT1",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525793",
          "name": "Park, Hyeryeong",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "139894",
          "name": "Han, Soohee",
          "affiliation": "Pohang University of Science and Technology ( POSTECH )"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "Long-horizon tasks can be decomposed into phase-specific action generators, which can simplify task execution. However, selecting an appropriate action generator under the current state remains important. A fixed temporal schedule, as a general approach, can achieve competitive performance, but it may execute an inappropriate action generator for a long time. To address this issue, we propose Chain-of-Phases, which stabilizes action generator selection using a latent phase-CoT reasoner and a monotonic phase-state update. We evaluate the proposed method in three FrankaKitchen long-horizon manipulation tasks with intermediate-phase initial states. Experimental results on long-horizon manipulation tasks show that our approach reduces wrong generator execution and suppresses unstable switching under the same action generator bank.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1_03"
    },
    {
      "id": "WeAT1.4",
      "paperId": "419",
      "title": "A Combined Step-Size Filtered-X Affine Projection Exponential Hyperbolic Sine Algorithm for Active Noise Control (I)",
      "session": "WeAT1",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "408762",
          "name": "Ryu, Seung Hyun",
          "affiliation": "POSTECH"
        },
        {
          "id": "408771",
          "name": "Park, Jeongmin",
          "affiliation": "POSTECH"
        },
        {
          "id": "536117",
          "name": "Ryu, Jeongmin",
          "affiliation": "POSTECH"
        },
        {
          "id": "536571",
          "name": "Wu, Zhihe",
          "affiliation": "Southeast University"
        },
        {
          "id": "408272",
          "name": "Choi, Doojin",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "200780",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        }
      ],
      "keywords": [
        "Information and Networking",
        "Sensors and Signal Processing"
      ],
      "abstract": "This study introduces a novel active noise control (ANC) approach, termed the combined step-size filtered-x affine projection exponential hyperbolic sine algorithm (CSS-FxAPEHSA). To practically handle secondary path effects, the filtered-x architecture is integrated into the robust affine projection algorithm. Moreover, the combined step-size of the algorithm is derived, which can dynamically adjust the mixing parameter via l1-norm error minimization. This strategy effectively resolves the trade-off between convergence rate and steady-state misalignment, while preserving strong resilience against impulsive interferences. Comprehensive simulations verify that the CSS-FxAPEHSA achieves superior convergence rates and enhanced steady-state accuracy compared to conventional techniques.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1_04"
    },
    {
      "id": "WeAT1.5",
      "paperId": "496",
      "title": "IMS-LIO: IMU Mode-Switching Point-Wise LiDAR-Inertial Odometry Robust to IMU Saturation (I)",
      "session": "WeAT1",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526614",
          "name": "Shin, KyuMin",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "349325",
          "name": "Hong, Junwoo",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        },
        {
          "id": "515699",
          "name": "Jo, Hyunyoung",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "139894",
          "name": "Han, Soohee",
          "affiliation": "Pohang University of Science and Technology ( POSTECH )"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Vision"
      ],
      "abstract": "LiDAR-inertial odometry (LIO) provides accurate state estimation by combining the high-rate motion measurements of an inertial measurement unit (IMU) with the geometric observations of LiDAR. However, conventional LIO methods that use IMU measurements as state-prediction inputs can be severely degraded when the IMU output is saturated, because clipped angular velocity or acceleration directly corrupts the motion prior. Although Point-LIO improves robustness by treating IMU measurements as correction measurements, it does not fully exploit reliable inertial prediction during non-saturated intervals. This paper proposes IMS-LIO, an IMU mode-switching point-wise LIO framework for robust state estimation under IMU saturation. The proposed method switches the role of IMU measurements according to real-time saturation detection. In the nominal mode, IMU measurements are used for state prediction to provide an inertial motion prior. In the saturation mode, angular velocity and acceleration are included in the filter state, and IMU measurements are used for correction while saturated axes are excluded from the update. Experimental evaluations are conducted on the TIGS dataset, which contains aggressive tumbling motions and repeated IMU saturation, to analyze the effectiveness of the proposed mode-switching strategy for robust LiDAR-inertial odometry.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1_05"
    },
    {
      "id": "WeAT1.6",
      "paperId": "551",
      "title": "B-IPM: A GPU Batch Interior-Point QP Solver for Large-Batch Multi-Scenario MPC (I)",
      "session": "WeAT1",
      "date": "2026-10-28",
      "start": "10:15",
      "end": "10:30",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528211",
          "name": "Cha, Minkyu",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "528477",
          "name": "Park, Kyoungyoon",
          "affiliation": "Samsung Electronics"
        },
        {
          "id": "528433",
          "name": "Kim, Useong",
          "affiliation": "Samsung Electronics"
        },
        {
          "id": "405728",
          "name": "Kim, KyungSoo",
          "affiliation": "POSTECH"
        },
        {
          "id": "200780",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Control Theory and Applications"
      ],
      "abstract": "When validating multiple scenarios or generating high-quality data for reinforcement learning, efficiently handling a large number of structurally identical problems is essential. CPU-based solvers can accurately solve quadratic programming (QP) formulations of model predictive control (MPC) problems, but their computational cost grows linearly with the number of instances. This paper presents B-IPM, a throughput-oriented GPU batch primal-dual interior-point QP solver that simultaneously solves up to 10,000 MPC problems formulated as QPs sharing the same cost and constraint structure. B-IPM formulates multiple cart-pole regulation problems with varying initial conditions and constraint bounds as condensed QPs and solves them using a log-barrier primal-dual interior-point method. Experimental results demonstrate that all 100 instances are stably controlled to the upright equilibrium, even when position constraints are active, and zero falls are observed across all tested batch sizes up to 10,000. Furthermore, a batch-size sweep from 1 to 10,000 reveals that the per-step latency of a six-core CPU cyipopt baseline increases almost linearly, whereas B-IPM scales sublinearly, achieving an approximate 3.3-fold speedup at a batch size of 10,000. These results indicate that B-IPM is well-suited for large-scale, multi-scenario MPC verification and for generating large volumes of trajectory data for reinforcement learning.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1_06"
    },
    {
      "id": "WeAT1.7",
      "paperId": "611",
      "title": "Equivalent-Circuit-Model Degradation Signatures of Lithium-Ion Batteries across Aging Conditions from Large-Scale EIS (I)",
      "session": "WeAT1",
      "date": "2026-10-28",
      "start": "10:15",
      "end": "10:30",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "363054",
          "name": "Yoon, Kwanwoong",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        },
        {
          "id": "139894",
          "name": "Han, Soohee",
          "affiliation": "Pohang University of Science and Technology ( POSTECH )"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "Lithium-ion battery degradation proceeds through different electrochemical processes depending on temperature and operating conditions, and the components extracted from electrochemical impedance spectroscopy (EIS) by equivalent-circuit-model (ECM) fitting are widely used as diagnostic indicators. However, such component-based degradation signatures are mostly established on a few cells with laboratory-grade EIS, and how far they remain observable in large-scale, realistic (low-cost cycler) EIS has rarely been verified. In this work, we fit an ECM to the room-temperature EIS of a large public dataset of cells aged under a wide range of conditions, and extract the ohmic resistance (R0), the charge-transfer resistance (R2), and the constant-phase-element parameters Q and p. We track these together with capacity-based state of health (SOH) across aging temperature, charge protocol, and state of charge (SOC). A single-ZARC model reproduces the spectra with low error, and R0 and R2 increase while p decreases consistently across almost all cells as the cells age. The growth rate of R2 per unit capacity loss varies with condition: under high-rate charging at low temperature the capacity loss is decoupled from the R2 increase, which we link to lithium plating with loss of lithium inventory, whereas at high temperature Q and p change in a way corresponding to the surface-area and heterogeneity increase of particle cracking. These trends are broadly consistent with previous reports.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat1_07"
    },
    {
      "id": "WeAT2.1",
      "paperId": "564",
      "title": "Ultrasound-Based Quantitative Evaluation of Calcaneal Motion Around Initial Contact under an Ankle Inversion Condition",
      "session": "WeAT2",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528728",
          "name": "Negishi, Haruna",
          "affiliation": "Meiji University"
        },
        {
          "id": "528729",
          "name": "Yoshiyama, Hideo",
          "affiliation": "Meiji University"
        },
        {
          "id": "454747",
          "name": "Miyamoto, Kazuki",
          "affiliation": "Meiji University"
        },
        {
          "id": "179084",
          "name": "Itami, Taku",
          "affiliation": "Meiji University"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Biomedical Instruments and Systems",
        "Control Devices and Instruments"
      ],
      "abstract": "Ankle inversion is important during walking and turning movements; however, excessive inversion can lead to lateral ankle sprain. Quantitative evaluation of structural changes around the calcaneus during inversion is therefore important, but stable ultrasound imaging during motion remains challenging because probe position and contact conditions can change. In this study, we propose an ultrasound-based method for quantitatively evaluating changes in the calcaneal bone surface and surrounding soft tissues under dynamic inversion conditions. A dedicated fixation holder was developed to stabilize the ultrasound probe, and an image processing workflow was constructed to extract the calcaneal region. Ultrasound images were acquired from five healthy adult participants under neutral and inversion conditions. The x3 coefficient of the cubic curve fitted to the calcaneal surface and the low-intensity pixel ratio in the soft tissue region were used as evaluation indices. For both indices, all participants showed changes in the same direction between conditions, and significant differences were observed using one-tailed paired t-tests. However, the 95% confidence intervals for the effect sizes were wide and included zero. These results suggest that ultrasound derived indices around the calcaneus may exhibit condition dependent changes under the dynamic conditions used in this study.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat2_01"
    },
    {
      "id": "WeAT2.2",
      "paperId": "451",
      "title": "Data-Driven Walking Intention Recognition and Position Estimation for a Smart Walker Using Low-Cost Depth Sensor",
      "session": "WeAT2",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528333",
          "name": "Choi, Joonhyuk",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "528346",
          "name": "Choi, Wonseok",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "111254",
          "name": "Choi, Mun-Taek",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Human-Robot Interaction",
        "Robot Vision"
      ],
      "abstract": "In close-proximity frontal following scenarios for smart walkers, recognizing the user's walking intention and relative position remains challenging due to the cost and complexity of multi-sensor systems and the limited availability of real walking data. To address these challenges, this study proposes a data-driven approach that recognizes the user's walking intention and position primarily using depth information acquired from a low-cost depth sensor and improves data diversity through simulation-based data augmentation. Specifically, the proposed method employs a Transformer-based model for walking intention prediction, an ROI-based depth processing algorithm for user position estimation, and Isaac Sim for simulation data generation. Experimental results show that walking intention recognition using depth information alone achieved an average F1-score of 0.88. The estimated user-walker distance was 0.70 pm 0.049 m (SD), corresponding to a comfortable distance during walking assistance. The results demonstrate that the proposed data-driven method can effectively recognize the user's walking intention and position using depth information, while a 2D PID-based following control simulation verifies the feasibility of applying the proposed method to smart walker control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat2_02"
    },
    {
      "id": "WeAT2.3",
      "paperId": "570",
      "title": "System Integration and Control Architecture of a 3-DOF End-Effector Robot for Upper-Limb Rehabilitation",
      "session": "WeAT2",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "464130",
          "name": "Hyeon, Heui-sub",
          "affiliation": "Sejong University"
        },
        {
          "id": "464129",
          "name": "Woo, Hyunsoo",
          "affiliation": "Sejong University"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Robot Mechanism and Control",
        "Human-Robot Interaction"
      ],
      "abstract": "Upper-limb rehabilitation robots have been widely studied to provide repetitive and task-oriented training for patients with motor impairments. In our previous study, a three-degree-of-freedom (3-DOF) end-effector-type upper-limb rehabilitation robot was developed, and its mechanical design, workspace optimization, and structural validation were presented. This paper extends the previous work by focusing on the overall system integration, control hardware architecture, and control strategies for the developed robot. To clarify the implementation framework, the control hardware configuration and signal flows based on a real-time operating system (RTOS) network are established. Furthermore, a non-switched cascade control architecture is formulated, in which a task-space admittance controller generates a modified reference trajectory for task-space impedance tracking, while a conditional joint-space impedance loop enforces the spatial tilt-angle boundary. The formulated framework serves as an initial structure for future real-time control and interactive rehabilitation experiments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat2_03"
    },
    {
      "id": "WeAT2.4",
      "paperId": "431",
      "title": "Design and Evaluation of Pilates-Bot: A Cable-Driven Rehabilitation Robot for Bed-Ridden Patients",
      "session": "WeAT2",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "482002",
          "name": "Jeong, Seonghun",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "460892",
          "name": "Ahn, Ingyun",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "151511",
          "name": "Kang, Jiyeon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Bed-ridden patients require repeated lower-limb exercise to prevent mobility decline, but access to therapist guided rehabilitation is often limited in bedside environments. This paper presents Pilates-Bot, a cable-driven bedside rehabilitation robot designed to provide guided Pilates-based lower-limb exercise in a supine posture. The system uses a modular mobile frame positioned around a bed, while actuators are separated from the patient and assistive forces are transmitted through lightweight cables to reduce mechanical burden near the user. For real-time control, encoder-based cable length measurements were used to estimate the end effector position with pulley geometry compensation. A virtual spring controller generated position-error-based assistive forces, and quadratic programming allocated the desired force to individual cable tensions under tension constraints. Position tracking experiments with a 4.5 kg load were conducted along 300 mm reciprocating trajectories. The measured trajectories followed the references, with delay-compensated RMS errors of 5.3% and 14.0% of the motion range in the y- and z-axis directions, respectively. A preliminary usability evaluation with five elderly participants showed that Assist-As-Needed(AAN) mode maintained or improved tracking performance while providing higher robot-generated assistance than Minimal-Support mode mode, with a System Usability Scale (SUS) score of 91.67 and low perceived workload. These results support the feasibility of Pilates-Bot as a bedside lower-limb rehabilitation system.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat2_04"
    },
    {
      "id": "WeAT2.5",
      "paperId": "111",
      "title": "Bridging Autonomy and Safety in Medical Robotics through Hardware and Software Architecture Design",
      "session": "WeAT2",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "396313",
          "name": "Schimmelpfennig, Jan",
          "affiliation": "University of Basel"
        },
        {
          "id": "163805",
          "name": "Gerig, Nicolas",
          "affiliation": "BIROMED-Lab, University of Basel"
        },
        {
          "id": "116937",
          "name": "Rauter, Georg",
          "affiliation": "University of Basel"
        },
        {
          "id": "276583",
          "name": "Sommerhalder, Michael",
          "affiliation": "University of Basel"
        }
      ],
      "keywords": [
        "Information and Networking",
        "Biomedical Instruments and Systems",
        "Rehabilitation Robot"
      ],
      "abstract": "Advanced perception and motion-planning libraries for robotics are usually developed for non-real-time operating systems. However, safety-critical medical robotics applications require deterministic, hard real-time execution. We propose an architecture that separates non-real-time deliberative functions, such as planning, perception, and learning, from real-time industrial safety and motion control. A supervised interface validates commands sent from the deliberative layer to the control layer to ensure safety. We present two open-source interfaces that connect ROS 2, which runs on a standard Linux kernel, to a Beckhoff TwinCAT 3 real-time PLC: (i) a UDP-based interface with application-layer security and (ii) a hardware-isolated EtherCAT master–master bridge. Both preserve safety authority within the real-time domain while enabling integration of advanced computer vision and machine learning algorithms. The architecture is demonstrated in a semi-autonomous orthopedic laser application.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat2_05"
    },
    {
      "id": "WeAT3.1",
      "paperId": "87",
      "title": "Conservative Visual-Geometric Fusion for Off-Road Traversability Estimation (I)",
      "session": "WeAT3",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "384838",
          "name": "Jang, Seoyeon",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "350836",
          "name": "Kim, Daebeom",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "390827",
          "name": "Lim, Seonghyeon",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "Estimating traversability in unstructured off-road environments remains challenging, as traversability often cannot be determined from visual appearance or geometric properties alone. However, existing approaches often rely on only one of these cues, limiting their ability to leverage both semantic and geometric information. In this paper, we propose a learning framework that jointly exploits visual and geometric cues for traversability estimation in unstructured off-road environments. To avoid the need for manual annotation, we introduce an automatic label generation framework that produces visual traversability and geometric risk labels using a pretrained visual traversability labeler and geometric terrain analysis. We further propose a visual-geometric fusion strategy that combines visual traversability and geometric risk predictions to achieve more reliable traversability estimation. Experimental results across multiple seasons and diverse off-road terrains demonstrate that the proposed method achieves more balanced traversability estimation than visual-only and geometric-only approaches.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat3_01"
    },
    {
      "id": "WeAT3.2",
      "paperId": "426",
      "title": "Equivalent-LC-Prior 13-State Grid-Following Digital Twin for 220kW BESS-PCS: Identification, Stability, and Replay Validation from SCADA Logs (I)",
      "session": "WeAT3",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527675",
          "name": "Kim, Dongpin",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "527685",
          "name": "Park, Jae-Hyeong",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "527698",
          "name": "Lee, Youngseok",
          "affiliation": "KAIST"
        },
        {
          "id": "527810",
          "name": "You, Wonhyeok",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "527686",
          "name": "Jeon, Yeongho",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "527770",
          "name": "Park, Ki-Bum",
          "affiliation": "KAIST"
        },
        {
          "id": "466324",
          "name": "Kim, Yonghun",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes a 13-state direct–quadrature (dq) grid-following (GFL) digital twin for 220kW battery energy storage power-conversion systems (BESS-PCS) built from low-rate supervisory control and data acquisition (SCADA) logs under unknown grid impedance. Only low-rate SCADA observations are accessible while the converter dynamics are much faster. The equivalent line inductance and shunt capacitance are identified from multiple field logs by a robust iteratively reweighted least-squares (IRLS) estimator, while the inner and outer controller gains stay at commissioned nominal values, so the twin is calibrated rather than fully data-identified. The plant, controller, and disturbance are combined into one nonlinear model, and the available logged operating envelope is numerically checked for local exponential stability, with the angle-augmented closed-loop Jacobian remaining Hurwitz across the observed non-saturated strong-grid envelope. In replay, the twin reproduces active power, reactive power, and current with R2≥0.986 on a representative field test. The reconstructed point-of-common-coupling (PCC) voltage ˆ VLL is reported only as an auxiliary consistency metric and shows a 2.12V RMSE. AC-compiled twin runs in a 100Hz live-replay worker, maintaining RTF=0.9998 over a 33s field test. Grid-forming extension, online state estimation, and hardware-in-the-loop tests remain future work.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat3_02"
    },
    {
      "id": "WeAT3.3",
      "paperId": "461",
      "title": "Smooth-Gradient Differentiable Simulation for Learning Quadruped Locomotion (I)",
      "session": "WeAT3",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "313945",
          "name": "Kim, Gijeong",
          "affiliation": "Korea Advanced Institute of Science and Technology, KAIST"
        },
        {
          "id": "138298",
          "name": "Park, Hae-Won",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Differentiable simulation yields analytic first-order policy gradients that can improve the sample efficiency of policy learning relative to model-free reinforcement learning, as shown on smooth systems such as quadrotors. For legged robots, however, the non-smoothness of contact renders the analytic gradient of a hard-contact step ill-suited to gradient-based policy search: evaluated within a single contact mode, it carries little information about the making and breaking of contact. Recent quadruped studies therefore smooth the backward pass, for example by back-propagating through a reduced single-rigid-body surrogate or through a dedicated differentiable contact model. We instead adopt the analytic contact-impulse gradient under a relaxed complementarity constraint, originally introduced for contact-implicit model predictive control, as the backward pass of a differentiable simulator for analytic policy gradient (APG) learning of quadruped locomotion. The simulator takes a strict hard-contact step in the forward pass and applies the relaxed Signorini gradient in the backward pass. Under this hard-forward/smooth-backward scheme the policy learns to track velocity commands, whereas APG with the non-smooth hard-contact gradient fails and the robot loses balance.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat3_03"
    },
    {
      "id": "WeAT3.4",
      "paperId": "462",
      "title": "Contact-Aided Equivariant Filter for Legged Robot State Estimation (I)",
      "session": "WeAT3",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "387222",
          "name": "Kim, Hajun",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "138298",
          "name": "Park, Hae-Won",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents a contact-aided equivariant filter for legged robot state estimation. Many nonlinear state estimators for legged robots still rely on linearization about the current estimate, which introduces linearization errors that degrade performance. To mitigate this issue, we formulate legged robot state estimation as equivariant filtering. The proposed estimator uses IMU propagation and kinematics measurements while incorporating bias states through an expanded tangent group symmetry. This yields state-independent propagation linearization for the navigated states. Simulation results show that the proposed method improves estimation performance compared with non-invariant and invariant baselines.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat3_04"
    },
    {
      "id": "WeAT3.5",
      "paperId": "463",
      "title": "Residual Learning for Model Predictive Control in Humanoid Non-Prehensile Loco-Manipulation (I)",
      "session": "WeAT3",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "314609",
          "name": "Kim, Min-Gyu",
          "affiliation": "KAIST"
        },
        {
          "id": "138298",
          "name": "Park, Hae-Won",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents a residual learning framework for model predictive control (MPC) in humanoid non-prehensile loco-manipulation. The target task is heavy-object pushing, where a humanoid robot must coordinate locomotion, balance, body posture, foot placement, and hand-object interaction forces. A nominal MPC based on simplified robot-object dynamics provides a structured and physically interpretable controller, but its performance can be limited by heuristic references and modeling assumptions on object motion and friction. To improve task expressiveness without replacing the MPC backbone, a residual planner is trained to modify high-level references, including footstep positions, body angle references, and body-height references. Simulation results on a Unitree G1 humanoid show that the residual-augmented controller learns physically meaningful pushing strategies: the feet are shifted behind the body, the torso leans toward the object, and the body height is modulated according to the gait phase. These results suggest that residual learning can enhance MPC-based humanoid loco-manipulation while preserving the structure of model-based control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat3_05"
    },
    {
      "id": "WeAT3.6",
      "paperId": "591",
      "title": "Enhanced Learned Feature Tracking and Adaptive Weighting for Visual-Inertial Odometry in Structured Environments (I)",
      "session": "WeAT3",
      "date": "2026-10-28",
      "start": "10:15",
      "end": "10:30",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "511866",
          "name": "Choi, Junwan",
          "affiliation": "KAIST"
        },
        {
          "id": "528797",
          "name": "Lee, Gee Hoon",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Vision",
        "Sensors and Signal Processing"
      ],
      "abstract": "Visual-inertial odometry can provide accurate state estimation for mobile robots and autonomous systems, but its performance often degrades in structured indoor and construction-like environments. In such scenes, weak texture, repetitive patterns, illumination changes, motion blur, and rapid motion can make visual correspondences unreliable and introduce unstable residuals into the backend optimization. This paper presents an enhanced OKVIS2-based visual-inertial odometry pipeline that improves both frontend data association and residual weighting. In the frontend, CLAHE preprocessing, SuperPoint feature extraction, and LightGlue matching are integrated to obtain more reliable feature correspondences under challenging visual conditions. To preserve compatibility with the original OKVIS2 pipeline, BRISK descriptors are computed at the learned keypoint locations, and the original geometric verification path is retained. In the backend, visual residuals are adaptively weighted using online reprojection residual statistics, while IMU residuals are adjusted using RMS jerk to reduce the influence of aggressive-motion intervals. The proposed method is evaluated on multi-camera visual-inertial sequences from the HILTI 2022 dataset and compared with the original OKVIS2 baseline. Experimental results show that the proposed pipeline improves trajectory estimation robustness in challenging structured environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat3_06"
    },
    {
      "id": "WeAT4.1",
      "paperId": "116",
      "title": "Event-Triggered Composition of ADVANCE and RETREAT for Visibility-Aware Navigation Around Blind Corners",
      "session": "WeAT4",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525524",
          "name": "Lee, Gyungho",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "184156",
          "name": "Choi, Keun Ha",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "126125",
          "name": "Kim, Kyung-Soo",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Blind corners create a coupled navigation problem because the same wall that blocks direct goal motion can also provide cover from an observer. This study considers randomized L-corner scenes with a single observer and proposes an event-triggered framework that switches between ADVANCE and RETREAT. A common local-target generator rejects collision-prone segments and ranks finite-distance targets using goal progress, clearance, and risk derived from the latest observer estimate. Under onboard detection limited to a 22 m range and a 90◦ field of view, the implementation using SAC for ADVANCE and PPO for RETREAT completed 94 of 100 held-out scenes with no collisions or RETREAT failures. Under the same switching rule, target generator, RETREAT controller, and collision guard, DWA and MPPI achieved comparable completion rates, resulting in a 93–96% range across the three ADVANCE controllers. These results indicate that the proposed switching and target-generation logic can be paired with different low-level ADVANCE controllers.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat4_01"
    },
    {
      "id": "WeAT4.2",
      "paperId": "245",
      "title": "Neural Signed Distance Field-Based Augmented Lagrangian DDP for Ground Vehicle Obstacle Avoidance",
      "session": "WeAT4",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526180",
          "name": "Shin, Jaehyun",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "392508",
          "name": "Kim, Seongyeon",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "314591",
          "name": "Shin, Jongho",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper proposes a Neural Signed Distance Field (SDF)-based Augmented Lagrangian Differential Dynamic Programming (AL-DDP) method for local path planning and obstacle avoidance of ground vehicles in rough terrain. Since environmental information obtained from onboard sensors is typically represented as a discrete map, conventional gradient-based methods are difficult to apply directly. The proposed method addresses this by constructing a Neural SDF from onboard sensor data and incorporating it as an inequality constraint within the AL-DDP framework. Simulation results demonstrate that the proposed method generates obstacle-avoiding trajectories in the evaluated scenarios, and comparisons with an APF-based DDP baseline confirm a distinct safety--tracking trade-off between cost-based and constraint-based avoidance formulations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat4_02"
    },
    {
      "id": "WeAT4.3",
      "paperId": "250",
      "title": "Look-Angle Optimized Variable Gain Guidance Law with Impact-Angle Constraint",
      "session": "WeAT4",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526178",
          "name": "Pal, Sayantan",
          "affiliation": "Indian Institute of Technology Kharagpur"
        },
        {
          "id": "526182",
          "name": "Singh, Nikhil Kumar",
          "affiliation": "Rajiv Gandhi National Aviation University"
        },
        {
          "id": "300033",
          "name": "Hota, Sikha",
          "affiliation": "IIT KHARAGPUR"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper proposes an optimization-based gain-synthesis framework for a variable gain guidance law with prescribed impact-angle constraints in planar surface-to-surface engagements against stationary and nonmaneuvering moving targets. A time-varying navigation gain, formulated as a quadratic function of the line-of-sight (LOS) angle, is adopted to satisfy impact-angle requirements while respecting seeker field-of-view (FOV) constraints and the lateral-acceleration boundedness property. Closed-form expressions are derived for the impact angle and maximum look angle, enabling guidance gains to be selected by minimizing the peak look angle subject to admissibility conditions. Numerical simulations demonstrate that the proposed guidance law achieves the desired impact angles while maintaining FOV constraints. Comparative results show improved performance in terms of interception time relative to existing guidance laws.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat4_03"
    },
    {
      "id": "WeAT4.4",
      "paperId": "302",
      "title": "A Corrector-Aided Look-Ahead Distance-Based Guidance for Online Reference Path Following with an Efficient Mid-Course Guidance Strategy",
      "session": "WeAT4",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "505373",
          "name": "Dhillon, Reva",
          "affiliation": "Indian Institute of Technology Madras"
        },
        {
          "id": "526239",
          "name": "Ravi Deepa, Agni",
          "affiliation": "Indian Institute of Technology Madras"
        },
        {
          "id": "526241",
          "name": "Das, Hrishav",
          "affiliation": "University of Illinois Urbana Champaign"
        },
        {
          "id": "526230",
          "name": "Basak, Subham",
          "affiliation": "Indian Institute of Technology Madras"
        },
        {
          "id": "195837",
          "name": "Ghosh, Satadal",
          "affiliation": "Indian Institute of Technology Madras"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Efficient path-following is crucial in most of the applications of autonomous aerial vehicles (UAVs). Among various guidance strategies presented in literature, the look-ahead distance (L_1)-based nonlinear guidance has received significant attention due to its ease in implementation and ability to maintain a low cross-track error while following simpler reference paths and generating bounded lateral acceleration commands. However, the constant value of L_1 becomes problematic when the UAV is far away from the reference path and also produces higher cross-track error while following complex reference paths having high variation in radius of curvature. To address these challenges, the notion of look-ahead distance is leveraged in an original way to develop a two-phase guidance strategy. Initially, when the UAV is far from the reference path, an optimized L_1 selection strategy is developed to guide the UAV towards the vicinity of the start point of the reference path, while maintaining minimal lateral acceleration command. Once the vehicle reaches a close neighborhood of the reference path, a novel notion of corrector point is incorporated in the constant L_1-based guidance scheme to generate the guidance command that effectively reduces the root mean square of the cross-track error and lateral acceleration requirement thereafter. Simulation results validate satisfactory performance of this proposed corrector point and look-ahead point pair-based guidance strategy, along with the developed mid-course guidance scheme. Also, its superiority over the conventional constant L_1 guidance scheme is established by simulation studies over different initial condition scenarios.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat4_04"
    },
    {
      "id": "WeAT4.5",
      "paperId": "221",
      "title": "Investigation of the NSGA-III-Based Guidance with Model Predictive Control for Vertical Takeoff Vertical Landing Hybrid Rocket System",
      "session": "WeAT4",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526070",
          "name": "Lee, Tsung-Chun",
          "affiliation": "National Yang Ming Chiao Tung University"
        },
        {
          "id": "526076",
          "name": "Wei, Shih-Sin",
          "affiliation": "National Yang Ming Chiao Tung University"
        },
        {
          "id": "526078",
          "name": "Chang, Hao-Chi",
          "affiliation": "Taiwan Space Agency"
        },
        {
          "id": "526075",
          "name": "Wang, Shuo-Chieh",
          "affiliation": "National Yang Ming Chiao Tung University"
        },
        {
          "id": "526077",
          "name": "Chang, Yuan-Ting",
          "affiliation": "National Yang Ming Chiao Tung University"
        },
        {
          "id": "227208",
          "name": "Wu, Jong-Shinn",
          "affiliation": "National Chiao Tung University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents an asynchronous guidance and control framework for the HTTP-4 vertical-takeoff-and-vertical-landing hybrid rocket. Extended Non-dominated Sorting Genetic Algorithm III (NSGA-III) guidance balances propellant consumption, maneuver time, and horizontal landing error through feasibility-first handling and warm-started replanning. A 20-Hz nonlinear model predictive controller (NMPC) incorporates six-degree-of-freedom dynamics, actuator constraints, identified thrust dynamics, and a four-step command queue for the nominal 0.20-s transport delay. The hot-fire mean delay is 0.1828~s; mean AM437x execution times are 49.37~ms for NMPC and 3.868~s for online NSGA-III. NMPC reduces the representative-mission three-dimensional tracking root-mean-square error from 9.981 to 4.428~m. Across 500 randomized closed-loop landings, the mean and maximum horizontal errors are 1.814 and 4.365~m.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat4_05"
    },
    {
      "id": "WeAT4.6",
      "paperId": "622",
      "title": "LocalVLM-TPR: Local Vision-Language Model-Based Task Planning and Re-Planning for Robotic Manipulation",
      "session": "WeAT4",
      "date": "2026-10-28",
      "start": "10:15",
      "end": "10:30",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "531043",
          "name": "Wang, Shih-Ting",
          "affiliation": "National Chung Hsing University"
        },
        {
          "id": "531041",
          "name": "Chao, Yin-Fan",
          "affiliation": "National Chung Hsing University"
        },
        {
          "id": "531039",
          "name": "Chen, Yi-Fan",
          "affiliation": "National Chung Hsing University"
        },
        {
          "id": "531044",
          "name": "Li, I-Hsum",
          "affiliation": "National Chung Hsing University"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robotic Applications"
      ],
      "abstract": "Tabletop robotic tasks often require visual understanding of changing object locations, spatial relationships, and execution states, while cloud-based large models may introduce API cost, network dependence, and privacy concerns. This paper presents LocalVLM-TPR, a locally deployed vision-language model framework for robotic task planning and re-planning. The system combines eye-to-hand and eye-in-hand vision to support scene perception, task planning, execution validation, and failure recovery. A logic audit is used to check plan feasibility, while pre-action, post-action, and final-goal validation form a closed-loop execution process. When a local failure occurs, plug-in re-planning generates a corrective subtask. Experiments on three tabletop tasks show that LocalVLM-TPR achieves a 93.33% average success rate, close to the cloud-based ReplanVLM baseline with 96.67%, while avoiding cloud-based inference.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat4_06"
    },
    {
      "id": "WeAT5.1",
      "paperId": "25",
      "title": "Disturbance-Aware RL-PID with LLM Guidance for Robust Manipulator Control",
      "session": "WeAT5",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "423784",
          "name": "Pertin, Guining",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "104290",
          "name": "Chang, Dong Eui",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "This paper introduces a disturbance-aware reinforcement learning (RL)-based adaptive PID control framework for robust tracking control of manipulators operating on dynamic naval platforms. The control architecture integrates a feedback-linearizing PID controller with a nonlinear disturbance observer, yielding safety-constrained PID gain bounds. An RL agent utilizes disturbance estimates and runs asynchronously to adaptively tune the PID gains within the gain bounds for safety, robustness, and optimal performance. To improve training efficiency, an automated expert policy generation pipeline is designed based on large language models to initialize the RL policy through behavior cloning. The agent is trained in simulation under varying sea-state conditions and domain randomization, and validated on a ROBOTIS OpenMANIPULATOR-X robot mounted on a Stewart platform. Our results demonstrate improved training efficiency over standard RL baselines and non-expert behavior cloning methods, with superior performance and robustness compared to conventional PID tuning and prior adaptive RL-PID approaches.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat5_01"
    },
    {
      "id": "WeAT5.2",
      "paperId": "142",
      "title": "QuaSI: An Integrated System Identification and Simulation Framework for Quadrotor Research",
      "session": "WeAT5",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "375499",
          "name": "van Beers, Jasper",
          "affiliation": "Delft University of Technology"
        },
        {
          "id": "375962",
          "name": "Solanki, Prashant",
          "affiliation": "Delft University of Technology"
        },
        {
          "id": "183401",
          "name": "de Visser, Coen",
          "affiliation": "TU Delft"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "Quadrotor research benefits from accurate system models and simulation environments, facilitating novel controller design and evaluation. This is especially important for quadrotor applications which diverge from the conventional near-hover regime, such as drone racing and acrobatic flight. To assist with such research, we develop QuaSI: an integrated Python-based quadrotor identification and simulation framework. QuaSI allows users to identify customizable models of their own quadrotor platforms and deploy these directly in an accompanying (or their own) simulation environment. To accommodate diverse user needs and quadrotor designs, QuaSI allows one to define their own model structure and basis variables, in addition to the standard first principle-based terms. As a sanity check, QuaSI also reports on the expected validity of the identified models. These insights can help users find regions of the flight envelope where their models produce reliable predictions alongside those where it struggles and may require additional data. QuaSI therefore assists researchers in quickly deploying and improving upon their (custom) quadrotor and subsequent controller designs.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat5_02"
    },
    {
      "id": "WeAT5.3",
      "paperId": "371",
      "title": "AsyncFlow: Asynchronous Prefetch with Multi-Waypoint Crossfade for Smooth VLA Model Execution",
      "session": "WeAT5",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525769",
          "name": "Kumar, Abhishek",
          "affiliation": "Korea Institute of Machinery and Material"
        },
        {
          "id": "227322",
          "name": "Abbasi, Saad Jamshed",
          "affiliation": "Pusan National University"
        },
        {
          "id": "525761",
          "name": "Kim, Jeong Yong",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "414382",
          "name": "Sanaullah, Sanaullah",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "124478",
          "name": "Han, Byung-Kil",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "185961",
          "name": "Park, Dongil",
          "affiliation": "Korea Institute of Machinery and Materials (KIMM)"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Vision-Language-Action (VLA) models generate robot actions in fixed-length inference chunks, amortizing neural evaluation cost but introducing two practical problems: the robot idles during inference, and a freshly predicted chunk rarely starts from where the robot actually is, producing a jarring velocity jump at every chunk boundary. A third issue appears on startup, where the first predicted action commands a pose far from the robot’s current configuration, causing an initialization lurch. This paper describes AsyncFlow, an execution-layer system addressing all three problems without any changes to the VLA itself. AsyncFlow stays permanently ahead of the next inference: while the robot executes the current chunk, the next chunk runs in the background. At chunk boundaries, AsyncFlow blends consecutive chunks smoothly over a 6-step overlap window, substantially attenuating the velocity jump at each handoff (smoothstep blending achieves C1 continuity). It publishes multiple future waypoints per control tick rather than a single action, giving the lowlevel controller a 400 ms lookahead horizon (4 waypoints × 100 ms at 10 Hz evaluation rate). On startup, it gently eases from the robot’s observed pose into the model trajectory over 16 steps, removing the initialization lurch. On a ROBOTIS AI Worker running GR00T 1.6N on a paint brush pick-and-place task, AsyncFlow achieves 99.2% prefetch hit rate, 12× lower velocity jump, 9× lower RMS jerk, and 98% task success – a +33 percentage-point gain over the 65% synchronous baseline (+50.8% relative) – without any modification to the underlying VLA. On this task and model, the remaining 2% failure rate is attributed to gripper hardware limitations; broader evaluation across tasks and models would be needed to confirm generalizability.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat5_03"
    },
    {
      "id": "WeAT5.4",
      "paperId": "377",
      "title": "MPC-Derived Real-Time Rules for Energy Management of a Hybrid Marine Propulsion System",
      "session": "WeAT5",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526097",
          "name": "Moradi, Mohammad Hossein",
          "affiliation": "ETH Zurich"
        },
        {
          "id": "526101",
          "name": "Zinsli, Simon",
          "affiliation": "ETH Zurich"
        },
        {
          "id": "526995",
          "name": "Ye, Yunpeng",
          "affiliation": "ETH Zürich"
        },
        {
          "id": "526469",
          "name": "Wenig, Markus",
          "affiliation": "ETH Zurich"
        },
        {
          "id": "304749",
          "name": "Onder, Christopher",
          "affiliation": "ETH Zürich"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Devices and Instruments",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents an integrated modeling, optimization, and control framework for the energy management of a hybrid marine propulsion system comprising a two-stroke dual-fuel main engine, a shaft-mounted Power-Take-Off/Power-Take-In (PTO/PTI) generator, a battery energy storage system (BESS), and three auxiliary generator sets. An Artificial Neural Network (ANN) model trained by a collaborating institution is used to represent the nonlinear fuel consumption map of the main engine; an equivalent-circuit battery model and piecewise-linear genset maps complete the plant description. The ANN is embedded into a Mixed-Integer Linear Programming (MILP) solver via a convex piecewise-linear (PWL) approximation, yielding a computationally tractable Model Predictive Control (MPC) scheme, with Dynamic Programming (DP) as the offline global benchmark. Results on a real-world 24-hour voyage show that MILP achieves 5.49% cost reduction relative to the conventional baseline and 1.87% over the existing rule-based max-PTO strategy. A key finding is that recurring MILP control patterns, encoded as five causal rules, yield a real-time controller that outperforms the extended MPC with a 60-minute horizon by 0.5% — a direct consequence of the computational budget constraining the online optimizer to a short prediction window, preventing it from anticipating the main engine shutdown and executing the battery pre-charge strategy identified by the full-horizon solution.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat5_04"
    },
    {
      "id": "WeAT5.5",
      "paperId": "376",
      "title": "Fast Event Camera Simulator Based on Temporal Interpolation with Pixel Refiring Interval Distributions",
      "session": "WeAT5",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "344725",
          "name": "Nagasawa, Satoshi",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        },
        {
          "id": "122439",
          "name": "Ho, Van",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        },
        {
          "id": "179460",
          "name": "Ji, Yonghoon",
          "affiliation": "Hokkaido University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "Event-based cameras asynchronously detect brightness changes at each pixel and are promising for high-speed perception and low-latency robotic control. However, collecting real event data remains challenging due to sensor availability, experimental reproducibility, and ground-truth acquisition. In this paper, we propose a fast event-based camera imulatorbased on same-pixel refiring interval distributions estimated from real event data. The proposed method generates event candidates from inter-frame log-intensity differences, and then selects events and interpolates their timestamps using a probabilistic refiring model. This enables the simulator to reproduce sensor-like temporal firing structures without explicitly simulating detailed pixel circuit responses. Experiments using DAVIS346 event data show that the proposed method achieved the smallest Wasserstein distance of 0.16 among the evaluated simulators while maintaining a processing speed of 631 fps. The proposed method also produced spatial event structures closer to those of real sensors than existing methods. These results suggest that the proposed method efficiently generates event streams with temporal and spatial characteristics close to those of real sensors.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat5_05"
    },
    {
      "id": "WeAT5.6",
      "paperId": "225",
      "title": "Tilt-Aided Magnetometer Calibration for Heading Estimation in Dynamic Motion",
      "session": "WeAT5",
      "date": "2026-10-28",
      "start": "10:15",
      "end": "10:30",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526113",
          "name": "Dundar, Osman Harun",
          "affiliation": "Middle East Technical University"
        },
        {
          "id": "354187",
          "name": "Soken, Halil Ersin",
          "affiliation": "Middle East Technical University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "A three-axis magnetometer supplies the heading that inertial sensing cannot bound, but only once calibration removes the hard- and soft-iron, scale-factor, non-orthogonality and mounting-misalignment errors that displace the reported field direction. Calibration from field magnitude alone is autonomous yet structurally blind to the mounting rotation, which is precisely the quantity heading reads; full-attitude calibration recovers that rotation at the cost of presupposing the heading it exists to establish. This paper shows that gravity-referenced calibration escapes both. The magnitude and inclination constraints identify the complete twelve-parameter model wherever the platform’s tilt varies, and lose a rotation about the local vertical only at constant tilt, so the deficiency is a property of the motion rather than of the constraint set. Gravity Referenced Attitude Constraint Estimation - Magnetometer Calibration(GRACE-MC) measures the tilt diversity of its own record through a single eigenvalue and selects its parameterization from the result. Evaluated against five baselines on real fluxgate data from a moderate-excitation motion profile repeated six times, it holds 1.6◦ mean heading error with no heading reference at any stage and under an injected mounting rotation it attributes the entire injection to the rotation channel, leaving the recovered scale factors, non-orthogonality angles and bias magnitude unmoved, as an estimator supplied with the full attitude does.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat5_06"
    },
    {
      "id": "WeAT6.1",
      "paperId": "391",
      "title": "A DNA Strand-Displacement Circuit for Learning, Memory, and Forgetting Inspired by Pavlovian Classical Conditioning",
      "session": "WeAT6",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "463536",
          "name": "Kawasaki, Kouta",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "408258",
          "name": "Nakakuki, Takashi",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Biochemical reaction networks in living organisms can adapt their behavior according to past experiences. Reconstructing such adaptive behavior using artificial molecular systems is an important challenge in DNA computing and synthetic biology. In this study, we propose a refined DNA strand-displacement circuit for Pavlovian classical conditioning with learning and forgetting functions. The circuit changes its response through repeated simultaneous stimulation and subsequently exhibits a conditioned response to a previously neutral stimulus. Numerical simulations reproduce learning, conditioned response, and forgetting processes, demonstrating improved learning performance compared with previous conditioning circuits. Sensitivity analysis under internal concentration perturbations showed that the baseline design was representative of the overall perturbation distribution. Input-strength analysis further showed that stimulus strength modulated both learning performance and memory retention; the learning rate reached a maximum under moderate input enhancement, whereas the forgetting rate continuously decreased with increasing input strength. These results suggest that the proposed circuit provides a feasible basis for implementing molecular learning and memory functions using DNA strand displacement.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat6_01"
    },
    {
      "id": "WeAT6.2",
      "paperId": "467",
      "title": "Comparing Pretrained Vision Encoders for Nerve Detection in Histopathology: Performance and Feature Representation Analysis",
      "session": "WeAT6",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528005",
          "name": "Panyaprachum, Phutthabut",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "406652",
          "name": "Anuntachai, Anuntapat",
          "affiliation": "KMITL"
        },
        {
          "id": "526730",
          "name": "Netisopakul, Ponrudee",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "528122",
          "name": "Kittichai, Veerayuth",
          "affiliation": "KMITL"
        },
        {
          "id": "528273",
          "name": "Poomsawat, Sopee",
          "affiliation": "Department of Oral and Maxillofacial Pathology, Faculty of Dentistry, Mahidol University"
        },
        {
          "id": "528259",
          "name": "Choakdeewanitthumrong, Sirada",
          "affiliation": "Department of Oral and Maxillofacial Pathology, Faculty of Dentistry, Mahidol University, Bangkok, Thailand"
        },
        {
          "id": "528238",
          "name": "Boonsang, Siridech",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Detecting peripheral nerve tissue in histopathology supports perineural-invasion assessment and nerve-sparing surgery, yet nerves are easily confused with stroma and vessels. We present a controlled comparison of four frozen pretrained vision encoders: two domain-specific pathology models (cTransPath and Phikon), a general-purpose vision–language model (CLIP ViT-L/14), and an ImageNet baseline (ResNet-50), plus an early-fusion variant, under an identical linear probing protocol. On 62 H&E images at 10× from 31 patients, patches were sampled by a sliding window and evaluated with patient-level 5-fold cross-validation to prevent leakage. Both domain-specific encoders far outperformed the rest; Phikon was numerically strongest (ROC AUC 0.999 vs. 0.991 for cTransPath), though the two were not separated at five folds. Each beat CLIP (0.948) and ResNet-50 (0.937) in every fold (paired t-test p < 0.05); fusion gave no gain. CKA shows the two pathology encoders learn highly similar representations (CKA 0.91) that are distinct from CLIP (0.58). In full-image detection the two pathology encoders were also the most precise (Phikon: 0.80 sensitivity at 0.58 false positives per image; cTransPath: 0.71 at 0.86), dominating the low-false-positive region of the FROC curve, and Eigen-CAM shows cTransPath concentrates on the nerve while CLIP responds to scattered points. For fine-grained histopathology, the pretraining domain, rather than the specific model, is the dominant factor, and a linear probe on a domain-specific encoder is sufficient and label-efficient.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat6_02"
    },
    {
      "id": "WeAT6.3",
      "paperId": "416",
      "title": "Quantitative Evaluation of VR Sickness Symptoms Using Eye Movement Control Modeling",
      "session": "WeAT6",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525897",
          "name": "Saito, Akira",
          "affiliation": "Tohoku University"
        },
        {
          "id": "525898",
          "name": "Sugita, Norihiro",
          "affiliation": "Tohoku University"
        },
        {
          "id": "525901",
          "name": "Komiyama, Takumi",
          "affiliation": "Tohoku University"
        },
        {
          "id": "525902",
          "name": "Sato, Yuta",
          "affiliation": "Tohoku University"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Control Theory and Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "Real-time and objective evaluation of virtual reality (VR) sickness requires an index that remains valid when the visual stimulus is not controlled in advance. We propose a model-based evaluation framework built on an eye movement reproduction model that combines the vestibulo-ocular reflex (VOR) and smooth pursuit eye movement (SPEM) and is identified individually for each user. Because the model is driven by head motion and by the motion of an arbitrary gaze target, it does not presuppose any specific visual stimulus. Two detection methods are derived from the model: Method 1 quantifies the overall deviation between the model output (identified before exposure) and the actual gaze measured after exposure, whereas Method 2 quantifies the changes in each model parameter between these two conditions. In an experiment with 29 participants, the post/pre ratio of the plant time constant was larger in severe VR sickness cases than in mild cases. While this was the largest effect among all estimated parameters, it did not survive correction for multiple comparisons at the present sample size. The results demonstrate that our framework localizes the physiological change to a specific subsystem using an index that does not presuppose a specific visual stimulus.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat6_03"
    },
    {
      "id": "WeAT6.4",
      "paperId": "579",
      "title": "Autonomous Feedback Control of Multi-Cellular Metabolic Networks Via Population-Level Approximation and Deep Reinforcement Learning",
      "session": "WeAT6",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528743",
          "name": "Shimizu, Daiki",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "408258",
          "name": "Nakakuki, Takashi",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Information and Networking",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Metabolic diseases such as diabetes result from the breakdown of complex multi-cellular and multi-organ networks. Traditional ordinary differential equation models struggle with the computational complexity of simulating the interactions of billions of heterogeneous cells. To address the problem, we propose an approach that integrates a population-level approximation with reinforcement learning to analyze liver energy metabolism. By modeling individual hepatocytes as autonomous agents, we employ a deep deterministic policy gradient algorithm to comprehensively optimize their individual actions---such as local reaction gains and hormone-like responses---to maintain internal Acetyl-CoA homeostasis within a shared circulatory environment. Simulations using the proposed topological model demonstrate that this local optimization successfully regulates macroscopic blood glucose levels. Furthermore, applying the learned policy to a heterogeneous population of 100 cells with varying metabolic parameters showed robust collective homeostasis. The system maintained stability under parameter noise up to 20%, beyond which it exhibited systemic destabilization analogous to pathological decompensation. This population-level framework effectively bridges microscopic cellular behaviors and macroscopic organ functions, offering a new approach for analyzing metabolic network diseases.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat6_04"
    },
    {
      "id": "WeAT6.5",
      "paperId": "648",
      "title": "Development of a Cascade Nucleic Acid Amplification Model for Early Detection of Pancreatic Cancer Via miRNA Detection",
      "session": "WeAT6",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "532026",
          "name": "Ishikawa, Seiyou",
          "affiliation": "Kyushu Institute of Technology University"
        },
        {
          "id": "408258",
          "name": "Nakakuki, Takashi",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Information and Networking",
        "Sensors and Signal Processing"
      ],
      "abstract": "Pancreatic cancer has an extremely poor prognosis due to difficulties in early diagnosis. To achieve a highly sensitive screening method, microRNA (miRNA) biomarkers have attracted significant attention. In this study, we propose a cascade signal amplification model that integrates two DNA computing circuits: Catalytic Hairpin Assembly (CHA) and an Entropy-Driven Circuit (EDC). Numerical simulations confirmed a synergistic amplification effect and an ideal sigmoidal response that mitigates leaky reactions. Furthermore, in vitro experiments were conducted to evaluate the individual behaviors of the constituent circuits. The results validate the feasibility of miRNA detection using the proposed framework while highlighting specific sequence design refinements required for seamless physical integration.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat6_05"
    },
    {
      "id": "WeAT7.1",
      "paperId": "272",
      "title": "KGAB-ViT: Keypoint-Guided Attention Bias Vision Transformer for Facial Emotion Recognition",
      "session": "WeAT7",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "405875",
          "name": "Tahira, Nusrat Jahan",
          "affiliation": "Kyungsung University"
        },
        {
          "id": "407794",
          "name": "Park, Jang-Sik",
          "affiliation": "Kyungsung University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Facial emotion recognition (FER) in the wild remains challenging due to pose variation, illumination, and occlusion. While Vision Transformer (ViT) models achieve strong results, they treat all image patches equally, discarding the anatomical prior that emotions arise from localized muscle-group activations. We propose KGAB-ViT (KeypointGuided Attention Bias ViT), which injects face keypoint information as additive Gaussian heatmap biases directly into the ViT attention logits at every encoder layer. A per-layer learned gate grows with network depth, allowing early layers to explore freely while later layers lock onto emotion-relevant face anatomy. On AffectNet-8, KGAB-ViT achieves 72.27% top-1 accuracy, surpassing our plain ViT-B/16 baseline by 1.62 pp and the best published AffectNet-8 result by 8.50 pp.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat7_01"
    },
    {
      "id": "WeAT7.2",
      "paperId": "387",
      "title": "A Unified Deep Learning Pipeline for Photoquadrat Localization and Per-Cell Seagrass Coverage Classification",
      "session": "WeAT7",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "459706",
          "name": "Barro, Shiela Mae",
          "affiliation": "Mindanao State University Iligan Institute of Technology"
        },
        {
          "id": "528022",
          "name": "Villame, Cherry Mae",
          "affiliation": "Mindanao State University - Iligan Institute of Technology"
        },
        {
          "id": "528021",
          "name": "Alindayo, Leah",
          "affiliation": "Mindanao State University - Iligan Institute of Technology"
        },
        {
          "id": "528019",
          "name": "Bahinting, Maria Fe",
          "affiliation": "Mindanao State University - Iligan Institute of Technology"
        },
        {
          "id": "536372",
          "name": "Mirayo, Angel Lyn",
          "affiliation": "Mindanao State University - Iligan Institute of Technology"
        },
        {
          "id": "536373",
          "name": "Narvaez, Aileen",
          "affiliation": "Mindanao State University - Iligan Institute of Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Seagrass ecosystems support coastal biodiversity and blue-carbon storage, but conventional monitoring under the DA-BFAR Participatory Resource and Socio-Economic Assessment framework remains labor-intensive and observer dependent. This study developed a camera-equipped quadrat and a two-stage deep learning pipeline for automated seagrass-cover assessment in Kauswagan, Lanao del Norte, Philippines. Stage 1 localized the quadrat frame from tide stratified underwater video. The selected YOLO26m-seg model achieved a test mask mAP@50 of 99.5%, with 100% precision and 99.85% recall. Stage 2 classified the quadrat’s 100 grid cells into seven modified Saito–Atobe coverage indices. Among ten evaluated variants, YOLO26l-seg achieved validation and test mask mAP@50 values of 95.73% and 86.98%, respectively. Across 16 test quadrats, model-derived percent cover showed strong agreement with expert verification, with an MAE of 3.11 percentage points, RMSE of 6.01 percentage points, and bias of −1.72 percentage points. The system automatically generates percent-cover estimates, coverage-index heatmaps, and habitat-condition classifications, providing a consistent approach to cell-level seagrass assessment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat7_02"
    },
    {
      "id": "WeAT7.3",
      "paperId": "401",
      "title": "SmarTax: An Automated Insect Digitization System Integrating AI-Based Identification and Interactive 3D Visualization of Selected Coleoptera",
      "session": "WeAT7",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527509",
          "name": "Sator, Renemy",
          "affiliation": "Mindanao State University-Iligan Institute of Technology"
        },
        {
          "id": "528022",
          "name": "Villame, Cherry Mae",
          "affiliation": "Mindanao State University - Iligan Institute of Technology"
        },
        {
          "id": "528021",
          "name": "Alindayo, Leah",
          "affiliation": "Mindanao State University - Iligan Institute of Technology"
        },
        {
          "id": "528113",
          "name": "Mondejar, Eddie",
          "affiliation": "Mindanao State University-Iligan Institute of Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Insects play a significant role in the stability of ecosystems, biodiversity conservation and environmental monitoring. However, traditional methods of insect identification and preservation are time-consuming, tedious, and require taxonomic expertise. This paper introduces SmarTax, a unified system that integrates artificial intelligence-based insect identification and high-resolution 3D digitization of selected Coleoptera specimens. The system uses a controlled single-camera imaging setup with a motorized turntable to obtain multi-angle insect images. The captured multi-view images were used for photogrammetric reconstruction, while representative images from the same acquisition process were selected to train a YOLOv8-based identification model to detect morphological features and classify insect specimens. This study covers the families of beetles: Scarabaeidae, Curculionidae, Cerambycidae, Tenebrionidae and Passalidae. The YOLOv8m model achieved 81.88% precision, 73.68% recall, a 77.57% F1-score, and 76.89% mAP@0.5, while comparison of model dimensions with ImageJ-based references yielded an overall mean absolute percentage error of 4.18%. These results demonstrate the capability of SmarTax to support automated insect identification, interactive examination of pre-generated 3D insect models, and digital biodiversity documentation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat7_03"
    },
    {
      "id": "WeAT7.4",
      "paperId": "119",
      "title": "Vision-Language Models As Copilots for Autonomous UAV Navigation: Analysis of Latency and Reliability in Degraded Environments",
      "session": "WeAT7",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "351948",
          "name": "Jacobs Sodre Pereira, Hiago",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "524617",
          "name": "Barcelona, Sebastian",
          "affiliation": "UTEC"
        },
        {
          "id": "524690",
          "name": "Sandìn Dutra, Vincent Nicolàs",
          "affiliation": "UTEC Universidad De Tecnilogìa Del Uruguay"
        },
        {
          "id": "524619",
          "name": "Moraes, Pablo",
          "affiliation": "Universidad Tecnologica Del Uruguay"
        },
        {
          "id": "524779",
          "name": "Mazondo, Ahilen",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "524781",
          "name": "Nunes da Costa, Igor",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "525669",
          "name": "Moraes de los Santos, William Michael",
          "affiliation": "Universidad Tecnológica Del Uruguay"
        },
        {
          "id": "254028",
          "name": "Kelbouscas, André",
          "affiliation": "FURG"
        },
        {
          "id": "270442",
          "name": "Grando, Ricardo",
          "affiliation": "Federal University of Rio Grande"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "The integration of Vision-Language Models (VLMs) in autonomous Unmanned Aerial Vehicles (UAVs) offers unprecedented semantic reasoning capabilities. However, real-time closed-loop navigation requires not only low inference latency but also obedience to structured flight commands. This paper proposes a hybrid FSM-VLM control architecture for UAVs in GPS-free environments. The system combines a deterministic Finite State Machine (FSM) for low-level physical control with an asynchronous VLM copilot for high-level semantic pathfinding. We evaluate three models with different parameter scales in a Software-In-The-Loop (SITL) simulation. The framework isolates and measures syntax errors at the format level versus semantic hallucinations at the logic level in a normal and degraded scenario. The results indicate that structured reasoning reliability, rather than inference latency alone, is more closely associated with successful mission execution in the proposed hybrid architecture.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat7_04"
    },
    {
      "id": "WeAT7.5",
      "paperId": "143",
      "title": "Comparative Evaluation of Greedy Optimization, Hybrid Greedy-PPO, and End-To-End PPO Approaches for Energy-Aware Multi-Drone Last-Mile Delivery with Battery Constraints",
      "session": "WeAT7",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "404520",
          "name": "Krendeleva, Angelina",
          "affiliation": "Polytechnic University of Bari"
        },
        {
          "id": "525816",
          "name": "Gharsalli, Leila",
          "affiliation": "Institut Polytechnique Des Sciences Avancées (IPSA)"
        },
        {
          "id": "525812",
          "name": "Alvarez, Jonatan",
          "affiliation": "Institut Polytechnique Des Sciences Avancées (IPSA)"
        },
        {
          "id": "104889",
          "name": "Mangini, Agostino Marcello",
          "affiliation": "Politecnico Di Bari"
        },
        {
          "id": "102638",
          "name": "Fanti, Maria Pia",
          "affiliation": "Polytechnic University of Bari"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems",
        "Robotic Applications"
      ],
      "abstract": "The rapid growth of e-commerce requires efficient and scalable last-mile drone delivery systems. This paper presents a comparative evaluation of three scheduling approaches for a fleet of four homogeneous Unmanned Aerial Vehicles (UAVs) serving 100 customers within a 480-minute horizon under a strict minimum battery level of 30%. We investigate: (1) a Classical Greedy Optimization, (2) a Hybrid Greedy-PPO Approach, and (3) an end-to-end PPO approach trained from scratch. All methods account for payload-dependent energy consumption and recharging constraints. Experimental results show that the end-to-end PPO approach reduces makespan by 9.9% and charging operations by 57.7% compared with the greedy baseline. All schedules are validated in Gazebo with a simulation gap limited to 2.7-3.1%, confirming practical feasibility of the proposed framework.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat7_05"
    },
    {
      "id": "WeAT7.6",
      "paperId": "449",
      "title": "Latent Activation Control of Mamba Using Control Barrier Function",
      "session": "WeAT7",
      "date": "2026-10-28",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528332",
          "name": "Kim, Kisong",
          "affiliation": "Institute of Science Tokyo"
        },
        {
          "id": "528338",
          "name": "Sasahara, Hampei",
          "affiliation": "The University of Tokyo"
        },
        {
          "id": "110572",
          "name": "Imura, Jun-ichi",
          "affiliation": "Tokyo Institute of Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Ensuring the safety of Large Language Models (LLMs) is a critical challenge. While existing activation engineering methods offer computationally efficient alternatives to fine-tuning, they typically rely on static and indiscriminate interventions that can degrade the model's inherent inference abilities. To address this, we propose a novel, dynamic activation control framework for Mamba utilizing a low-dimensional latent space and Control Barrier Functions (CBFs). First, we map the high-dimensional activations into a low-dimensional latent space via a supervised autoencoder, defining a safe set using a Gaussian Mixture Model (GMM). During inference, if the internal state breaches this safety boundary, an optimal intervention vector is dynamically computed via gradient-based optimization to steer the state back into the safe region. Unlike conventional activation engineering, our proposal operates only when necessary, minimizing unnecessary modifications to the model's representations. Experimental evaluations using the mamba-2.8b model on the Real Toxicity Prompts dataset demonstrate that the proposed method significantly reduces toxic text generation while providing clear interpretability and mathematical safety guarantees.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat7_06"
    },
    {
      "id": "WeAT8.1",
      "paperId": "132",
      "title": "Learning Guided Multi-UAV Mission Reallocation under Dynamic Threat Environments (I)",
      "session": "WeAT8",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "462238",
          "name": "Lee, Kiyoon",
          "affiliation": "Hanyang University"
        },
        {
          "id": "461997",
          "name": "Lee, Jinyoung",
          "affiliation": "Hanyang University"
        },
        {
          "id": "314536",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper proposes a D^*-certified learning-guided mission reallocation framework for multi-UAV coverage missions under dynamic threat environments. In surveillance and reconnaissance missions, newly emerging threats can invalidate pre-planned target points and route segments, requiring online replanning and target reassignment. Although D^*-style incremental planning provides reliable local path replanning in changing maps, it does not directly handle mission-level decisions such as target priority, skipped-value loss, and workload balance among UAVs. To solve this problem, the proposed framework retains deterministic D^* planning as a safety core and introduces a lightweight learning module to estimate target-level mission values. The learned mission values are incorporated into a unified reallocation objective with D^*-based travel cost, risk, makespan, workload balance, skipped-value penalty, and coverage reward. Thus, the learning module guides mission reassignment without directly generating executable paths, while D^* guarantees that the final routes satisfy hard grid-path safety constraints. Simulation results show that the proposed method preserves zero unsafe crossing and improves mission-level reassignment performance, particularly in local dynamic-threat scenarios.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat8_01"
    },
    {
      "id": "WeAT8.2",
      "paperId": "156",
      "title": "Occlusion-Aware Relational Visual Localization Via 3D Gaussian Splatting in Complex Indoor Environments (I)",
      "session": "WeAT8",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "471620",
          "name": "Chu, Ba Tuan Hoang",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "437595",
          "name": "Phan, Thanh-Danh",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "6-DoF visual localization in complex indoor environments confronts the fundamental challenge of perceptual aliasing, exacerbated by long-term dynamic scene variations and severe occlusions. To overcome the limitations of purely geometric methods, integrating 3D Gaussian Splatting (3DGS) with semantic awareness has emerged as a breakthrough paradigm. Vision-Language Models (VLMs) play a pivotal role in this context by providing powerful viewpoint-dependent spatial relational priors. However, this integration encounters a core theoretical barrier: the modality gap under partial observability. Specifically, VLMs are highly prone to geometric hallucinations when reasoning about occluded objects, while static 3D landmarks fail to represent the viewpoint-dependent centroid shift. We propose a generalized localization framework that embeds occlusion awareness into a spatial optimization model. By applying an epistemic-bounded Set-of-Mark (SoM) mechanism, we compel the VLM to infer relationships solely from strictly visible regions. Furthermore, by redefining 3D objects as a distribution of spatial hypotheses and establishing a continuous ray-casting pruning mechanism, the proposed framework drastically reduces the search space, setting a new benchmark for robust single-shot global localization under extreme environmental conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat8_02"
    },
    {
      "id": "WeAT8.3",
      "paperId": "159",
      "title": "A Degeneracy-Aware Multi-Camera Visual-Inertial Odometry for Perceptually Challenging Environments (I)",
      "session": "WeAT8",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "415390",
          "name": "Tran, Quoc Duy",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Vision",
        "Sensors and Signal Processing"
      ],
      "abstract": "Visual-Inertial Odometry (VIO) systems often suffer performance degradation in visually challenging environments containing illumination variation, dense vegetation, dynamic objects, and occlusions. Although multi-camera systems improve visual coverage and geometric redundancy, most existing frameworks directly aggregate observations from all cameras into a unified optimization process without explicitly considering the observability quality of each individual viewpoint. As a result, unreliable visual constraints from degraded cameras can deteriorate the numerical stability of the optimization process and reduce localization robustness. To address this limitation, this paper presents a robust non-overlapping multi-camera VIO framework with camera-wise degeneracy awareness. First, a degeneracy detection module is proposed to analyze the observability condition of each camera independently using the visual Hessian matrix, enabling the identification of locally weakly observable visual constraints. Second, a degeneracy-aware mitigation strategy is introduced to suppress unreliable optimization updates caused by degraded visual measurements while preserving reliable geometric information from healthy viewpoints. Finally, the proposed framework is evaluated on both public benchmarks and self-collected datasets under diverse perceptually degraded environments. Experimental results demonstrate that the proposed system achieves superior robustness and estimation accuracy compared to state-of-the-art (SOTA) multi-camera VIO methods.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat8_03"
    },
    {
      "id": "WeAT8.4",
      "paperId": "162",
      "title": "Memory-Based Deep Reinforcement Learning on Topological Sub-Goal Generation for Mobile Robot Navigation under Unknown Environment (I)",
      "session": "WeAT8",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525896",
          "name": "Nguyen, TienDat",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "437595",
          "name": "Phan, Thanh-Danh",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents a memory-based navigation framework fusing deep reinforcement learning with gap-based method to tackle local minima and partial observability in unknown environments. We integrate an LSTM-augmented Soft Actor-Critic (SAC) policy to model sequential sensor data into latent belief states for improved environment awareness. To ensure robust training without reward hacking, a dense reward function utilizing a gated trajectory progress penalty is introduced. Additionally, a sub-goal manager is deployed to extract the robot from deadlocks detected via LiDAR. Evaluated using ROS and Gazebo, our framework demonstrates capability over reactive baselines in escaping traps while maintaining high computational efficiency during real-time online deployment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat8_04"
    },
    {
      "id": "WeAT8.5",
      "paperId": "166",
      "title": "Pose–LiDAR Guided Object Association for Sparse SAM Masks and Object-Aware 3D Gaussian Splatting (I)",
      "session": "WeAT8",
      "date": "2026-10-28",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525904",
          "name": "Jung, Hyundo",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Robot Vision"
      ],
      "abstract": "Sparse class-agnostic masks from the Segment Anything Model (SAM) provide rich object hypotheses for outdoor mapping, yet per-frame local IDs break temporal consistency and degrade object-aware 3D Gaussian Splatting (3DGS). We propose a pose–LiDAR association module that warps recent keyframe masks with LiDAR–visual inertial odometry (LIVO), fuses a short multi-keyframe prior, and recovers global IDs by bipartite Hungarian matching under sparse detections, with an explicit indoor/outdoor warp-gating rule. Associated IDs supervise 3DGS through pose consistent identity seeding (PCIS), association-confidence weighting (ACW), and an associated-ID 3D consistency loss Lid3d. On outdoor LIVO sequences and KITTI-360, re-associating identical detections approaches a mask-IoU Hungarian oracle and surpasses MOT/VOS peers (KITTI ID persistence 0.97 vs. oracle 0.94). Consistent IDs enable strong holdout instance quality: Replica mIoU 0.85 / fwIoU 0.98; KITTI-360 fwIoU 0.49, exceeding Gaussian Grouping and SGS-SLAM under a matched evaluation protocol.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat8_05"
    },
    {
      "id": "WeAT8.6",
      "paperId": "168",
      "title": "Intent-Guided Action Representation Learning for Dexterous Hand Control in Vision-Language-Action Models (I)",
      "session": "WeAT8",
      "date": "2026-10-28",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525924",
          "name": "Jin, Minchan",
          "affiliation": "Hanyang University"
        },
        {
          "id": "461643",
          "name": "Kim, Geunha",
          "affiliation": "Hanyang University"
        },
        {
          "id": "314536",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Vision-Language-Action models (VLAs) provide a unified interface for mapping visual observations and language instructions to robot actions, but dexterous hands remain difficult to include because multi-finger actions are high-dimensional, coupled, and sensitive to contact timing. We present an end-to-end dexterous VLA pipeline that predicts arm and hand actions together without a separate hand controller. Hand Synergy Latent compresses high-dimensional hand joint commands into a compact latent action, while Hand Intent predicts desired hand-pose progress and selects the decoded hand candidate that best matches the task pose from the VLA action chunk. Across grasp, push, and hook- pull tasks, the compact representation reaches the same convergence criterion with 31.8% fewer optimization steps than direct 16-dimensional hand-action prediction. Intent-guided execution further reduces hand-transition timing error by 78.7–88.2% and pose-progress error by 42.9–55.6% compared with VLA-only execution.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat8_06"
    },
    {
      "id": "WeAT9.1",
      "paperId": "197",
      "title": "Geodesic-Normal Information Fusion for Heterogeneous Track-To-Track Fusion (I)",
      "session": "WeAT9",
      "date": "2026-10-28",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "463789",
          "name": "Lee, Jae Hong",
          "affiliation": "Seoul National University"
        },
        {
          "id": "257109",
          "name": "Park, Chan Gook",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing",
        "Control Theory and Applications"
      ],
      "abstract": "Heterogeneous track-to-track fusion (T2TF) must combine local tracks represented in different state spaces, such as active Cartesian tracks and passive azimuth/elevation tracks. Information matrix fusion (IMF) reduces repeated information counting in T2TF with memory by fusing the information increment of each local update. A passive angular increment, however, represents line-of-sight uncertainty whose natural support is the unit sphere rather than the azimuth/elevation plane. This paper presents geodesic-normal information fusion (GN-IMF), which reparameterizes the passive predicted/posterior angular Gaussian pair as a geodesic-normal density pair on S2. The posterior-to-prior density ratio defines a directional information factor that is pulled back through the passive line-of-sight map and locally approximated as a Cartesian-compatible Gaussian information increment for the standard IMF update. In 500-run Monte Carlo simulations, GN-IMF reduces nominal position RMSE from 41.62 m to 37.51 m relative to conventional IMF and reduces mean 6-D ANEES from 10.39 to 5.27. Additional passive-noise and high-elevation evaluations show that the improvements in accuracy and consistency persist under the tested conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat9_01"
    },
    {
      "id": "WeAT9.2",
      "paperId": "252",
      "title": "Learning Road Centerline Representations from Images for SD-Map Localization (I)",
      "session": "WeAT9",
      "date": "2026-10-28",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "470614",
          "name": "Yun, Taehun",
          "affiliation": "Kangwon National University, Spatial Intelligence Laboratory"
        },
        {
          "id": "470628",
          "name": "Lee, Youngwoo",
          "affiliation": "Kangwon National University"
        },
        {
          "id": "349470",
          "name": "Lee, Hanyeol",
          "affiliation": "Seoul National University"
        },
        {
          "id": "308071",
          "name": "Choe, Yeongkwon",
          "affiliation": "Kangwon National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Reliable vehicle localization is essential for autonomous driving, particularly in environments where GNSS signals are unreliable. In such environments, map-based localization improves robustness by associating sensor observations with prior road geometry. In particular, Standard-Definition (SD) maps such as OpenStreetMap (OSM) provide lightweight road information, but their limited geometric precision makes robust localization challenging. Existing image-based SD-map localization methods primarily rely on sparse structural cues or rasterized map features and often suffer from degraded performance in feature-poor environments such as highways and rural roads. In contrast, road centerlines provide road-level geometric information that can be directly associated with SD-map road networks. In this study, we propose a monocular-camera-based road centerline representation framework for SD-map-based localization. The proposed method predicts road centerline representations in the Bird’s-Eye-View (BEV) domain using a transformer-based set prediction network with feature-guided dynamic queries, representing each road centerline as a compact cubic Bezier curve. Experimental results on a dataset show that the proposed method improves the F1-score from 53.0% to 71.3% and reduces the Chamfer Distance from 1.81,m to 1.42,m compared with a DETR-style baseline. Furthermore, particle-filter-based localization experiments demonstrate that the predicted road centerlines provide effective observations for SD-map-based localization.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat9_02"
    },
    {
      "id": "WeAT9.3",
      "paperId": "538",
      "title": "PI-PPO: Physics-Informed Proximal Policy Optimization for Safe Lidar-Based Path Planning (I)",
      "session": "WeAT9",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "487135",
          "name": "Choi, Ji Hun",
          "affiliation": "Sejong University"
        },
        {
          "id": "466619",
          "name": "Kang, Chang Ho",
          "affiliation": "Sejong University"
        },
        {
          "id": "540575",
          "name": "Choi, Yoon Seo",
          "affiliation": "Sejong University"
        },
        {
          "id": "383659",
          "name": "Kim, Sun Young",
          "affiliation": "Kunsan National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Model-free deep reinforcement learning can learn sensor-based navigation policies without a map, but it is physics-agnostic: exploration causes thousands of collisions, sample efficiency is poor, and learned paths exhibit excessive turning. We propose PI-PPO, a physics-informed extension of Proximal Policy Optimization that injects prior physical knowledge through four complementary modules: (i) a PINN-style auxiliary loss that penalizes the residual of the contact-inclusive equation of motion, with dense collision labels derived for every action from lidar ray geometry; (ii) a separable Hamiltonian network H = T(p) + V(q) trained with a minimum-control-effort prior, whose learned potential V is fed back through policy-invariant potential-based reward shaping; (iii) a nonholonomic action constraint with a curvature penalty reflecting unicycle kinematics; and (iv) a discrete-time control barrier function safety filter defined directly in lidar sensor space. Across three randomized mazes of increasing difficulty and five seeds per variant, PI-PPO eliminates training collisions entirely (versus ~2,500 for PPO), raises the success rate from 53% to 100%—on the hardest maze vanilla PPO never succeeds while PI-PPO always does—and reduces final-path turns from 10.0 to 6.0 while staying within 2.6% of the A* optimal length, at 1.8× wall-clock cost. Ablations isolate the contribution of each module—attributing most of the headline gains to the nonholonomic constraint and CBF shield, while the PINN and Hamiltonian modules mainly add an interpretable, data-driven dynamics model in this discrete setting—and expose a practical lesson: the conservativeness of the safety filter directly governs whether learning remains possible.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat9_03"
    },
    {
      "id": "WeAT9.4",
      "paperId": "46",
      "title": "Wasserstein Distributionally Robust EKF Design under Nonstationary Measurement Errors and Its Application to GNSS/INS Integrated Navigation (I)",
      "session": "WeAT9",
      "date": "2026-10-28",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "485329",
          "name": "Kim, Minhwan",
          "affiliation": "Konkuk University"
        },
        {
          "id": "187845",
          "name": "Sung, Sangkyung",
          "affiliation": "Konkuk"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This extended abstract summarizes a Wasserstein distributionally robust optimization-based extended Kalman filter (DRO-EKF) for robust GNSS/INS integrated navigation under nonstationary measurement errors. Conventional EKF-type filters rely on a nominal measurement-noise covariance and can therefore suffer severe performance degradation when GNSS measurements include outliers, bias, heavy-tailed noise, or spoofing components. The proposed method constructs an empirical distribution from recent measurement residual samples and defines a Wasserstein ambiguity set centered on it. In the measurement update, the residual mean shift is compensated using a mean-centered residual, while residual covariance distortion is reflected through an adaptive covariance update based on Wasserstein shrinkage. Numerical simulations and real flight-test-based GNSS/INS validation show that the proposed filter suppresses both average position error and instantaneous peak error more effectively than EKF, AKF, MCKF, HEKF, and DRKF.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#weat9_04"
    },
    {
      "id": "WeBT1.1",
      "paperId": "9",
      "title": "Inverse Learning-Based Output Feedback Control of Nonlinear Systems with Verifiable Guarantees",
      "session": "WeBT1",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "390979",
          "name": "Jang, Yeongjun",
          "affiliation": "Seoul National University"
        },
        {
          "id": "342620",
          "name": "Chang, Hamin",
          "affiliation": "Purdue University"
        },
        {
          "id": "520888",
          "name": "Park, Heein",
          "affiliation": "Seoul National University"
        },
        {
          "id": "520889",
          "name": "Jang, Hyeonyeong",
          "affiliation": "Seoul National University"
        },
        {
          "id": "268750",
          "name": "Tanaka, Takashi",
          "affiliation": "University of Texas at Austin"
        },
        {
          "id": "196865",
          "name": "Shim, Hyungbo",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "In this paper, we present a data-driven output feedback controller for nonlinear systems that achieves practical output regulation, using noise-free input/output measurement data. The proposed method has two main components: (i) an inverse model of the system identified via kernel methods, which is a mapping from the current state and a desired output to the corresponding control input; and (ii) a data-driven reference selection framework that actively chooses a suitable reference output trajectory from the dataset which has been used for the identification. We establish a verifiable sufficient condition on the dataset under which the proposed controller guarantees practical output regulation. Numerical simulations demonstrate the effectiveness of the proposed controller, while additional evaluations under output measurement noise provide empirical evidence of its robustness.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt1_01"
    },
    {
      "id": "WeBT1.2",
      "paperId": "237",
      "title": "Elliptic Curve-Based Verifiable Computation for Multi-Agent Systems with Application to Consensus",
      "session": "WeBT1",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526145",
          "name": "Lee, Seungbeom",
          "affiliation": "Seoul National University"
        },
        {
          "id": "198306",
          "name": "Kim, Junsoo",
          "affiliation": "Seoul National University of Science and Technology"
        },
        {
          "id": "196865",
          "name": "Shim, Hyungbo",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "Networked multi-agent systems are vulnerable to integrity attacks because local state corruption and forged information can propagate through the communication graph. To address this issue, we propose a verifiable consensus framework that mitigates vulnerabilities in networked multi-agent systems. By using a distributed protocol that securely aggregates proofs from individual agents and employing elliptic-curve cryptography, we reduce computational and communication burden. In addition, by using Pedersen commitment, we enhance privacy protection by preventing possible data leakage. Finally, we empirically demonstrate the efficacy of our method through a distributed simulation of a consensus problem.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt1_02"
    },
    {
      "id": "WeBT1.3",
      "paperId": "353",
      "title": "Soft Actor-Critic Differentiable Nonlinear Model Predictive Control for Autonomous Racing",
      "session": "WeBT1",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "463828",
          "name": "Park, Sung jun",
          "affiliation": "Inha University"
        },
        {
          "id": "334540",
          "name": "Kim, Kwangki",
          "affiliation": "Inha University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes a hierarchical framework integrating soft actor-critic reinforcement learning with differentiable nonlinear model predictive control (Diff-NMPC) for path tracking in rear wheel steering autonomous racing. In the proposed framework, the stage and terminal cost weights of the NMPC problem are treated as learnable parameters and are optimized end-to-end using analytical sensitivities obtained from the optimal control solver. Simulation results show that the analytical sensitivity closely matches finite-difference estimates, with absolute errors on the order of 10e−6 to 10e−8. With a prediction horizon of 40, the validation lap time reached 5.08 s, corresponding to a 15.9% reduction relative to the case with a horizon of 25 (6.04 s) and a 3.8% improvement over conventional NMPC with fixed cost weights evaluated at a horizon of 40. On the tested desktop platform, the average total computation time remained below 3.7 ms, which is compatible with the 20 ms sampling time used in the simulations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt1_03"
    },
    {
      "id": "WeBT1.4",
      "paperId": "379",
      "title": "Dual LMI-Based Absolute Stability Analysis for Feedback Systems with Repeated Slope-Restricted and Idempotent Nonlinearities",
      "session": "WeBT1",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527662",
          "name": "Gyotoku, Hibiki",
          "affiliation": "Kyushu University"
        },
        {
          "id": "527922",
          "name": "Ebihara, Yoshio",
          "affiliation": "Kyoto University"
        },
        {
          "id": "527982",
          "name": "Yuno, Tsuyoshi",
          "affiliation": "Okayama University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper investigates the absolute stability of feedback systems with slope-restricted, idempotent and repeated nonlinearities. It is well known that, within the framework of integral quadratic constraints (IQCs), suitable multipliers can be employed to derive (primal) linear matrix inequality (LMI) conditions for ensuring the absolute stability. However, a limitation of this approach is that no conclusion on the absolute stability can be obtained if the corresponding primal LMI is (numerically) infeasible. Recent studies have shown that new insights can be obtained by focusing on the dual formulation of the primal LMI. Motivated by these developments, we address the analysis based on dual LMIs. As the main results, conditions are derived for constructing destabilizing nonlinear operators and extracting non-trivial equilibrium points, thereby certifying that the considered systems are not absolutely stable. Numerical examples are provided to demonstrate the validity of the proposed results and to compare them with existing dual-LMI-based approaches.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt1_04"
    },
    {
      "id": "WeBT1.5",
      "paperId": "457",
      "title": "A MATLAB Software for Index Reduction of Linear DAEs Using Mixed Matrices",
      "session": "WeBT1",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527709",
          "name": "Kuriyama, Hayato",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "320479",
          "name": "Koga, Masanobu",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "Many existing software packages, including MATLAB, perform index reduction for DAEs with an index greater than one using the Pantelides method. However, the Pantelides method may fail because numerical cancellation can occur during the reduction process. Iwata et al. proposed a method for constructing DAEs to which the Pantelides method can be successfully applied. In this study, we implement a transformation algorithm based on mixed matrices using MATLAB's Symbolic Math Toolbox and develop software that converts general linear DAEs into forms amenable to the Pantelides method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt1_05"
    },
    {
      "id": "WeBT1.6",
      "paperId": "476",
      "title": "Stability and L_2-Gain Analysis of Periodic Piecewise Time-Varying Systems Based on an Improved Matrix Polynomial Condition",
      "session": "WeBT1",
      "date": "2026-10-28",
      "start": "16:55",
      "end": "17:10",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528314",
          "name": "Yang, Wei",
          "affiliation": "University of Jinan"
        },
        {
          "id": "528408",
          "name": "Jiang, Zhiwen",
          "affiliation": "University of Jinan"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper investigates the stability and L_2-gain performance of periodic piecewise systems with time-varying subsystems. Under a piecewise continuous time-varying Lyapunov function framework, an augmented linear matrix inequality is constructed by introducing a positive definite matrix and an auxiliary matrix satisfying a positivity constraint to address the negative definiteness verification of a matrix polynomial arising from the Lyapunov derivative. Compared with existing methods, a less conservative matrix polynomial negativity criterion is proposed. Based on this criterion, a sufficient condition for exponential stability is established, and an L_2-gain performance criterion is derived. All conditions are expressed directly in terms of linear matrix inequalities, and a numerical example is provided to demonstrate the effectiveness of the proposed method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt1_06"
    },
    {
      "id": "WeBT2.1",
      "paperId": "369",
      "title": "Residual Reinforcement Learning-Based Hybrid Control for a Longitudinally Extended Two-Wheeled Inverted Pendulum Robot (I)",
      "session": "WeBT2",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "300524",
          "name": "Kim, David",
          "affiliation": "Myongji University"
        },
        {
          "id": "300525",
          "name": "Hur, Jeongsu",
          "affiliation": "Myongji University"
        },
        {
          "id": "113230",
          "name": "Choi, Dongil",
          "affiliation": "Myongji University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "This paper proposes a residual reinforcement learning-based hybrid control architecture for the Longitudinally Extended Two-Wheeled Inverted Pendulum Robot (LE-TWIPR) equipped with a sliding mechanism. Although the LE-TWIPR provides a large space for payload placement, payload-induced longitudinal center-of-mass (CoM) shifts make it challenging to simultaneously achieve balance and velocity tracking. Model-based control provides physically interpretable nominal behavior but degrades as unmodeled factors become more pronounced, while pure reinforcement learning (RL) provides high adaptability but offers limited physical interpretability, as the contributions of individual actuators are embedded implicitly within a single learned policy. The proposed architecture uses the slider input for CoM compensation by decomposing it into a model-derived slider reference obtained from the quasi-static equilibrium condition and a learned residual, while generating the wheel torques directly through the RL policy. The policy is trained using PPO with an asymmetric actor-critic structure in Isaac Lab. Simulation results show that, compared with pure RL, the proposed architecture reduces velocity tracking error (RMSE) by up to 25%, overshoot by 58%, and slider position variation by 26%, while exhibiting faster and more consistent recovery under unseen push disturbances. The slider command decomposition shows that the model-derived slider reference represents the nominal slider behavior, while the residual term provides dynamic correction during velocity transitions. This decomposition improves interpretability and contributes to improved tracking performance.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt2_01"
    },
    {
      "id": "WeBT2.2",
      "paperId": "370",
      "title": "Gaussian Mixture Model-Based Indirect Joint Optimization of Robot Design and Control (I)",
      "session": "WeBT2",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "487628",
          "name": "Byun, Woohyun",
          "affiliation": "Chung-Ang University"
        },
        {
          "id": "487631",
          "name": "Lim, Sungwon",
          "affiliation": "Chung-Ang University"
        },
        {
          "id": "240412",
          "name": "Nam, Woochul",
          "affiliation": "Chung-Ang University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This study identifies three failure modes of Gaussian mixture model (GMM)-based indirect joint optimization for robot morphology-control co-design, namely component collapse, premature convergence, and initialization sensitivity, and proposes a failure-aware framework (F-JO) that resolves them through four targeted elements. On the Hopper and Walker2d benchmarks, F-JO improves the final return by approximately 14% and 35% over the conventional formulation (C-JO), respectively, and is the only co-design method that retains a 100% success rate on both benchmarks",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt2_02"
    },
    {
      "id": "WeBT2.3",
      "paperId": "396",
      "title": "Intent-Aware Leader-Following Framework for Combat Support UGVs Using Anticipatory Observation-Support Cost (I)",
      "session": "WeBT2",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "349960",
          "name": "Kwak, Jeonghoon",
          "affiliation": "Advanced Institute of Convergence Technology"
        },
        {
          "id": "528032",
          "name": "Kim, Myeong-Jun",
          "affiliation": "Cheongju University"
        },
        {
          "id": "488177",
          "name": "Shin, Heeseok",
          "affiliation": "Sejong University"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Autonomous Vehicle Systems",
        "Robotic Applications"
      ],
      "abstract": "Combat support unmanned ground vehicles (UGVs) should follow an operator while maintaining a support position that enables continuous observation and immediate assistance. However, conventional following methods based on the operator’s current position or a fixed following distance may cause unnecessary repositioning or observation loss in obstacle-rich environments. This paper proposes an intent-aware leader-following framework using an anticipatory observation-support cost. The proposed framework estimates the operator’s short-term motion intent from position, velocity, and moving direction, predicts future observation availability, and generates candidate support positions within the support feasible region. The optimal support position is selected by jointly considering observation continuity, support availability, and movement cost. Repositioning is executed only when future support effectiveness is expected to improve. Simulation results in battlefield-like scenarios show that the proposed method maintains an Observation Loss Ratio of 0.000 in all tested scenarios while achieving the lowest average Repositioning Ratio compared with fixed-distance, current-cost, and prediction-based following methods.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt2_03"
    },
    {
      "id": "WeBT2.4",
      "paperId": "424",
      "title": "Analysis of Spray Process Parameters and Enhancement of Dielectric Breakdown Properties of SWCNT-Based DEA Electrodes for Small Terrestrial Robot Actuation (I)",
      "session": "WeBT2",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "257040",
          "name": "Lee, Doohoe",
          "affiliation": "Ajou University"
        },
        {
          "id": "527762",
          "name": "Kwon, Sunkuk",
          "affiliation": "Ajou University"
        },
        {
          "id": "527792",
          "name": "Choi, Young",
          "affiliation": "Ajou University"
        },
        {
          "id": "132579",
          "name": "Koh, Je-Sung",
          "affiliation": "POSTECH"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Dielectric elastomer actuators (DEAs) are promising for small-scale robots. However, spray-coated single-walled carbon nanotube (SWCNT) electrodes often exhibit sharp surface peaks, inducing localized electric field concentrations and accelerating dielectric breakdown. To address this, we propose improving the surface morphology and breakdown strength of SWCNT electrodes by adjusting the atomization pressure, eliminating post-processing. Higher atomization pressure reduces droplet size, significantly decreasing both average surface roughness and extreme peak heights, thereby enhancing the breakdown strength of multilayer DEA structures. A large-area coating process was established with an atomization pressure of 0.20 MPa, an 80 mm nozzle height, and a 0.02 MPa supply pressure. Using the above process parameters, a multilayer rolled DEA was fabricated and compared with an actuator fabricated at a low atomization pressure. Results showed that the DEA fabricated at the higher atomization pressure withstood higher electric fields (up to 35 V/µm) without early breakdown, exhibiting superior static and dynamic actuation performance. Finally, the actuator was integrated into a small-scale robot leg, generating a periodic stroke of 5.5 mm at 15 Hz. This successfully demonstrates the feasibility of reliable DEA actuation for small terrestrial robots.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt2_04"
    },
    {
      "id": "WeBT2.5",
      "paperId": "437",
      "title": "Design and Simulation of a Shared-Actuation Bevel-Gear Drivetrain for a Ground-Aerial Hybrid Robot (I)",
      "session": "WeBT2",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528156",
          "name": "Chang, Jae Hee",
          "affiliation": "Korea National Defense University"
        },
        {
          "id": "526957",
          "name": "Cha, Dowan",
          "affiliation": "Korea National Defense University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper presents the design and simulation-based evaluation of a compact ground-aerial hybrid robot that combines quadrotor flight with wheel-assisted ground locomotion through a shared-actuation architecture: rather than adding independent wheel-drive actuators, each propulsion motor is reused for ground locomotion by redirecting its output to the wheel axis through a bevel-gear transmission. The platform targets compact indoor mobility, using flight to overcome obstacles or discontinuous terrain and ground travel to reduce energy consumption during surface motion. The bearing-supported bevel-gear drivetrain provides 90-degree power transmission while transferring radial and reaction loads to the bearings and gearbox housing rather than directly to the motor shaft. For a wheel radius of 0.035 m and target ground speeds of 1.0-1.5 m/s, the required wheel speed is about 273-409 rpm, which a 1:3 transmission ratio maps to about 819-1228 rpm at the motor, indicating kinematic compatibility with low-speed ground operation. A motor-load model (rolling resistance, acceleration, wheel and motor torque, and estimated current) and a MATLAB/Simulink ground-mode simulation are developed; preliminary closed-loop results track the commanded velocities, settle at motor speeds consistent with the analytic operating points, and indicate that the dominant torque and current demand occurs during startup transients rather than steady cruise. An integrated Gazebo/PX4/ROS 2 framework is organized to support mode management, flight-control integration, and future higher-fidelity validation. The study thus provides a platform-level design basis for shared-actuation ground-aerial robots; future work includes low-speed ESC bench testing, drivetrain prototyping, ground-contact experiments, and integrated mode-transition validation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt2_05"
    },
    {
      "id": "WeBT3.1",
      "paperId": "294",
      "title": "Unsupervised Latent Local Dynamics Is Impulse Controllable and Stabilizable",
      "session": "WeBT3",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "192973",
          "name": "Chakraborty, Arindam",
          "affiliation": "Indian Institute of Technology Kanpur"
        },
        {
          "id": "526366",
          "name": "C S, Nagadarahas Kumar",
          "affiliation": "SASTRA"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "In this work, we prove that the uncontrollable linearized dynamics can be made impulse controllable and feedback stabilizable by the random projective transformation of a state equation to a differential-algebraic form. The original dynamics in the configuration space and its learned latent representation are shown to be system and feedback equivalent. The resulting differential-algebraic dynamics, symbolic of dynamics on learned latent spaces without labels, is well-defined and controllable at∞—thus characterizing a freely initializable dynamics. These assertions mathematically guarantees that learned latent dynamics of a moving agent — irrespective of the instability of the original dynamics in configuration spaces — are feedback stabilizable. Building on these results in the behavioral framework, we argue that for such a random differential-algebraic equation (RDAE), a unique solution exists for any two arbitrary states and initial conditions if the matrix pencil of the characteristic matrix A and the random multiplier R is row regular. The proposed paradigm sheds new light on the long-standing conundrum regarding augmented controllability in unsupervised learning of latent dynamics compared to joint-space control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt3_01"
    },
    {
      "id": "WeBT3.2",
      "paperId": "273",
      "title": "PAL-NBV: Next-Best-View Planning for Pallet Pose Estimation",
      "session": "WeBT3",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "333605",
          "name": "Hein, Benedikt",
          "affiliation": "University of Luebeck"
        },
        {
          "id": "238787",
          "name": "Schildbach, Georg",
          "affiliation": "University of Luebeck"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Pallet pose estimation from a single viewpoint remains sensitive to occlusion and unfavorable viewpoints. This paper presents Pallet Next-Best-View (PAL-NBV), the first NBV approach designed specifically for pallet pose estimation. PAL-NBV builds an occupancy map from synchronized RGB-D images and selects viewpoints that minimize estimated pallet occlusion, while staying within an empirically determined operating range of a given pallet pose estimator. PAL-NBV consults a large language model if viewpoint generation based on the occupancy map fails. Across 968 simulated warehouse scenarios, PAL-NBV reduces the median translation error from 0.383mathrm{m} to 0.103mathrm{m} and the median rotation error from 2.54^circ to 0.96^circ at the cost of increased path lengths.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt3_02"
    },
    {
      "id": "WeBT3.3",
      "paperId": "275",
      "title": "Stage-Specific Detector Quality Fusion for Camera-Based 3D Multi-Object Tracking",
      "session": "WeBT3",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526223",
          "name": "Oturak, Yigit",
          "affiliation": "Ford Otosan"
        },
        {
          "id": "526224",
          "name": "Hakkoymaz, Cagri",
          "affiliation": "Ford Otosan"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Detector class confidence alone does not provide explicit estimates of localization or velocity reliability, nor does it directly capture tracker-specific temporal stability or detection–track compatibility. We augment BEVDepth and StreamPETR with auxiliary localization- and velocity-quality branches, yielding QBEVDepth and QStreamPETR, and study how these bounded quality proxies can be consumed at different tracker interfaces. QTrack exposes temporal-confidence, association, and output-score interfaces, whereas Original PolyMOT retains its internal tracking decisions and uses detector quality only through its exported tracking score. Tracker-side models and lookups are fitted on 50 of the 150 nuScenes validation scenes, while all primary tracking results are evaluated on the remaining 100 disjoint scenes. With QTrack, detector-specific combined configurations yield AMOTA point-estimate changes of +0.0032 for QBEVDepth and +0.0033 for QStreamPETR. With PolyMOT, output-score quality conditioning produces changes of +0.0043 and +0.0053, respectively. The auxiliary detector-quality branches add a small detector-side computational footprint. These results support tracker-interface-aware quality consumption rather than a single universal insertion rule.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt3_03"
    },
    {
      "id": "WeBT3.4",
      "paperId": "339",
      "title": "Robust Hollow Gate Detection Using Monocular RGB Camera for Visual Servoing",
      "session": "WeBT3",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527673",
          "name": "Liu, Yingying",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "527674",
          "name": "Zhan, Zhenrong",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "370924",
          "name": "Tan, Yan Rui",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "159929",
          "name": "Huang, Sunan",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "107446",
          "name": "Teo, Rodney",
          "affiliation": "NUS"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "This study addresses the problem of robust gate perception and autonomous gate traversal for unmanned aerial vehicles (UAVs) operating in GPS-denied environments. The objective is to develop a practical, perception-driven flight pipeline that enables a UAV to detect a target gate, align with it, and execute traversal using visual servoing. To this end, we propose a robust hollow gate detection algorithm (HGDA) that directly exploits the structural characteristics of the gate. The method formulates gate detection as the extraction of a geometrically consistent quadrilateral from color and contour cues in the image. The resulting image-plane features are used as inputs to a moment-based visual servoing controller for closed-loop flight control. The proposed system is validated through real-world experiments, demonstrating reliable gate detection and successful autonomous traversal in GPS-denied environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt3_04"
    },
    {
      "id": "WeBT3.5",
      "paperId": "607",
      "title": "Vision Based Navigation Using Deep Reinforcement Learning for Agile Bio-Robotic Systems",
      "session": "WeBT3",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "520629",
          "name": "Dewapura, Praveena",
          "affiliation": "School of Engineering & Technology, UNSW"
        },
        {
          "id": "124297",
          "name": "Garratt, Matthew",
          "affiliation": "UNSW Australia, Canberra"
        },
        {
          "id": "105625",
          "name": "Srinivasan, Mandyam",
          "affiliation": "The University of Queensland"
        },
        {
          "id": "327761",
          "name": "Perera, Asanka",
          "affiliation": "University of Southern Queensland"
        },
        {
          "id": "314402",
          "name": "Ravi, Sridhar",
          "affiliation": "University of New South Wales"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Flying insects navigate cluttered three-dimensional environments using optic flow, achieving robust obstacle avoidance without range sensors, depth maps, or explicit metric maps. This biological strategy offers a computationally lightweight alternative to the multi-sensor fusion pipelines that dominate engineered autonomous navigation, and is particularly attractive for size, weight, and power constrained aerial vehicles. In this work, we formulate bio-inspired obstacle avoidance as a continuous-control deep reinforcement learning problem in which a simulated model perceives its environment through an optic flow field and traverses an obstacle-laden 3D environment collision-free to an end goal. A convolutional feature extractor maps the spherical optic flow field to continuous action commands. We conduct a controlled, like-for-like comparison between an on-policy method, proximal policy optimization, and an off-policy method, soft actor-critic, under an identical environment, observation space, network architecture, and collision-penalty structure. Both policies are evaluated across different obstacle densities using safety and efficiency aware metrics. The results characterize the trade-offs between sample efficiency, stability, and trajectory quality for obstacle avoidance based purely on optic flow, and provide practical guidance on algorithm selection for bio-inspired aerial navigation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt3_05"
    },
    {
      "id": "WeBT3.6",
      "paperId": "542",
      "title": "Training-Free Suction Grasp Detection for Deformed Aseptic Cartons Using Vision-Language Models and Geometric Surface Scoring",
      "session": "WeBT3",
      "date": "2026-10-28",
      "start": "16:55",
      "end": "17:10",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "486603",
          "name": "Maletic, Marin",
          "affiliation": "University of Zagreb Faculty of Electrical Engineering and Computing"
        },
        {
          "id": "138073",
          "name": "Vasiljevic, Goran",
          "affiliation": "Faculty of Electrical Engineering and Computing, Zagreb, Croatia"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "Robotic sorting of recyclable waste is challenging due to the deformable and geometrically inconsistent nature of target objects. We present a training-free suction grasping system for sorting deformed aseptic beverage cartons, decoupling target identification from grasp-point selection. An open-vocabulary vision-language model detects cartons from a text prompt, SAM2 refines each detection into an instance mask, and a geometric scoring method selects the suction point by combining surface flatness with normal alignment. Three geometric methods are compared: k-nearest-neighbour PCA, Sobel cross-product, and RANSAC plane fitting. Evaluated on a real robot across three deformation levels and 35 cluttered scenes, single-object grasp success reaches 88.2% and end-to-end retrieval in clutter is 72.6%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt3_06"
    },
    {
      "id": "WeBT4.1",
      "paperId": "546",
      "title": "Efficient Time-Optimal Trajectory Generation for Quadrotors Using an Augmented Triple-Integrator",
      "session": "WeBT4",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "271220",
          "name": "Chipade, Vishnu S.",
          "affiliation": "Technology Innovation Institute"
        },
        {
          "id": "268767",
          "name": "Bertoncelli, Filippo",
          "affiliation": "Technology Innovation Institute"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Deployment of quadrotor UAVs in time-critical missions requires time-optimal trajectory generation. While existing trajectory generation approaches are promising, they are either computationally expensive or rely on simplified motion models that inadequately capture vehicle dynamics. In this paper, we propose time-optimal trajectory generation for quadrotors using a jerk-controlled triple integrator motion model that captures key aerodynamic effects and finite attitude dynamics while maintaining computational tractability. We formulate the corresponding time-optimal control problem and derive semi-analytical solutions for a class of scenarios, enabling efficient trajectory computation. For the general case, the resulting time-optimal control problem is solved numerically using a direct shooting approach. We evaluate the proposed approach against existing trajectory generation methods in terms of trajectory tracking performance and computational time, demonstrating that it generates reasonable trajectories while requiring significantly less computation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt4_01"
    },
    {
      "id": "WeBT4.2",
      "paperId": "30",
      "title": "Context-Conditioned Risk-Gated Stimulus-MPC for Socially Acceptable Venue Roaming",
      "session": "WeBT4",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523967",
          "name": "Peng, Yan",
          "affiliation": "National University of Singapore"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Human-Robot Interaction",
        "Control Theory and Applications"
      ],
      "abstract": "This paper studies socially acceptable robot roaming in indoor public venues such as museums and galleries. The robot must maintain human safety and semantic social compliance while continuing to visit different venue regions. We present a risk-gated, uncertainty-aware stimulus-MPC planner that combines stimulus-field reference tracking, effective-distance social activation, context-conditioned viewer/group/flow costs, and anchor-based coverage scheduling. The method is evaluated in a 3D museum benchmark over 20 random seeds and 540 planning steps against reactive roaming, social-force roaming, DWA roaming, deterministic stimulus control, ORCA-style roaming, and an official RVO2/ORCA baseline. Results show comparable venue coverage with substantially improved minimum human clearance, minimum time-to-collision, collision rate, motion smoothness, and semantic group/flow disturbance. Component ablations further isolate the roles of uncertainty inflation, risk gating, and semantic social costs. External replay checks on NavWareSet and SiT provide additional support beyond procedurally generated pedestrians. The results indicate that local reciprocal collision avoidance alone is insufficient for socially acceptable venue roaming, while risk-gated uncertainty-aware stimuli provide a practical control structure for public indoor navigation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt4_02"
    },
    {
      "id": "WeBT4.3",
      "paperId": "292",
      "title": "Bio-Inspired Target Tracking Via Deep Reinforcement Learning",
      "session": "WeBT4",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "520629",
          "name": "Dewapura, Praveena",
          "affiliation": "School of Engineering & Technology, UNSW"
        },
        {
          "id": "124297",
          "name": "Garratt, Matthew",
          "affiliation": "UNSW Australia, Canberra"
        },
        {
          "id": "327761",
          "name": "Perera, Asanka",
          "affiliation": "University of Southern Queensland"
        },
        {
          "id": "105625",
          "name": "Srinivasan, Mandyam",
          "affiliation": "The University of Queensland"
        },
        {
          "id": "314402",
          "name": "Ravi, Sridhar",
          "affiliation": "University of New South Wales"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Dragonflies intercept airborne prey using only visual information with no range sensor, no GPS, and no explicit knowledge of the target's position or closing velocity. Their pursuit strategy closely resembles a proportional navigation (PN) guidance law widely used in engineered interception systems. However, classical PN implementations require full state information, explicit range to the target, relative position vectors, closing velocity and a fixed navigation constant which governs how sharply the pursuer turns in response to target angular drift. We present a biologically inspired deep reinforcement learning (DRL) framework that recovers the guidance-relevant quantities: line-of-sight (LOS) direction and LOS rotation rate, purely from {optic flow}, eliminating the need for range sensing. Our system integrates three components: bio-inspired target detection from background flow, an optic-flow-based pipeline that recovers the LOS direction and its angular rate without any range measurement, and a DRL agent that {exhibits} an {emergent}, adaptive state-dependent navigation constant N(mathbf{s}). We evaluate the framework against a classical 3D true proportional navigation controller operating with full state information, a pure pursuit baseline, and a dragonfly foveation model. Results demonstrate that the DRL agent achieves improved tracking and interception performance using optic flow, and that the {emergent} navigation constants align with values measured in predatory insects. This work supports the hypothesis that insect pursuit can be implemented with image-plane information combined with a self-motion estimate, providing a practical, optic-flow{-based} tracking and interception controller for resource-constrained autonomous platforms.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt4_03"
    },
    {
      "id": "WeBT4.4",
      "paperId": "303",
      "title": "Field-Of-View Aware Obstacle-Memory MPPI for Vision-Based Drone Avoidance under Perception Dropout",
      "session": "WeBT4",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526805",
          "name": "Nagano, Riku",
          "affiliation": "Hiroshima University"
        },
        {
          "id": "278828",
          "name": "Nagahara, Masaaki",
          "affiliation": "Hiroshima University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Vision",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper presents a controller-level obstacle-avoidance framework for a small drone with a limited forward-camera field of view. An obstacle may disappear from the image after a lateral maneuver, causing a memoryless controller to remove the obstacle cost near the closest encounter. The proposed Model Predictive Path Integral (MPPI) layer retains a short-term obstacle belief with confidence decay and uncertainty growth, uses uncertainty- and delay-inflated clearance, and optionally controls an independently actuated camera yaw toward the most risky memorized obstacle. A two-dimensional software-in-the-loop (SIL) simulator compares the method with memoryless, fixed-inflation, and last-observation-hold baselines under simulated position noise, dropout, and delay. Each controller--condition pair is evaluated over 100 random seeds; success confidence intervals, collision and timeout rates, and clearance variability are reported. The last-observation-hold baseline is competitive, while the full gaze-memory controller obtains 96--98% success and no collisions in the tested setting. These results constitute controller-level validation with simulated world-coordinate measurements and persistent obstacle identities, not validation of an image-based perception pipeline or physical flight.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt4_04"
    },
    {
      "id": "WeBT4.5",
      "paperId": "543",
      "title": "SPIN: Sketch-Map-Based Place Inference Using Signs for Long-Horizon Robot Navigation",
      "session": "WeBT4",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528612",
          "name": "Yang, Jiyun",
          "affiliation": "KAIST"
        },
        {
          "id": "386912",
          "name": "Kim, Jeewon",
          "affiliation": "School of Electrical Engineering, KAIST"
        },
        {
          "id": "217811",
          "name": "Chung, Dongha",
          "affiliation": "URobotics"
        },
        {
          "id": "274099",
          "name": "Yu, Byeongho",
          "affiliation": "URobotics Corp"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "Reliable place inference is important for long-horizon navigation in large-scale environments where precise metric maps are costly to build and maintain. Humans use simplified navigational cues, such as sketch maps, place signs, and directional signs, to infer their location, but robots cannot directly rely on these cues because sign observations may be noisy, missing, or ambiguous and sketch maps may distort distance, scale, and direction. These limitations make independent local matching unreliable and motivate sequential reasoning over accumulated evidence. We propose SPIN, an offline graph-constrained sequential place inference framework. SPIN constructs a semantic observation sequence, generates candidate places on a sketch-map graph, and formulates place inference as minimum-cost sequence estimation over candidate places. Candidate sequences are evaluated using place-name costs and transition costs from sketch-map topology, directional-sign consistency, and alignment-aware sign-position consistency. Since sign-position consistency requires sketch-to-observation alignment, SPIN uses two-stage inference: the first stage estimates an initial place sequence and alignment from reliable place correspondences, and the second refines the sequence with alignment-aware costs. Skip transitions bypass unreliable observations and reduce false-positive inclusion. Experiments in the Namsan hiking-trail environment show that SPIN infers observation-consistent place sequences under noisy semantic observations and simplified sketch-map priors.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt4_05"
    },
    {
      "id": "WeBT5.1",
      "paperId": "241",
      "title": "Impedance Learning for Contact-Rich Robotic Tasks Via Diffusion Policy (I)",
      "session": "WeBT5",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "412740",
          "name": "Lee, Hae Seong",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "412742",
          "name": "Hong, Hye Seung",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "405728",
          "name": "Kim, KyungSoo",
          "affiliation": "POSTECH"
        },
        {
          "id": "334373",
          "name": "Kwon, Wookyong",
          "affiliation": "ETRI"
        },
        {
          "id": "200780",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Control Theory and Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Learning-based variable impedance control (VIC) has gained increasing attention as a promising approach for achieving adaptive compliance in contact-rich manipulation. Meanwhile, diffusion policies have recently attracted attention in robotic imitation learning, but their use in impedance control remains largely unexplored. In this paper, we propose a diffusion policy-based framework for learning VIC from expert demonstrations. Unlike conventional learning-based VIC methods that often rely on deterministic policies or reinforcement learning-based optimization, the proposed method formulates VIC as a conditional sequence generation problem. Experiments on a peg-in-hole task are conducted across different difficulty levels and compared with baseline methods. The results show that the proposed method achieves more reliable performance across varying task difficulties. In addition, the learned gain profiles indicate that the diffusion policy successfully captures phase-dependent impedance modulation consistent with expert demonstrations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt5_01"
    },
    {
      "id": "WeBT5.2",
      "paperId": "253",
      "title": "Multi-Mode Controller Design for Leader–Following Consensus of Markov Jump Multi-Agent Systems Subject to Random DoS Attacks (I)",
      "session": "WeBT5",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "412742",
          "name": "Hong, Hye Seung",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "412740",
          "name": "Lee, Hae Seong",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "200780",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper studies a multi-mode approach to solve the leader-following consensus problem of Multi-Agent Systems (MASs) under random Denial-of-Service (DoS) attacks. MASs rely heavily on communication networks, making them susceptible to cyber-attacks that can impair information exchange and system performance. To address this problem, this paper proposes a novel multi-mode-based approach and introduces a general-transition probability Markov model to handle random DoS attacks, which are more complex than conventional ones. Furthermore, a new concept, the Leader-Follower Graph-Informed Gain Matrix (LFGIGM), is proposed to enhance the multi-mode approach. The proposed approach is demonstrated its effectiveness through a numerical example.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt5_02"
    },
    {
      "id": "WeBT5.3",
      "paperId": "445",
      "title": "Design of Supervisory Control for Electric Chiller and Air Handling Unit in Building Considering Energy Saving and Thermal Comfort (I)",
      "session": "WeBT5",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526209",
          "name": "Chiangcharoen, Pattarapol",
          "affiliation": "Chulalongkorn University"
        },
        {
          "id": "159494",
          "name": "Banjerdpongchai, David",
          "affiliation": "Chulalongkorn University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "Air-conditioning systems account for a major share of electricity consumption in large buildings. This paper proposes a supervisory control (SC) framework for determining the optimal reference temperature of both chilled-water supply and floor-level zones in a multi-floor cooling system. In the previous study, the heat-transfer behavior of the air handling unit was approximated using Chen’s approximation. On the other hand, this study employs a dynamic model of air handling units to obtain a more accurate physical model. The SC design problem is formulated as a quadratic programming problem that minimizes a weighted combination of normalized Total Operating Cost (TOC) and Thermal Comfort Cost (TCC) under operating limits and comfort constraints. Historical ambient-temperature and cooling-load data are used as disturbances, while floor-level cooling load profile is considered to reflect different thermal conditions among floors. Numerical simulations for a six-floor library building show that the proposed SC method increases the chilled-water supply temperature from the fixed value of 8∘C to approximately 9-13.3∘C. Compared with the fixed-reference strategy, the proposed method reduces the daily-equivalent TOC by 14.02% and the TCC by 63.3%. The proposed SC with combined chiller and AHU dynamic model provides a more realistic setpoint selection with the achievable energy-saving potential and maintaining the thermal comfort of the occupants.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt5_03"
    },
    {
      "id": "WeBT5.4",
      "paperId": "504",
      "title": "Supervisory Reinforcement Learning Control of HVAC System in Building with Consideration of Thermal Comfort and Energy Efficiency (I)",
      "session": "WeBT5",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528536",
          "name": "Luengniyomkul, Krittipong",
          "affiliation": "Chulalongkorn University"
        },
        {
          "id": "159494",
          "name": "Banjerdpongchai, David",
          "affiliation": "Chulalongkorn University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "Air conditioning systems are the largest energy consumers in commercial buildings, particularly in Thailand’s hot and humid climate. Efficient HVAC control that balances energy savings with occupant thermal comfort is therefore of significant practical importance. This project presents a two-layer HVAC controller comprising a Supervisory Control (SC) layer, which employs constrained optimization to determine optimal temperature and humidity setpoints by minimizing total operating cost and thermal comfort cost, and a Reinforcement Learning (RL) layer based on the Proximal Policy Optimization with Lagrangian (PPO-Lagrangian) algorithm to design a tracking controller that satisfies thermal comfort and output bound constraints formulated as a Constrained Markov Decision Process (CMDP). The proposed controller was evaluated on real building data under three Coefficient of Performance values – COP = 4,5,6 – representing nominal and off-nominal operating conditions. Results show that the PPO-Lagrangian controller achieves significantly better humidity ratio tracking than Model Predictive Control (MPC), with RMSE up to five times lower, while maintaining comparable total operating cost. The controller also demonstrates robust adaptability under plant parametric uncertainty.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt5_04"
    },
    {
      "id": "WeBT5.5",
      "paperId": "585",
      "title": "Less Conservative Synchronization Criteria for Sampled-Data Delayed Neural Networks Using Augmented Error Information (I)",
      "session": "WeBT5",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "409130",
          "name": "Moon, Seongrok",
          "affiliation": "Postech"
        },
        {
          "id": "409257",
          "name": "Park, Yongbeom",
          "affiliation": "POSTECH"
        },
        {
          "id": "408132",
          "name": "Kim, Yelim",
          "affiliation": "Postech"
        },
        {
          "id": "536628",
          "name": "Jeong, Yoonbong",
          "affiliation": "Pohang University of Science of Technology"
        },
        {
          "id": "200780",
          "name": "Park, Poogyeon",
          "affiliation": "POSTECH"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper investigates the sampled-data synchronization problem for delayed neural networks subject to communication delays. To reduce the conservatism of existing synchronization criteria based on semi-looped functionals, an augmented-state semi-looped functional is developed. In contrast to conventional approaches that utilize only the derivative information of synchronization errors in integral terms, the proposed method incorporates both the synchronization error and its derivative into an augmented-state framework. By exploiting the relationship between the state and state-derivative information, additional characteristics of the synchronization error dynamics can be reflected in the stability analysis. Based on the proposed functional, generalized integral inequalities and free-weighting matrix techniques are employed to derive novel delay-dependent synchronization conditions in the form of linear matrix inequalities. The resulting criterion preserves the main structure of the semi-looped functional approach while providing a tighter estimation of integral terms associated with communication delays and sampled-data effects. Numerical examples are presented to demonstrate the effectiveness of the proposed method. The results show that the proposed criterion admits larger maximum allowable sampling intervals than existing methods, indicating a reduction in conservatism.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt5_05"
    },
    {
      "id": "WeBT6.1",
      "paperId": "601",
      "title": "Towards Applying Automation to Retrofitting Industrial Variable Frequency Drives",
      "session": "WeBT6",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "502466",
          "name": "Shojaeifard, Leyla",
          "affiliation": "University of Helsinki"
        },
        {
          "id": "539222",
          "name": "Bomström, Toni",
          "affiliation": "Unaffiliated"
        },
        {
          "id": "522574",
          "name": "Kilamo, Terhi",
          "affiliation": "Tampere University"
        },
        {
          "id": "522576",
          "name": "Systä, Kari",
          "affiliation": "Tampere University"
        },
        {
          "id": "522409",
          "name": "Männistö, Tomi",
          "affiliation": "University of Helsinki"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Industrial Applications of Control"
      ],
      "abstract": "Variable Frequency Drives (VFDs) are widely deployed alongside AC electric motors in industrial systems to improve energy efficiency and reduce motor wear and tear, thereby lowering maintenance costs. With proper maintenance and modernization, the drives’ lifespans can extend to decades, but they will eventually need to be replaced. This case study explores the challenges of replacing VFDs in existing industrial installations when backward compatibility is not possible. It also characterizes the retrofitting process and identifies potential for automation. We interviewed 22 employees of a large, internationally operating VFD manufacturer about retrofitting and its challenges. The analysis reveals a four-phase process for retrofitting: drive selection, physical installation, parameter configuration, and system testing. Among these phases, parameter configuration appears to be the most challenging and the most promising target for automation, as it requires deep domain expertise, lacks one-to-one parameter mappings between drive generations, and must meet the strict downtime constraints of industrial operations. Our findings also include considerations of how the VFD use case's application domain can affect the retrofitting process.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt6_01"
    },
    {
      "id": "WeBT6.2",
      "paperId": "173",
      "title": "Implementing an Ion-Trap Micromotion Detector",
      "session": "WeBT6",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525946",
          "name": "Nakasone, Seigen",
          "affiliation": "Okinawa Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper introduces a home-made ion-trap micromotion detector for quantum physics experiments. Based on an FPGA board, it detects the time-differences between the RF synchronized reference clock and the photon emissions, using the accumulated statistics to draw the histogram to indicate the micromotion. The instrument runs online in real-time, its result can be used to guide the compensation and minimizing the micromotion in an ion-trap experiment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt6_02"
    },
    {
      "id": "WeBT6.3",
      "paperId": "639",
      "title": "Swing-Up and Balance Control of Rotary Inverted Pendulum with Disturbance",
      "session": "WeBT6",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "532018",
          "name": "Wen, Chih-Chin",
          "affiliation": "National Kaohsiung University of Science and Technology"
        },
        {
          "id": "532023",
          "name": "Yang, Zih-En",
          "affiliation": "National Kaohsiung University of Science and Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Control Devices and Instruments",
        "Sensors and Signal Processing"
      ],
      "abstract": "This research realizes a controller method for a rotary inverted pendulum system, aiming to achieve swing-up and stabilization control. The system architecture was modeled and simulated using MATLAB/Simulink and validated on the Quanser QUBE-Servo 3 platform. Experimental results demonstrate the effectiveness and feasibility of the strategy even when disturbance exists.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt6_03"
    },
    {
      "id": "WeBT6.4",
      "paperId": "667",
      "title": "Indoor 3D Mapping Using a Compact Quadrotor UAV and Preliminary Evaluation of the Generated Point Cloud",
      "session": "WeBT6",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "532218",
          "name": "Koyama, Shingen",
          "affiliation": "Meisei University"
        },
        {
          "id": "189299",
          "name": "Yamazaki, Yoshiaki",
          "affiliation": "Meisei University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper presents an indoor three-dimensional (3D) mapping system using a compact quadrotor unmanned aerial vehicle (UAV) equipped with a red-green-blue and depth (RGB-D) camera. Intended for disaster-damaged or confined environments where human access is difficult, the system uses Robot Operating System 2 (ROS 2) and Real- Time Appearance-Based Mapping (RTAB-Map) to process color, depth, and inertial data, estimate the UAV trajectory, and generate a colored point cloud. In an indoor experiment, the point cloud was exported in Polygon File Format (PLY) and evaluated for plane flatness, reconstructed plane thickness, spatial dimensions, outlier ratio, point distribution and density, and missing regions. The overall environmental structure was reconstructed, although noticeable dispersion and duplicated surfaces appeared near floors, walls, and object boundaries. Possible causes include UAV motion, attitude changes, sensor vibration, and accumulated pose-estimation error. The results indicate the feasibility of compact-UAV- based indoor mapping and identify the procedures needed for rigorous accuracy assessment. Future work will compare mapped dimensions with reference measurements and evaluate repeatability under different flight conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt6_04"
    },
    {
      "id": "WeBT7.1",
      "paperId": "520",
      "title": "Estimation of Transfer Function from Bode Plot Images Using Multimodal Large Language Model",
      "session": "WeBT7",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528545",
          "name": "Hirano, Shunya",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "320479",
          "name": "Koga, Masanobu",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Toward the realization of control design support using Multimodal Large Language Model (MLLM), this study proposes a method in which the MLLM estimates a transfer function from a Bode plot image. The proposed method consists of two stages. In the first stage, the MLLM extracts frequency-response data points from a Bode plot image. In the second stage, the extracted data are provided to another LLM to estimate a transfer function and to evaluate the errors with respect to the input data. Using the same points extracted in the first stage, we also compare the estimation by MATLAB. The experiments showed that direct estimation from an image achieved high accuracy, whereas the two-stage method further reduced the estimation error for systems with closely spaced poles and zeros, nonminimum-phase systems, and high-order systems. The orders of estimated transfer function by the LLM often matched the true orders, whereas the orders of estimated transfer function by MATLAB tended to be higher than the true orders. Although the two-stage method increases the computational cost, the accuracy could be improved for the transfer functions with complex structures, because the search uses the explicit intermediate representation and the self-evaluation of fitting errors.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt7_01"
    },
    {
      "id": "WeBT7.2",
      "paperId": "576",
      "title": "ORPA: Online Residual Policy Adaptation for Robot Manipulation Control with Human Feedback",
      "session": "WeBT7",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "398333",
          "name": "Muttaqien, Muhammad Angga",
          "affiliation": "National Institute of AIST"
        },
        {
          "id": "252925",
          "name": "Motoda, Tomohiro",
          "affiliation": "National Institute of Advanced Industrial Science and Technology (AIST)"
        },
        {
          "id": "111344",
          "name": "Hanai, Ryo",
          "affiliation": "National Institute of Industrial Science and Technology(AIST)"
        },
        {
          "id": "109212",
          "name": "Domae, Yukiyasu",
          "affiliation": "The National Institute of Advanced Industrial Science and Technology (AIST)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Human-Robot Interaction",
        "Robot Mechanism and Control"
      ],
      "abstract": "Robotic manipulation policies trained via imitation learning, such as Action Chunking with Transformers (ACT), can achieve strong performance under ideal conditions but often remain sensitive to small execution errors and distribution shifts. Correcting these failures typically requires dataset aggregation and full-policy retraining, which is computationally expensive and unsuitable for real-time deployment. In this work, we propose On- line Residual Policy Adaptation (ORPA), a framework that enables immediate, feedback-driven correction of robot actions without modifying the underlying policy parameters. ORPA augments a pretrained control policy with a lightweight, feedback-conditioned module that predicts residual adjustments directly in joint space, allowing the system to adapt its behavior at runtime. We evaluate ORPA on a set of precision-sensitive manipulation tasks using the ALOHA platform, demonstrating improvements in success rate and recovery from small perturbations compared to baseline control policies and rule-based inverse kinematics corrections.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt7_02"
    },
    {
      "id": "WeBT7.3",
      "paperId": "211",
      "title": "An Explainable AI-Based Decision-Support System for Proactive Inventory Risk Management in Smart Manufacturing",
      "session": "WeBT7",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526084",
          "name": "Supong, Thongpan",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang (KMITL)"
        },
        {
          "id": "416139",
          "name": "Ploysuwan, Tuchsanai",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "This paper presents a proactive inventory risk intelligence system for smart manufacturing comprising four layers: (1) MRUPS-F, a knowledge-driven risk scoring engine integrating seven risk dimensions and 25 canonical parameters; (2) a nine-category risk-type taxonomy mapping dimension profiles to operationally distinct patterns; (3) a rule-based action recommendation policy; and (4) a structured explanation layer generating actionable risk alerts. The scoring engine supports staged deployment: zero-shot (AUC = 0.618-0.630, no labels), direction-calibrated (AUC = 0.851), and fully calibrated (AUC = 0.883 +/- 0.004) on 242,075 real backorder records. Because these modes were measured under three different resampling protocols, every reported figure is labelled with the protocol that produced it, and no cross-protocol ratio is claimed. Cross-dataset evaluation reveals weight non-transferability across disruption types, a boundary condition at low parameter coverage where a single-variable heuristic outperforms the composite score, and an ablation in which purchase-order (PO) instability does not contribute on real data. We report these negative results in full, since they delimit where the framework should and should not be deployed.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt7_03"
    },
    {
      "id": "WeBT7.4",
      "paperId": "407",
      "title": "Degradation-Aware Anomaly Detection for Robust Mango Visual Inspection under Imaging Shifts",
      "session": "WeBT7",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528163",
          "name": "Kummoung, Thunrada",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "527991",
          "name": "Boonkerd, Nalinpron",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "416139",
          "name": "Ploysuwan, Tuchsanai",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Robot Vision"
      ],
      "abstract": "Real-world agricultural inspection cameras rarely operate under ideal conditions. Illumination fluctuates throughout the day, lenses accumulate dust and condensation, and fruits arrive at slightly different orientations on the conveyor—all without triggering any alarm. Yet these subtle imaging shifts are enough to erode the performance of state-of-the-art anomaly detection systems that were trained on clean, controlled imagery. In this paper we ask: how much does each type of imaging degradation actually hurt detection accuracy, and can we mitigate it without retraining? To answer this, we benchmark three established methods—PatchCore (multi-view), PatchCore (single-view), and PaDiM—across 15 systematically controlled evaluation conditions on a mango surface-defect dataset (13 imaging degradation conditions, one clean reference, and one semantic-shift probe). Every baseline suffers measurable AUROC drops, with the sharpest declines under surface blur and rotation (>0.15 AUROC points). We then propose DA-PatchCore-V2, which analyses each incoming image, identifies its likely degradation type, and corrects it before feature extraction. DA-PatchCore-V2 reduces the worst-case AUROC drop to just 0.022 —an 86.0% improvement over the strongest clean-image baseline (PatchCore-SV)—while keeping clean-image accuracy within 0.01 AUROC of the top competitor.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt7_04"
    },
    {
      "id": "WeBT7.5",
      "paperId": "299",
      "title": "Portfolio of Solving Strategies in Object Packing and Scheduling for Sequential 3D Printing",
      "session": "WeBT7",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "122135",
          "name": "Surynek, Pavel",
          "affiliation": "Czech Technical University in Prague"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Robotic Applications"
      ],
      "abstract": "Computing power that used to be available only in supercomputers decades ago especially their parallelism is currently available in standard personal computer CPUs. We show how to effectively utilize the computing power of modern multi-core CPUs to solve the complex combinatorial problem of object arrangement and scheduling for sequential 3D printing. We achieved this by parallelizing the existing CEGAR-SEQ algorithm that solves the sequential object arrangement and scheduling by expressing it as a linear arithmetic formula. The original algorithm uses an object arrangement strategy that places objects towards the center of the printing plate. We propose alternative object arrangement strategies such as placing objects towards a corner of the printing plate and scheduling objects according to their height. Our parallelization is done at the high-level - we execute instances of the CEGAR-SEQ algorithm in parallel with a portfolio of object arrangement strategies, an algorithm called Portfolio-CEGAR-SEQ. Our experimental evaluation indicates that Portfolio-CEGAR-SEQ outperforms the original CEGAR-SEQ when a batch of objects for multiple printing plates is scheduled, Portfolio-CEGAR-SEQ often uses fewer printing plates.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt7_05"
    },
    {
      "id": "WeBT7.6",
      "paperId": "406",
      "title": "Disease-Aware Mango Defect Severity Estimation with Selectively Fine-Tuned Vision Foundation Models",
      "session": "WeBT7",
      "date": "2026-10-28",
      "start": "16:55",
      "end": "17:10",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528047",
          "name": "Thiravith, Kampree",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "527991",
          "name": "Boonkerd, Nalinpron",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "416139",
          "name": "Ploysuwan, Tuchsanai",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "Automated mango grading requires severity estimates that remain reliable when lesion boundaries, lighting, and pathogen appearance vary across fruit. This paper presents Disease-Aware Model Conditioning (DAMC), a DINOv2- based framework for four-level mango defect severity estimation. The method uses a disease-conditioned gate to modulate salient patch tokens before Multi-Layer Perceptron classification, while a PatchCore memory bank and physics-guided segmentation provide coverage-based label audit and expert validation. On a verified subset of SenMangoFruitDDS, the method reaches 95.68% four-class severity accuracy and 99.59% binary healthy/diseased detection under five-fold crossvalidation, together with substantial agreement against blinded expert grading (κ = 0.7653). Although the disease-aware head does not exceed a separately fine-tuned no-gate DINOv2 baseline in raw accuracy, the results suggest that it provides a more traceable decision pathway for controlled offline inspection.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt7_06"
    },
    {
      "id": "WeBT8.1",
      "paperId": "170",
      "title": "Proactive Degeneracy Management in Multi-Sensor SLAM through Temporal Prediction and Eigenvalue Optimization (I)",
      "session": "WeBT8",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "451269",
          "name": "Khan, Ehsan Ullah",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Robust multi-sensor SLAM requires continuous adaptation to unpredictable sensor degradation, yet existing systems detect failure only after tracking loss has already corrupted the state estimate. We present ProActive-SLAM, a proactive reactive framework that addresses this through two complementary mechanisms. First, self-supervised DINOv2 features combined with LSTM temporal modeling forecast visual tracking quality ten frames ahead, enabling anticipatory fusion weight adjustment before degradation manifests. Second, we reformulate LiDAR surface normal computation as Rayleigh quotient minimization, where normals emerge as minimum eigenvalue eigenvectors of local scatter matrices with automatic planarity validation (λ0/λ1 < 0.3), eliminating coordinate-frame dependency. Hessian eigenvalue decomposition monitors global pose observability, and both scales share a unified eigenvalue-ratio quality metric that drives continuous, smooth sensor reweighting. Experiments on challenging construction site sequences demonstrate 16.5% lower absolute pose error and 23.2% faster optimization over state-of-the-art baselines, with 100% completion rate where fixed-fusion methods fail catastrophically.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt8_01"
    },
    {
      "id": "WeBT8.2",
      "paperId": "182",
      "title": "IMU-Enhanced Tightly Coupled Lidar-Inertial Odometry for Autonomous Robots (I)",
      "session": "WeBT8",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525994",
          "name": "Nguyen, Phuc Vinh",
          "affiliation": "ChungBuk National University"
        },
        {
          "id": "403327",
          "name": "Hoang, Quoc Hung",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "415390",
          "name": "Tran, Quoc Duy",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robotic Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents a robust, tightly coupled LiDAR-inertial odometry framework for autonomous mobile robots in feature-degraded environments. A cascaded median-IIR-RLS filter is developed to suppress sensor noise and non-stationary vibrations, while a UKF-based attitude estimator with magnetometer compensation mitigates gyroscope drift and magnetic disturbances. The enhanced orientation is incorporated into manifold-based IMU preintegration, and the resulting inertial constraints are tightly fused with edge and planar LiDAR factors in a centralized factor graph. Extensive experiments on agricultural and public datasets demonstrate improved localization accuracy and robustness over state-of-the-art methods.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt8_02"
    },
    {
      "id": "WeBT8.3",
      "paperId": "208",
      "title": "Enhancing Visuomotor Manipulation Control with a Predictive-Dynamics-Aware World-Model-Conditioned Diffusion Policy (I)",
      "session": "WeBT8",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525770",
          "name": "An, Sangho",
          "affiliation": "Hanyang University"
        },
        {
          "id": "461643",
          "name": "Kim, Geunha",
          "affiliation": "Hanyang University"
        },
        {
          "id": "314536",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Recent visuomotor policies have achieved strong performance in robotic manipulation. Specifically, diffusion policy further improves action generation in various tasks. However, the diffusion policy mainly relies on image-based observation features and does not explicitly learn a dynamics-aware representation that summarizes temporal scene progression or object interactions. Therefore, we propose a world-model-conditioned diffusion policy (WM-DP) for visuomotor manipulation. WM-DP extends the original diffusion policy by concatenating a latent feature generated by a world model. Through this design, we study whether a simple early-stage world model conditioning structure can improve real-world manipulation performance without adding architectural complexity. We evaluate WM-DP on real-world pick-and-place tasks using objects with different physical properties. We also evaluate the method using a deformable object whose graspable regions and appearance change depending on its orientation. The results show that our model improves both success rate and trajectory quality under observed object conditions. Overall, our work suggests that even a GRU-based world model can provide useful cues for physical interaction and improve diffusion policy in visuomotor manipulation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt8_03"
    },
    {
      "id": "WeBT8.4",
      "paperId": "223",
      "title": "Adaptive Capacity-Density Control on Distributed Laguerre Diagrams: Achieving Area Equalization in Swarm Shape Formation (I)",
      "session": "WeBT8",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "333575",
          "name": "Phan, Gia Luan",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Navigation, Guidance and Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper addresses the shape-formation problem for a swarm of mobile robots, proposing an adaptive capacity-density control framework on distributed Laguerre diagrams to ensure equal per-robot coverage. Conventional controllers, such as Centroidal Voronoi Tessellations, optimize dispersion but fail to guarantee uniform cell areas, which is critical for balancing sensing, communication, and energy expenditure. To overcome this, we introduce a distributed architecture with two coupled mechanisms: (i) Inter-cell Capacity Balancing, which dynamically adjusts per-robot weights to drive cell areas toward equality; and (ii) Intra-cell Density-Driven Attraction, which uses a mass-biased target to actively guide robot motion toward larger neighboring cells. Furthermore, our framework seamlessly embeds Buffered Voronoi Cells (BVC) within the Laguerre diagram to guarantee collision avoidance. Supported by distributed adaptation laws, we rigorously prove the swarm's global convergence to equal-area centroidal Laguerre tessellations of the prescribed target shape. The framework's efficacy and real-time performance are successfully validated through real-world experiments on a swarm of 20 miniature mobile robots.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt8_04"
    },
    {
      "id": "WeBT8.5",
      "paperId": "246",
      "title": "RBFNN-Assisted Generalized Super-Twisting Sliding Mode Control for PMSM Position Tracking (I)",
      "session": "WeBT8",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524970",
          "name": "Cho, Yongyeon",
          "affiliation": "Hanyang University"
        },
        {
          "id": "461984",
          "name": "Cho, Hyeongwoo",
          "affiliation": "Hanyang University"
        },
        {
          "id": "461997",
          "name": "Lee, Jinyoung",
          "affiliation": "Hanyang University"
        },
        {
          "id": "314536",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Control Devices and Instruments"
      ],
      "abstract": "In this paper, a generalized super-twisting algorithm-based sliding mode control (GSTA-SMC) with radial basis function neural network (RBFNN)-based disturbance compensation is proposed for permanent magnet synchronous motor (PMSM) positioning. To reduce the disturbance rejection burden of the sliding mode controller, the RBFNN estimates the lumped disturbance online and compensates for it in the control input. Simulation results show that the proposed method improves tracking performance and reduces chattering compared with conventional SMC-based controllers.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt8_05"
    },
    {
      "id": "WeBT9.1",
      "paperId": "28",
      "title": "KaDDP: Kalman-Inspired Density Diffusion Policy for Mode-Consistent Trajectory Selection (I)",
      "session": "WeBT9",
      "date": "2026-10-28",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523928",
          "name": "Sung Jin, Kim",
          "affiliation": "Keimyung University"
        },
        {
          "id": "523925",
          "name": "Sangwon, Kim",
          "affiliation": "Electronics and Telecommunications Research Institute (ETRI)"
        },
        {
          "id": "523927",
          "name": "Kyoungoh, Lee",
          "affiliation": "Electronics and Telecommunications Research Institute (ETRI)"
        },
        {
          "id": "484065",
          "name": "Ko, Byoung Chul",
          "affiliation": "Keimyung University"
        },
        {
          "id": "376079",
          "name": "Kim, Kwang-Ju",
          "affiliation": "Electronics and Telecommunications Research Institute (ETRI)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "Diffusion Policy has emerged as a powerful framework for robot behavior cloning, enabling multimodal action distributions that capture diverse motion strategies. However, this multimodality introduces a critical failure mode we term Decision Wavering: at each control step, the policy independently samples a trajectory, risking abrupt mode switches between consecutive steps. This causes the robot to oscillate between conflicting modes, converging toward unintended intermediate behaviors rather than committing to a single coherent strategy. We propose KaDDP, an inference-time framework that resolves Decision Wavering without retraining. Given N candidate trajectories sampled from Diffusion Policy, we estimate their densities via Kernel Density Estimation with a Gaussian kernel. A Kalman-inspired prior then incorporates the previous step's mode, computing a posterior score that favors trajectories consistent with the currently committed mode. The trajectory with the highest posterior score is selected for execution. We evaluate KaDDP on the Push-T benchmark against Diffusion Policy, demonstrating reduced steps to task completion and improved success rate over the Diffusion Policy baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt9_01"
    },
    {
      "id": "WeBT9.2",
      "paperId": "160",
      "title": "Construction and Performance Comparison of a Real-Time Action Recognition Dataset for Patrol Robots in Daytime and Nighttime Outdoor Environments (I)",
      "session": "WeBT9",
      "date": "2026-10-28",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525862",
          "name": "Kang, Miseon",
          "affiliation": "Electronics and Telecommunications Research Institute"
        },
        {
          "id": "525891",
          "name": "Kim, Jinwoo",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "525865",
          "name": "Lee, Janghoon",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "525866",
          "name": "Lee, Sanghyeon",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "477139",
          "name": "Lee, Jong Taek",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "376079",
          "name": "Kim, Kwang-Ju",
          "affiliation": "Electronics and Telecommunications Research Institute (ETRI)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents an action recognition dataset and a comparative evaluation of action recognition models for patrol robots operating in daytime and nighttime outdoor environments. Unlike fixed surveillance camera environments, patrol robots operate as mobile platforms; therefore, viewpoint changes, perspective variations, camera shake, and dynamic background changes continuously occur. Robust recognition performance is also required under diverse illumination conditions. In this study, a daytime and nighttime outdoor action recognition dataset reflecting real-world patrol robot operating scenarios was constructed, and the performance of video-based and skeleton-based action recognition models was compared. The experimental results show that the skeleton-based models generally outperformed the video-based model. In particular, the model that converts skeleton information into two-dimensional heatmap representations and learns spatio-temporal features achieved the best performance, with an accuracy of 0.95, an F1 score of 0.77, and a mean average precision (mAP) of 0.84. These results demonstrate that skeleton-based approaches can be effectively applied to real-time action recognition for patrol robots in daytime and nighttime outdoor environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt9_02"
    },
    {
      "id": "WeBT9.3",
      "paperId": "176",
      "title": "Rotation-Aware Continuous-Time Conflict-Based Search for Multi-Agent Path Planning (I)",
      "session": "WeBT9",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525965",
          "name": "Nam, Seung-Woo",
          "affiliation": "Electronics and Telecommunications Research Institute"
        },
        {
          "id": "334373",
          "name": "Kwon, Wookyong",
          "affiliation": "ETRI"
        },
        {
          "id": "270519",
          "name": "Chung, Yun Su",
          "affiliation": "ETRI"
        },
        {
          "id": "525969",
          "name": "Li, Song",
          "affiliation": "Electronics and Telecommunications Research Institute"
        },
        {
          "id": "151325",
          "name": "Park, Soon-Yong",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "303720",
          "name": "Han, Dong Seog",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Robotic Applications"
      ],
      "abstract": "This paper presents a rotation-aware extension of Continuous-Time Conflict-Based Search (CCBS) for multi-agent path planning in graph-based workspaces with heterogeneous robots. Conventional CCBS and its improved variants model each transition as a single linear edge traversal and detect conflicts solely between linear motion segments. This abstraction underestimates arrival times and misses collisions during in-place turns, which is critical when robots have non-negligible angular inertia or low angular speed. The proposed method decomposes each graph-edge transition into (i) an in-place rotation phase and (ii) a linear translation phase, and integrates both phases into the SIPP low-level planner and the CBS high-level conflict resolution. The rotation time depends on the heading difference between consecutive edges and on the agent-specific angular velocity w_(k ); the linear time depends on the edge weight and the agent-specific linear velocity v_k. Conflict detection is extended to cover move–move, rotate–move, move–rotate, and rotate–rotate pairs, ensuring safety during turning. Because v_k and w_(k )are per-agent parameters, the framework naturally accommodates fleets of robots with heterogeneous kinematic capabilities. Experiments on graph-based roadmaps with ten agents show that the rotation-aware formulation reduces the number of high-level CT expansions by 47.2% and low-level searches by 54.7% compared with the original CCBS, at the cost of a 3.7% increase in flowtime that reflects the physical realities of robot turning.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt9_03"
    },
    {
      "id": "WeBT9.4",
      "paperId": "191",
      "title": "Reinforcement Learning-Based Precision Control for Robot Manipulators in Repetitive Tasks (I)",
      "session": "WeBT9",
      "date": "2026-10-28",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "334373",
          "name": "Kwon, Wookyong",
          "affiliation": "ETRI"
        },
        {
          "id": "250260",
          "name": "Song, Bongsub",
          "affiliation": "Electronics and Telecommunications Research Institute"
        },
        {
          "id": "465674",
          "name": "Jin, Yongsik",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Repetitive industrial manipulation tasks such as pick-and-place, polishing, and assembly demand high precision under stochastic disturbances. Classical iterative learning control (ILC) exploits trial-to-trial repetition but is brittle under non-repetitive disturbances, while reinforcement-learning (RL) residual policies often ignore the trial-domain error structure that is the dominant signal in repetitive operation. This paper proposes Iteration-Domain Residual ILC (IDR-ILC), a Soft Actor-Critic (SAC) policy conditioned on the previous trial's error trajectory at the same time index, generating a per-step adaptive update to a stored ILC feedforward. A saturated accumulator and an error-multiplicative action structure make the residual vanish at convergence. A emph{contraction filter} (IDR-ILC-CF) projects each trial-domain accumulator update onto the set {Deltadelta : |Deltadelta|_F le rho |e_k|_F}, giving a sufficient condition for monotonic iteration-domain contraction. On a 7-DOF Franka Panda simulation under random payload, IDR-ILC reaches final-trial joint-space RMSE of 0.0202~rad (sinusoidal) and 0.0206~rad (Lissajous), strictly dominating PD and a same-budget Residual-PPO (paired t-test p<0.05) and matching PD-ILC and RLILC in mean. IDR-ILC-CF trades a 10% mean increase for a 3times reduction in cross-seed standard deviation. At a matched 8000-step budget, memoryless Residual-PPO is worse than PD, identifying previous-trial error conditioning as the decisive signal at this data scale.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt9_04"
    },
    {
      "id": "WeBT9.5",
      "paperId": "389",
      "title": "Toward Omnidirectional Snake Robot Locomotion Via Direction-Decomposed Reinforcement Learning (I)",
      "session": "WeBT9",
      "date": "2026-10-28",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "250260",
          "name": "Song, Bongsub",
          "affiliation": "Electronics and Telecommunications Research Institute"
        },
        {
          "id": "500815",
          "name": "Lee, Seongmun",
          "affiliation": "DGIST"
        },
        {
          "id": "334373",
          "name": "Kwon, Wookyong",
          "affiliation": "ETRI"
        },
        {
          "id": "206601",
          "name": "Yun, Dongwon",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology (DGIST)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Control Devices and Instruments"
      ],
      "abstract": "Snake robots achieve locomotion through continuous, anisotropic frictional contact distributed over the whole body, which makes a single omnidirectional reinforcement learning (RL) policy difficult to train. In this paper, we take a first step toward omnidirectional snake robot control by decomposing the control problem along the direction of travel. We first calibrate the contact parameters of a MuJoCo simulation against drop-test experiments on five real surfaces, so that both the coefficient of restitution and the peak impact force are reproduced. On this calibrated model, we randomly sample compound-serpenoid gait parameters and analyze the resulting motion in terms of forward, lateral, and yaw velocity, identifying representative parameter sets that produce effective motion in each of eight principal directions. A torque-based Motion Matrix derived from each parameter set is then used as a morphological prior that constrains the action space of a direction-specific PPO policy. Simulation results show that the learned policies reliably generate motion in their assigned directions and outperform a conventionally tuned open-loop serpenoid controller in both path straightness and average forward speed.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#webt9_05"
    },
    {
      "id": "WePo2P.1",
      "paperId": "614",
      "title": "Worker’s Efficiency Estimation Using Image Processing",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "190759",
          "name": "Ravankar, Abhijeet",
          "affiliation": "Kitami Institute of Technology"
        },
        {
          "id": "190763",
          "name": "Ravankar, Ankit A.",
          "affiliation": "Tohoku University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Many factories require high precision in assembly operations. Errors in assembly lead to defective products and result in consumer complaints. Therefore, it is essential to detect such errors as early as possible. In this paper, we use image processing to identify these errors. The correct sequence of assembly parts is known in advance. Each step of the assembly process is identified and checked against the correct sequence in real time. If an incorrect sequence is detected, an alarm sounds immediately. The correct sequence and components are also displayed. For image processing, a CNN model is trained to detect different components, their positions, and the correct sequence. This system requires only a monocular camera, and processing can be performed on an inexpensive computing board.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_01"
    },
    {
      "id": "WePo2P.2",
      "paperId": "624",
      "title": "PointNet++ Field Surrogate for Patient-Specific VA-ECMO Watershed Prediction",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461967",
          "name": "An, Jae Hyun",
          "affiliation": "Incheon National University"
        },
        {
          "id": "531547",
          "name": "Im, Jingyeong",
          "affiliation": "Korea University"
        },
        {
          "id": "531548",
          "name": "Gu, Boram",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "409324",
          "name": "Kim, Jong Woo",
          "affiliation": "Incheon National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Veno-arterial extracorporeal membrane oxygenation (VA-ECMO) drives oxygenated blood retrograde into the descending aorta, where it meets the antegrade output of the native heart and forms a watershed (mixing) region whose location decides which organs receive oxygenated flow---the basis of differential hypoxia (Harlequin syndrome). Patient-specific computational fluid dynamics (CFD) resolves the watershed but costs hours to days per case. We cast watershed prediction as point-cloud field regression: a PointNet++ surrogate (set-abstraction encoder, feature-propagation decoder) predicts the per-node retrograde-flow fraction throughout the aortic volume from patient geometry and boundary conditions, with no CFD field as input. As each case labels ~10^6 points, the field formulation is far more data efficient than scalar surrogates. On ten patient-specific cases under case-level leave-one-out cross-validation, it attains a watershed IoU of 0.81, an ECMO-perfused-region error of 7.2%, and a watershed-level error of 20mm.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_02"
    },
    {
      "id": "WePo2P.3",
      "paperId": "630",
      "title": "Human Tacit Intelligence: A Knowledge Representation Framework for Safety-Critical Industrial Operations",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "349624",
          "name": "Weon, Ihnsik",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Human-Robot Interaction"
      ],
      "abstract": "Skilled human operators remain indispensable in safety-critical industrial environments despite advances in automation and AI. Existing industrial AI frameworks mainly rely on perception-to-control pipelines or state-to-action learning, without explicitly modeling the cognitive processes underlying expert operation. To address this gap, this paper introduces Human Tacit Intelligence (HTI), a conceptual framework that represents expert intelligence as a hierarchical process integrating perception, situation awareness, tacit memory, operational reasoning, decision, and action. We propose an HTI cognitive pipeline together with a five-layer representation hierarchy spanning raw sensor signals, environment states, operation primitives, operational skills, and tacit intelligence. Rather than presenting a task-specific learning algorithm, this work establishes a foundational representation framework for future HTI datasets, learning architectures, explainable reasoning models, foundation models, and industrial Physical AI. HTI is expected to provide a unifying paradigm for capturing and learning expert intelligence in safety-critical industrial domains.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_03"
    },
    {
      "id": "WePo2P.4",
      "paperId": "631",
      "title": "LEXI: Learning Excitation Policies for Legged-Robot System Identification",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "314709",
          "name": "Youm, Donghoon",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "172467",
          "name": "Hwangbo, Jemin",
          "affiliation": "Korean Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Information and Networking",
        "Robotic Applications"
      ],
      "abstract": "Accurate inertial and actuator parameters are important for transferring dynamic legged-robot controllers from simulation, but collecting informative identification data on hardware remains difficult. Classical optimal excitation first selects a finite-dimensional trajectory family and then optimizes its coefficients, thereby restricting the reachable motions. This paper presents LEXI, a reinforcement-learning framework that generates excitation through the robot's joint-target interface while maximizing a natural-metric-normalized Fisher information matrix (FIM). A recurrent policy conditions on causal proprioception and the accumulated FIM spectrum, and is trained with physical randomization and safety constraints. On a Raibo2 leg mounted on a rigid jig, a 30-s LEXI trajectory increases the realized FIM log determinant from 183.3 for a D-optimal ellipsoidal baseline to 193.4, while increasing the minimum eigenvalue from 0.060 to 0.101. Across 100 randomized simulation trials with known parameters, LEXI reduces base-parameter identification error from 0.305pm0.184 to 0.185pm0.137. The identified model also yields the smallest sim-to-real stride and gait-cycle errors after retraining a 4-m/s locomotion policy.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_04"
    },
    {
      "id": "WePo2P.5",
      "paperId": "635",
      "title": "Simulating the Unseen: Zero-Shot Disaster Video Generation Via VLM-Driven Hazard Reasoning",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461761",
          "name": "Lee, Jeongmin",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "104763",
          "name": "Kim, Jungho",
          "affiliation": "Korea Electronics Tech. Inst"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Civil and Urban Control Systems",
        "Multimedia Systems"
      ],
      "abstract": "Understanding the progression of potential hazards is critical for proactive facility management and the robust training of physical AI systems. However, real-world disaster footage is inherently scarce, making it exceedingly difficult to simulate such extreme edge cases. Furthermore, simple supervised training approaches for risk simulation are fundamentally limited by this severe lack of long-tail data. To overcome these data bottlenecks without relying on manual labor, this work outlines an automated, multi-stage generative pipeline for synthesizing highly realistic disaster simulation videos from a single still image. Anchored by an automated privacy-preserving module to securely sanitize real-world inputs, our approach orchestrates a deeply integrated pipeline where VLM-driven zero-shot risk analysis semantically guides a cohesive cascade of open-vocabulary segmentation, high-fidelity image inpainting, and state-of-the-art Image-to-Video (I2V) generation. The resulting pipeline generates context-aware, temporally consistent simulations of hazards such as fire, flood, and structural damage. Empirical evaluation demonstrates that this plug-and-play design requires no domain-specific fine-tuning or dataset accumulation, offering a scalable solution for automated risk visualization and data augmentation in extreme scenarios.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_05"
    },
    {
      "id": "WePo2P.6",
      "paperId": "653",
      "title": "Counterfactual Token Augmentation for Robust VLM-Based Road-Hazard Reasoning under Incorrect Weather Text",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "531758",
          "name": "Yang, Seongryeol",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "147191",
          "name": "Kim, Jiwoong",
          "affiliation": "Korea Institute of Industrial Technology(KITECH)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper addresses vision-language model (VLM)-based road-hazard reasoning in autonomous driving. A perception module summarizes the weather condition into a textual weather token, which is injected into the VLM together with the image. However, weather classification often fails in adverse weather, VLMs tend to over-trust text that contradicts the image, and fine-tuning on always-correct tokens further reinforces this tendency. Given a wrong token, the model thus explains the hazard based on the wrong weather instead of the actual one. To alleviate this problem, this paper applies counterfactual token augmentation (CTA), which duplicates a small fraction of the training pairs, changes only the token of each copy to a different weather, and keeps the ground-truth explanation image-grounded. Experiments show that a small fraction of mismatched pairs largely removes the token-copying bias and grounds the explanations in the actual weather, while preserving the benefit of fine-tuning. This yields VLM-based road-hazard reasoning that is robust to incorrect weather information.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_06"
    },
    {
      "id": "WePo2P.7",
      "paperId": "657",
      "title": "Research on Task Planning and Motion Control of Manipulator Based on Large Language Models",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "530691",
          "name": "Kim, Seong Hyeon",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "532104",
          "name": "Song, Hyun Min",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "532113",
          "name": "Jeong, Se Hyeon",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "532160",
          "name": "Heo, Duck Hyun",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "349579",
          "name": "Kim, Sun Je",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "Recently, unmanned inspection methods utilizing mobile manipulators have been employed for onboard inspections of ships during operation. Conventional manipulator control methods have relied on expertise in kinematics. More recently, control methods based on Large Language Models (LLMs), which enable communication via simple natural language have gained attention. However, despite the limitations of LLMs in hallucination and computational costs, few studies have directly compared control performance and stability according to the level of LLM intervention. This study investigates the appropriate level of LLM intervention required to achieve optimal control performance and quantitatively compares two control strategies: (1) a method where the LLM performs command interpretation, coordinate estimation, and joint angle calculation, and (2) a method where the LLM is used solely as a natural language command interpreter, while control of manipulator is performed using inverse kinematics-based reinforcement learning. As a result of verifying the Euclidean distance error between the actual target point and the end-effector through simulation, the LLM-only control method showed an error of 0.1654 m, while the hybrid control method showed an error of 0.0023 m. In the future, the two control methods will be implemented on physical manipulator, and additional analyses of error factors will be conducted to evaluate their practical applications.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_07"
    },
    {
      "id": "WePo2P.8",
      "paperId": "658",
      "title": "Clinical Data Collection and Utilization for the Development of an AI-Based Humanoid Surgical Assistance Robot",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527585",
          "name": "Kang, Seungrok",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527637",
          "name": "Shin, Sun Hye",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527638",
          "name": "Jeong, Da Woon",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527641",
          "name": "Lee, Sarang",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527633",
          "name": "Yun, Jieon",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527636",
          "name": "Jeon, GaHye",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527634",
          "name": "Jang, Ji Seok",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527642",
          "name": "Kim, Ra Youn",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527640",
          "name": "Sung, Minji",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "527639",
          "name": "Jo, Yunju",
          "affiliation": "Jeonbuk National University Hospital"
        },
        {
          "id": "528331",
          "name": "Kim, Gi-Wook",
          "affiliation": "Jeonbuk. National University Hospital"
        },
        {
          "id": "528235",
          "name": "Ko, Myoung-Hwan",
          "affiliation": "Jeonbuk National University Medical School and Hospital"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Human-Robot Interaction",
        "Robot Mechanism and Control"
      ],
      "abstract": "This study presents the development of an AI-based humanoid surgical assistant platform designed to support both open and laparoscopic surgeries. The platform integrates Physical AI technologies to enable context-aware autonomous decision-making, surgical assistance, situational awareness, and risk response. It provides three operational modes: Passive Control, Autonomous AI, and Tele-control/Tele-mentoring, while also functioning as an integrated operating room support system that monitors patient physiological signals and intraoperative conditions. To develop and validate AI models, multimodal clinical data—including surgical field videos, operating room videos, audio recordings, and physiological signals—were prospectively collected and integrated into a comprehensive surgical dataset. Procedure-specific surgical videos were acquired from colorectal, otorhinolaryngology, and thoracic surgeries. The collected data were synchronized and preprocessed to support the development of a surgery-specific Vision AI framework and Surgical Large Language Model (LLM), incorporating real-time video enhancement, 2D–3D mapping, surgical instrument recognition, and contextual scene understanding. The proposed platform establishes the foundation for an intelligent humanoid surgical assistant by integrating hybrid compliance control, Vision AI, Surgical LLM, and multimodal data analysis. Future work will focus on enhancing physiological monitoring and developing predictive AI models capable of identifying critical intraoperative events, thereby advancing the system toward practical clinical deployment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_08"
    },
    {
      "id": "WePo2P.9",
      "paperId": "662",
      "title": "An Inpainting-Based Constrained Reconstruction Framework to Enhance Difference Map Discriminability for Tiny Object Detection",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532165",
          "name": "Kim, Gyeongseo",
          "affiliation": "Dankook University"
        },
        {
          "id": "532177",
          "name": "Kim, Han Sol",
          "affiliation": "Dankook University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing",
        "Robot Vision"
      ],
      "abstract": "The existing self-reconstruction-based approaches for enhancing tiny object representations suffer from an objective conflict problem, where the optimizing the reconstruction included tiny object regions conflicts with the goal of generating dis-criminative spatial priors through the difference map. We propose the inpainting-based constrained reconstruction (ICR) framework for improving discriminative difference maps. To address this, we propose the ICR framework, which generates pseudo-background training set by replacing tiny object regions to background pixel via an inpainting model. Experiment on the VisDrone2019 dataset demonstrates that the proposed ICR framework produces more discriminative difference maps in tiny object regions throughout training, confirming that the spatial prior quality is effectively maintained.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_09"
    },
    {
      "id": "WePo2P.10",
      "paperId": "679",
      "title": "Do Agents Know What They Sense? a Vision-Grounded Benchmark for Identifying Unlabeled Sensor Channels",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "505973",
          "name": "Kang, Sangjin",
          "affiliation": "Daegu Gyeongbuk Institute of Science & Technology"
        },
        {
          "id": "532295",
          "name": "Yu, Jaesok",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        },
        {
          "id": "184906",
          "name": "Park, Kyungseo",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology (DGIST)"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "Deploying an autonomous agent on a new hardware platform typically requires manually specifying what each sensor channel measures. To examine whether pretrained models can perform this step without manual labeling, we introduce a vision-grounded benchmark in which video-capable multimodal large language models (MLLMs) assign unlabeled sensor streams to a provided list of sensors using synchronized third-person video. The benchmark is designed so that the stream-to-sensor mapping cannot be determined from signal structure alone, making visual grounding necessary. We conduct a preliminary evaluation of three open-weight video-capable MLLMs under a ten-episode budget. None achieves confirmed complete identification, and repeated passive observations do not produce stable correction of incorrect mappings.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_10"
    },
    {
      "id": "WePo2P.11",
      "paperId": "682",
      "title": "Humanoid Teleoperation in Simulation Using Whole-Body Inertia Motion Capture Sensor and Hand Motion-Capture Glove",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532313",
          "name": "Kim, Donghyun",
          "affiliation": "SungKyunKwanUniversity"
        },
        {
          "id": "111254",
          "name": "Choi, Mun-Taek",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Human-Robot Interaction",
        "Sensors and Signal Processing"
      ],
      "abstract": "Teleoperation is a widely used method for collecting demonstration data to train Vision-Language-Action (VLA) models, particularly on humanoid hardware. Such data is commonly generated by capturing human motion with hand-held VR controller setups, which typically provide only wrist poses and therefore cannot represent the operator's full-body and hand configuration. In this paper, we present a teleoperation pipeline that captures the operator's whole-body motion with a wearable Inertia Motion Capture sensor and finger motion with motion-capture gloves, and retargets the measured motion to a humanoid model in the MuJoCo simulator through a learned whole-body control policy.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_11"
    },
    {
      "id": "WePo2P.12",
      "paperId": "684",
      "title": "RAG with Expert Validation in Agricultural Domain",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532317",
          "name": "Kim, Jinwoo",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "532315",
          "name": "Jang, Jaehyung",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "111254",
          "name": "Choi, Mun-Taek",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Agricultural domain knowledge is scattered across unstructured documents, making it challenging to construct a highly reliable QA dataset. To address this issue, we propose a pipeline for constructing a context-based agricultural QA dataset. Furthermore, we systematically optimized a RAG pipeline using the constructed QA dataset, improving the performance of an agricultural consulting system. RAG optimization was performed for both the retriever and generator, with each module evaluated using the F1 score. The final RAG pipeline, combining the optimal retriever (ColBERT) and generator (Qwen2.5-32B), achieved a 0.118 increase in BERTScore over the LLM-only baseline, corresponding to an 18.1% relative performance improvement.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_12"
    },
    {
      "id": "WePo2P.13",
      "paperId": "32",
      "title": "Improvement of Braking Accuracy of Urban Rail Trains under Input Saturation",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "523799",
          "name": "Liu, Xiao Long",
          "affiliation": "Shandong Normal University"
        },
        {
          "id": "523816",
          "name": "Huang, Ya xin",
          "affiliation": "Shandong Normal University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "Aiming at the input saturation issue during the emergency braking of urban rail trains, this paper constructs a nonlinear braking dynamic model considering actuator saturation to analyze its adverse effects on braking performance. A funnel-based arctangent anti-windup control algorithm is proposed in this work. By virtue of predefined time-varying error boundaries and adaptive compensation modules, the developed algorithm achieves high-precision trajectory tracking and rapid braking force distribution subject to saturation constraints. This scheme effectively suppresses the response delay and error divergence induced by input saturation, while guaranteeing the global uniform boundedness of the closed-loop system via rigorous stability analysis. Numerical simulation results demonstrate that the tracking error is always confined within the preset funnel boundary and converges to the predefined accuracy level within 10 seconds. Meanwhile, the control input complies with the output limitation of actuators without saturation overflow. The proposed control strategy substantially enhances stopping accuracy, dynamic response performance and operational stability. It further provides solid theoretical basis and technical reference for the high-safety and high-precision emergency braking control of urban rail trains in the presence of input saturation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_13"
    },
    {
      "id": "WePo2P.14",
      "paperId": "63",
      "title": "Risk-Adaptive Spatio-Temporal APF with CBF-QP Safety Filtering for Multi-Vehicle Formation Navigation in Dynamic Environments",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525096",
          "name": "Zhang, Bei",
          "affiliation": "Jilin University"
        },
        {
          "id": "525162",
          "name": "Kang, Qianzhi",
          "affiliation": "Jilin University"
        },
        {
          "id": "525196",
          "name": "Zheng, Hongyu",
          "affiliation": "Jilin University"
        },
        {
          "id": "525201",
          "name": "Zuo, Zixin",
          "affiliation": "Jilin University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Leader-follower formations involve role assignment and relative state tracking, which makes them fragile near clutter. A leader can brake, turn around an obstacle, or enter a narrow passage while followers still track fixed offsets. The nominal field may then point into a closing gap or toward a road edge. To address this issue, this paper combines a sampled oriented-bounding-box CBF-QP check with a rollout verification before action execution, and proposes a risk-adaptive spatiotemporal artificial potential field (APF) scheme, which provides benchmark evidence for the implemented safety stack by achieving zero collisions across 1,650 rigorous simulation runs.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_14"
    },
    {
      "id": "WePo2P.15",
      "paperId": "76",
      "title": "Structural Safety Evaluation of a Lower Mobile Platform for a Forestry Robot Using FEA",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "326407",
          "name": "Park, In-Gyu",
          "affiliation": "KIRO, Korea Institute of Robot and Convergence"
        },
        {
          "id": "319534",
          "name": "Noh, Kyoungseok",
          "affiliation": "Korea Institute of Robotics & Technology Convergence"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Forestry robots must operate on steep, soft, and irregular terrain while supporting a heavy working arm and payload; therefore, the structural reliability of the lower mobile platform is essential. This study presents a numerical evaluation of the structural safety of a lower mobile platform for a forestry robot. A three-dimensional finite element model based on the actual platform geometry was constructed, and static, modal, impact, and frequency response analyses were conducted using Midas NFX 2016 R1. The applied load included the engine room, working arm, and payload, corresponding to a total concentrated load of 14,000 kgf (137.3 kN) at the arm joint. The criteria were a safety factor above 3 based on yield strength and a first natural frequency above 10 Hz for the main frame excluding tires. In the static analysis, the maximum Von-Mises stress was 262.2211 MPa at the hip joint, giving a safety factor of 3.23. The first natural frequency of the frame without tires was 12.317 Hz. Under impact and frequency excitation, the minimum safety factors were 3.005 and 3.426, respectively. The results demonstrate that the proposed platform satisfies the structural safety requirements under the considered operating conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_15"
    },
    {
      "id": "WePo2P.16",
      "paperId": "78",
      "title": "Online Target-Less Radar-LiDAR-Camera Extrinsic Calibration Via Joint Optimization",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "412155",
          "name": "Shin, Gunhee",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        },
        {
          "id": "273996",
          "name": "Kim, Yunsoo",
          "affiliation": "KAIST"
        },
        {
          "id": "525402",
          "name": "Lee, Chanhyuk",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "462182",
          "name": "Kim, Wanhee",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "527477",
          "name": "Lee, Minwoo",
          "affiliation": "Kookmin University"
        },
        {
          "id": "528072",
          "name": "Han, Sungwoo",
          "affiliation": "LG Innotek"
        },
        {
          "id": "528364",
          "name": "Woo, Jeongwoo",
          "affiliation": "LG Innotek"
        },
        {
          "id": "367569",
          "name": "Chin, Hyuntai",
          "affiliation": "Thordrive"
        },
        {
          "id": "528707",
          "name": "Park, Minha",
          "affiliation": "LGInnotek"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Vision",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_16"
    },
    {
      "id": "WePo2P.17",
      "paperId": "109",
      "title": "LACE: Loop-Constraint Augmentation with Reprojection-Guided Correspondence Verification and Edge Selection for Visual-Inertial Pose Graph Optimization in Sparse-Loop Indoor Environments",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "314574",
          "name": "Shin, Sungjae",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "525384",
          "name": "Kim, Dongjae",
          "affiliation": "KAIST"
        },
        {
          "id": "525397",
          "name": "Hwang, Uihyun",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Visual SLAM systems inevitably accumulate drift during long-term operation, and loop closure is essential for correcting this drift through pose graph optimization. However, in sparse-loop indoor environments such as long corridors and large-scale workspaces, loop events occur infrequently, making each detected loop highly important for trajectory correction. This paper proposes LACE, a loop-constraint augmentation framework with reprojection-guided correspondence and edge selection for visual-inertial pose graph optimization. Instead of relying on a single constraint from a loop event, LACE expands retrieved loop candidates using temporally neighboring keyframes to generate multiple candidate loop edges. To suppress false-positive constraints, feature correspondences are verified through Top-K descriptor matching followed by reprojection-error-based selection. Each candidate loop hypothesis is then estimated using PnP-RANSAC, and high-quality loop edges are selected based on inlier support and median reprojection error before being inserted into pose graph optimization. Experiments on KAIST indoor sequences and the EuRoC Vicon Room dataset show that LACE achieves the lowest average ATE RMSE across all evaluated settings and consistently outperforms the Expansion-only variant.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_17"
    },
    {
      "id": "WePo2P.18",
      "paperId": "150",
      "title": "Balanced Multi-Robot Coverage Routing Via Graph-Based Path Clustering",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "295164",
          "name": "Kim, Kyungseo",
          "affiliation": "Korea Advanced Institute of Science and Technology, KAIST"
        },
        {
          "id": "407671",
          "name": "Park, Junwoo",
          "affiliation": "KAIST"
        },
        {
          "id": "162950",
          "name": "Kim, Jinwhan",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a multi-robot coverage method that minimizes mission completion time by balancing workloads among robots. The proposed method clusters adjacent straight-line coverage paths in a polygonal environment and assigns each cluster to a robot. We adopt a two-phase approach: (i) polygon decomposition to generate turn-minimizing straight-line paths, followed by (ii) graph-based path clustering to distribute the workload evenly. Evaluated over 100 randomly generated polygonal environments with 2--8 robots, the method achieves lower average mission time than path-assignment baselines while significantly reducing planning computation time. Additional simulations with up to 100 robots and a benchmark environment confirm scalability and effectiveness for heterogeneous-speed teams.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_18"
    },
    {
      "id": "WePo2P.19",
      "paperId": "161",
      "title": "Ground-Relative Multi-Height BEV Traversability Estimation for Vegetation-Rich Off-Road LiDAR Perception",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525523",
          "name": "Jeon, Chanhyeong",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "184156",
          "name": "Choi, Keun Ha",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "126125",
          "name": "Kim, Kyung-Soo",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Vision",
        "Sensors and Signal Processing"
      ],
      "abstract": "Vegetation-rich off-road driving requires perception outputs that indicate cell-level traversability rather than only fine-grained semantic categories. This paper presents a LiDAR-only BEV traversability estimation framework that predicts four classes: passable, caution, unknown, and blocked. The method estimates ground-relative height, constructs a 44-channel multi-height BEV tensor over an 80 m × 80 m area, and augments the single-frame representation with local temporal summary channels. The input features encode height-bin density and occupancy, remission and range statistics, ground-relative height statistics, vertical structure, ground support, and repeated temporal evidence. Preliminary experiments on vegetation-rich GOOSE validation scenes show strong class imbalance, with blocked cells occupying only 1.56% of labeled BEV cells after ambiguous unknown cells are excluded. The full model achieves 0.7751 mIoU, 0.8277 blocked recall, and a false-passable rate of 0.0006. A 2×2 ablation indicates that multi-height geometry is the main factor in reducing unsafe openings, while temporal summary provides complementary but not fully independent gains.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_19"
    },
    {
      "id": "WePo2P.20",
      "paperId": "175",
      "title": "Simulation of Graph Neural Networks for Decentralized Multi-Waypoint Task Allocation",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463818",
          "name": "Yu, Hyungseop",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "409270",
          "name": "Park, Jun-Oh",
          "affiliation": "Gwangju Institute of Science and Technology(GIST)"
        },
        {
          "id": "409256",
          "name": "Kim, Yeong-Ung",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        },
        {
          "id": "525961",
          "name": "Kim, Jae Joon",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "409254",
          "name": "Bae, Yoo-Bin",
          "affiliation": "Korea Aerospace Research Institute"
        },
        {
          "id": "112126",
          "name": "Ahn, Hyo-Sung",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a simulation study of a Decentralized Graph Neural Network (DGNN) for task assignment in ROS2-based multi-robot systems. The DGNN is trained to imitate the solution of the centralized Hungarian algorithm for a task assignment problem, where each task consists of multiple waypoints. The DGNN has an encoder–GNN module–decoder architecture, and a total of 9 MLPs are trained independently of the number of agents and tasks. To handle cases where the number of tasks exceeds the number of agents, we train the model using a weighted binary cross-entropy loss. Simulation results demonstrate that the trained DGNN effectively imitates the centralized Hungarian solution. Its implementation in a ROS2 environment further confirms its applicability to asynchronous distributed task allocation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_20"
    },
    {
      "id": "WePo2P.21",
      "paperId": "183",
      "title": "Compound State-Triggered Constrained DDP for Receding-Horizon Quadrotor Landing on a Moving Platform",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525976",
          "name": "Noh, SungJin M",
          "affiliation": "Department of Electrical and Computer Engineering, Inha University"
        },
        {
          "id": "410854",
          "name": "Kim, Yonghee",
          "affiliation": "Inha University"
        },
        {
          "id": "525985",
          "name": "Kim, Yeohosua",
          "affiliation": "Inha University"
        },
        {
          "id": "334540",
          "name": "Kim, Kwangki",
          "affiliation": "Inha University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Control Theory and Applications"
      ],
      "abstract": "Landing a quadrotor on a moving target requires online replanning under uncertain target motion while maintaining tight final-approach geometry. Enforcing approach constraints, such as a glideslope cone, over the entire horizon is often infeasible from arbitrary initial conditions, whereas removing them entirely weakens the safety envelope near touchdown. This paper presents a receding-horizon landing planner that resolves this tension by embedding state-triggered constraints (STCs) in differential dynamic programming (DDP). The tightened approach bounds are activated only after the vehicle enters the final-approach region, and the optimizer determines when each constraint switches on. The STC residuals are accumulated through an RK4-integrated scalar state and enforced by a single terminal equality handled by the augmented-Lagrangian branch of constrained DDP. Across 100 randomized initial conditions, cSTC-DDP achieves 93 compliant landings (98 total) with a 0.95 s median cold full-horizon solve time, versus 86 landings and 4.05 s for OpenSCvx. Hardware experiments demonstrate off-board receding-horizon replanning at approximately 5 Hz (178–188 ms median solve time) under circular and random target motion.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_21"
    },
    {
      "id": "WePo2P.22",
      "paperId": "228",
      "title": "A Collaborative Multi-Wheel Tire-Force Decision-Making Method for Trajectory Tracking Considering Tire Cornering Stiffness Uncertainty",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526019",
          "name": "Han, Zongzhi",
          "affiliation": "Jilin University"
        },
        {
          "id": "526110",
          "name": "Gao, Zhenhai",
          "affiliation": "Jilin University"
        },
        {
          "id": "526111",
          "name": "Liu, Weidong",
          "affiliation": "Jilin University"
        },
        {
          "id": "526058",
          "name": "Zhang, Hanying",
          "affiliation": "Jilin University"
        },
        {
          "id": "526117",
          "name": "Li, Zonghao",
          "affiliation": "Jilin University"
        },
        {
          "id": "526830",
          "name": "Xu, Bin",
          "affiliation": "Jilin University"
        },
        {
          "id": "540591",
          "name": "Li, Yanchun",
          "affiliation": "FAW-Volkswagen Automotive Co., Ltd"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications"
      ],
      "abstract": "For distributed electric vehicles, multi-wheel tire-force inputs are accompanied by strong lateral–longitudinal coupling, complex multi-actuator constraints, and parameter uncertainties that affect tire-force allocation. To address these issues, a stochastic cooperative game-based collaborative decision-making method for multi-wheel tire forces considering cornering stiffness estimation errors is proposed. In this method, the longitudinal and lateral tire forces of the four wheels are treated as unified decision variables, while trajectory-tracking errors, vehicle stability requirements, and tire-force feasibility constraints are mapped into the tire-force decision space. Through probabilistic constraint transformation, the stochastic uncertainty induced by cornering stiffness estimation errors is converted into deterministic constraint bounds, which are further used to modify the tire-force feasible domain. On this basis, a stochastic cooperative game model is established to describe the cooperative relationship among front-wheel tracking correction, rear-wheel stability regulation, and all-wheel yaw coordination. The resulting distributed optimization problem is solved using an adaptive alternating direction method of multipliers. Simulation results demonstrate that the proposed method achieves coordinated multi-wheel tire-force allocation under complex constraints and balances trajectory-tracking accuracy, yaw stability, and tire-force feasibility while maintaining bounded primal and dual residuals within the prescribed co-simulation iteration budget.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_22"
    },
    {
      "id": "WePo2P.23",
      "paperId": "235",
      "title": "Hybrid Reinforcement Learning and PID Control for Quadrotor Navigation in Obstacle-Cluttered Environments",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "210220",
          "name": "Guerra Padilla, Giancarlo Eder",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "163114",
          "name": "Yu, Kee-Ho",
          "affiliation": "Chonbuk National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents an enhanced hybrid control architecture for quadrotor Unmanned Aerial Vehicles (UAVs) designed for robust path following and obstacle avoidance in cluttered environments. While Reinforcement Learning (RL) offers high-level adaptability, it often lacks the deterministic stability required for safety-critical flight. To address this, we propose an architecture that integrates a high-level RL agent with a traditional low-level cascaded PID controller. The RL agent is trained using a multi-objective reward function incorporating a potential field, which accounts for target attraction, path maintenance, and obstacle repulsion. This agent generates dynamic position displacement commands that are processed by the PID loops to maintain attitude stabilization and motor control. By offloading complex reactive guidance to the RL agent while retaining the high-frequency reliability of PID stabilization, the system achieves a balance between navigational intelligence and flight stability. The proposed model is validated through high-fidelity 3D trajectory simulations involving both static and dynamic obstacles. Preliminary analysis indicates that this hybrid approach significantly improves collision-avoidance rates and tracking precision compared to conventional end-to-end RL and pure PID methods, providing a scalable solution for autonomous UAV navigation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_23"
    },
    {
      "id": "WePo2P.24",
      "paperId": "271",
      "title": "Error-L_2 String Stability of Passive Vehicle Platoons with Multiple-Predecessor Following Topology",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526056",
          "name": "Jeong, Hyeonjeong",
          "affiliation": "Sookmyung Women's University"
        },
        {
          "id": "332955",
          "name": "Lee, Chanhwa",
          "affiliation": "Sejong University"
        },
        {
          "id": "233939",
          "name": "Joo, Youngjun",
          "affiliation": "Sookmyung Women's University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Information and Networking",
        "Control Theory and Applications"
      ],
      "abstract": "Vehicle platooning has been regarded as a cooperative driving strategy for connected and automated vehicles, since it can improve traffic efficiency by enabling automated vehicles to travel with small inter-vehicle distances. However, close formation driving makes the platoon vulnerable to string instability, where tracking errors propagate and amplify along the vehicle string. This paper investigates the error-L_2 string stability of passive vehicle platooning systems under a multiple-predecessor-following (mPF) topology and demonstrates that the error attenuation gain with respect to the first vehicle's error is bounded by 1/m. To validate the proposed analysis, a proportional-derivative controller is designed for a linearized longitudinal vehicle model to ensure passive velocity-output dynamics. Numerical simulations under varying numbers of predecessors demonstrate that the maximum error attenuation ratio decreases as m increases, consistently remaining below the theoretical bound.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_24"
    },
    {
      "id": "WePo2P.25",
      "paperId": "290",
      "title": "Frequency Sweep Linearization and Ranging Accuracy Improvement of FMCW LiDAR Using Optical Power Control",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525334",
          "name": "Kim, Heechan",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "524628",
          "name": "Yang, Yejun",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "100840",
          "name": "Park, KyiHwan",
          "affiliation": "GIST"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing",
        "Control Devices and Instruments"
      ],
      "abstract": "Frequency-modulated continuous-wave (FMCW) LiDAR precisely measures range using optical interference, offering robustness against external noise and sunlight in autonomous driving applications. Its ranging accuracy depends heavily on the optical frequency sweep linearity of the laser source. However, because the laser diode (LD) driver exhibits unpredictable variations due to temperature changes and aging, maintaining consistent linearity is challenging. To address this issue, this paper proposes a closed-loop control method that uses optical power as a feedback signal instead of directly measuring the optical frequency, which is difficult to access in the THz range. In the initial stage, a frequency-to-voltage converter (FVC)-based loop extracts a pre-distortion signal that ensures a linear sweep, while the synchronized ideal optical-power profile is stored as the reference profile. In the operation stage, this pre-distortion signal is applied to the LD driver and the closed-loop controller tracks the reference profile using the real-time optical-power signal, thereby compensating for time-varying drift in the sweep. Experimental results verify that the proposed method maintains sweep linearity under thermal variation during continuous operation, significantly improving the ranging performance of the LiDAR system.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_25"
    },
    {
      "id": "WePo2P.26",
      "paperId": "318",
      "title": "Robust Trajectory Tracking of Wheeled Mobile Robots Via Integrated Time Delay Control and Model Predictive Control",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "300215",
          "name": "Kim, Sung Jae",
          "affiliation": "Korea Institute of Robotics & Technology Convergence"
        },
        {
          "id": "409258",
          "name": "Kim, Dong Ju",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "409329",
          "name": "Lee, Munhaeng",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "163928",
          "name": "Kim, Kyoung Ho",
          "affiliation": "Korea Institute of Robotics & Technology Convergence"
        },
        {
          "id": "527381",
          "name": "Gwon, Taewoong",
          "affiliation": "Korea Institute of Robotics & Techonology Convergence"
        },
        {
          "id": "242626",
          "name": "Sohn, Dongseop",
          "affiliation": "Korea institute Of robot & Convergence"
        },
        {
          "id": "131893",
          "name": "Suh, Jinho",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "This paper proposes a time-delay-estimation-integrated model predictive control (TDE-MPC) framework for robust trajectory tracking of wheeled mobile robots under lumped uncertainties. A simplified nominal model is used for MPC prediction, while model mismatch, friction, and external disturbances are treated as lumped uncertainties. The uncertainty term is estimated using time-delay estimation and directly incorporated into the error-state MPC prediction model as an additional compensation term. To improve recursive feasibility and practical closed-loop stability, terminal ingredients are introduced, including a terminal cost and a tightened terminal set. The proposed method is evaluated through trajectory tracking simulations of a differential-drive mobile robot and compared with a nominal MPC that does not include the TDE term. Simulation results show that the proposed TDE-MPC improves position and heading tracking performance under disturbed conditions. These results demonstrate that the proposed approach enhances robustness while preserving the constraint-handling capability of MPC.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_26"
    },
    {
      "id": "WePo2P.27",
      "paperId": "324",
      "title": "LiDAR-Based Obstacle Avoidance and Dynamic Positioning for Autonomous Berthing of an Overactuated USV",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "456991",
          "name": "Bang, Hyuntae",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525792",
          "name": "Thai, Ba Hoa",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525406",
          "name": "Jiwoong, Ha",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "523894",
          "name": "Yun, YoungJun",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525797",
          "name": "Choi, Kyungwon",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525798",
          "name": "Hong, Seungjae",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "293856",
          "name": "Youn, Wonkeun",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents LiDAR-based real-time obstacle avoidance and pre-docking dynamic positioning (DP) for autonomous berthing of an overactuated unmanned surface vehicle (USV). During waypoint following, 3D LiDAR point clouds are projected onto a two-dimensional plane, where candidate trajectories are evaluated for collision risk to determine an avoidance heading correction. During pre-docking DP, a position controller maintains the vehicle’s position and heading. The docking approach begins only if the docking target is detected at the current sample, the instantaneous heading error is within its threshold, and the windowed position-stability condition is met. The methods were integrated into a five-phase autonomous berthing sequence and validated through three outdoor basin trials at distinct target berths, demonstrating obstacle avoidance during transit and stable pre-docking positioning.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_27"
    },
    {
      "id": "WePo2P.28",
      "paperId": "346",
      "title": "Simulator-In-The-Loop MPC Weight Tuning Using LLM-Based Search and Bayesian Optimization",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "372876",
          "name": "Ji, Kyoungtae",
          "affiliation": "Hanyang University"
        },
        {
          "id": "410551",
          "name": "Won, Dongyeol",
          "affiliation": "Hanyang University"
        },
        {
          "id": "349261",
          "name": "Han, Kyoungseok",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents a simulator-in-the-loop study of model predictive control (MPC) weight calibration for autonomous vehicle path-following using a high-fidelity closed-loop simulation environment. With the controller structure fixed, the optimization target is a four-dimensional MPC weight vector for lateral tracking, heading response, steering effort, and steering smoothness. Each candidate is evaluated by a simulation objective that penalizes road departure, counted cone contacts, and tracking error. Under a common 50-trial budget, the study compares Latin-hypercube sampling, random search, Bayesian optimization (BO), and LLM-based search over five independent repetitions. The results show complementary behavior: LLM-based search reaches hit-free candidates early in four of five repetitions, while BO finds the lowest objective value when its exploration reaches a useful region. A 4096-sample Sobol-based landscape analysis finds only seven hit-free samples, indicating that feasible weight regions are sparse. These results suggest that LLM-based search is effective for rapid feasibility seeking, whereas numerical exploration remains important for discovering less intuitive weight regions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_28"
    },
    {
      "id": "WePo2P.29",
      "paperId": "351",
      "title": "MPC-Based Lateral Path Tracking Control for Autonomous Vehicles Using UKF-Estimated Tire Lateral Forces under Varying Road Friction",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527738",
          "name": "Kim, Seungil",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "527748",
          "name": "Kim, Seongjin",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "527749",
          "name": "Choi, Hyungjeen",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "536521",
          "name": "Noh, Kihan",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "527756",
          "name": "Hwang, Sung-Ho",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents an MPC-based lateral path-tracking controller combined with an unscented Kalman filter (UKF)-based equivalent front and rear lateral force estimator. The proposed method aims to improve path-tracking performance under varying road-friction conditions. A 2-DOF bicycle model is used to describe the vehicle lateral dynamics, and lateral and heading errors are added to the model for path tracking. A UKF-based estimator is designed to reduce the model mismatch caused by lateral-force variations. It estimates the equivalent front and rear axle lateral forces using the measured yaw rate, lateral acceleration, and yaw acceleration. The estimated forces are incorporated into the MPC prediction model to reflect changes in the vehicle lateral dynamics. The proposed method is evaluated in a CarSim–MATLAB/Simulink co-simulation environment. The estimator achieves an average coefficient of determination of approximately 0.99. To validate the proposed MPC-based path tracking controller, an ISO 3888-2 double lane change maneuver is conducted under laterally varying road friction. Compared with conventional MPC, the proposed controller reduces the RMS and peak lateral position errors by 45.1% and 74.2%, respectively.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_29"
    },
    {
      "id": "WePo2P.30",
      "paperId": "354",
      "title": "Expert Interpolation for State-Based Yaw-Error Prediction in GNSS-Denied Vehicle Localization",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463149",
          "name": "Jeong, Jaewon",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "317444",
          "name": "Choi, Woo Young",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes a deterministic expert interpolation layer for dead-reckoning-based vehicle localization under Global Navigation Satellite System (GNSS) outage conditions. Dead reckoning can maintain continuous localization using onboard vehicle motion signals; however, small yaw-rate errors accumulate through recursive heading integration and progressively increase trajectory deviation. Moreover, the influence of the accumulated yaw error on the trajectory varies with the vehicle motion state, which may limit the ability of a single-output prediction structure to sufficiently represent different driving regimes. To address this problem, four parallel experts generate candidate yaw-error predictions from a shared temporal representation, and their outputs are combined using deterministic interpolation weights computed from the current state in the velocity and yaw-rate space. The resulting yaw-error estimate is used to compensate the dead-reckoning heading and reconstruct the vehicle trajectory. Real-vehicle experiments were conducted under low-speed and high-speed GNSS outage scenarios to analyze variations in expert contributions according to the vehicle motion state and to compare the reconstructed vehicle trajectories with those obtained using other methods. The experimental results show that the proposed expert interpolation layer adjusts the expert combination according to different driving regimes and reduces yaw error and trajectory deviation compared with conventional dead reckoning and a single-output prediction model.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_30"
    },
    {
      "id": "WePo2P.31",
      "paperId": "355",
      "title": "NLoS Object Estimation Via Road Convex Mirror Using Camera and LiDAR Sensor Fusion for Autonomous Driving",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463156",
          "name": "Kim, Min Gyu",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "317444",
          "name": "Choi, Woo Young",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper proposes a Non-Line-of-Sight (NLoS) object estimation method that leverages a road convex mirror with camera and 3D Light Detection And Ranging (LiDAR) sensor fusion. The approach begins with identifying NLoS objects through a convex mirror and utilizes the virtual LiDAR point cloud formed by the reflector for NLoS object estimation. A reflection error compensation model is designed based on the correlation between the reflection region on the reflector and the virtual point cloud recovery error. We perform object data association and fusion to mitigate estimation ambiguities caused by simultaneously acquired LoS and NLoS sensing data for the same object and discontinuities from changes in sensing path. The resulting data is then processed by an Interacting Multiple Model-Kalman Filter (IMM-KF), which incorporates the different error characteristics of LoS and NLoS sensing data. Scenario-based experiments demonstrate that the proposed method outperforms conventional methods in NLoS object estimation and shows stable estimation performance in environments where LoS and NLoS sensing data coexist and the sensing path changes over time.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_31"
    },
    {
      "id": "WePo2P.32",
      "paperId": "382",
      "title": "Dual-Track Gaussian Splatting for Dynamic Urban Scene Reconstruction",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527986",
          "name": "Kang, DoHun",
          "affiliation": "Hankuk University of Foreign Studies"
        },
        {
          "id": "302955",
          "name": "Jang, Wonje",
          "affiliation": "Hankuk University of Foreign Studies (HUFS)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Three-dimensional (3D) map generation is a core component of autonomous driving, yet recovering an accurate static background in urban environments crowded with dynamic objects is difficult in dynamic urban scenes. Existing approaches fall broadly into two categories. The 3R-family methods—such as DUSt3R, MASt3R, and MonST3R—operate on RGB images alone, but their ability to handle dynamic objects is only auxiliary or partial. Sensor-fusion-based methods, such as AD-GS and IDSplat, achieve high-quality static–dynamic separation, but they presuppose demanding sensor requirements, relying on LiDAR depth and GPS position information. In this paper, we propose a Dual-Track Gaussian Splatting pipeline that narrows the gap toward sensor-fusion based urban 3D reconstruction using only a monocular RGB camera. The proposed method predicts monocular depth and estimates ego-motion with a deep-learning-based SLAM that is robust to dynamic objects. Moving vehicles are identified by combining YOLO-based vehicle segmentation with optical flow, and they are stably tracked using a consistent-SE(3) tracking scheme. Experiments on VKITTI show that the proposed RGB-only pipeline improves PSNR from 14.43 dB and 14.06 dB for MASt3R and MonST3R to 18.40 dB. On nuScenes, replacing the GPS/IMU ego-pose with the proposed camera-only estimation costs only 0.13 dB in held-out PSNR (19.53 dB → 19.40 dB), and qualitative results further show that the method suppresses vehicle-induced ghosting artifacts without using LiDAR or GPS.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_32"
    },
    {
      "id": "WePo2P.33",
      "paperId": "397",
      "title": "A Feasibility Study of Imitation Learning for Trajectory Tracking Control: Distillation of Optimal-Control Experts with Universal Output in CARLA",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528097",
          "name": "Park, Myungwook",
          "affiliation": "ETRI(Electronics and Telecommunications Research Institute)"
        },
        {
          "id": "390596",
          "name": "KyoungWook, Min",
          "affiliation": "ETRI"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "We assess the feasibility of imitation learning (IL) for autonomous trajectory tracking. We construct a hybrid expert combining LQR (lateral) and constrained MPC (longitudinal) — each expert’s strength in its own domain — and distill it into a single LSTM (Long Short-Term Memory) Hybrid neural network (NN) (1.12M params) that outputs a vehicle-agnostic curvature target and longitudinal acceleration; a per-vehicle executor then produces the actuator steering angle. To remove the hidden bias of tuning the reference trajectory to one expert’s envelope, we restore the LQR-optimal envelope to the trajectory generator and align the MPC’s constraints to it. The distilled NN inherits LQR’s lateral precision and MPC’s longitudinal collision-avoidance behavior in a single policy, deploys across multiple electric-vehicle platforms without re-training, and validates planner abstraction through a 12–23% drop in Hard collisions with no architecture change. Residual gaps on unseen distributions (cross-map, narrow lateral coverage, simulator dynamics) are quantified and addressable via label smoothing, augmentation, and multi-town data.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_33"
    },
    {
      "id": "WePo2P.34",
      "paperId": "440",
      "title": "Transformer-Based Future Parameter-Scheduled LPV-MPC with Application to Autonomous Vehicle Lateral Control",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "347966",
          "name": "Cho, Seong Min",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "317444",
          "name": "Choi, Woo Young",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper proposes a Transformer-based future parameter-scheduled linear parameter-varying (LPV)-MPC framework for autonomous vehicle lateral control. The Transformer predicts a future parameter for LPV-MPC, such as longitudinal velocity, using past parameter data, including velocity and road-geometry information. The predicted parameter is then used as a future scheduling input to construct the LPV-MPC prediction model over the control horizon. Since the optimization problem is still solved in the MPC layer, the proposed method preserves the constraint-handling capability of LPV-MPC while reducing the dependence on ideal future velocity information. The proposed method is evaluated in a time-varying autonomous-driving scenario including clothoid road-curvature variation and a single impulse disturbance. It is compared with LTI-MPC, ideal time-varying (TV)-MPC, and autoregressive integrated moving average model (ARIMA)-based future parameter-scheduled LPV-MPC. The test results show that the proposed method achieves lateral tracking performance close to the ideal TV-MPC.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_34"
    },
    {
      "id": "WePo2P.35",
      "paperId": "447",
      "title": "Constrained Optimization-Based Yaw-Rate Reference Map Generation for Active Rear Steering Control of Four-Wheel Steering Vehicles",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526207",
          "name": "Ryu, Myeongseok",
          "affiliation": "Korea Institute of Science and Technology (KAIST)"
        },
        {
          "id": "528253",
          "name": "Hwang, Donghyun",
          "affiliation": "HyundaiMotorsCompany"
        },
        {
          "id": "528254",
          "name": "Yoon, Young Sik",
          "affiliation": "Hyundai Kia Motor Company"
        },
        {
          "id": "196257",
          "name": "Choi, Kyunghwan",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "The effectiveness of active rear steering (ARS) control for four-wheel steering (4WS) vehicles is widely recognized in the automotive industry. At low speeds, ARS control can enhance maneuverability by steering the rear wheels in the opposite direction to the front wheels, reducing the turning radius. In contrast, at high speeds, ARS control can improve stability by steering the rear wheels in the same direction as the front wheels, preventing oversteer behavior. However, the performance of ARS control is often limited by the reference model used to generate the desired yaw rate, which is typically derived from a steady state of front-wheel steering (FWS) vehicle model. In this paper, we conduct a numerical analysis to construct an optimal yaw rate reference map for ARS control by formulating a constrained optimization problem. In the optimization problem, constraints are imposed to ensure that the vehicle operates within safe limits at steady state. Numerical simulations demonstrate the effectiveness of the proposed method in providing an optimal yaw rate reference map for ARS control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_35"
    },
    {
      "id": "WePo2P.36",
      "paperId": "597",
      "title": "Semantic Behavior Reasoning for Autonomous Driving on a TOSM-Based Semantic Map",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "319790",
          "name": "An, Ye-Chan",
          "affiliation": "Sung Kyun Kwan University"
        },
        {
          "id": "319841",
          "name": "Choi, Junhyeon",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "463561",
          "name": "Eum, Tae Wook",
          "affiliation": "SungKyunKwan University"
        },
        {
          "id": "461769",
          "name": "Kim, Jin-Ho",
          "affiliation": "SungKyunKwan University"
        },
        {
          "id": "319832",
          "name": "Kuc, Tae-Yong",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems",
        "Information and Networking"
      ],
      "abstract": "Autonomous vehicles on complex urban roads must reason not only about geometry but also about the semantic meaning of the surrounding elements to decide what to do. We present a semantic behavior-reasoning approach in which a single Triplet Ontological Semantic Model (TOSM) representation describes environmental elements, their relations, and the ego-vehicle state over a semantic high-definition (HD) map. On this representation, Semantic Web Rule Language (SWRL) rules spanning behavior, regulation, event, and path reasoning infer context-appropriate maneuvers such as yielding, braking, and lane changes. To ensure correctness, the inference is cross-validated between the Pellet description-logic reasoner, which runs the SWRL rules over the Web Ontology Language (OWL) ontology, and an independent forward-chaining engine that re-implements the same rules. The two are required to produce the same conclusions. On a TOSM semantic HD map built from real Busan driving data, the two implementations agree on every behavioral conclusion across the evaluated scenarios, and the cross-validation surfaces an under-specified premise that a single reasoner would have hidden.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_36"
    },
    {
      "id": "WePo2P.37",
      "paperId": "619",
      "title": "Multimodal Trajectory Planning Using Turning Circle-Based Control Barrier Functions",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "242803",
          "name": "Lee, Changyu",
          "affiliation": "Kongju National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a guide path-free multimodal trajectory planning framework that integrates model predictive control (MPC) with a turning circle-based control barrier function (TC-CBF). Unlike Euclidean distance-based CBFs that rely on proximity alone, the TC-CBF evaluates the clearance of the left- and right-turning circles set by the vehicle's maximum yaw rate, explicitly encoding feasible left- and right-side avoidance. This lets the optimizer discover topologically distinct trajectory modes within a single optimization layer, without a global reference path, mitigating the local-minimum and deadlock problems of standard MPC while remaining efficient. Deterministic and Monte Carlo simulations show higher success rates, better trajectory quality, and lower computation than ED-CBF-based MPC and guide path-based MPC.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_37"
    },
    {
      "id": "WePo2P.38",
      "paperId": "633",
      "title": "Do Snow-Removal Filters Also Remove Road Spray? a Zero-Tuning Transfer Benchmark on LiDAR Point Clouds",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "464956",
          "name": "Choi, Jinhyeok",
          "affiliation": "Korea Institute of Industrial Technology (KITECH)"
        },
        {
          "id": "147191",
          "name": "Kim, Jiwoong",
          "affiliation": "Korea Institute of Industrial Technology(KITECH)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing",
        "Robot Vision"
      ],
      "abstract": "LiDAR sensors have been widely used in autonomous driving due to their ability to accurately perceive the surrounding environment. However, in adverse weather such as heavy rain, the point cloud is severely degraded by road spray, the water mist thrown up by the leading vehicle, which reduces the reliability of autonomous driving. While snow removal has been widely studied, road spray has received little attention. We observe that road spray, like snow, appears as low-intensity LiDAR returns, and therefore ask whether existing snow-removal filters that exploit this low- intensity cue can be transferred to road spray without any pipeline modification or parameter tuning. We benchmark four conventional intensity-based snow-removal filters, together with an adaptive, unsupervised pipeline (ASDR + C-GLP) that we previously developed, on the SemanticSpray dataset. The filters transferred to widely varying degrees, and even the best result was moderate: our previously developed pipeline achieved the highest F1-score while preserving the leading vehicle and running in real time. Low-intensity snow-removal filters thus transfer to road spray, but only partially.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_38"
    },
    {
      "id": "WePo2P.39",
      "paperId": "642",
      "title": "DBoW Descriptor-Based Map Reuse SLAM",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "175879",
          "name": "Kim, Byoungkyun",
          "affiliation": "KETI"
        },
        {
          "id": "104763",
          "name": "Kim, Jungho",
          "affiliation": "Korea Electronics Tech. Inst"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Simultaneous Localization and Mapping (SLAM) based on a 3D map is essential for establishing exploration paths and monitoring environmental changes during indoor drone operations. This paper presents a LiDAR-based map reuse method for autonomous drone navigation and change detection in indoor environments. During the initial LiDAR-Inertial Odometry (LIO)-based SLAM process, DBoW descriptors are extracted from LiDAR frames and stored for subsequent use. During re-flight, the previously constructed map is reused to estimate the drone’s initial pose, enabling SLAM to be initialized without constructing a new map from scratch. Map reuse SLAM is achieved by performing loop closure using the stored DBoW descriptors together with the previously generated map data. The proposed framework is validated through experiments conducted in various indoor environments, demonstrating the feasibility and effectiveness of the proposed map reuse approach.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_39"
    },
    {
      "id": "WePo2P.40",
      "paperId": "663",
      "title": "XAI-Guided Utility Function Design for Human-Like Decision-Making in Lane-Merging Scenarios",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532192",
          "name": "Lee, Seunghyun",
          "affiliation": "Changwon National University"
        },
        {
          "id": "528322",
          "name": "Gim, Juhui",
          "affiliation": "Changwon National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper proposes a human-inspired utility function for decision-making in lane-merging scenarios using explainable AI. Conventional utility functions are often designed based on heuristic assumptions and fixed weighting parameters. As a result, they may not reflect how human drivers adjust their preferences according to surrounding traffic condi-tions. The proposed method extracts factors related to human driver decision-making from real-world driving data us-ing XGBoost-SHAP and incorporates them into the safety utility. The XGBoost model learns the relationship between driving-related features and the future heading angle, which is used as an observable proxy for the initial lateral ma-neuver response associated with merging. The proposed utility function is applied to a Stackelberg game-based driver model for validation. Decision-level validation results show that the model using the proposed utility function generates lane-keeping and lane-merging decisions that are more similar to those of human drivers than those generated by a conventional utility-based model. These results suggest that factors related to human driver decision-making can be quantitatively incorporated into autonomous driving decision algorithms, thereby supporting more human-like deci-sion-making.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_40"
    },
    {
      "id": "WePo2P.41",
      "paperId": "293",
      "title": "Magnetically Actuated Capsule Robot for Multi-Site Gastrointestinal Therapy Using Deployable Therapeutic Sheets",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "289041",
          "name": "Lee, Jihun",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        },
        {
          "id": "101183",
          "name": "Park, Sukho",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Gastrointestinal (GI) diseases remain challenging to treat because of the complex structures and limited accessibility of the GI tract. In this study, we propose a magnetically actuated capsule-based therapeutic platform for targeted multi-site treatment within the GI tract. The proposed system consists of a magnetically actuated capsule robot equipped with deployable therapeutic sheets (TheraSs) and a real-time imaging module for active navigation and targeted delivery. The TheraS has a multilayer structure enabling self-unrolling and conformal attachment to curved tissue surfaces. Experimental results demonstrated effective hemostatic performance and successful multi-site delivery in ex vivo environments, highlighting the potential of the proposed system as a therapeutic platform for GI diseases.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_41"
    },
    {
      "id": "WePo2P.42",
      "paperId": "311",
      "title": "Temporal Variance-Based Post-Processing for rPPG-Based Blood Pressure Estimation",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "519938",
          "name": "Park, Dogyun",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "539558",
          "name": "Cho, Yeonwoo",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "402584",
          "name": "Kwon, Nam Kyu",
          "affiliation": "Yeungnam University"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Remote photoplethysmography (rPPG)-based blood pressure (BP) estimation enables continuous physiological monitoring in a non-contact manner; however, unstable window-level predictions may occur due to illumination changes, motion, and signal quality degradation. In this study, we propose a post-processing method that applies temporal variance-based filtering to the outputs of a long short-term memory-based BP estimation framework using rPPG features. The proposed method defines four consecutive predictions in each subject-specific systolic blood pressure (SBP) and diastolic blood pressure (DBP) prediction sequence as a chunk, and uses the prediction variance within each chunk to identify temporally unstable predictions. Predictions judged to be stable in both SBP and DBP sequences are then used as filtered predictions. In experiments using a public rPPG-based BP dataset with 10 repeated trials, the filtered predictions retained an average of 76.6% of the unfiltered predictions while showing lower mean absolute error and error standard deviation than the unfiltered predictions. These results suggest that the proposed post-processing method may help reduce error and error variability in rPPG-based BP estimation results.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_42"
    },
    {
      "id": "WePo2P.43",
      "paperId": "485",
      "title": "SpO2 Estimation Using Remote Photoplethysmography with Pulse Projection Gain",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "402569",
          "name": "Jo, Hyojin",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "539492",
          "name": "Lee, JeongWoo",
          "affiliation": "YeungnamUniversity"
        },
        {
          "id": "402584",
          "name": "Kwon, Nam Kyu",
          "affiliation": "Yeungnam University"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Remote photoplethysmography (rPPG)-based oxygen saturation (SpO2) estimation has been investigated as a non-contact alternative to conventional pulse oximetry. Most camera-based SpO2 methods use the ratio-of-ratios (RoR) principle, where the normalized pulsatile variation of each RGB channel is computed from its AC and DC components. However, model-based rPPG algorithms such as plane-orthogonal-to-skin (POS) and CHROM are mainly used for pulse signal extraction, and their connection to RoR-based SpO2 estimation remains less direct. This paper proposes a simple gain-based RoR approach that links model-based rPPG signal extraction with SpO2 estimation. Each RGB channel signal is modeled as a combination of a component synchronized with a pulse basis and a residual component, and the AC related feature is redefined as a pulse-synchronous gain. The gain is obtained as the projection coefficient of each channel signal onto the pulse basis. A POS-based rPPG signal is used as the surrogate pulse basis. The proposed method was evaluated on the PURE dataset using record-specific calibration and three regression models. Experimental results show comparable or improved performance over conventional RoR, suggesting the feasibility of gain RoR as an alternative feature for rPPG-based SpO2 estimation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_43"
    },
    {
      "id": "WePo2P.44",
      "paperId": "513",
      "title": "Design of ToesiFleX, a Soft Robotic Foot Drop Exosuit, with Experimental Validation of Terrain-Slope Recognition and Dorsiflextion Actuation",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528554",
          "name": "Banula, Mineth",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "528551",
          "name": "Siriwardana, Kavin",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "528575",
          "name": "Goonaratne, Kishara",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "212029",
          "name": "Kulasekera, Asitha Lakruwan",
          "affiliation": "Department of Mechanical Engineering, University of Moratuwa"
        },
        {
          "id": "202943",
          "name": "Ranaweera, Pubudu",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "113254",
          "name": "Gopura, R.A.R.C.",
          "affiliation": "Department of Mechanical Engineering"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Exoskeleton Robot",
        "Rehabilitation Robot"
      ],
      "abstract": "This paper presents ToesiFleX, an adaptive soft robotic exosuit intended for foot drop assistance on level, inclined, and declined surfaces. The system possesses a lightweight cable-driven dorsiflexion architecture consisting of a sandal-based foot interface, a distal cable anchor, Bowden cable transmission, routing support, a shank pad, and a shank-mounted actuation unit. The waist-mounted terrain-slope detection module includes two Time-of-Flight sensors and an inertial measurement unit to estimate the upcoming planar terrain angle. Bench-top evaluation was performed using a dummy-limb prototype, an actuated waist-motion simulator, and an adjustable ramp. Tests of the terrain-slope recognition method were conducted on ramp angles from -15° to 15°, resulting in tolerance-based accuracy above 90%. The cable-driven dorsiflexion subsystem was subsequently evaluated on the dummy limb using a foot-mounted IMU. Across the tested terrain conditions, the actuation system achieved an average tolerance-based accuracy of 76.6% within ±3° of the required dorsiflexion profile. These experiments validate the terrain-sensing and dorsiflexion-actuation subsystems at the proof-of-concept level, while human-subject performance remains to be evaluated.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_44"
    },
    {
      "id": "WePo2P.45",
      "paperId": "655",
      "title": "Integrated Focused Ultrasound and Electromagnetic Actuation System for Enhanced Magnetic Drug Delivery across an in Vitro Blood-Brain Barrier Model",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "312264",
          "name": "Kee, Hyeonwoo",
          "affiliation": "DGIST"
        },
        {
          "id": "233829",
          "name": "Lee, Hyoryong",
          "affiliation": "DGIST"
        },
        {
          "id": "233234",
          "name": "Park, Joowon",
          "affiliation": "University of Ulsan"
        },
        {
          "id": "101183",
          "name": "Park, Sukho",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Robotic Applications"
      ],
      "abstract": "Glioblastoma treatment remains limited by the blood-brain barrier (BBB), which suppresses the accumulation of systemically administered anticancer drugs at brain tumor lesions. Focused ultrasound (FUS) with microbubbles can reversibly open the BBB, but conventional magnetic drug targeting based on static magnetic fields can induce magnetic nanoparticle (MNP) chain formation, reducing penetration through the opened barrier. This paper presents a compact conference summary of an integrated focused ultrasound and electromagnetic actuation (FUEM) system for enhanced drug-loaded MNP delivery. The FUS unit generated a focal acoustic field and opened a bEnd.3-MBVP in vitro BBB model using 1 MHz ultrasound and microbubbles. The 8-coil EMA unit produced 0.1 T magnetic fields and dynamic rotating fields to trap MNPs while breaking chains. Under BBB-opened dynamic magnetic field operation, MNP penetration increased by approximately seven-fold compared with the closed-BBB/no-field control, and doxorubicin-loaded MNP delivery reduced U-373MG glioblastoma cell viability to 28.51%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_45"
    },
    {
      "id": "WePo2P.46",
      "paperId": "661",
      "title": "Multimodal Physiological Analysis of Food Cue Reactivity under High and Low-Calorie Menu Contexts",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532153",
          "name": "Daeun, Kim",
          "affiliation": "Hanyang University"
        },
        {
          "id": "532186",
          "name": "Sungkean, Kim",
          "affiliation": "Hanyang University"
        },
        {
          "id": "532157",
          "name": "Won Suk, Chang",
          "affiliation": "HumanCare Electro-Medical Device Research Center, Korea Electrotechnology Research Institute"
        },
        {
          "id": "532131",
          "name": "Jaeyoung, Shin",
          "affiliation": "Korea National University of Transportation"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Visual and textual cues in digital environments significantly influence individual food-choice responses. This study examined whether the relationship between subsequent food-choice behavior and brain activation in the prefrontal cortex (PFC) differed between high- and low-calorie virtual food-choice conditions. Seventeen healthy adults performed a food-choice task comprising high- and low-calorie main-menu conditions. During the task, brain activation in the PFC was measured using a 15-channel functional near-infrared spectroscopy (fNIRS) device, and eye movements were simultaneously recorded. Raw optical intensity data were converted to concentration changes in oxygenated hemoglobin (ΔHbO), and the mean ΔHbO within the 20–30 s analysis window was calculated for each block and channel. For each block, the opposite choice rate (OCR) was calculated as the proportion of side-menu choices made in the calorie direction opposite to that of the preceding main menu. For analysis, linear mixed-effects models were used to examine the interaction between the main-menu condition and OCR, with a random intercept for participant. The main-menu condition × OCR interaction remained significant after false discovery rate correction at Ch13, 14, and 15 (q < 0.05). The positive interaction coefficients indicated that the association between OCR and ΔHbO was more positive in the high-calorie main-menu condition than in the low-calorie condition. These findings indicate that the relationship between subsequent food-choice behavior and prefrontal hemodynamic responses differs according to the calorie condition of the preceding main-menu choice.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_46"
    },
    {
      "id": "WePo2P.47",
      "paperId": "23",
      "title": "Heading-Adaptive Anisotropic DBSCAN Clustering for Radar Based Vehicle Detection System",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "460437",
          "name": "Wang, Yooseung",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "523343",
          "name": "Im, Junyoung",
          "affiliation": "KETI"
        },
        {
          "id": "461426",
          "name": "Jang, Junhyek",
          "affiliation": "KETI"
        },
        {
          "id": "461423",
          "name": "An, Byoungman",
          "affiliation": "KETI"
        },
        {
          "id": "461431",
          "name": "Shin, Daekyo",
          "affiliation": "KETI"
        },
        {
          "id": "461427",
          "name": "Jang, Soohyun",
          "affiliation": "KETI"
        }
      ],
      "keywords": [
        "Civil and Urban Control Systems",
        "Industrial Applications of Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "Accurate vehicle detection from a roadside radar is essential for secondary accident prevention in intelligent transportation systems. Traditional clustering methods like DBSCAN rely on isotropic distance metrics that fail to capture elongated vehicle geometries when vehicles are oriented at varying angles relative to the sensor. We propose a Heading-Adaptive Anisotropic DBSCAN (HAA-DBSCAN) algorithm that incorporates vehicle orientation directly into the clustering process. Our method combines temporal motion vectors with spatial PCA for heading estimation, and then replaces the standard Euclidean distance with an orientation-aligned elliptical distance metric to prevent merging of closely-spaced vehicles with dissimilar orientations. DBSCAN was selected as the clustering baseline after comparative evaluation against K-Means and agglomerative clustering. Experimental validation on real-world roadside radar data demonstrates successful segmentation of vehicles with different orientations. In addition, CPU-only runtime evaluation on a Raspberry Pi 4 achieves 14.396 ms/output, corresponding to 69.5 FPS, demonstrating the feasibility of the proposed method for real-time embedded roadside deployment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_47"
    },
    {
      "id": "WePo2P.48",
      "paperId": "138",
      "title": "Development of an Economical EOL Testing System for IPMSM Production Lines Using an MCU and Sensors",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525785",
          "name": "Kim, Do-Yun",
          "affiliation": "Anyang University"
        },
        {
          "id": "525787",
          "name": "Park, Chul-Gyun",
          "affiliation": "Department of Information Electric and Electronic Engineering, Anyang University"
        },
        {
          "id": "525789",
          "name": "Lee, Boong-Joo",
          "affiliation": "Department of Electronic Engineering Namseoul University"
        },
        {
          "id": "525791",
          "name": "Seo, Sam-Jun",
          "affiliation": "Anyang University"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Process Control Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper proposes an economical and efficient End-of-Line (EOL) testing system for final quality assurance in Interior Permanent Magnet Synchronous Motor (IPMSM) production lines for eco-friendly vehicles. Conventional commercial EOL equipment utilizes high-voltage insulation testers, three-phase power analyzers, expensive National Instruments (NI) data acquisition (DAQ) hardware, and LabVIEW-based systems, which entail extremely high deployment costs (CAPEX) and severe reliance on foreign vendors. In this study, these expensive instruments are completely replaced with a general-purpose high-performance microcontroller unit (MCU), specifically TI's TMS320F28377, LEM voltage sensors (LV25-P), and an Analog Devices RDC (AD2S1210) chip. A low-cost architecture is realized by optimizing the MCU’s internal ADC channels and dedicated hardware circuits. Furthermore, a process parallelization algorithm is developed to simultaneously execute the back-electromotive force (back-EMF) measurement and the resolver offset measurement under a high-speed driving condition of 1000 rpm, which were previously conducted sequentially. The proposed system was deployed and validated on an active IPMSM mass-production line of a leading global automotive powertrain manufacturer. The results demonstrate that the system maintains measurement accuracy equivalent to or higher than that of high-end commercial equipment while reducing the total EOL inspection tact time from 65 seconds to 55 seconds, achieving a breakthrough 15.4% increase in manufacturing productivity.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_48"
    },
    {
      "id": "WePo2P.49",
      "paperId": "193",
      "title": "Analysis of Force Slew Rate in Unbiased Control of Asymmetric Active Magnetic Bearings",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525989",
          "name": "Yang, Junsang",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "100697",
          "name": "Noh, Myounggyu D.",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Industrial Applications of Control"
      ],
      "abstract": "Active magnetic bearings (AMBs) are widely used for high-speed rotating machines due to superior reliability and efficiency. Unlike symmetric AMBs with bias currents, asymmetric bearings use unbiased control which may lead to a force slew-rate limitation. In this paper, we derive the force slew rate of asymmetric unbiased AMBs in terms of coil currents and phase voltages. Since the voltages are limited by the DC-link voltage of the inverter, we provide a lower bound of the coil currents ensuring the required force slew rate. To validate the force slew rate analysis of the asymmetric unbiased bearing, a test rig is setup consisting of a prototype compressor and 9-pole asymmetric bearings. Force slew rate is obtained from the measured voltages and currents. It matches well with the numerically computed force slew rate using the electromagnetic forces, thus validating the analysis presented in the paper.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_49"
    },
    {
      "id": "WePo2P.50",
      "paperId": "423",
      "title": "Velocity and Formation Planning with Slip and Tip-Over Avoidance for Load-Bearing Cooperative Transport",
      "session": "WePo2P",
      "date": "2026-10-28",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "319790",
          "name": "An, Ye-Chan",
          "affiliation": "Sung Kyun Kwan University"
        },
        {
          "id": "271372",
          "name": "In, Gungyo",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "505221",
          "name": "Kim, Byeongjun",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "319832",
          "name": "Kuc, Tae-Yong",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper proposes a velocity and formation planning method with slip and tip-over avoidance for load-bearing cooperative transport, in which two non-holonomic mobile robots carry a rigid object held only by friction on their top platforms. The proposed method combines a Coulomb friction-circle (no-slip) limit and a zero-moment-point (ZMP) tip-over limit into a single lateral-acceleration bound. On top of this bound, a time-efficient velocity profile is generated via path--velocity decomposition, allowing the payload to be carried quickly while respecting the contact constraints. Unlike existing kinematic formation controllers that determine the admissible speed only empirically, the proposed method explicitly reflects the contact-level dynamics and adapts the transport speed to the local path curvature. Additionally, it reveals a formation--tip-over coupling: the in-line formation loads the weak roll axis during cornering, while the parallel formation loads the stable load-shift axis. The planned trajectories are checked by an independent rigid-body re-simulation, which also exposes an object-rotation failure mode invisible to point-mass analysis. Through experiments on warehouse-like and tight-corner scenarios in simulation, the proposed method keeps payload slip below the threshold and prevents tip-over across the tested friction range, while reducing transport time compared to the constant-velocity baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo2p_50"
    },
    {
      "id": "WePo3P.1",
      "paperId": "206",
      "title": "Design, Implementation, and Industrial Deployment of a Smart Vision-Based AI Defect Inspection System: A Systems Engineering-Based Approach for Hot-Rolling Processes",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526081",
          "name": "Shin, Kee-Young",
          "affiliation": "Robotics & AI Research Group, POSCO Technical Research LABs"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Industrial Applications of Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents the design, implementation, and industrial deployment of the Smart Vision-based AI Defect Inspection System (S-VADIS), developed through a traceability-driven systems engineering approach for side-edge defect inspection in hot-rolling processes. To ensure architectural consistency and robustness, the system was developed using a traceability-driven systems engineering methodology, where stakeholder requirements were systematically translated into verifiable system requirements and realized through a well-defined functional and implementation architecture. The S-VADIS enables reliable, full-coverage image acquisition under harsh industrial conditions, including high-speed operation and ambient temperatures exceeding 750 °C. To maintain production throughput while ensuring high inspection accuracy, the system employs a three-stage deep-learning pipeline—integrating YOLOv5-based localization, ensemble-based re-classification, and binary post-processing. Furthermore, the system’s data-driven architecture allows it to be leveraged as an intelligent quality management (IQM) platform; by aggregating bilateral defect data and providing intuitive quality indicators via a Human-Machine Interface (HMI), it facilitates proactive quality control and seamless integration with external analytics systems. The successful deployment of the S-VADIS in an actual hot-rolling production line validates the effectiveness of the traceability-driven design approach, demonstrating its practical feasibility and scalability for advancing smart manufacturing in the steel industry.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_01"
    },
    {
      "id": "WePo3P.2",
      "paperId": "327",
      "title": "End-To-End Robotic Automation for Repeatable, Traceable, and Scalable VLE Data Generation",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527511",
          "name": "Lee, Minjae",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "405068",
          "name": "Oh, Tae Hoon",
          "affiliation": "UNIST"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Robotic Applications",
        "Information and Networking"
      ],
      "abstract": "Vapor–liquid equilibrium (VLE) data are essential for thermodynamic model fitting and separation-process design, yet reliable data generation remains labor-intensive for emerging solvent systems, hazardous mixtures, and new operating windows. Specialized VLE apparatuses and recent laboratory-automation frameworks address complementary parts of this challenge, but end-to-end coordination across preparation, reactor operation, sample transfer, and analysis remains limited in distributed laboratory settings. This paper presents a robotic workflow that connects sample preparation, reactor-side operation, transfer, and UV–Vis analysis in one experimental sequence. The platform integrates a custom liquid-handling station, a customized reactor module for automated sequencing and logging, robot-assisted vial and cuvette handling, and centralized supervisory control. Subsystem results showed gravimetrically inferred mean delivered volumes within 0.3% of target at 1, 3, and 5 mL, successful ten-cycle repetition of robot-assisted transfer and UV–Vis interaction tasks, automated acetone–water calibration with an R-squared value greater than 0.9999, and ethanol–water reactor checks that followed the Aspen-predicted VLE trend at a 50 mol% feed. These results show how one robotic platform can connect prepared composition, reactor-side history, and analytical evidence into a repeatable workflow toward traceable and scalable VLE data generation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_02"
    },
    {
      "id": "WePo3P.3",
      "paperId": "456",
      "title": "A Lifted Direct Transcription Framework for Active Suspension Control Co-Design",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528372",
          "name": "Min, Gyeong-ho",
          "affiliation": "Pusan National University"
        },
        {
          "id": "248478",
          "name": "Ahn, Changsun",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Control Theory and Applications"
      ],
      "abstract": "Active suspension systems require concurrent optimization of plant and controller subsystems (Control Co-Design, CCD) due to their strong bidirectional coupling. While direct transcription (DT) is widely used to solve CCD problems, conventional formulations implicitly nest nonlinear independent to dependent design variable mappings. To resolve these bottlenecks, this study proposes a novel Lifted CCD formulation. This method enables the solver to utilize topological shortcuts through temporarily infeasible spaces. Quantitative validation on an active suspension system demonstrates a 33.3% reduction in cost function value, while simultaneously improving vehicle ride comfort and energy efficiency. Ultimately, this framework offers a highly efficient, scalable paradigm universally applicable to various complex multi-physics co-design problems.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_03"
    },
    {
      "id": "WePo3P.4",
      "paperId": "643",
      "title": "Development of a Verification System for a Standardized Robot Framework at Incheon Airport to Improve Operational Efficiency",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463313",
          "name": "Oh, Seongjong",
          "affiliation": "Incheon International Airport Corporation"
        },
        {
          "id": "355672",
          "name": "Jung, Jooik",
          "affiliation": "Incheon International Airport Corporation"
        }
      ],
      "keywords": [
        "Control Devices and Instruments",
        "Robotic Applications"
      ],
      "abstract": "To improve airport operational efficiency, Incheon Airport is introducing heterogeneous autonomous mobile robots. However, each manufacturer uses different data formats and verification methods, complicating their operation and management. This study develops a verification system for a standardized robot framework that is vendor-agnostic, based on three core principles: standardization, reliability, and scalability. The framework unifies robot data formats and verification methods, and includes multi-robot cooperative control. It organizes the software into three layers-interface, abstraction, and service-to convert raw data from different robots into one standard model. Data is collected, stored, and displayed through a dedicated network that is separate from the airport's internal network. The verification system confirms reliability through virtual-physical verification, combining simulation and real-world testing.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_04"
    },
    {
      "id": "WePo3P.5",
      "paperId": "21",
      "title": "A Construction of Connected Dominating Set with Predetermined Nodes",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "469272",
          "name": "Park, Nam-Jin",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "409250",
          "name": "Won, Seung-Beom",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "409256",
          "name": "Kim, Yeong-Ung",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Information and Networking"
      ],
      "abstract": "This paper addresses the challenges in wireless ad-hoc networks, particularly focusing on the construction of a Connected Dominating Set (CDS) as a virtual backbone network. Unlike previous works that assume uniform qualifications for all nodes, we consider cases with predetermined nodes that must be either included in or excluded from the CDS due to their unique functionalities. In this context, we extend the Enforced-CDS problem to a CDS construction problem with predetermined nodes. Contribution includes the development of both centralized and distributed algorithms that utilize one-hop information, diverging from the traditional two-hop approach. The size of the computed CDS by the proposed algorithms does not exceed 6.798 times the optimum. Furthermore, simulation results show that the difference between centralized and distributed algorithms is minimal. This work provides a theoretical analysis and showcases the efficacy of algorithms in handling the dynamic requirements of wireless ad-hoc networks.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_05"
    },
    {
      "id": "WePo3P.6",
      "paperId": "58",
      "title": "Multiple Region-Dependent Control Design of T–S Fuzzy Systems with Actuator Saturation and Faults",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "524868",
          "name": "Jung, Duhee",
          "affiliation": "University of Ulsan"
        },
        {
          "id": "154036",
          "name": "Kim, Sung Hyun",
          "affiliation": "UOU"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper investigates the reliable control problem for Takagi–Sugeno (T–S) fuzzy systems in the presence of input saturation, actuator faults, and external disturbances. The proposed model accommodates matched actuator faults together with mismatched external disturbances, thereby reflecting practical operating conditions. To cope with these challenges, a sequence of nested invariant ellipsoidal sets and the corresponding set-dependent control gains is constructed, which drives state trajectories from a sufficiently large outer set into a minimal target set. The associated design conditions are then formulated as relaxed LMIs, so that both the invariant sets and the control gains can be obtained simultaneously through convex optimization.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_06"
    },
    {
      "id": "WePo3P.7",
      "paperId": "79",
      "title": "A Spectral Filtering Approach to Regret Analysis of Distributed Online Control for Linear Dynamical Systems",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525385",
          "name": "Chang, Ting-Jui",
          "affiliation": "National Cheng Kung University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Information and Networking",
        "Sensors and Signal Processing"
      ],
      "abstract": "This work studies the distributed online control problem over a network of linear time-invariant (LTI) systems in the presence of adversarial disturbances and time-varying convex costs. The network cost is characterized by the summation of local cost functions, where each local function is sequentially revealed only to the corresponding agent. The goal of each agent is to generate a control sequence, using only local observations and neighbor communication, that competes with the best {it centralized} linear policy in hindsight. We extend the recently proposed Online Spectral Control framework from the centralized setting to the distributed setting. In particular, each agent applies a spectral controller obtained by convolving past disturbances with the leading eigenvectors of a Hankel matrix, while the controller parameters are updated through a distributed online gradient descent step over the local surrogate costs. We formulate this problem as a {it regret} minimization problem based on the spectral parameterization, and under standard assumptions, we establish a sublinear regret bound of O(frac{sqrt{T}text{poly}(log T)}{gamma^3}), where T is the time horizon and gamma denotes the stability margin. The resulting bound also captures the dependence on the network size and connectivity.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_07"
    },
    {
      "id": "WePo3P.8",
      "paperId": "101",
      "title": "A Binary-System-Generic DAE–MPEC Framework for Startup Optimization of Packed Batch Distillation Columns",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525514",
          "name": "Lee, Nagyeong",
          "affiliation": "Incheon National University"
        },
        {
          "id": "409324",
          "name": "Kim, Jong Woo",
          "affiliation": "Incheon National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "The startup of a packed-column batch distillation is a transient multi-phase process in which liquid phases progressively form on initially dry packing. The resulting dynamic-optimization problem combines complementarity-constrained phase transitions with a large-scale NLP that is sensitive to the initial guess and scaling, so existing studies tune these settings system-by-system. We propose a binary-system-generic DAE–MPEC framework that removes this per-system tuning. A beta-based VLE relaxation places the liquid-only, two-phase, and vapor-only regimes in one continuous variable space, and the resulting DAE coupling NRTL thermodynamics with Billet–Schultes hydraulics is discretized by Radau IIA direct collocation. An auto-initialization derives variable bounds, initial guesses, and NLP scaling from thermodynamic data, and a primal–dual warm-start continuation on delta delivers the converged solution. The framework is demonstrated on four binary systems—acetone/ethanol, acetone/water, benzene/toluene, methanol/ethanol—with optimal startup times in 34.6–50.7 s and mass/energy balance errors below 0.10 %.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_08"
    },
    {
      "id": "WePo3P.9",
      "paperId": "104",
      "title": "Extended Robust Approximate Feedback Linearization for an Electromagnetic Levitation System",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525538",
          "name": "Bae, Su-Han",
          "affiliation": "Dong-A University"
        },
        {
          "id": "273952",
          "name": "Choi, Ho-Lim",
          "affiliation": "Dong-A University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents an extended robust approximate feedback linearization scheme for an electromagnetic levitation system. Unlike conventional approaches, the proposed method explicitly adopts a non-Brunovsky canonical form, which leads to more flexible controller design over the conventional Brunovsky canocnial form based methods. For stability analysis, an ϵ-scaled matrix framework is employed, which leads to a modified Lyapunov equation and an associated Lyapunov function. Based on this analysis, two sufficient ranges of the gain-scaling parameter ϵ are derived to guarantee asymptotic stability of the closed-loop system. Finally, the effectiveness of the proposed approach is demonstrated through a comparative study of the stability range and control performance against an existing method within the same analytical framework.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_09"
    },
    {
      "id": "WePo3P.10",
      "paperId": "133",
      "title": "Global Well-Posedness and Stability Analysis of 3D Generalized Navier-Stokes-Voigt Equations",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525682",
          "name": "Zhang, Yihan",
          "affiliation": "University of Jinan"
        },
        {
          "id": "525741",
          "name": "Wang, Jikang",
          "affiliation": "University of Jinan"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "In this paper, we study the three-dimensional generalized Navier-Stokes-Voigt equations, which are closely related to the modeling, stability analysis, and control of incompressible fluid systems. The global existence and uniqueness of solutions are proved for alpha > 5/6. If the initial data belongs to the Sobolev space H^{-s} and H^{alpha+1}, with 5/6 < alpha < 1, 0 < s < 1/2, and 3/2 < 2 alpha + s < 5/2, we establish the corresponding negative Sobolev space estimate in Theorem 2. The obtained estimates provide theoretical support for the stability and control analysis of Voigt-regularized fluid models. Moreover, numerical simulations based on a pseudo-spectral method are performed on the periodic domain to verify the theoretical results. The numerical results demonstrate the decay behavior of several energy-related quantities and agree well with the analytical estimates.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_10"
    },
    {
      "id": "WePo3P.11",
      "paperId": "139",
      "title": "Quadcopter Attitude Tracking Control Using an Adaptive Time Delay Sliding Mode Control",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525792",
          "name": "Thai, Ba Hoa",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "456991",
          "name": "Bang, Hyuntae",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "523894",
          "name": "Yun, YoungJun",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525797",
          "name": "Choi, Kyungwon",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525798",
          "name": "Hong, Seungjae",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525406",
          "name": "Jiwoong, Ha",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "293856",
          "name": "Youn, Wonkeun",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This study presents an adaptive time-delay sliding-mode controller (ATDSMC) for inner-loop attitude tracking of a quadcopter subject to unmodeled dynamics and external disturbances. Time-delay estimation (TDE) reconstructs the lumped unknown dynamics and equivalent external torque isturbance using one-step-delayed signals, thereby reducing reliance on the exact configuration-dependent inertia and oriolis matrices. Based on the TDE, the attitude-control input is constructed using a sliding surface and a componentwise adaptive switching-gain law. Practical boundedness of the sliding variable and tracking error is established under a bounded TDE-error assumption. Simulations of the threedegree- of-freedom rotational subsystem compare the proposed ATDSMC with linear time-delay control (LTDC) and conventional time-delay sliding-mode control (CTDSMC). Based on the mean of the roll, pitch, and yaw root-meansquare error (RMSE) values, ATDSMC reduces the tracking error relative to CTDSMC by 33.80% and 38.21% in the nominal and wind-disturbance cases, respectively.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_11"
    },
    {
      "id": "WePo3P.12",
      "paperId": "165",
      "title": "Design of a High-Gain Output Feedback Controller for the Hovering of a MIMO Quadrotor System",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525900",
          "name": "Lim, Yeong-Jun",
          "affiliation": "Dong-A University"
        },
        {
          "id": "273952",
          "name": "Choi, Ho-Lim",
          "affiliation": "Dong-A University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper proposes an output feedback control scheme accompanied by a Lyapunov-based stability analysis by explicitly introducing a gain-scaling factor ϵ into both the control and observer gains. The proposed method enables a direct assessment of system stability through the scaling parameter ϵ. Based on the resulting Lyapunov analysis, the admissible range of the design parameter ϵ is derived to guarantee the asymptotic stability of the closed-loop system. Finally, the effectiveness of the proposed approach is validated through quadcopter simulations, demonstrating improved hovering performance and robustness against external disturbances.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_12"
    },
    {
      "id": "WePo3P.13",
      "paperId": "174",
      "title": "Adaptive Kalman Filter-Based Fault Detection of the Pitch System in a Wind Turbine",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "524640",
          "name": "Nakkala, Suresh",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "525960",
          "name": "Hur, Sung-ho",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "This paper proposes a model-based fault detection approach for wind turbine pitch systems using an adaptive Kalman filter (AKF). The Kalman filter (KF) relies on fixed process and measurement noise covariances, which are not suitable for different operating conditions and fault magnitudes, and may degrade estimation accuracy. To overcome this limitation, the AKF is employed, which updates the noise covariance matrices in real time according to changes in system behavior due to different fault conditions, thereby improving the robustness of state estimation and enhancing fault detection performance. Residual signals are generated using the AKF, and fault detection is performed by comparing the residuals to thresholds, which are calculated using the H∞ norm and linear matrix inequalities. Simulation studies conducted under stochastic wind conditions demonstrate the effectiveness of the proposed method in detecting realistic pitch system faults.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_13"
    },
    {
      "id": "WePo3P.14",
      "paperId": "185",
      "title": "Toward Accurate Low-Impedance Rendering: Disturbance-Observer-Based Impedance Rendering Framework",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "216543",
          "name": "Yun, WonBum",
          "affiliation": "Korea Institute of Robotics and Technology Convergence"
        },
        {
          "id": "350976",
          "name": "Hong, Jeongwoo",
          "affiliation": "Korea Institute of Robotics & Technology Convergence (KIRO)"
        },
        {
          "id": "347993",
          "name": "Choi, Kiyoung",
          "affiliation": "Deagu Gyeongbuk Institute of Science and Technology"
        },
        {
          "id": "129982",
          "name": "Oh, Sehoon",
          "affiliation": "DGIST"
        },
        {
          "id": "229149",
          "name": "Kim, Junyoung",
          "affiliation": "KIRO(Korea Institute of Robotics & Technology Convergence)"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Human-Robot Interaction",
        "Robot Mechanism and Control"
      ],
      "abstract": "Low-impedance rendering is essential for achieving safe and compliant physical human–robot interaction. However, practical robotic systems inherently contain actuator nonlinearities, residual damping, model uncertainty, and unmodeled dynamics, which distort the realized impedance characteristics and generate steady-state errors under low-impedance conditions. This paper analyzes the influence of such residual dynamics on impedance rendering from an actuator-space perspective and shows that low-impedance rendering inherently amplifies disturbance sensitivity and equilibrium offsets. Also, a disturbance-observer-based robust impedance control framework is proposed. The proposed controller compensates for residual disturbances while preserving the interaction torque required for impedance rendering through a force-feedback structure. Analytical derivations show that the proposed framework effectively nominalizes the actuator dynamics and recovers the desired impedance characteristics. Experimental results demonstrate that the proposed method improves impedance rendering accuracy and eliminates steady-state errors caused by actuator nonlinearities and residual disturbances.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_14"
    },
    {
      "id": "WePo3P.15",
      "paperId": "189",
      "title": "Real-Time Nonlinear Model Predictive Control of Heavy-Duty Skid-Steered Mobile Platform for Trajectory Tracking Tasks",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "434965",
          "name": "Paz Anaya, Alvaro",
          "affiliation": "Tampere University"
        },
        {
          "id": "273857",
          "name": "Mustalahti, Pauli",
          "affiliation": "Tampere University"
        },
        {
          "id": "463518",
          "name": "Dastranj, Mohammad",
          "affiliation": "Tampere University"
        },
        {
          "id": "333311",
          "name": "Mattila, Jouni",
          "affiliation": "Tampere University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Autonomous Vehicle Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "This paper presents a framework for real-time optimal control of a heavy-duty skid-steered mobile platform for trajectory tracking. Accurate real-time performance is important in situations where the system is affected by uncertainties and disturbances, and the controller must compensate for these effects to provide stable performance. A multiple-shooting nonlinear model-predictive control framework is proposed, using sensor readings and a suitable optimization routine for genuine real-time performance with high accuracy. The controller is tested on different tracking trajectories where it demonstrates desirable performance in terms of both speed and accuracy. The obtained results demonstrate millisecond-scale execution and centimeter-level trajectory-tracking accuracy on the considered heavy-duty platform.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_15"
    },
    {
      "id": "WePo3P.16",
      "paperId": "229",
      "title": "T–S Fuzzy Control for the Lateral Dynamics of Flapping-Wing Micro Aerial Vehicles",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "410845",
          "name": "Nguyen, Khanh Hieu",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "148879",
          "name": "Kim, Seungkeun",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper investigates a Takagi-Sugeno (T-S) fuzzy controller for the lateral dynamics of Flapping-Wing Micro Aerial Vehicles (FWMAVs) while considering actuator saturation and external disturbances. A T-S fuzzy model is derived by directly incorporating the force and moment dynamics of the left and right wing pairs, where altitude and lateral motion are regulated through total and differential thrust. In addition, realistic scenarios dealing with saturation constraints and external disturbances are rigorously addressed. Accordingly, the T-S fuzzy control gains are designed based on sufficient stabilization conditions formulated in terms of Linear Matrix Inequalities (LMIs). Finally, experimental validation on a Flapper Nimble+ demonstrates the effectiveness of the proposed approach.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_16"
    },
    {
      "id": "WePo3P.17",
      "paperId": "251",
      "title": "Robust Safe Decoding for Large Language Models Via Adaptive Control Barrier Functions",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463946",
          "name": "Imliki, Wajih",
          "affiliation": "KAIST"
        },
        {
          "id": "409919",
          "name": "Deresa, Chala Adane",
          "affiliation": "KAIST"
        },
        {
          "id": "125177",
          "name": "Choi, Han-Lim",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Artificial Intelligence Systems",
        "Process Control Systems"
      ],
      "abstract": "Large Language Models (LLMs) are increasingly deployed in real-world applications, yet they remain prone to generating unsafe or undesirable content. Recent work on Control Barrier Functions (CBFs) introduces a control-theoretic framework for safe decoding by enforcing token-level safety constraints during generation. However, existing approaches assume access to a perfect safety classifier, an assumption that fails in practice due to noise, model mismatch, and distributional shift. In this paper, we propose Adaptive Control Barrier Function (AdaptiveCBF) filtering, a robust extension of CBF-based decoding that explicitly accounts for classifier uncertainty. Our method introduces (i) an adaptive strictness parameter that is tighter near the safety boundary than in deep-safe regions, and (ii) a safety margin that compensates for stochastic classifier noise. We further propose a boundary-only variant (AdaptiveCBF-BO) and a smooth relaxation (SmoothCBF) to improve efficiency and generation quality. We provide a probabilistic safety guarantee showing that, under Gaussian classifier noise, the probability of maintaining safety over a sequence scales with the safety margin-to-noise ratio as Φ(ε/σ)^N. Empirical evaluations across multiple tasks (toxicity, sentiment, topic control), benchmarks (RealToxicityPrompts, BeaverTails), and models demonstrate that AdaptiveCBF consistently maintains or improves safety over standard CBF methods under classifier noise. Our approach is training-free, modular, and readily applicable to existing LLMs.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_17"
    },
    {
      "id": "WePo3P.18",
      "paperId": "258",
      "title": "Integrated Fault Detection and Active Fault-Tolerant Control for Independently Driven Electric Vehicles under Motor, Tire, and Steering Faults",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526194",
          "name": "Kim, Daehan",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "463487",
          "name": "Lim, Donghwan",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "463488",
          "name": "Park, Hanbyeol",
          "affiliation": "Kwangwoon Univ"
        },
        {
          "id": "238340",
          "name": "Back, Juhoon",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper proposes an integrated fault detection and isolation (FDI) and active fault-tolerant control (AFTC) framework for in-wheel-motor electric vehicles. In conventional torque-vectoring control, actuator, tire, or steering faults may be treated as external disturbances, which can lead to inappropriate torque allocation under degraded vehicle conditions. To address this problem, a nonlinear unknown input observer is first designed to perform chassis-level preliminary fault detection under unknown inputs. Then, per-wheel observers combining Luenberger-type observation, adaptive estimation, and sliding-mode correction are introduced to isolate wheel-related faults and distinguish them from steering faults according to a fault-decision rule. Based on the isolated fault condition, the torque-vectoring controller is reconfigured by modifying the prediction model, control weights, and torque allocation rule. Simulation results under motor efficiency degradation, tire puncture, and steer-by-wire fault scenarios show that the proposed framework improves fault isolation capability and maintains post-fault vehicle stability compared with conventional disturbance-compensation-based torque-vectoring control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_18"
    },
    {
      "id": "WePo3P.19",
      "paperId": "260",
      "title": "Terrain-Label-Conditioned GP-MPC Supervision for RL-Based Quadruped Locomotion on Uneven Terrain",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "402432",
          "name": "Lee, Seungyeon",
          "affiliation": "Yonsei University"
        },
        {
          "id": "131319",
          "name": "Yang, Hyunseok",
          "affiliation": "Yonsei University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Mechanism and Control",
        "Process Control Systems"
      ],
      "abstract": "Robust quadruped locomotion on uneven terrain requires terrain-aware command adaptation under uncertain contact conditions. This paper proposes a terrain-label-conditioned GP-MPC supervisory framework for RL-based quadruped locomotion. A visual terrain recognition module assigns terrain labels, a Gaussian Process residual model predicts terrain-dependent model errors and uncertainty, and a GP-MPC supervisor refines the velocity command before it is passed to a pre-trained RL policy. Isaac Sim/Isaac Lab experiments on flat, gravel, hill, and stairs terrains show that the proposed framework improves GP prediction accuracy and command-level adaptation compared with RL-only and RL-MPC baselines.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_19"
    },
    {
      "id": "WePo3P.20",
      "paperId": "334",
      "title": "Discrete-Event Supervisory Control of a Robotic Material Synthesis-Transfer-Analysis Workflow",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "402645",
          "name": "Yang, Dayeon",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "211875",
          "name": "Ju, Chanyoung",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Process Control Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "Local device controllers in a robotic material laboratory are designed in isolation and cannot guarantee global interlocks. This paper formulates the coordination layer of a robotic material synthesis–transfer–analysis workflow as a discrete-event supervisory control problem. The plant composes four modular automata: the mobile manipulator, the synthesizer, the analyzer, and a dedicated sample-state automaton that records the location and processing stage of the sample, including the configuration entered after an uncontrollable grip failure. Five specification automata encode process order, equipment and robot command–state matching, and sample-state consistency; a nonblocking supervisor is synthesized from the supremal controllable sublanguage of the legal language and verified exhaustively over the 17-state closed loop. Its necessity is established by an ablation against the supremal supervisor of the equipment-only model: after the same trace, in which the gripper releases the sample at the synthesizer, only the proposed supervisor disables the load command that follows, the other admitting it and starting a reaction on an absent sample. Sixteen of the 155 disablements are induced by the sample-state specification alone, and removing the post-failure sample states leaves the synthesis problem unsolvable.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_20"
    },
    {
      "id": "WePo3P.21",
      "paperId": "347",
      "title": "Torque-Level Learning-Based Disturbance Observer for Robust Quadruped Locomotion",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "407325",
          "name": "Kim, Doyoun",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "463487",
          "name": "Lim, Donghwan",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "238340",
          "name": "Back, Juhoon",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper proposes a learning-based torque-level disturbance observer (DOB) for quadruped locomotion policy. The observer predicts the equivalent applied joint torque from proprioceptive history and estimates the disturbance by comparing it with the applied control torque. The estimated disturbance is compensated online through feedforward torque correction. Simulation results under joint friction, external push, and periodic torque disturbances show improved velocity tracking, attitude stability, and termination rate compared with the baseline policy without DOB compensation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_21"
    },
    {
      "id": "WePo3P.22",
      "paperId": "359",
      "title": "A Study on Synchronization of Coupled Kuramoto Oscillators in Infinite Time and Finite Time Settings",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527145",
          "name": "Ooki, Yuichiro",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "166714",
          "name": "Zhai, Guisheng",
          "affiliation": "Shibaura Institute of Techbology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Information and Networking"
      ],
      "abstract": "This paper is focused on the synchronization problem of coupled Kuramoto oscillators. We treat the coupling term as a control input and analyze the synchronization phenomenon in both infinite and finite time settings from the perspective of control theory. While existing studies have mainly investigated infinite time synchronization and finite time synchronization separately, this paper analyzes and compares both synchronization mechanisms within a common Kuramoto oscillator framework. In the infinite time case, we deal with the general Kuramoto model and analyze whether the phase difference converge to zero asymptotically, by examining the Jacobian matrix at the equilibrium (synchronization) point. A numerical simulation is provided to verify the proposed approach. In the finite time setting, we derive an upper bound of the settling time and show that synchronization can be achieved within a finite time characterized by the settling time. A numerical simulation is performed to confirm the finite time synchronization behavior of the coupled oscillators.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_22"
    },
    {
      "id": "WePo3P.23",
      "paperId": "378",
      "title": "Existence Results for Fractional Differential Inclusions with Nonlocal Antiperiodic Boundary Conditions",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527981",
          "name": "Hu, Xiaoyang",
          "affiliation": "University of Jinan"
        },
        {
          "id": "407479",
          "name": "Jin, Nana",
          "affiliation": "University of Jinan"
        },
        {
          "id": "415695",
          "name": "Chen, Wei",
          "affiliation": "University of Jinan"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper investigates the existence of solutions for fractional differential inclusions with nonlocal antiperiodic boundary conditions. The existence results for the convex case are established by employing the Leray-Schauder nonlinear alternative theorem. Furthermore, sufficient conditions for the existence of solutions in the nonconvex case are derived via the contraction mapping principle. The results obtained in this paper generalize the relevant conclusions for fractional differential equations. Finally, two examples are provided to illustrate the validity of the main results.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_23"
    },
    {
      "id": "WePo3P.24",
      "paperId": "392",
      "title": "An Enhanced Admittance-Based Force Tracking Control for Robot Manipulators Via Adaptive Sliding Mode and Time-Delay Control",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "402578",
          "name": "Oh, Sejik",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "528035",
          "name": "Choi, Bongjun",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "402584",
          "name": "Kwon, Nam Kyu",
          "affiliation": "Yeungnam University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Human-Robot Interaction",
        "Robot Mechanism and Control"
      ],
      "abstract": "This paper presents a unified control framework that integrates adaptive sliding mode control (ASMC), time delay control (TDC), and admittance filtering to achieve robust force and position tracking in robot manipulators. TDC is employed to estimate unmodeled dynamics using delayed measurements, while ASMC enhances robustness by adaptively compensating for time-delay estimation (TDE) errors and mitigating chattering. The admittance mechanism transforms force tracking errors into position corrections, enabling force tracking without altering the underlying position control structure. A novel adaptive law is introduced to regulate control gains more stably by incorporating a decline-rate adjust mentfactor, improving tracking under uncertainty. Stability of the proposed system is guaranteed through Lyapunov-based analysis, and simulation results demonstrate a significant improvement in position tracking accuracy—reducing RMSE from 0.0522 mm to 0.019 mm—while maintaining reliable force tracking performance.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_24"
    },
    {
      "id": "WePo3P.25",
      "paperId": "395",
      "title": "On Controlling the Effect of Error Growth in Unlimited Encrypted Iterative Learning Control",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525712",
          "name": "Lee, Sangwon",
          "affiliation": "Seoul National University of Science and Technology"
        },
        {
          "id": "198306",
          "name": "Kim, Junsoo",
          "affiliation": "Seoul National University of Science and Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Information and Networking"
      ],
      "abstract": "This paper proposes a Ring Learning With Errors (Ring-LWE) based encrypted iterative learning control (ILC) framework for repetitive tracking tasks over networked control systems. The architecture integrates an encrypted dynamic feedback controller with an encrypted ILC computation. During each trial, the feedback controller is evaluated in the ciphertext domain, and the encrypted output trajectory is stored directly in the cloud. After each trial, the cloud evaluates the tracking error and performs the ILC computation from the stored ciphertexts, so that the plant side does not need to store the accumulated trial data. The proposed framework uses distinct packing parameters for ciphertext multiplication, allowing the cloud to handle both lower-dimensional output feedback control and higher-dimensional ILC computation without decryption. While error growth in Ring-LWE based encrypted control is generally suppressed by closed-loop stability, the marginally stable ILC iterations cause the injected errors to accumulate continuously. To address this challenge, a range-space decomposition is introduced in the encrypted ILC formulation to allow evaluation under unlimited updates. Numerical simulations show that the range-space decomposition suppresses encryption-induced perturbation, while ciphertext packing improves the computational efficiency of the encrypted ILC update.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_25"
    },
    {
      "id": "WePo3P.26",
      "paperId": "425",
      "title": "Control-Oriented Modeling of a Hybrid Magnetic Bearing for a Solar Array Drive Assembly",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528240",
          "name": "Hanwoong, Ahn",
          "affiliation": "Korea Aerospace Research Institute"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Control Devices and Instruments",
        "Industrial Applications of Control"
      ],
      "abstract": "This paper presents a control-oriented modeling approach for a hybrid magnetic bearing intended for a solar array drive assembly. Conventional bearing-supported drive mechanisms are vulnerable to friction, wear, and contamination, which can significantly degrade performance in harsh operating environments. To address these limitations, a non-contact support concept based on a hybrid magnetic bearing is investigated. The proposed system combines permanent magnets and electromagnets to provide bias flux and actively controllable suspension force. For control design, a lumped-parameter force model is developed by relating the magnetic bearing force to the control current and air-gap displacement around the nominal operating point. Based on this model, the dynamic behavior of the suspended rotor is analyzed, showing that active feedback control is required to maintain stable operation. A displacement-feedback control method is introduced to regulate the rotor position and maintain the desired air gap under external disturbances. Simulation results indicate that the proposed approach can achieve stable suspension and improved disturbance rejection, demonstrating its feasibility for future non-contact solar array drive assembly systems.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_26"
    },
    {
      "id": "WePo3P.27",
      "paperId": "433",
      "title": "Approximating Control Invariant Sets with Migrating Samples for Control Barrier Function Synthesis",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "248204",
          "name": "Song, Yeongho",
          "affiliation": "KAIST"
        },
        {
          "id": "402728",
          "name": "Jang, Hongro",
          "affiliation": "KAIST"
        },
        {
          "id": "148890",
          "name": "Oh, Hyondong",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Control barrier functions provide a lightweight way to enforce safety in real time, but the associated quadratic program can become infeasible under input saturation unless the set defined by the barrier is control invariant. The maximal control invariant set can be obtained through Hamilton--Jacobi reachability, yet the standard grid-based solver scales exponentially with the state dimension. This paper presents a sample-based method that approximates this set with far fewer points by treating the samples as a design object rather than a passive grid. Initial samples are placed along the safe-set boundary from the safety specification, and a portion migrates inward as the value iteration proceeds, so the limited budget is spent where the value function departs from the specification. A Gaussian process with a signed-distance prior mean represents the value function and supplies a posterior variance, from which an uncertainty-aware barrier is synthesized as a lower confidence bound of the posterior. On a Dubins car avoiding a circular obstacle, the method recovers the control invariant set more accurately than fixed-sample baselines at the same budget and yields safe goal-reaching behavior.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_27"
    },
    {
      "id": "WePo3P.28",
      "paperId": "442",
      "title": "State Observer Based Robust Stewart Platform Control for UAV Landing Shock Mitigation Via Super Twisting Sliding Mode Control Approach",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463139",
          "name": "Kang, Hyeong Yeop",
          "affiliation": "Pukyong National Universit"
        },
        {
          "id": "527784",
          "name": "Park, SeoJin",
          "affiliation": "Pukyong National Univiersity"
        },
        {
          "id": "317444",
          "name": "Choi, Woo Young",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "This paper proposes a state estimator-based robust control framework for a Motion platform to enable safe Unmanned Aerial Vehicle(UAV) takeoff and landing. Instead of IMUs or direct task-space sensing, time-of-flight(ToF) sensors measure actuator leg lengths. Based on these measurements, a super-twisting algorithm(STA)-based observer reconstructs the platform’s pose and velocity. These estimates define tracking errors, and a super-twisting sliding mode controller (STSMC) generates actuator inputs for robust tracking under disturbances and uncertainties. The method enables output-feedback control without direct task-space measurements, reducing sensor dependency. Experiments demonstrate reliable state estimation and tracking performance, contributing to safer UAV operations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_28"
    },
    {
      "id": "WePo3P.29",
      "paperId": "471",
      "title": "Event-Triggered Observer-Based Controllers for Multi-Agent Linear Systems",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525779",
          "name": "Yang, Byeongseok",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "385232",
          "name": "Ban, Jaepil",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Industrial Applications of Control"
      ],
      "abstract": "This paper proposes an observer-based event-triggered control scheme for leader-follower multi-agent linear systems. The proposed approach aims to reduce unnecessary communication among agents while guaranteeing stable leader-following synchronization. In the proposed framework, each follower agent updates its control input only when a predefined event-triggering condition is satisfied, thereby reducing both communication and control update frequencies. An observer-based controller is employed, and the stability of the closed-loop system is analyzed based on Lyapunov stability theory. Numerical simulation results demonstrate that all follower agents successfully track the leader state under reduced communication events. The results confirm that the proposed event-triggered control strategy achieves stable leader-following synchronization while improving communication efficiency and reducing unnecessary control updates in multi-agent systems.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_29"
    },
    {
      "id": "WePo3P.30",
      "paperId": "486",
      "title": "Application of Reinforcement Learning to a Swing Actuated by Pneumatic Artificial Muscles",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "118329",
          "name": "Kang, Bongsoo",
          "affiliation": "Hannam University"
        },
        {
          "id": "185961",
          "name": "Park, Dongil",
          "affiliation": "Korea Institute of Machinery and Materials (KIMM)"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Artificial Intelligence Systems",
        "Control Devices and Instruments"
      ],
      "abstract": "Reinforcement learning is a method for achieving control objectives through iterative learning processes, much like humans do. A swing is an interesting physical system that can generate continuous oscillatory motion through the shifting of the rider's center of gravity. Humans also require considerable trial and error to sustain swinging. In this study, a swing device using the contraction of pneumatic artificial muscles was developed, and a reinforcement learning technique was implemented to demonstrate its capability to learn how to amplify swing motions. Experimental results showed that swing motion was possible with a stationary rider by adjusting the length of the artificial muscles instead of using fixed-length ropes.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_30"
    },
    {
      "id": "WePo3P.31",
      "paperId": "491",
      "title": "Reference Modulation for Time-Delayed Robot Manipulator",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528250",
          "name": "Kang, Juhyeok",
          "affiliation": "Hanyang University"
        },
        {
          "id": "349323",
          "name": "Lee, Youngwoo",
          "affiliation": "Hanyang University ERICA"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Robot manipulators are widely used in industrial applications that require high tracking accuracy and robustness. However, in practical robotic systems, time delays arising from sensing, computation, and communication processes may degrade tracking performance and even destabilize the robotic system. Since such delays can be regarded as disturbance-like uncertainties that degrade control performance, robustness against time delays is an important issue in robot manipulator control. This paper presents a reference modulation technique for robot manipulators to mitigate the adverse effects of time delays. To improve tracking performance and robustness, the proposed method modulates the reference signal to shape the loop-gain characteristics over a desired frequency range. In addition, the proposed method can be incorporated into conventional control frameworks without significant structural modification. The effectiveness of the technique is validated through simulations on a 2-DOF robot manipulator, where improved tracking performance and delay robustness are demonstrated in comparison with the conventional control approach.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_31"
    },
    {
      "id": "WePo3P.32",
      "paperId": "493",
      "title": "The Effectiveness of Sliding Mode Control for Robust Vision Stabilization under the Plant-Binding Condition",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "444999",
          "name": "Yang, SooYeun",
          "affiliation": "Stony Brook University"
        },
        {
          "id": "420415",
          "name": "Choi, Jongseong",
          "affiliation": "State University of New York, Stony Brook"
        },
        {
          "id": "162058",
          "name": "Choi, Seung-Bok",
          "affiliation": "The State University of New York, Korea (SUNY Korea)"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Vision",
        "Robot Mechanism and Control"
      ],
      "abstract": "Boundary-layer Sliding Mode Control (SMC) has been applied to vision-based stabilization, but identifying its activation condition against simpler causal baselines (LPF, PID) has been elusive. The operational condition is plant binding: the disturbance velocity approaches or exceeds the actuator slew limit, forcing a bounded per-step actuation budget against a near-binding disturbance. We validate this in two independent vision domains: handheld translation stabilization (12 1080p clips; LPF, PID, SMC, L1 ) and angular re-framing against a virtual slew-rate-limited pan–tilt–zoom (PTZ) plant. Outside binding, leave-one-out cross-validation makes SMC and LPF on translation statistically indistinguishable, and PID beats SMC on the angular 99th -percentile pointing offset by 5.85◦ (95% CI clear of zero); inside binding, the translation gap stays a tie and SMC beats PID on the angular worst case (Cohen’s d up to +0.83). The PTZ plant’s 100◦ /s default sits on the cross-over, which explains a small-margin PID result previously reported in the angular setting. A complementary ablation shows raising the SMC reaching gain k costs mean tracking outside a narrow window.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_32"
    },
    {
      "id": "WePo3P.33",
      "paperId": "508",
      "title": "Position and Force Tracking of a 7-DOF Redundant Manipulator Using Null-Space Compliance Control",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528528",
          "name": "Lee, Yonghwan",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "385232",
          "name": "Ban, Jaepil",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Human-Robot Interaction",
        "Robot Mechanism and Control"
      ],
      "abstract": "In position-force control tasks, unexpected external forces applied to the robot body can degrade both end-effector position tracking accuracy and contact force regulation performance. To address this problem, we propose a null-space compliance control method for maintaining both position and force tracking performance of a redundant robotic manipulator under external interactions. The proposed method preserves the primary position and force tracking tasks of the end-effector while damping interaction-induced motion through redundant null-space behavior. In addition, a virtual contact environment is introduced to model contact interactions, enabling circular trajectory tracking under a constant contact force condition. To evaluate the effectiveness of the proposed approach, comparative simulations are conducted with and without the proposed null-space compliance control. The results demonstrate that the proposed method outperforms the baseline controller in terms of position tracking and force tracking accuracy under external interactions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_33"
    },
    {
      "id": "WePo3P.34",
      "paperId": "509",
      "title": "Composite HOCBF-Based Safe Control of a Manipulator in a Complex Environment",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528550",
          "name": "Han, Jaeseong",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "131893",
          "name": "Suh, Jinho",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control",
        "Robot Mechanism and Control"
      ],
      "abstract": "This paper presents a clearance-adaptive composite High-Order Control Barrier Function (HOCBF) framework for real-time safe control of a 6-DOF manipulator in cluttered environments. Imposing one HOCBF inequality per robot–obstacle pair scales poorly with the number of pairs, while aggregating them with a fixed smoothness parameter can be overly conservative and stall the robot in a narrow passage. The proposed method aggregates all normalized pairwise barriers into a single log-sum-exp composite and adapts the smoothness parameter each cycle to the current minimum clearance, sharpening the approximation only near obstacles. With analytical Product-of-Exponentials gradients, the filter reduces to one linear inequality in the joint acceleration solved in closed form. On a UR3 with N=84 pairs, it reaches the goal at a hard 1 kHz with 0% deadline miss.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_34"
    },
    {
      "id": "WePo3P.35",
      "paperId": "532",
      "title": "Global Stabilization of Nonlinear System Via Adaptive Output Feedback with Function Control Coefficients and Unknown Disturbances",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461969",
          "name": "Sun, Yingming",
          "affiliation": "University of Jinan"
        },
        {
          "id": "463731",
          "name": "Song, Yucheng",
          "affiliation": "University of Jinan"
        },
        {
          "id": "407312",
          "name": "Li, Hui",
          "affiliation": "University of Jinan"
        },
        {
          "id": "525805",
          "name": "Ma, Naiheng",
          "affiliation": "University of Jinan"
        },
        {
          "id": "408666",
          "name": "Jin, Shaoli",
          "affiliation": "University of Jinan"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper investigates the problem of global stabilization via adaptive output feedback for a class of uncertain nonlinear systems with function control coefficients and unknown disturbances. To this end, a novel dynamic high gain is introduced to overcome additional system nonlinearities and severe uncertainties. Then, a high-gain observer with appropriate design parameters is constructed to reconstruct the unmeasured states. Subsequently, an adaptive output-feedback controller is designed to achieve global stabilization of the closed-loop system. Finally, a numerical example is provided to validate the feasibility and effectiveness of the proposed control scheme.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_35"
    },
    {
      "id": "WePo3P.36",
      "paperId": "534",
      "title": "An Exponential-Convergent Output-Feedback Stabilization Scheme for a Class of Nonlinear Systems with Function Control Coefficients and Dynamic Uncertainties",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525805",
          "name": "Ma, Naiheng",
          "affiliation": "University of Jinan"
        },
        {
          "id": "463731",
          "name": "Song, Yucheng",
          "affiliation": "University of Jinan"
        },
        {
          "id": "407312",
          "name": "Li, Hui",
          "affiliation": "University of Jinan"
        },
        {
          "id": "461969",
          "name": "Sun, Yingming",
          "affiliation": "University of Jinan"
        },
        {
          "id": "408666",
          "name": "Jin, Shaoli",
          "affiliation": "University of Jinan"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper focuses on designing an adaptive output-feedback control scheme for exponential stabilization of a class of nonlinear systems with function control coefficients and dynamic uncertainties. To tackle the above problem, we construct a complete and effective adaptive compensation mechanism that can compensate for system uncertainties and guarantee the desired convergence rate. Significantly, we develop an elaborate dynamic gain whose update rule integrates exponential time-varying terms. With this gain, the unknown growth rate can be well managed. In addition, real-time adjustment of convergence rate based on dynamic uncertainties ensures the system achieves exponential convergence. Accordingly, we construct an adaptive output-feedback controller based on the dynamic gain observer, which enables exponential convergence of both system states and observer states.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_36"
    },
    {
      "id": "WePo3P.37",
      "paperId": "540",
      "title": "Robust Observer-Based Control of Vehicle Active Suspension Systems Using KalmanNet",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528626",
          "name": "Kang, Jongmo",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "528630",
          "name": "Choi, Yuchang",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "528638",
          "name": "Kim, Youngjin",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "528631",
          "name": "Yun, Jeongmin",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "528637",
          "name": "Oh, Seokgyun",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "528625",
          "name": "Oh, Dongho",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Sensors and Signal Processing",
        "Industrial Applications of Control"
      ],
      "abstract": "The control performance of active suspension systems strongly depends on the accuracy of the state estimates used for feedback control. However, in practical vehicle applications, direct measurement of all suspension states is difficult because of sensor cost, installation constraints, and durability issues. In particular, the relative velocity of the damper is closely related to the suspension damping force and active control input, but it is not readily available from standard sensor configurations. This study proposes a KalmanNet-based observer-control framework for active suspension systems under limited sensor measurements. The proposed observer preserves the physics-based quarter-car model and augments the nominal model-based observer with a residual-driven GRU correction module. In this structure, learning is used to compensate for the estimation errors of the nominal observer rather than to replace the suspension model with a black-box neural network. The estimated states are supplied to an acceleration-weighted LQR controller for closed-loop active suspension control. Simulation results under limited sensor configuration, parameter uncertainty, and road disturbance show that the proposed method improves the relative velocity estimation of the damper compared with the nominal observer. The results also indicate that improved observer performance can contribute to better closed-loop body response and ride-comfort indices under limited sensing conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_37"
    },
    {
      "id": "WePo3P.38",
      "paperId": "651",
      "title": "Polar-Coordinate Internal Model-Based Impedance Control for Independent Radial and Tangential Motion Assistance in Upper-Limb Rehabilitation",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532134",
          "name": "Kim, Useok",
          "affiliation": "Ulsan National Institute of Science and Technology(UNIST)"
        },
        {
          "id": "330204",
          "name": "Son, Jeongwoo",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "330687",
          "name": "Hwang, Seongil",
          "affiliation": "Ulsan National Institute of Science and Technology(UNIST)"
        },
        {
          "id": "114735",
          "name": "Kang, Sang Hoon",
          "affiliation": "Ulsan National Institute of Science and Technology(UNIST) / U. of Maryland"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Mechanism and Control",
        "Rehabilitation Robot"
      ],
      "abstract": "This paper proposes a polar-coordinate Internal Model-Based Impedance Control (PC-IMBIC) for rehabilitation training in planar circular motion (CM), requiring coordinated shoulder and elbow movements, for patients with neurological disorders. In robot-assisted CM training, the robot endpoint being held by a patient is ideally moved tangentially along the desired path while maintaining a constant radius. Previous studies on CM control represented the desired path using discretized trajectory points and defined local motion directions from adjacent path segments. This approach requires path segmentation to determine the local motion direction at each trajectory point. The proposed PC-IMBIC, formulated in polar coordinates, was able to separately control radial and tangential motion while providing independent assistance forces in both directions, without trajectory segmentation or local direction estimation during CM. A preliminary contact experiment, comparing PC-IMBIC with conventional IMBIC, demonstrated the advantage of PC-IMBIC for providing an independent assistance force in radial and tangential directions in CM assistance.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_38"
    },
    {
      "id": "WePo3P.39",
      "paperId": "660",
      "title": "Co-Simulation and Test-Bench Validation of an I-DAS System",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532142",
          "name": "Kim, Seong Hyun",
          "affiliation": "Hanyang University"
        },
        {
          "id": "532138",
          "name": "Choi, Hyowon",
          "affiliation": "Hanyang University"
        },
        {
          "id": "171061",
          "name": "Kim, Taegyun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents an integrated co-simulation and test-bench validation method for an integrated disconnect actuator system (I-DAS) using a dog-clutch mechanism. The disconnector must complete a 2WD-AWD transition rapidly while limiting impact load and avoiding baulking, stiction, and ratcheting. An Ansys Motion multibody model was coupled with a Simulink torque controller. The model includes a 10.65 gear ratio, CAD-derived inertia, actuator torque, shaft-speed synchronization, and sleeve-displacement feedback. Phase-sweeping simulations identified a maximum baulking region of 2.22 degrees, corresponding to 29.6% of the 7.5 degree tooth pitch. A four-shaft equivalent-inertia test bench was instrumented with a force/torque sensor and a laser displacement sensor. At 20 rpm output speed and 10 A actuator current, the measured engagement time was approximately 200 ms, with a peak torque of 6.3 Nm and a peak thrust of 482.4 N. The results show that phase-aware torque control and boundary-condition matching are essential for reliable engagement and model validation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_39"
    },
    {
      "id": "WePo3P.40",
      "paperId": "665",
      "title": "Maximum Allowable Time Delay Analysis for Input Time Delay Systems Via Lyapunov-Krasovskii Functionals",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532101",
          "name": "Kim, Hyeonggeol",
          "affiliation": "Daegu Gyeongbuk Institute of Science & Technology"
        },
        {
          "id": "228442",
          "name": "Lee, Seong-Min",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents a Lyapunov--Krasovskii functional (LKF)-based framework for evaluating the maximum allowable time delay of linear systems with input delays. A delay-dependent stability criterion is derived by constructing an appropriate Lyapunov--Krasovskii functional and formulating the stability conditions as a set of Linear Matrix Inequalities (LMIs). The maximum allowable time delay is obtained through an iterative LMI feasibility search, providing a systematic approach to delay margin analysis. To validate the proposed framework, a two-degree-of-freedom (2-DOF) helicopter system is considered as a case study. The theoretical delay margin is compared with the experimentally observed stability limit under increasing input delays. The comparison demonstrates close agreement between theoretical predictions and experimental results, confirming the effectiveness of the proposed framework. The proposed approach provides a practical and computationally efficient tool for evaluating delay margins and verifying the stability of linear time-delay systems, and it can serve as a useful basis for the analysis and design of networked control systems and other applications affected by communication and processing delays.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_40"
    },
    {
      "id": "WePo3P.41",
      "paperId": "680",
      "title": "Control Logic Development of Multi-Drive Electric Vehicles with Planetary Gear System",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532225",
          "name": "Choe, Chankyu",
          "affiliation": "Dankook University"
        },
        {
          "id": "532235",
          "name": "Kim, Hyunjoong",
          "affiliation": "Dankook University"
        },
        {
          "id": "532231",
          "name": "Ryu, Seungyeon",
          "affiliation": "Dankook University"
        },
        {
          "id": "532230",
          "name": "Lee, Heeyun",
          "affiliation": "Dankook University"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "In this study, a powertrain based on a compound planetary gear set was designed to meet the growing demand for high-performance electric vehicles, and torque coupling of the planetary gear was implemented through a multi-motor configuration. The system consists of two motors connected via a planetary gear set, and the vehicle driving modes are defined according to motor engagement and gear ratio selection. A control logic was developed in MATLAB/Stateflow to operate each motor within its high-efficiency region, and an optimization was performed to minimize power consumption, with the total motor power consumption as the objective function and the driving mode and torque distribution ratio as input variables. A comparison with a single planetary gear model demonstrated the superiority of the Compound Planetary Gear Set architecture, which offers diverse driving modes and greater freedom in torque distribution, and an energy consumption comparison over urban and highway driving cycles validated the effectiveness of the proposed control logic.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_41"
    },
    {
      "id": "WePo3P.42",
      "paperId": "683",
      "title": "Analysis and Simulation of Multi-Mode Hybrid Systems Based on a Generalized Modeling Method",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532327",
          "name": "Kang, Jihoon",
          "affiliation": "Dankook University"
        },
        {
          "id": "532328",
          "name": "Han, Jiyun",
          "affiliation": "Dankook University"
        },
        {
          "id": "532230",
          "name": "Lee, Heeyun",
          "affiliation": "Dankook University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This study presents a model-based integrated analysis framework for consistently interpreting and controlling complex multi-mode hybrid electric powertrains. The main objective is not only to compare different vehicles, but also to establish a unified procedure that can be applied to various powertrain architectures. Four multi-mode hybrid electric vehicles are analyzed to investigate how structural differences affect optimal energy management characteristics. A lever-diagram-based backward-facing model is developed to generalize each powertrain structure and derive engine and motor operating points from the required wheel torque and speed according to the operating mode, clutch state, and gear ratio. For each feasible operating candidate, fuel consumption and battery power usage are calculated, and the Pareto Frontier Line is derived to extract efficient operating candidates. These candidates are then used as inputs for Dynamic Programming and Pontryagin’s Minimum Principle to obtain optimal energy management solutions. By comparing DP and PMP results, the consistency and reliability of the proposed analysis framework are examined. The results can provide benchmark data for future ECMS, rule-based, and reinforcement-learning-based energy management strategies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_42"
    },
    {
      "id": "WePo3P.43",
      "paperId": "215",
      "title": "Sparse Calibration-Based Personalization of Kernel-Based Gait Phase and Speed Estimation Using Wearable IMUs",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "430070",
          "name": "Cha, MyeongJu",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "196856",
          "name": "Hur, Pilwon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Exoskeleton Robot",
        "Rehabilitation Robot"
      ],
      "abstract": "This paper presents sparse calibration-based personalization for kernel-based gait phase and walking speed co-estimation from wearable inertial measurement units (IMUs). A 28-speed reference library was constructed from bilateral thigh and shank trajectories in a 20-subject locomotion dataset. Rather than directly applying population-average kernels, the method combines a user-specific baseline estimated from three calibration speeds with a principal-component (PC) model of baseline-centered kinematic deviations. Offline validation showed that personalized kernels reduced phase error relative to the population kernel. In a single-participant online pilot evaluation, the personalized kernels produced numerically lower mean phase and speed errors and ran in real time on embedded hardware. However, the speed effect was not significant, and pairwise phase differences did not remain significant after multiple-comparison correction. The pilot evaluation establishes wearable implementation feasibility while indicating reference-to-online dataset mismatch and the need for larger-cohort validation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_43"
    },
    {
      "id": "WePo3P.44",
      "paperId": "259",
      "title": "Robust Anatomical Thigh-Angle Estimation in Hip Assistive Robots Using Robot-Mounted Biomechanical Cues",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "309566",
          "name": "Ko, Chanyoung",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "526200",
          "name": "Kim, Rakyoung",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "100740",
          "name": "Kong, Kyoungchul",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Exoskeleton Robot",
        "Sensors and Signal Processing",
        "Rehabilitation Robot"
      ],
      "abstract": "Hip assistive robots can exhibit a discrepancy between the robot-derived thigh angle and the human thigh angle because the robot and wearer do not form a perfectly aligned kinematic chain. We propose a compact causal temporal convolutional network (TCN) that estimates the human thigh angle using only the bilateral robot-derived thigh angles and trunk inertial measurement unit (IMU) yaw. No actuator-current or motion-capture input is required at inference. In a 16- fold leave-one-subject-out evaluation of no-assist walking, Overall mean absolute error (MAE) decreased from 6.720◦for the uncorrected robot-derived angle and 3.845◦for a thigh-only TCN to 3.570◦(p = 0.0386 versus the thigh-only model). Separate condition-shift tests evaluated assisted, 1.25-m/s, and stop-and-go walking without using the corresponding test condition for model training or validation. Overall MAE was 35.3–52.9% lower than that of the uncorrected robot-derived angle. During robot-connected streaming on a Jetson Orin NX, mean algorithm latency was 2.642 ms (99th percentile 3.380 ms; maximum 5.522 ms), and all 15,000 timed samples were below the 10-ms controller period.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_44"
    },
    {
      "id": "WePo3P.45",
      "paperId": "481",
      "title": "Real-Time Gait Phase Detection in Wearable Hip-Assistive Robots: A Lightweight K-NN Approach with Grid-Based Decision Boundary Sampling",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528424",
          "name": "Koo, Seonmin",
          "affiliation": "Sangmyung University"
        },
        {
          "id": "528449",
          "name": "Jung, Mingyu",
          "affiliation": "Sangmyung University"
        },
        {
          "id": "528447",
          "name": "Jang, Woohyeok",
          "affiliation": "Sangmyung University"
        },
        {
          "id": "159832",
          "name": "Choi, Hyunjin",
          "affiliation": "Sangmyung University"
        }
      ],
      "keywords": [
        "Exoskeleton Robot",
        "Human-Robot Interaction",
        "Rehabilitation Robot"
      ],
      "abstract": "This paper proposes a lightweight k-Nearest Neighbors (k-NN) based real-time gait phase detection framework tailored for resource-constrained embedded environments in wearable hip-assistive robots. Although deep learning algorithms can provide accurate gait detection, their computational and memory requirements often limit deployment on low-level microcontrollers. To address this limitation, the proposed framework utilizes only embedded sensor data from the hip-assistive robot and employs a compressed reference dataset generated using the Grid-based Decision Boundary Sampling (GDBS) algorithm. The proposed framework achieved an accuracy of 93.85%±0.5% using only 100 reference points, while maintaining performance comparable to that obtained with the full 550,000 sample baseline pool. This data compression strategy reduced execution delays and RAM consumption, enabling stable operation within a 1 ms loop on a low-power microcontroller unit for reliable continuous gait phase detection.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_45"
    },
    {
      "id": "WePo3P.46",
      "paperId": "533",
      "title": "Braking-Phase Energy Driving Ankle Assistance: A Pilot Study",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526551",
          "name": "Nguyen, Thanh Xuan",
          "affiliation": "Gyeongsang National University"
        },
        {
          "id": "465765",
          "name": "Barati, Hossein",
          "affiliation": "Gyeongsang National University"
        },
        {
          "id": "105690",
          "name": "Park, Young Jin",
          "affiliation": "Gyeongsang National University(GNU)"
        }
      ],
      "keywords": [
        "Exoskeleton Robot",
        "Human-Robot Interaction",
        "Robotic Applications"
      ],
      "abstract": "Adaptive ankle assistance requires assistive output to vary according to the user’s activity intensity. This study investigates whether braking-phase energy-related quantities can serve as a compact descriptor of activity intensity and determine push-off assistance. A control framework was developed in which absorbed braking energy is used to estimate assistance magnitude and define the push-off energy budget. Rather than prescribing a time-driven or gait-phase-driven torque trajectory, the proposed method determines assistance from absorbed braking energy, regulates torque according to the remaining energy budget, and generates the assistance profile through interaction with the device. The framework was implemented on an ankle assistive device through hopping experiments involving four participants performing 40-second repeated hopping tasks with varying movement intensities. The results confirmed the intended braking-to-push-off mapping, with strong torque correlation (r=0.957,R^2=0.916) and an energy recovery ratio consistent with the prescribed energy budget (η_fit=0.878,R^2=0.975). Residual deviations from ideal linearity and repeatable torque profiles across cycles indicate practical fidelity for adaptive energy-based assistance. This pilot study will be extended to evaluate physiological benefits and to other locomotor tasks.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_46"
    },
    {
      "id": "WePo3P.47",
      "paperId": "573",
      "title": "Preliminary Investigation of Exoskeleton-Type Gait Assistance Device for Patients with Complete Lower-Limb Paralysis",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528745",
          "name": "Shimizu, Genta",
          "affiliation": "Osaka Electro-Communication University"
        },
        {
          "id": "109107",
          "name": "Jeong, Seonghee",
          "affiliation": "Osaka Electro-Comunication University"
        },
        {
          "id": "361901",
          "name": "Ogawa, Katsushi",
          "affiliation": "Osaka Electro-Communication University"
        },
        {
          "id": "463825",
          "name": "Aoyama, Hiroki",
          "affiliation": "Aino University"
        }
      ],
      "keywords": [
        "Exoskeleton Robot",
        "Robot Mechanism and Control"
      ],
      "abstract": "More than 100,000 individuals in Japan are estimated to suffer from spinal cord injuries, and patients with severe lower-limb paralysis often rely on wheelchairs for mobility. To support future exoskeleton-type walking assistance systems for such users, a human-scale postural control platform was developed. The proposed platform employs rocker-shaped feet instead of actively controlled ankle joints and consists of four degrees of freedom corresponding to the hip and knee joints of both legs. Standing stabilization is achieved through knee joint torque control combined with gravity compensation. Numerical simulations and hardware experiments were conducted to evaluate the effectiveness of the proposed method. The results demonstrated that the platform could maintain a stable upright posture and recover from external disturbances without active ankle control. These findings confirm the feasibility of the proposed approach as a preliminary step toward the development of autonomous balance control for exoskeleton-type walking assistance systems.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_47"
    },
    {
      "id": "WePo3P.48",
      "paperId": "70",
      "title": "A VAD-Based Kinematic Evaluation Framework for Generated Gestures in Companion Robots",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "360179",
          "name": "Lim, Yoongu",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "525319",
          "name": "Jeong, Hong-Ju",
          "affiliation": "University of Science and Technology(UST)"
        },
        {
          "id": "155753",
          "name": "Lee, Duk Yeon",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "243391",
          "name": "Choi, Dongwoon",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "141159",
          "name": "Lee, Dong-Wook",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Human-Robot Interaction"
      ],
      "abstract": "This paper introduces a VAD-based kinematic evaluation framework for generated gestures in companion robots, where VAD represents valence, arousal, and dominance. The proposed system generates robot gesture sequences from emotion-dominant idiomatic expressions using a large language model and evaluates whether the generated motions show affective tendencies consistent with the predicted emotion profile. The framework maps measurable kinematic features of each gesture into a VAD space. Arousal is estimated from motion velocity, acceleration, and hold ratio. Dominance is computed from range of motion and vertical upward motion tendency, while valence is estimated from jerkiness, irregularity, and burstiness. The resulting motion-derived VAD values are compared with reference VAD values obtained from the emotion profile classified by the language model. These reference values are used as affective tendency points rather than definitive ground-truth labels. For preliminary quantitative evaluation, a controlled dataset was constructed using eight emotion categories, five idioms per emotion, and five generated attempts per idiom, resulting in 200 gesture samples. The proposed framework provides a measurable basis for analyzing affective tendencies in generated gestures and supports future reinforcement-learning-based motion refinement.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_48"
    },
    {
      "id": "WePo3P.49",
      "paperId": "220",
      "title": "Communication-Blackout-Aware MPC for Mobile Relay Robot Deployment in Indoor Disaster Environments",
      "session": "WePo3P",
      "date": "2026-10-28",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "409258",
          "name": "Kim, Dong Ju",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "300215",
          "name": "Kim, Sung Jae",
          "affiliation": "Pukyoung National University"
        },
        {
          "id": "131893",
          "name": "Suh, Jinho",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "Reliable wireless communication is essential for teleoperated mobile robots operating in indoor disaster environments. However, walls, shelves, corridors, and non-line-of-sight propagation can cause rapid degradation of the received signal strength indicator (RSSI), resulting in communication blackout and unstable teleoperation. This paper proposes a learned communication-blackout-aware model predictive control (MPC) framework for mobile relay robot deployment. A lightweight blackout-risk estimator is trained using simulated RSSI transition samples and predicts the probability of future blackout from safe RSSI, RSSI rate, inter-node distance, obstacle blocking count, and RSSI deficit. The estimated blackout risk is incorporated into the MPC cost function together with RSSI violation and safety-guard terms, and an RSSI-safeguarded action selection limits excessive instantaneous RSSI degradation caused by the learned risk term. Simulation results in a warehouse-type indoor environment show that the proposed method achieves the highest average worst-link RSSI, the lowest RSSI violation count, and the lowest mean blackout risk compared with distance-based deployment, connectivity-aware reactive control, and RSSI-constrained MPC.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_2.html#wepo3p_49"
    },
    {
      "id": "ThAT1.1",
      "paperId": "569",
      "title": "Absolute Stability Analysis for Switched Lurie Systems Via Quadratically Discretized Lyapunov Functions",
      "session": "ThAT1",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528408",
          "name": "Jiang, Zhiwen",
          "affiliation": "University of Jinan"
        },
        {
          "id": "528314",
          "name": "Yang, Wei",
          "affiliation": "University of Jinan"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "本文探讨了 switched 的绝对稳定性 Lurie 系统在模式依赖最小停留条件下 时间（MDMDT）策略。绝对的充分条件 稳定性通过二次方位建立 离散化的李雅普诺夫–卢里函数。与 传统的线性离散化李雅普诺夫函数 方法中，所提方法能够实现更准确的拟合， 从而显著降低了 稳定性标准。理论的有效性 结果通过数值示例进行展示。",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that1_01"
    },
    {
      "id": "ThAT1.2",
      "paperId": "106",
      "title": "Zero-Order-Hold Triggered Gain Scheduling Control for Hovering Control of a Quadrotor",
      "session": "ThAT1",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525548",
          "name": "Kwak, Minseok",
          "affiliation": "Dong-A University"
        },
        {
          "id": "273952",
          "name": "Choi, Ho-Lim",
          "affiliation": "Dong-A University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "In this paper, we study a zero-order-hold (ZOH) triggered gain-scheduling controller for hovering control of a quadrotor under time-varying mass. The controller is designed by treating the time-varying mass as the scheduling variable. Due to the ZOH mechanism, the proposed controller is updated intermittently, which provides the advantage of reducing communication resource usage and computational burden. The stability of the closed-loop quadrotor system is established using Lyapunov theory and the Razumikhin theorem. It is shown that the closed-loop system remains bounded, and the ultimate bound is explicitly characterized as a function of the interexecution time. Finally, the effectiveness and validity of the proposed method are demonstrated through simulation studies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that1_02"
    },
    {
      "id": "ThAT1.3",
      "paperId": "195",
      "title": "Low-Speed Stability and Steering Assistance of PTWs Using a Cooperative Rider Strategy",
      "session": "ThAT1",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523950",
          "name": "Qureshi, Usama Samad",
          "affiliation": "Loughborough University"
        },
        {
          "id": "481961",
          "name": "Fleming, James",
          "affiliation": "Loughborough University"
        },
        {
          "id": "525835",
          "name": "Hubbard, Peter",
          "affiliation": "Loughborough University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Motorcycle manoeuvring at low speeds is particularly demanding due to the reduced stability, which increases the rider’s effort during cornering. This paper presents a steering-torque assistance strategy designed to support the rider by reducing effort while maintaining stable and accurate roll tracking. Modelling the rider as a PD controller acting on the roll angle of the bike, we investigate a co-operative control framework in which an inverse rider model is used to estimate the rider's internal tracking error, which is fed to a controller providing torque assistance on the steering column of the bike. Simulation results using a validated linearised model from the motorcycle simulation software FastBike demonstrate that the proposed approach reduces the rider’s peak torque from 3.5 Nm to 1.5 Nm, while also improving stability during low-speed cornering. To reflect realistic variations in rider behavior, ±20% changes in rider parameters are considered, and results show that the error signal is still estimated accurately with this model mismatch.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that1_03"
    },
    {
      "id": "ThAT1.4",
      "paperId": "216",
      "title": "Scenario-Based CVaR-MPC for Adaptive Cruise Control: A Parametric Study with Time-Headway Risk under Gaussian Mixture Driver Models",
      "session": "ThAT1",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526049",
          "name": "Sung, Jiho",
          "affiliation": "Hanyang University"
        },
        {
          "id": "349261",
          "name": "Han, Kyoungseok",
          "affiliation": "Hanyang University"
        },
        {
          "id": "135504",
          "name": "Chung, Chung Choo",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Autonomous Vehicle Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "This paper presents a parametric analysis of scenario-based conditional value-at-risk model predictive control (CVaR-MPC) for adaptive cruise control under stochastic leading-vehicle behavior modeled by Gaussian mixture models (GMMs). We study the effect of the CVaR confidence level α: under profile-matched and mismatched plant/controller GMM libraries, benchmarking CVaR-MPC against nominal MPC and RSS-soft, a soft-penalty baseline based on Responsibility-Sensitive Safety (RSS). We tested 1,000 rollouts under an under-prepared mismatch, where the controller used a milder GMM profile than the plant. Increasing alpha from 0 to 0.99 reduced the fraction of rollouts violating the velocity-dependent time-headway boundary d risk ( v e ) from 48.4 to 40.8. Over the same range, the 5th percentile of the minimum inter-vehicle distance increased from 1.30 to 2.07m. Even at alpha=0, CVaR-MPC reduced the d risk violation rate from 62.5% for nominal MPC to 48.4% because its empirical CVaR term remains active as a positively weighted sample-mean risk penalty. RSS-soft yielded larger minimum inter-vehicle distances, but these did not translate into a lower violation rate for d risk . This discrepancy arises from the different velocity dependence of the RSS and time-headway boundaries, which can reverse their ordering. Together, these results clarify how alpha tunes lower-tail protection within CVaR-MPC and why comparisons with RSS-soft depend on the safety metric used for evaluation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that1_04"
    },
    {
      "id": "ThAT1.5",
      "paperId": "366",
      "title": "Strict Control Barrier Functions and Safe Feedback for Open Sets",
      "session": "ThAT1",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "405509",
          "name": "Aoki, Haruto",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "319322",
          "name": "Kitamura, Tomoya",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "117320",
          "name": "Nakamura, Hisakazu",
          "affiliation": "Tokyo University of Science"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "This paper establishes a converse theorem for strict control barrier functions. For merely continuous control-affine systems, we formulate safety as forward completeness of the closed-loop system on the safe set, requiring every maximal solution to be complete. We prove that the existence of a strict control barrier function is equivalent to the existence of a continuous safe feedback. The key ingredients of the proof are a partition-of-unity feedback construction and a Lyapunov-like characterization of forward completeness. We also show that, whenever a continuous safe feedback exists, a smooth safe feedback can be chosen.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that1_05"
    },
    {
      "id": "ThAT1.6",
      "paperId": "681",
      "title": "Usage of MEGNO for the Realization of Chaotic and Unstable Regimes in PID-Based Control Systems",
      "session": "ThAT1",
      "date": "2026-10-29",
      "start": "10:15",
      "end": "10:30",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "532271",
          "name": "Silye, Zoltán",
          "affiliation": "University of Southern Denmark"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "We applied the Mean Exponential Growth Factor of Nearby Orbits (MEGNO) to the gain-space of a PD-controlled two-axis coupled gimbal system. The MEGNO is a “fast-indicator” that has been developed to identify chaotic from quasi-periodic structures of dynamical systems (originally in astrodynamics), yet to be applied to PID-controlled systems. MEGNO serves as the main engine for the analysis of our system, used with an additional external classification layer (later introduced as Eigenvalue-Comparison Classification), based on a newly established relationship that states that the closed-loop Jacobian’s dominant eigenvalue λ* predicts the asymptotic MEGNO slope as λ*/2; allowing us to use it in systems with an isolated dissipative equilibrium. In the used apparatus the Eigenvalue-Comparison Classification (ECC) method successfully identified the absence of bounded chaotic regimes across 927 stable gain points with the maximum residual between the predicted and the measured slope being 0.024, meaning the system is cleanly bimodal.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that1_06"
    },
    {
      "id": "ThAT2.1",
      "paperId": "438",
      "title": "Reinforcement Learning-Based MIT Impedance Control for a Two-Wheel-Legged Robot (I)",
      "session": "ThAT2",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528310",
          "name": "Yun, Tae Uan",
          "affiliation": "Myongji University"
        },
        {
          "id": "113230",
          "name": "Choi, Dongil",
          "affiliation": "Myongji University"
        },
        {
          "id": "528151",
          "name": "Kong, Won Ung",
          "affiliation": "Myongji University"
        },
        {
          "id": "528121",
          "name": "Ryu, Sang Soo",
          "affiliation": "Myongji University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Two-wheeled legged robots combine the eﬀiciency of wheeled locomotion with the posture regula- tion capability of legged mechanisms. However, stabilizing body height and attitude remains challenging under disturbances and varying contact conditions because wheel-ground contact and leg joint dynamics are coupled. Although reinforcement learning has been applied to such robots, position-based control supports stable policy learning but limits direct torque regulation, whereas torque-based control enables direct torque regulation but makes learning more diﬀicult. To address this trade-off, this paper proposes a reinforcement learning-based ac- tion structure that generates joint torques through an MIT impedance controller rather than directly outputting them from the policy. The policy outputs target position offsets and feedforward torques for the leg joints, and target velocities and feedforward torques for the wheel joints. The controller combines feedback torques with policy-generated feedforward torques, preserving a stable feedback structure while providing additional torque for post-disturbance recovery. The proposed policy was trained in an IsaacLab-based simulation environment and compared with position-based and torque-based control policies under vertical disturbances. Experimental results show that the proposed MIT impedance control achieved up to 13.9% lower body height drop and 36.5% shorter recovery time than position control, and up to 15.4% lower body height drop and 58.2% shorter recovery time than torque control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that2_01"
    },
    {
      "id": "ThAT2.2",
      "paperId": "472",
      "title": "Validation of Tracked Vehicle Dynamic Simulation Using a Small Tracked Robot Testbed (I)",
      "session": "ThAT2",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "321728",
          "name": "Cho, HoYeon",
          "affiliation": "Hanyang University"
        },
        {
          "id": "528404",
          "name": "Oh, Minyeong",
          "affiliation": "Hanyang University"
        },
        {
          "id": "194767",
          "name": "Yoo, Sungkeun",
          "affiliation": "Keimyung University"
        },
        {
          "id": "171061",
          "name": "Kim, Taegyun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing",
        "Robot Vision"
      ],
      "abstract": "Tracked vehicles provide stable traction and high mobility on rough terrain, but their dynamic behavior is difficult to predict because many track links, sprockets, idlers, and terrain contacts interact simultaneously. This study presents an experimental validation procedure for a dynamic simulation model of a small tracked robot designed for laboratory rough-terrain mobility tests. The main contribution is to incorporate experimentally identified track-chain backlash and stiffness into a Project Chrono multibody dynamics model and to validate the resulting model directly against the physical robot using a vision-based three-dimensional measurement system. A compact tracked robot, an adjustable driving testbed, a chain stiffness measurement testbed, and a camera-based measurement system were developed. In the simulation, adjacent chain links are connected by 6-DOF bushing elements that represent hinge motion, backlash, and stiffness characteristics. Validation focuses on slope-driving and obstacle-climbing behavior by comparing velocity, slip ratio, climbability, and selected 6-DOF pose peak values. The proposed model is also compared with a baseline simple-hinge track-chain model.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that2_02"
    },
    {
      "id": "ThAT2.3",
      "paperId": "497",
      "title": "Physical AI and Military Robots Session (I)",
      "session": "ThAT2",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528525",
          "name": "Lee, Jiwoo",
          "affiliation": "Kookmi Univ"
        },
        {
          "id": "109773",
          "name": "Cho, Baek-Kyu",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Reference-conditioned humanoid locomotion can benefit from future motion information, but the representation of this information is critical under motion transitions. Directly flattening a future reference trajectory gives the actor high-dimensional input and can propagate abrupt reference changes to the policy. This paper proposes a time-structured future motion embedding that combines explicit time tokens, temporal weighting, and a lightweight MLP encoder. Each future reference sample is augmented with normalized time and sampling-interval information, processed by a shared step-wise MLP, reweighted to emphasize near-future samples, and fused into a compact latent vector. The method is evaluated in an Isaac-based RoK-4 humanoid simulation using three direction-varied walking clips randomly cropped from LaFAN1 and retargeted to the robot. Under a three-seed transition-survival protocol, the proposed representation achieves the highest survival rate among current-reference-only, raw-future, no-time-token, and no-weighting baselines. The results suggest that future preview is most effective when represented as a temporally structured compact embedding rather than as a raw trajectory.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that2_03"
    },
    {
      "id": "ThAT2.4",
      "paperId": "507",
      "title": "Development and System Integration of a Front Double-Flipper Tracked Mobile Robot for Stair and Rough-Terrain Traversal (I)",
      "session": "ThAT2",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527665",
          "name": "Lee, Jaeyong",
          "affiliation": "Hanyang University"
        },
        {
          "id": "215088",
          "name": "Park, Jihyuk",
          "affiliation": "Hanyang University ERICA"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents the development and system integration of a front double-flipper tracked mobile robot for stair and rough-terrain traversal. The platform was designed for heavy-duty outdoor operation while reducing the mechanical complexity of the flipper mechanism. System requirements were derived with reference to the NIST/ASTM E54.09 response robot test methods, including traversal of 175 mm standard stairs, unstructured terrain, and payload capacity for perception and computation modules. Based on these requirements, the robot was configured with a central body, main tracks, and continuously rotating front flippers for obstacle negotiation and self-righting. The robot integrates a ROS2-based upper computer, a TI controller, CAN communication, motor drivers, and encoder feedback into a unified control architecture. In addition, camera, LiDAR, and IMU sensors were considered for future autonomous navigation and terrain perception. Gazebo simulation and preliminary hardware tests were conducted to verify the feasibility of the proposed platform and its system-level integration.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that2_04"
    },
    {
      "id": "ThAT2.5",
      "paperId": "554",
      "title": "Interaction-Aware Graph Neural Networks for Robotic Manipulation in Extremely Cluttered Environments (I)",
      "session": "ThAT2",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "413832",
          "name": "Lim, Chulyong",
          "affiliation": "Chung-Ang University"
        },
        {
          "id": "460899",
          "name": "Bae, WooYeol",
          "affiliation": "Chung-Ang University"
        },
        {
          "id": "494717",
          "name": "Jung, Hoyoung",
          "affiliation": "Chungang University"
        },
        {
          "id": "240412",
          "name": "Nam, Woochul",
          "affiliation": "Chung-Ang University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This work targets pick-and-place in extremely cluttered tabletop scenes in which many objects rest in mutual contact, observed by a single wrist-mounted RGB-D camera. Existing graph-based methods describe inter-object inter- actions through purely spatial predicates, which capture where objects sit relative to one another but not which object physically supports which. We propose an interaction-aware graph neural network that, from a single view, jointly infers a per-object structural role (INDEPENDENT, DEPEND, or SUPPORT), an occlusion state, and a target-conditioned stability score that estimates how the remaining structure would respond if a given object were removed. The three heads share a PointNet-based encoder and are trained jointly in simulation. Closed-loop evaluation under matched recovery dispatch shows that the proposed policy attains the highest first-attempt success rate across all evaluated clutter densities and consistently outperforms a ground-truth-contact heuristic and a depth-priority baseline, while also achieving the smallest displacement of the remaining structure during clearing.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that2_05"
    },
    {
      "id": "ThAT2.6",
      "paperId": "149",
      "title": "Tracking Continuity-Aware Local Path Planning for Human-Following Mobile Robots (I)",
      "session": "ThAT2",
      "date": "2026-10-29",
      "start": "10:15",
      "end": "10:30",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "488177",
          "name": "Shin, Heeseok",
          "affiliation": "Sejong University"
        },
        {
          "id": "525346",
          "name": "Yoon, Hyewon",
          "affiliation": "Seoul National University of Science and Technology"
        },
        {
          "id": "349960",
          "name": "Kwak, Jeonghoon",
          "affiliation": "Advanced Institute of Convergence Technology"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Autonomous Vehicle Systems",
        "Process Control Systems"
      ],
      "abstract": "Human-following mobile robots require local navigation strategies capable of simultaneously maintaining collision-free motion, stable following geometry, and tracking continuity. Conventional local planners such as Rapidly-exploring Random Trees (RRT) and the Dynamic Window Approach (DWA) primarily emphasize obstacle avoidance and motion feasibility, often resulting in unstable following behavior or delayed recovery when obstacles interfere with the desired path or temporary target occlusion occurs. This paper proposes a Tracking Continuity-Aware Reactive Planner (TCARP) for human-following mobile robots. TCARP integrates dynamic follow-point generation, condition-aware reactive planning, and predictive continuity recovery within a unified local-planning framework. Experiments conducted using an Autonomous Mobile Robot platform under obstacle-interfered environments demonstrated that TCARP reduced follow-point tracking error by approximately 47–49% and target-centering error by approximately 75–81% compared with DWA while maintaining comparable navigation feasibility. These results indicate that explicitly incorporating tracking continuity into local planning improves human-following robustness and navigation consistency.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that2_06"
    },
    {
      "id": "ThAT3.1",
      "paperId": "66",
      "title": "Network-Aware Path Planning with Machine Learning Based Propagation Models for Autonomous Robots in Wi-Fi Mesh Networks (I)",
      "session": "ThAT3",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523326",
          "name": "Tsuruta, Takehiro",
          "affiliation": "Takenaka Corporation"
        },
        {
          "id": "124267",
          "name": "Hasegawa, Tadahiro",
          "affiliation": "Shibaura Institute of Technology"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper proposes a network-aware path planning method for autonomous mobile robots in construction sites equipped with Wi-Fi mesh networks. The method addresses the trade-off between efficient navigation and reliable wireless communication through an integrated framework. First, an empirical relationship between relay hop count and throughput degradation is established. Second, a machine learning based radio propagation model predicts the received signal strength (RSS) heatmap from floor plan information. Wireless communication quality cost map is created based on these two components. Finally, A* path planning is applied to the cost map with configurable weighting parameters, enabling flexible trade-offs between travel distance and wireless communication quality. The proposed method was validated through experiments in a real indoor environment equipped with Wi-Fi mesh network, where an autonomous mobile robot was navigated planned paths while measuring actual throughput. The results demonstrate that the proposed method effectively predicts wireless communication quality and enables network-aware navigation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that3_01"
    },
    {
      "id": "ThAT3.2",
      "paperId": "117",
      "title": "Feasibility Study of a Semi-Automated Self-Catheterization Assistive Device for Women with Disabilities and the Elderly (I)",
      "session": "ThAT3",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525640",
          "name": "Wang, Seungeun",
          "affiliation": "School of Mechanical Engineering, Pusan National University"
        },
        {
          "id": "406468",
          "name": "Kim, Jungho",
          "affiliation": "Pusan National University"
        },
        {
          "id": "525635",
          "name": "Sungchul, Huh",
          "affiliation": "Department of Rehabilitation Medicine, Pusan National University Yangsan Hospital"
        },
        {
          "id": "525636",
          "name": "Yuna, Kim",
          "affiliation": "Department of Rehabilitation Medicine, Pusan National University Yangsan Hospital"
        },
        {
          "id": "525637",
          "name": "Sejung, Lee",
          "affiliation": "Department of Industrial Engineering, Pusan National University"
        },
        {
          "id": "450818",
          "name": "Jin, Sangeun",
          "affiliation": "Pusan National University"
        },
        {
          "id": "525914",
          "name": "Lee, Dogyu",
          "affiliation": "Department of Rehabilitation Medicine, Pusan National University Yangsan Hospital"
        },
        {
          "id": "228195",
          "name": "Kwon, Junghan",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": "Neurogenic lower urinary tract dysfunction (NLUTD) patients require stable bladder function and effective residual urine management to prevent complications and improve quality of life. Although clean intermittent catheterization (CIC) is widely used, female patients often experience difficulty locating the urethral opening and aligning the catheter due to anatomical constraints, resulting in low adherence and high discontinuation rates. Existing assistive devices provide only limited support, such as securing the field of view or stabilizing the device. To address these limitations, this study proposes a semi-automated self-catheterization assistive device that integrates camera-based urethral recognition and active catheter alignment. The proposed system identifies the urethral position using a vision-based algorithm and employs a two-stage framework in which user-guided tracking is initially applied under limited data conditions, followed by gradual transition to an AI-based automatic detection model using accumulated personalized data. In addition, two pan–tilt motors actively align the catheter tip toward the detected urethral opening through real-time feedback control. A prototype system and urethral dummy model were developed to evaluate the feasibility and quantitative performance of the proposed approach. Experimental results demonstrated the feasibility of the proposed system for supporting independent female self-catheterization.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that3_02"
    },
    {
      "id": "ThAT3.3",
      "paperId": "157",
      "title": "Stabilizing Parallel Reinforcement Learning for Robotics Via Early-Phase Bellman Target Clipping (I)",
      "session": "ThAT3",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "468759",
          "name": "Shim, MokYoung",
          "affiliation": "Pusan National University"
        },
        {
          "id": "525881",
          "name": "Jeong, Kyeongeop",
          "affiliation": "Pusan University"
        },
        {
          "id": "389789",
          "name": "Park, Jonghyeok",
          "affiliation": "Pusan University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Increasing parallelism in reinforcement learning (RL) can destabilize training and reduce sample efficiency, especially at higher update-to-data (UTD) ratios, limiting the scalability of massively parallel, high-throughput RL pipelines. This work investigates why standard RL training becomes unstable in this regime. Our analysis reveals that instability is driven by early-stage value divergence: during the initial phase, high-frequency updates on highly correlated data amplify bootstrapping errors, destabilizing the critic and triggering policy collapse. To counteract this mechanism, we propose Bellman Target Clipping (BeTC), a minimally invasive stabilization technique that clips Bellman targets only during the early phase of training. After this early-phase intervention, training proceeds with the original baseline algorithm. Notably, this technique is simple and avoids potentially harmful algorithmic interventions, yet mitigates a fundamental source of instability in parallel RL throughout the entire training run. Experiments on six continuous-control benchmarks in Brax with 2048 parallel environments show that BeTC significantly stabilizes training at UTD = 1.0, achieving a 2.6× higher normalized return after 1 million environment steps than the non-clipped baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that3_03"
    },
    {
      "id": "ThAT3.4",
      "paperId": "190",
      "title": "MPC Cost Design for Yielding Behavior of Autonomous Mobile Robots in Narrow Passages (I)",
      "session": "ThAT3",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526027",
          "name": "Higashi, Takaya",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "255348",
          "name": "Fukuda, Hiroaki",
          "affiliation": "Shibaura Institute of Technology"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Mechanism and Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes an extended Model Predictive Control (MPC) cost design to induce yielding behavior in autonomous mobile robots navigating narrow passages. To resolve deadlocks without explicit mode-switching, we introduce two specific cost terms: a forward-suppression term that discourages motion toward the goal, and a lateral-evacuation term that promotes movement into available side spaces. By integrating these terms into the continuous optimization process, robots generate complex behavior such as waiting, retreating, and side-evacuation naturally as optimal solutions. Simulation results across five scenarios demonstrate that this approach consistently improves task completion and reduces travel time compared to basic goal-tracking MPC, effectively resolving deadlocks in constrained environments. Additionally, the study identifies performance limitations regarding evacuation space and input constraints, providing insights for practical robot navigation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that3_04"
    },
    {
      "id": "ThAT3.5",
      "paperId": "219",
      "title": "A Study on Power-Based Anomaly Detection Technique for Ensuring Operational Stability of Autonomous Drones (I)",
      "session": "ThAT3",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "388523",
          "name": "Jang, Jae-Hun",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "461859",
          "name": "Byun, Sung-Jun",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "130236",
          "name": "Lee, Kyung-Chang",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Autonomous drones are used in a wide range of fields, including military, security, and agriculture, and their applications are expanding. An autonomous drone is a drone that performs tasks such as route planning, control, perception, and decision-making without direct human intervention. A power supply is essential for drones to carry out their missions, and the power consumed by drones depends on flight characteristics such as mission conditions and flight patterns. Accordingly, to ensure the stable operation of drones, it must be possible to detect anomalies in the current status based on power consumption, taking into account mission conditions and flight patterns. In this paper, we propose an anomaly detection method for identifying abnormal power consumption patterns. The proposed method utilizes a CNN-based autoencoder to detect power anomalies based on the relationships among input features through a process of compression and reconstruction. Experimental results confirm that the proposed method is capable of reliably detecting anomalies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that3_05"
    },
    {
      "id": "ThAT4.1",
      "paperId": "278",
      "title": "Data-Enabled Predictive Control with Predictive Adaptive Line-Of-Sight Guidance for 3-D Path Following of Autonomous Underwater Vehicles",
      "session": "ThAT4",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525941",
          "name": "Zieglmeier, Sebastian",
          "affiliation": "University of Oslo"
        },
        {
          "id": "296290",
          "name": "Hudoba de Badyn, Mathias",
          "affiliation": "ETH, Zürich"
        },
        {
          "id": "525947",
          "name": "Warakagoda, Narada Dilp",
          "affiliation": "Norwegian Defense Research Establishment"
        },
        {
          "id": "226344",
          "name": "Krogstad, Thomas Røbekk",
          "affiliation": "Forsvarets Forskningsinstitutt"
        },
        {
          "id": "525979",
          "name": "Engelstad, Paal",
          "affiliation": "University of Oslo"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper presents a fully data-driven 3-D path-following framework for autonomous underwater vehicles (AUVs), a representative class of underwater field robotics, based on Data-Enabled Predictive Control (DeePC). The approach eliminates explicit hydrodynamic modeling by exploiting measured input-output trajectories to predict and optimize future system behavior. Classic DeePC is employed for heading control, while a cascaded DeePC architecture with loop-frequency separation is proposed for depth regulation, extending DeePC to plants whose dominant output evolves significantly slower than the actuator bandwidth. For 3-D waypoint path following, the Adaptive Line-of-Sight (ALOS) guidance law is extended to a predictive multistep formulation (PALOS) that supplies the horizon-consistent reference required by receding-horizon predictive controllers. All methods are validated in high-fidelity 6 degrees of freedom simulation on the REMUS 100 AUV under nominal operation, ocean-current disturbances, operation beyond the data regime, and 3-D waypoint path following, consistently outperforming the corresponding state-of-the-art benchmarks. In 3-D waypoint path following, the framework reduces cross-track error by approximately 28% relative to the ALOS-PI/PID baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that4_01"
    },
    {
      "id": "ThAT4.2",
      "paperId": "605",
      "title": "3-D Coverage-Aware Velocity Obstacles (3-D CAVO) : A Safe Motion Planner with Target Visibility Enhancement for Autonomous Monitoring",
      "session": "ThAT4",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "519614",
          "name": "C, Harishwar",
          "affiliation": "Indian Institute of Technology Madras"
        },
        {
          "id": "467193",
          "name": "A, Vivek",
          "affiliation": "Indian Institute of Technology Madras"
        },
        {
          "id": "519612",
          "name": "S, Ashwin Kumar",
          "affiliation": "University of Birmingham"
        },
        {
          "id": "519609",
          "name": "Shah, Rohan Bhupen",
          "affiliation": "Indian Institute of Technology Madras"
        },
        {
          "id": "195837",
          "name": "Ghosh, Satadal",
          "affiliation": "Indian Institute of Technology Madras"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Autonomous aerial monitoring has become important for applications such as infrastructure (a.k.a.'target') inspection and surveillance, where consistent and efficient coverage is critical. However, reactive strategies ensuring collision avoidance in cluttered, dynamic environments may degrade target visibility, thereby resulting in poorer coverage and less effective monitoring. Thus, ensuring motion safety while simultaneously achieving sufficiently high visual coverage of the target remains a major challenge. To address this, a unified framework that amalgamates velocity obstacles (VO)-based avoidance strategy with a coverage recovery mechanism for enhancement of target visibility in 3-D environment is presented in this paper. The novelty of the developed local reactive motion planner, named as '3-D Coverage-Aware Velocity Obstacles' (3-D CAVO), lies in coupling geometric visibility constraints with collision avoidance and introducing a superimposed local sweep strategy on a vertical surface based on the VO-governed avoidance path and resulting in coverage loss. This enables velocity-level geometric collision avoidance and bounded velocity commands under the single-integrator model, while improving projected target-surface coverage. Software-in-the-Loop (SITL) simulation results are presented to illustrate the effectiveness of the developed reactive motion planner in maintaining safety of UAV motion, while enhancing target visibility and coverage in an aerial monitoring mission.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that4_02"
    },
    {
      "id": "ThAT4.3",
      "paperId": "563",
      "title": "ESKF-Based LiDAR–IMU Localization Considering Grass-Height-Induced Bias for Autonomous Mowers on Slopes",
      "session": "ThAT4",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525782",
          "name": "Mizuta, Ren",
          "affiliation": "University of Tsukuba"
        },
        {
          "id": "525820",
          "name": "Yonezawa, Masahito",
          "affiliation": "Workauto Inc"
        },
        {
          "id": "525780",
          "name": "Suzuki, Ren",
          "affiliation": "Workauto Inc"
        },
        {
          "id": "101293",
          "name": "Ohya, Akihisa",
          "affiliation": "University of Tsukuba"
        },
        {
          "id": "164643",
          "name": "Yorozu, Ayanori",
          "affiliation": "University of Tsukuba"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Accurate localization is essential for autonomous mowers in agricultural environments. However, LiDAR-based scan matching can degrade when grass-height variations cause discrepancies between a prior map and current observations. This study proposes an Error-State Kalman Filter (ESKF)-based localization method that models this effect as a grass-height-induced bias and estimates it online using ground-position observations obtained from the prior map by RANSAC-based ground-plane estimation. The estimated bias is incorporated into the localization process to compensate for systematic localization errors. Experiments in a sloped environment with different grass-height conditions between mapping and localization showed that the proposed method reduced the MAE from 0.16 m to 0.08 m and the RMSE from 0.17 m to 0.09 m, demonstrating the effectiveness of the proposed method without requiring map updates. The results indicate that the approach improves robustness against environmental changes and is suitable for long-term operation in agricultural environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that4_03"
    },
    {
      "id": "ThAT4.4",
      "paperId": "671",
      "title": "Task-Driven Retrieval-Augmented Generation for Human-Centered Ship Operation System Design",
      "session": "ThAT4",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "531062",
          "name": "Ao, Qing",
          "affiliation": "Northwestern Polytechnical University"
        },
        {
          "id": "532256",
          "name": "Yu, Suihuai",
          "affiliation": "Northwestern Polytechnical University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Navigation, Guidance and Control",
        "Information and Networking"
      ],
      "abstract": "Human-centred ship operation system design requires designers to translate distributed maritime standards, procedures, and human-factors knowledge into task-specific system requirements. However, direct large language model prompting lacks reliable evidence provenance, while conventional retrieval-augmented generation may retrieve topically relevant knowledge without sufficiently representing the operator, task condition, information need, and operational risk. This paper presents a task-driven RAG framework that decomposes a natural-language operation scenario into seven task elements and uses them to support query expansion, metadata-guided retrieval, and source-gated requirement generation. A prototype based on a 55-fragment seed knowledge base was examined through two preliminary cases: bridge alarm interpretation under low visibility and navigation monitoring in high-traffic waters. Direct prompting produced only uncertain suggestions, while Naive RAG generated two and five evidence-linked requirements in the two cases. Task-Driven RAG generated six evidence-linked preliminary requirements in each case. These case-based results suggest that explicit task modelling can strengthen the alignment between operation scenarios, retrieved evidence, and preliminary design requirements. Further work will expand the maritime knowledge base and conduct expert evaluation across more representative operation scenarios.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that4_04"
    },
    {
      "id": "ThAT4.5",
      "paperId": "644",
      "title": "Distributed Robust Principal Component Analysis for Object Detection by Multi-Agent Systems",
      "session": "ThAT4",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "532048",
          "name": "Tachi, Ryoha",
          "affiliation": "The University of Osaka"
        },
        {
          "id": "166474",
          "name": "Sakurama, Kazunori",
          "affiliation": "The University of Osaka"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Control Theory and Applications",
        "Information and Networking"
      ],
      "abstract": "In recent years, advances in technologies such as security cameras and drones have prompted growing demand for multi-view systems that process multiple images. Thereby, we develop a distributed Robust Principal Component Analysis (RPCA) method for object detection using images obtained from multiple images. RPCA is an algorithm that separates multiple images captured at different times into background and moving objects. We propose a multi-agent system that performs object detection by separating the background from the foreground using RPCA. However, the optimization problem in RPCA is generally solved through centralized updates. This approach raises issues such as communication bandwidth constraints and increased computational resource requirements, and it is unsuitable for application in a multi-agent system. Therefore, we formulate RPCA as a distributed optimization problem at the agent level. We then derive a distributed algorithm by solving this problem and verify the effectiveness of these algorithms through simulation. As a result, we have successfully developed a distributed system capable of object detection as a multi-agent system.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that4_05"
    },
    {
      "id": "ThAT5.1",
      "paperId": "103",
      "title": "Development of an Independent 3-DOF Flexion Kinesthetic Haptic Interface Using Electrostatic Clutches",
      "session": "ThAT5",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "334493",
          "name": "Lee, Nakhyeong",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "525421",
          "name": "Kong, Seohee",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "244519",
          "name": "Ma, Jihyeong",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "296627",
          "name": "Nam, Jongseok",
          "affiliation": "Korea Advanced Institute of Science & Technology (KAIST)"
        },
        {
          "id": "118310",
          "name": "Kyung, Ki-Uk",
          "affiliation": "Korea Advanced Institute of Science & Technology (KAIST)"
        }
      ],
      "keywords": [
        "Human-Robot Interaction"
      ],
      "abstract": "This study presents a kinesthetic haptic interface capable of independently constraining 3-DOF finger flexion using miniaturized electrostatic clutches. Conventional interfaces suffer from coupled joint control, where a single actuator constrains multiple joint angles, preventing complex interactions. We overcome this limitation by proposing a clutch-on-a-joint paradigm, placing modules directly on each finger joint. Key innovations enable this approach: (1) module miniaturization achieved via curvature-induced rigidity in the electrode film; (2) skin anchoring challenges resolved through a kinematically modeled rolling joint mechanism; and (3) a passive variable-length structure resolving kinematic overconstraint to restore range of motion. To validate the architecture, we conducted a blind user study using bending sensors. Results confirm the rolling joint successfully suppresses kinematic lash within the human proprioceptive limit (5°–9°). Participants accurately perceived independent joint constraints with up to 76% accuracy. These findings demonstrate this clutch-on-a-joint paradigm effectively decouples multi-joint constraints, delivering stable 3-DOF kinesthetic feedback.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that5_01"
    },
    {
      "id": "ThAT5.2",
      "paperId": "276",
      "title": "CARVE: Context-Preserving Attention Reweighting of Visual Evidence for Robust Vision-Language-Action Models",
      "session": "ThAT5",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526210",
          "name": "Kim, SeoHyun",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "112723",
          "name": "Park, Kwang-Hyun",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Vision-Language-Action (VLA) models can suffer substantial performance degradation when task-irrelevant visual contexts change at test time. This paper proposes CARVE, a training-free inference-time attention reweighting method for frozen VLA policies. CARVE identifies task-relevant regions using language-conditioned source/goal grounding and temporal gripper-centered cues, while preserving all visual tokens and suppressing persistent task-irrelevant attention sinks through soft attention reweighting. CARVE consistently improves performance across three representative VLA backbones in SIMPLER simulation and also demonstrates improved performance in real-world manipulation environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that5_02"
    },
    {
      "id": "ThAT5.3",
      "paperId": "289",
      "title": "Automation of Cellulose Filament Production Using Standardized Gripper Interface and Vision-Based Labware Detection",
      "session": "ThAT5",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "444256",
          "name": "Wang, Shuangyu",
          "affiliation": "The University of Tokyo"
        },
        {
          "id": "444250",
          "name": "Cheng, Xingyan",
          "affiliation": "The University of Tokyo"
        },
        {
          "id": "338746",
          "name": "Shiomi, Junichiro",
          "affiliation": "University of Tokyo"
        },
        {
          "id": "151588",
          "name": "Asano, Yuki",
          "affiliation": "The University of Tokyo"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Vision",
        "Industrial Applications of Control"
      ],
      "abstract": "Cellulose filament production based on Interfacial Polyelectrolyte Complexation (IPC) requires stable liquid handling and wet-drawing operations, where manual execution often introduces variability that affects filament quality. This paper presents a robotic automation system for cellulose filament production using a standardized gripper interface and vision-based labware detection. The proposed system integrates a 6-DOF robot arm, a depth camera, and a customized parallel gripper to perform automated laboratory procedures including pipetting, droplet handling, and filament drawing. A standardized gripper interface is designed to enable stable manipulation of multiple laboratory tools without modifying the gripper structure. To support autonomous operation, a vision-based framework is developed for labware localization through point cloud processing and OBB estimation, while lightweight visual recognition methods are employed for pipette tip recognition and droplet detection. Experimental evaluations are conducted through robotic pipetting and IPC filament generation. The system achieves reliable autonomous pipetting, with aspiration and dispensing times comparable to those of a human operator and a commercial pipetting device, although additional time is required for robotic tip attachment. In IPC experiments, the robotic system generates longer filaments with smaller mean diameters, higher mean Young’s modulus, and improved diameter uniformity compared with manual operation, demonstrating the potential of robotic execution to improve the repeatability and consistency of IPC-based cellulose filament production.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that5_03"
    },
    {
      "id": "ThAT5.4",
      "paperId": "91",
      "title": "Beyond Closed-Set Place Recognition: Unknown-Aware Few-Shot Novel Place Mapping",
      "session": "ThAT5",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "334319",
          "name": "Hong, Dasol",
          "affiliation": "KAIST"
        },
        {
          "id": "428840",
          "name": "Park, Juhye",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "217811",
          "name": "Chung, Dongha",
          "affiliation": "URobotics"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Human-Robot Interaction"
      ],
      "abstract": "This paper addresses unknown-aware few-shot novel place mapping for semantic and topological robot maps. Existing place mapping systems often assume that every place belongs to a predefined closed set of categories or can be retrieved from a pretrained open-vocabulary embedding space. This assumption is insufficient for real-world robot deployments, where environment-specific concepts such as a robot charging station or a user's study space may be absent from the current map. We formulate a mapping problem in which a robot detects places outside the known class set, keeps ambiguous observations unresolved when necessary, and registers learnable novel place classes from only a few support observations. The proposed formulation connects unknown detection and few-shot adaptation with semantic/topological mapping, enabling maps to represent base-known, novel-known, and unknown places in a unified structure.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that5_04"
    },
    {
      "id": "ThAT5.5",
      "paperId": "214",
      "title": "Gaussian Process Signed Distance Field for Safe Robot Navigation",
      "session": "ThAT5",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "436761",
          "name": "Aleman Gallegos, Jesus Enrique",
          "affiliation": "Bielefeld University"
        },
        {
          "id": "110312",
          "name": "Wachsmuth, Sven",
          "affiliation": "Bielefeld University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This work proposes a local environmental representation for safe mobile robot navigation based on a continuous Gaussian Process (GP) approximation of a discrete Signed Distance Field (SDF). The representation is constructed from local sensor measurements and provides a smooth, differentiable approximation of the surrounding environment. The proposed representation is evaluated in terms of computational performance, approximation accuracy, and navigation safety. In simulation, the Gaussian Process Signed Distance Field (GP-SDF) is embedded as a Control Barrier Function (CBF) into a Model Predictive Controller (MPC) and compared against the Dynamic Window Approach (DWA) and Model Predictive Path Integral (MPPI) controller, both of which rely on local information for obstacle avoidance. The results show that the proposed controller achieves lower failure rates, reducing failures from 43% with DWA and 25% with MPPI to 12% with the proposed solution in the most challenging scenario with 10 dynamic obstacles. The evaluation is conducted in a simulated service robot navigation scenario with static obstacles and moving pedestrians. The code repository is available at https://gitlab.ub.uni-bielefeld.de/dibami/gp-sdf-cbf_mpc .",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that5_05"
    },
    {
      "id": "ThAT5.6",
      "paperId": "410",
      "title": "PRISM-AD: Frequency-Specialised Reconstruction with Illumination and Uncertainty-Calibrated Expert Fusion for Industrial Anomaly Detection",
      "session": "ThAT5",
      "date": "2026-10-29",
      "start": "10:15",
      "end": "10:30",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528171",
          "name": "Ambangyung, Suttisak",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "528169",
          "name": "Raktham, Saritpop",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "416139",
          "name": "Ploysuwan, Tuchsanai",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Industrial Applications of Control",
        "Robot Vision"
      ],
      "abstract": "Detecting defects in manufactured products is difficult because defects vary widely in scale and appearance: a fine scratch disturbs only the local surface texture, a misaligned component alters the structural pattern, and a discolouration shifts the overall colour uniformly across a region. We present PRISM-AD (Precision-weighted Reconstruction with Illumination-conditioned Spectral Mixture), a reconstruction-based anomaly detector that addresses this variation by training three expert decoders to specialise on different frequency bands of the feature representation. Each expert learns to reconstruct normal patterns within its designated band; regions where reconstruction fails indicate anomalies. A router conditioned on scene illumination and frequency energy weights the experts, and a precision-weighted uncertainty fusion step down-weights locations where an expert's reconstruction is unreliable, suppressing false positives on chronically difficult texture; we measure the trained router and find its weights stay close to uniform, so the uncertainty term carries the fusion in practice. A frozen DINOv3 Vision Transformer provides the feature backbone; only normal images are required for training. On the full Real-IAD multi-view benchmark covering 30 product categories, PRISM-AD achieves S-AUROC 93.4, I-AUROC 90.8, and P-AUPRO 93.9, the strongest scores on all three metrics among the reconstruction-based baselines tabulated in the Real-IAD benchmark paper. A second stage uses a Vision Language Model to explain detected anomalies in structured natural language, so an inspector is shown where the flagged region is and what it looks like without any fine-tuning.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that5_06"
    },
    {
      "id": "ThAT6.1",
      "paperId": "428",
      "title": "Neural-Network-Based Nonlinear H-Infinity Attitude Control for a Quadcopter Via Backward Time Integration",
      "session": "ThAT6",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528245",
          "name": "Endo, Soichi",
          "affiliation": "Nagoya University"
        },
        {
          "id": "528246",
          "name": "Sasaki, Yasuo",
          "affiliation": "Nagoya University"
        },
        {
          "id": "125266",
          "name": "Hara, Susumu",
          "affiliation": "Nagoya University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Robot Mechanism and Control"
      ],
      "abstract": "This paper proposes a learning method to design a neural-network-based nonlinear H-infinity control law for a two-dimensional quadcopter. In the proposed method, training data for the nonlinear H-infinity control law are generated by executing backward time integration of Hamilton's canonical equations associated with the Hamilton-Jacobi-Isaacs (HJI) equation. In this process, the setting of initial states for the backward integration is critical to ensuring that the generated data are uniformly distributed across the state space. To address this challenge, we introduce and compare two terminal data generation strategies: level-surface sampling (Strategy A) and linearized-system prediction (Strategy B). By strategically deploying the terminal states along the system's stable modes, Strategy B effectively suppresses immediate numerical divergence and significantly extends the backward trajectory durations. This extended duration facilitates the learning of a more comprehensive and robust control law. Flight simulations under wind velocity disturbances demonstrate that the neural network controller trained via Strategy B achieves the lowest L2 norm ratio compared to both Strategy A and a conventional linear H-infinity control. These results confirm that the proposed method successfully captures a smooth, robust control law that enables extended horizontal translations without triggering abrupt attitude variations of the vehicle.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that6_01"
    },
    {
      "id": "ThAT6.2",
      "paperId": "24",
      "title": "Manifold-Constrained MPPI: Real-Time Sampling-Based Control under Hard Equality Constraints",
      "session": "ThAT6",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523694",
          "name": "Lee, Seulchan",
          "affiliation": "Kyung Hee University"
        },
        {
          "id": "160839",
          "name": "Kim, Sanghyun",
          "affiliation": "Kyung Hee University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Sampling-based model predictive control such as Model Predictive Path Integral (MPPI) provides derivative-free optimization and robustness for complex robotic systems, but cannot guarantee hard-constraint satisfaction since constraints are handled as soft penalties. This paper proposes Manifold-Constrained MPPI (MC-MPPI), a real-time framework that strictly enforces manifold-based equality constraints by decoupling constraint handling into two stages. At the planning stage, a Variational Autoencoder (VAE) learns a low-dimensional latent representation of the constraint manifold so that MPPI can sample near-feasible trajectories without per-sample projection. At the execution stage, a single-step QP projection corrects residual constraint violations on the selected solution before tracking by an inverse-dynamics controller. Closed-chain dual-arm manipulation experiments show that MC-MPPI reduces equality-constraint violation by an order of magnitude over baseline MPPI variants. Detailed experiment results including videos, additional ablations, and real-world deployment are available at https://rcilab.github.io/mcmppi.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that6_02"
    },
    {
      "id": "ThAT6.3",
      "paperId": "553",
      "title": "Learning Bimanual Surgical Needle Handover Via Context-Based Echo State Networks in Isaac Sim",
      "session": "ThAT6",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528532",
          "name": "Kuşer, Engin",
          "affiliation": "Özyeğin University"
        },
        {
          "id": "488227",
          "name": "Koulaeizadeh, Zahra",
          "affiliation": "Özyeğin University"
        },
        {
          "id": "102609",
          "name": "Bebek, Ozkan",
          "affiliation": "Ozyegin University"
        },
        {
          "id": "104664",
          "name": "Oztop, Erhan",
          "affiliation": "Osaka University / Ozyegin University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Human-Robot Interaction"
      ],
      "abstract": "Bimanual object handover is a fundamental capability for collaborative robotic manipulation, particularly in precision-demanding surgical subtasks. This paper investigates the application of Context-Based Echo State Networks (CESNs) as a computationally efficient Learning from Demonstration (LfD) mechanism for autonomous bimanual needle handover. We develop a dual-arm simulation environment in NVIDIA Isaac Sim featuring two Franka Panda manipulators equipped with patient-side manipulator (PSM) tools. Demonstration trajectories are generated programmatically utilizing the cuMotion planner across four varying spatial needle initializations. Addressing high-dimensional control, the CESN architecture receives external task contexts and robot joint feedback to directly predict continuous 11-degree-of-freedom (DoF) joint-position commands for closed-loop execution. We evaluate the model's performance through offline joint trajectory reconstruction and online simulation rollouts. The results indicate that CESNs can accurately reproduce context-dependent bimanual trajectories with low computational overhead, achieving millimeter-level precision and offering a lightweight alternative to high-capacity deep learning models for encoding structured manipulation subtasks.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that6_03"
    },
    {
      "id": "ThAT6.4",
      "paperId": "610",
      "title": "World Model-Based Decentralized Routing with Joint ISAC-Vision Architecture for Robotic Mobile Fulfillment Systems",
      "session": "ThAT6",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528781",
          "name": "Santoso, Lucky",
          "affiliation": "Department of Informatics, Sepuluh Nopember Institute of Technology"
        },
        {
          "id": "528782",
          "name": "Afiat, Muhammad Ivan Ardianadi",
          "affiliation": "Sepuluh Nopember Institute of Technology"
        },
        {
          "id": "528773",
          "name": "Glueck, Ethan",
          "affiliation": "TUM School of Engineering and Design, Technical University of Munich"
        },
        {
          "id": "528772",
          "name": "Parinduri, Mohammad Fadhil Rasyidin",
          "affiliation": "Department of Industrial Management, National Taiwan University of Science and Technology"
        },
        {
          "id": "528780",
          "name": "Chou, Shuo-Yan",
          "affiliation": "Department of Industrial Management, National Taiwan University of Science and Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "Routing in a Robotic Mobile Fulfillment System (RMFS) is normally computed by one central planner. A perrobot world model could remove that dependency; this paper evaluates one learning robot among planner-driven peers. The model’s weakest channel is the position of other robots: on a four-camera 360◦ model the predicted neighbour position is 6.2 m off after 2.0 s in a 16 m wide warehouse, and storage pods hide 47.9% of nearby robots from the cameras. This paper adds an Integrated Sensing and Communication (ISAC) channel: each neighbour slot gains five noisy, range-gated sensing channels and two communicated destination channels with packet loss. Two world models are trained on one dataset, encoder and latent set, differing only in those seven channels, and scored by the rank correlation ρ between dream and simulator rankings of 20 candidate action sequences. At 5 robots the effect is null (ρ 0.723 vs 0.681, 95% confidence interval (CI) on the difference [−0.023, +0.106], n=16). At 16 robots the ISAC arm reaches ρ=0.602 against 0.449 (∆=+0.152, CI [+0.028, +0.277], permutation p=0.025, n=10), a pattern consistent with congestion making neighbour information decision-relevant. A controller trained in the camera-only dream runs in RAWSim-O with throughput inside the range of six centralized planners but follows the A* direction on every hop; neither dream reaches the ρ ≥ 0.90 gate needed to depart from A*.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that6_04"
    },
    {
      "id": "ThAT6.5",
      "paperId": "243",
      "title": "Asymmetric Information Sensitivity in Surveillance Evasion: Comparing Positional and Temporal Uncertainty for Counter UAS Defense",
      "session": "ThAT6",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "395511",
          "name": "Kim, Jaehyeok",
          "affiliation": "Purdue University - West Lafayette"
        },
        {
          "id": "463849",
          "name": "Sommer-Kohrt, Kylie",
          "affiliation": "Purdue University"
        },
        {
          "id": "358669",
          "name": "Lin, Li-Yu",
          "affiliation": "National Cheng Kung University"
        },
        {
          "id": "145535",
          "name": "Goppert, James",
          "affiliation": "Purdue University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Counter Unmanned Aerial Systems (CUAS) surveillance-evasion studies commonly assume an adversarial UAS with perfect knowledge of the defender's sensor network, an assumption unlikely to hold after imperfect reconnaissance. This paper investigates how uncertainty in sensor position, pan speed, and initial scan phase affects attacker evasion performance and which information components the defender should prioritize denying or degrading. We extend a bilevel surveillance-evasion framework by separating the attacker's believed defender state from the true state, allowing the attacker to optimize against a perturbed belief while its trajectory is evaluated against the true sensor configuration. A Monte Carlo study over 100 randomized maps, five uncertainty levels, and five trials per map compares the three information components under matched normalized degradation. Positional and pan-speed uncertainty produce comparable increases in true detection cost, with no statistically significant difference between them, while both have significantly larger effects than scan-phase uncertainty. These results suggest that defender information-denial efforts should prioritize the attacker's estimates of sensor position and pan speed.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that6_05"
    },
    {
      "id": "ThAT6.6",
      "paperId": "331",
      "title": "Robust Localization System for Crawler UGVs in Grit-Blasting Environments Using Heterogeneous Sensor Fusion and Auxiliary Mechanical Odometry",
      "session": "ThAT6",
      "date": "2026-10-29",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525797",
          "name": "Choi, Kyungwon",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "523894",
          "name": "Yun, YoungJun",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "456991",
          "name": "Bang, Hyuntae",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "525939",
          "name": "Kim, Jae Hoon",
          "affiliation": "Chungnam National University"
        },
        {
          "id": "293856",
          "name": "Youn, Wonkeun",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robot Mechanism and Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "Unmanned Surface Vessels (USVs) require trajectory generation that keeps a safe distance from surrounding traffic while remaining robust and efficient, yet conventional model-based planners generalize poorly and single-paradigm learning methods suffer from covariate shift or lowsample efficiency. This paper proposes iTransformer-GRPO, a two-stage learning framework for USV trajectory generation that combines imitation learning with deep reinforcement learning. An iTransformer backbone captures the long-term temporal dependencies of multivariate navigational states and outputs a three-dimensional action consisting of one immediate waypoint displacement and a normalized curvature, so that the learning signal is aligned with the curvature-based steering used at deployment. Stage 1 distills demonstration trajectories into the policy by behavioral cloning, and Stage 2 refines it in closed loop with value-function-free Group Relative Policy Optimization (GRPO), in which the policy is re-applied to the state its own previous action produced and a group is a set of such trajectories sampled from one navigational state, so that the advantage follows from group standardization alone. The safety term of the reward is built on a Fujii-type ship-domain geometry, which keeps the safety requirement well defined for an arbitrary number of targets, while the ncounter classification of Rules 13–15 and 17 of the International Regulations for Preventing Collisions at Sea (COLREGs) is used to label encounter types. The scope of this paper is the formulation and design of the framework; a quantitative closed-loop evaluation of the trained policies is left to a dedicated study.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that6_06"
    },
    {
      "id": "ThAT7.1",
      "paperId": "31",
      "title": "A Fair Comparative Study of CNN and Vision Transformer Backbones with MixUp and Label Smoothing for Plant Disease Classification",
      "session": "ThAT7",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523045",
          "name": "Phanomwattanasak, Jakkrapat",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "522978",
          "name": "Thaneesan, Wachirawit",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "406652",
          "name": "Anuntachai, Anuntapat",
          "affiliation": "KMITL"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Multimedia Systems",
        "Robot Vision"
      ],
      "abstract": "Plant diseases threaten agricultural productivity and food security, especially in developing regions with limited access to plant pathology expertise. Deep learning–based disease detection offers a scalable solution for precision agriculture and agricultural robots, enabling real-time monitoring while reducing reliance on human labor. This study benchmarks four backbones—ResNet-50, EfficientNet-B0, ViT-Base/16 (AugReg), and ReXNet-150—using a controlled two-stage transfer learning protocol with adaptive augmentation, including the proposed Random Shadow technique, and weighted random sampling for class imbalance. Two training regimes were evaluated: (A) standard cross-entropy and (B) MixUp/CutMix with label smoothing (ε=0.1). Experiments used a 65-class dataset combining twelve public collections (115,059 images across 20 crop species), with results reported as mean ± standard deviation over three seeds and paired significance testing. MixUp/CutMix + label smoothing did not improve ReXNet-150 (95.01 ± 0.15% vs. 95.37 ± 0.16% Top-1; Δ = −0.36 ± 0.30, p = 0.175). Ablation analysis identified CutMix as detrimental; removing it significantly improved balanced accuracy (95.36 ± 0.21% vs. 94.78 ± 0.13%; Δ = +0.58 ± 0.08, Holm-adjusted p = 0.018). The findings support practical deployment in mobile crop monitoring and robotic disease scouting while highlighting the need for field-image validation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that7_01"
    },
    {
      "id": "ThAT7.2",
      "paperId": "77",
      "title": "Voice-To-Text Hazard Reporting and Missing Objects Identification Enhanced by Vision-Language Models",
      "session": "ThAT7",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "210929",
          "name": "Nicodeme, Claire",
          "affiliation": "Alstom"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Multimedia Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Industrial assembly operations require continuous traceability through structured reporting. However, manual data entry remains challenging in practice, as operators work with protective equipment, both hands engaged, and under strict safety and productivity constraints. In such conditions, interacting with keyboards or touchscreens is inconvenient, leading to delayed, incomplete, or inaccurate reporting. Voice input provides a natural alternative, but spoken descriptions alone are often noisy, ambiguous, and insufficient for reliable form completion. This paper proposes a multimodal approach for voice-based hazard reporting and missing-object identification, formulated as a semantic form-filling problem. The pipeline combines speech enhancement and automatic speech recognition using Whisper with context-aware semantic interpretation and visual reasoning based on a unified Vision-Language Model (Qwen3.6-27B). The model integrates transcription, assembly context, and optional visual input to generate structured, schema-compliant reports and assess component presence. It provides pre-filled forms subject to final human validation. Under simulated industrial conditions, the proposed pipeline achieved a 84.5% F1-score for semantic extraction and 83.4% accuracy for missing object detection. The results demonstrate the feasibility of multimodal AI assistance for reducing operator input effort while maintaining safety, reliability and traceability in industrial workflows.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that7_02"
    },
    {
      "id": "ThAT7.3",
      "paperId": "498",
      "title": "A Verification Framework for Physical AI Systems Based on LLM-Based Environment Recognition Using AR Images",
      "session": "ThAT7",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527718",
          "name": "Takazumi, Seiya",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "320479",
          "name": "Koga, Masanobu",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This study proposes an AR-AI verification framework that enables physical AI systems to be verified in an AR environment. In the proposed framework, an LLM recognizes the positions and poses of target objects and a robot from AR images. The use of AR technology enables operation verification in a real environment without using an actual robot. In this study, a coordinate estimation method that draws grid lines on AR images to assist the spatial reasoning of the LLM is proposed. The effects of the presence or absence of grid lines, grid-line colors, capture conditions, target objects, and capture environments on the coordinate estimation accuracy of the LLM were evaluated. The experimental results showed that the relative error in straight-line distance was reduced from 56.7% to 8.3% by displaying grid lines. In addition, the difference in the relative error of straight-line distance due to the grid-line color was small. On the other hand, under capture conditions in which the grid lines appeared slanted, the relative error increased to a maximum of 92.8%. Furthermore, even for different target objects and capture environments, a tendency was observed for the relative error of straight-line distance to be smaller when grid lines were displayed.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that7_03"
    },
    {
      "id": "ThAT7.4",
      "paperId": "568",
      "title": "Spatial and Semantic Reasoning for LLM-Driven Robot Navigation Via MCP",
      "session": "ThAT7",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "388500",
          "name": "Lee, Jungsoo",
          "affiliation": "Hanyang University"
        },
        {
          "id": "518013",
          "name": "Park, Jaegyun",
          "affiliation": "Hanyang University"
        },
        {
          "id": "127992",
          "name": "Kim, Wansoo",
          "affiliation": "Hanyang University ERICA"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "Large language models (LLMs) are increasingly used as natural-language interfaces for robotic systems, yet their integration with Robot Operating System (ROS)-based navigation remains limited by two gaps. First, navigation data such as occupancy grids are represented as raw geometric messages that are difficult for LLMs to use directly as spatial or semantic context. Second, adding LLM-driven capabilities often requires custom wrappers or robot-specific interfaces, limiting reuse across systems. To address these challenges, we propose a non-invasive framework that connects LLM reasoning with ROS-based navigation through a navigation-oriented representation layer, exposed through the Model Context Protocol (MCP) as standardized, reusable tools so that any MCP-compatible LLM can access them without robot-specific wrappers. The visual map modules transform occupancy grids into metric, pose-aware images for goal reasoning, while the semantic annotation modules record waypoint-level observations with robot poses. We evaluate the framework on three tasks: autonomous mapping, spatial reasoning-based navigation, and semantic reasoning-based navigation. The results show that the evaluated LLM backends use these representations to achieve over 97% map coverage and select spatial or semantic navigation targets from natural-language instructions in a simulated indoor environment. This demonstrates representation-mediated LLM navigation without modifying the existing ROS navigation stack.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that7_04"
    },
    {
      "id": "ThAT7.5",
      "paperId": "670",
      "title": "Generalization Evaluation of Reinforcement Learning-Based Flipper Control for Rescue Robots",
      "session": "ThAT7",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "532211",
          "name": "Mitsuda, Shu",
          "affiliation": "Meisei University"
        },
        {
          "id": "189299",
          "name": "Yamazaki, Yoshiaki",
          "affiliation": "Meisei University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Rescue robots equipped with multiple joints and sensors impose a significant operational burden on human operators, particularly in rough terrain. This study proposes a reinforcement learning-based flipper control method for a tracked rescue robot using the Proximal Policy Optimization (PPO) algorithm. The controller was trained in Isaac Sim and Isaac Lab using only a 45° staircase environment. A reward function was designed to encourage upward movement while suppressing abrupt flipper motions and excessive vertical velocity, enabling stable and smooth locomotion. To evaluate the generalization capability of the learned policy, stair-climbing experiments were conducted on staircases with inclination angles of 15°, 30°, 45°, and 60°, including conditions not used during training. Experimental results showed success rates of 90%, 100%, 100%, and 90% for reaching a height of 1.0 m, and 0%, 95%, 95%, and 85% for climbing 2.0 m, respectively. These results demonstrate that the proposed method successfully learned an effective flipper control policy and showed promising generalization capability to unseen staircase inclinations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that7_05"
    },
    {
      "id": "ThAT7.6",
      "paperId": "365",
      "title": "Controllable Diffusion-Based Human Gait Generation and Ground Reaction Force Estimation",
      "session": "ThAT7",
      "date": "2026-10-29",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527888",
          "name": "Yousefi, Mohammad",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "376782",
          "name": "Lee, Gunhee",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "100740",
          "name": "Kong, Kyoungchul",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Rehabilitation Robot",
        "Exoskeleton Robot"
      ],
      "abstract": "Generating physically plausible human gait with explicit control over biomechanical parameters is motivated by applications such as clinical gait analysis, rehabilitation, wearable robot control, and biomechanical simulation. Existing human motion generation models are typically conditioned on text descriptions or action labels, which provide limited control over quantitative gait variables such as walking speed and cadence. They also commonly generate only kinematics, without ground reaction forces (GRFs) needed for biomechanical analysis. In this work, we propose PhyGait, a diffusion-based framework that generates full-body human gait motion and six-channel GRFs conditioned on target speed and cadence. The framework uses a transformer-based denoising network with continuous gait conditioning, adaptive layer normalization, joint motion-GRF generation, and gait-specific physical consistency losses. Trained on 8,953 laboratory motion-capture gait clips collected from two treadmill datasets, PhyGait was evaluated across 13,800 generated samples spanning 115 speed-cadence conditions over speeds of 0.75-1.7 m/s and cadences of 1.5-2.1 steps/s. It accurately followed the target gait conditions, with speed and cadence mean absolute errors of 0.005 m/s and 0.049 steps/s, respectively, while generating realistic motions, stable foot-ground contacts, and biomechanically plausible GRF profiles. These results demonstrate the potential of diffusion models for generating controllable and biomechanically plausible synthetic gait data.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that7_06"
    },
    {
      "id": "ThAT8.1",
      "paperId": "266",
      "title": "Posterior-Existence-Guided Selective Temporal Accumulation for Sparse LiDAR-Based Drone Tracking (I)",
      "session": "ThAT8",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "511470",
          "name": "Lee, Junbeom",
          "affiliation": "Hanyang University"
        },
        {
          "id": "461997",
          "name": "Lee, Jinyoung",
          "affiliation": "Hanyang University"
        },
        {
          "id": "376459",
          "name": "Go, Younjae",
          "affiliation": "Hanyang University"
        },
        {
          "id": "314536",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Navigation, Guidance and Control",
        "Robot Vision"
      ],
      "abstract": "This paper proposes a posterior existence-guided selective temporal accumulation framework for sparse LiDAR-based drone tracking. Conventional LiDAR clustering-based and Deep Learning (DL)-based tracking methods remain vulnerable to track loss in long-range sparse-observation environments. To address this problem, the proposed method transforms raw LiDAR points into a pseudo-likelihood map to represent weak target evidence. A distance-dependent empty-observation likelihood is introduced to update the Bernoulli posterior even when no return is observed. In addition, posterior-guided selective temporal accumulation is used to accumulate only high-confidence past observations. Experimental results demonstrate that the proposed method improves recall, reduces tracking position error, and decreases track loss compared with conventional clustering-based and DL-based tracking methods. These results show that the proposed framework provides a robust tracking solution under sparse and intermittent LiDAR observations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that8_01"
    },
    {
      "id": "ThAT8.2",
      "paperId": "310",
      "title": "Language-Embedded Gaussian Map Assisting Goal-Aware Robot Navigation in Indoor Environment (I)",
      "session": "ThAT8",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527184",
          "name": "Kim, Seonwoo",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "437595",
          "name": "Phan, Thanh-Danh",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Navigation, Guidance and Control",
        "Process Control Systems"
      ],
      "abstract": "Indoor service robots are increasingly expected to find and reach objects described by their users in natural language. Existing map based navigation methods often rely on compact semantic maps that retain only a fixed set of categories and discard the texture needed to tell similar objects apart, while recent Gaussian Splatting navigation can ground an image goal but cannot accept open vocabulary language. We present a framework that builds a language embedded Gaussian map of an indoor scene, in which each object instance is associated with a long text vision language feature so that the scene can be queried by free form text or images. Given a user prompt, the target object is extracted and matched against the map to retrieve candidate instances. Because language goals are ambiguous, we render views of the candidates from the map and use a vision language model to verify which one satisfies the user requirement before the robot navigates to it. Experiments against representative baselines show that our pipeline supports a range of language driven navigation tasks for indoor service robots.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that8_02"
    },
    {
      "id": "ThAT8.3",
      "paperId": "312",
      "title": "Joint Geometry-Feature Clustering and Robust Language Association for Open-Vocabulary Gaussian Splatting (I)",
      "session": "ThAT8",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "437595",
          "name": "Phan, Thanh-Danh",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "104634",
          "name": "Kim, Gon-Woo",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "3D Gaussian Splatting (3DGS) is a powerful scene representation, but extending it to instance-level and open-vocabulary understanding remains difficult. Point-level methods learn low-dimensional instance features on Gaussians and then discretize them, but they rely on multi-level k-means codebooks with predefined cluster counts that cannot adapt to scene complexity, and they attach language features by averaging CLIP embeddings over every view a cluster appears in, letting poorly visible or mis-associated views corrupt the result. We address both steps in post-processing. First, we discretize the features with a single density-based hierarchical clustering pass over a balanced fusion of 3D position and instance features, so a cluster forms only where points are spatially close and feature-similar and the instance count emerges from the scene rather than a fixed k. Second, we add a robust language association step that rejects unreliable views and averages only those agreeing with the cluster consensus. Experiments on indoor scenes show consistent improvements in semantic segmentation and instance clustering over the Gaussian-based baseline, and ablations confirm each component's contribution.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that8_03"
    },
    {
      "id": "ThAT8.4",
      "paperId": "316",
      "title": "Data-Driven and Nonlinear MPC with Switching Criterion for UAV Trajectory Tracking (I)",
      "session": "ThAT8",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527345",
          "name": "Park, JaeDong",
          "affiliation": "Hanyang University"
        },
        {
          "id": "446376",
          "name": "Oh, Yuna",
          "affiliation": "Hanyang University"
        },
        {
          "id": "314536",
          "name": "Moon, Jun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Performance optimization for quadrotor control requires different control efforts during transient and steady-state conditions. Satisfying these requirements is difficult with a single Model Predictive Control (MPC). This paper proposes a switching-based hybrid control system for quadrotor position control using Koopman MPC (KMPC) and Nonlinear MPC (NMPC). The proposed method includes a selector that evaluates the switching cost of each controller and chooses the input from the controller with the lower cost. By applying this selector, the method exploits advantages of each MPC and achieves effective position control. The proposed method was verified on Quanser 3 degrees of freedom (DOF) Hover platform and in MATLAB/Simulink environment. We also conducted simulations to evaluate the proposed method, and analyzed the characteristics of each controller in terms of tracking performance and input consumption. Experimental result shows that NMPC was selected more frequently, while KMPC tended to be selected during transient intervals. As a result, the proposed method can select the appropriate controller depending on the flight conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that8_04"
    },
    {
      "id": "ThAT8.5",
      "paperId": "375",
      "title": "Slip-Aware Path Tracking of Tracked Mobile Robots Using DOB-EKF-Based Disturbance Estimation (I)",
      "session": "ThAT8",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "318786",
          "name": "Yang, Jeongmo",
          "affiliation": "The School of Mechanical Engineering, Hanyang University"
        },
        {
          "id": "527969",
          "name": "Kim, Seungjun",
          "affiliation": "Hanyang University"
        },
        {
          "id": "461764",
          "name": "Kwon, Yongho",
          "affiliation": "Hanyang University"
        },
        {
          "id": "318787",
          "name": "Kim, Hanbom",
          "affiliation": "Hanyang Univercity"
        },
        {
          "id": "527971",
          "name": "Kim, Jongmin",
          "affiliation": "Hanyang University"
        },
        {
          "id": "140339",
          "name": "Seo, TaeWon",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Robot Mechanism and Control"
      ],
      "abstract": "Tracked mobile robots (TMRs) are advantageous for rough-terrain navigation because they provide high traction and stable mobility. However, skid-steering locomotion induces model uncertainty through track--terrain interaction, thereby degrading path-tracking accuracy. This paper proposes a slip-aware path-tracking framework for TMRs based on a disturbance-augmented kinematic model and a DOB-EKF-based estimator. The robot motion is modeled using persistent slip parameters and transient additive disturbances. The slip parameters represent terrain-induced response degradation, whereas the additive disturbances represent short-duration effects such as impulsive impacts. To estimate these quantities, a dual-layer estimator is designed. A disturbance observer (DOB) estimates fast additive disturbances, while an extended Kalman filter (EKF) estimates persistent slip parameters. A persistence detector determines whether the model residual should be retained as a transient disturbance or reflected in the EKF-based slip parameter estimation. The estimated parameters are then used to compensate the linear and angular velocity commands in the path-tracking controller. The proposed method is evaluated through simulations including terrain transitions and impulsive disturbances.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that8_05"
    },
    {
      "id": "ThAT9.1",
      "paperId": "307",
      "title": "Design and Field Validation of an AI-Assisted Autonomous Navigation System for a Low-Speed Electric Vehicle",
      "session": "ThAT9",
      "date": "2026-10-29",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "121610",
          "name": "Panomruttanarug, Benjamas",
          "affiliation": "King Mongkut's University of Technology Thonburi"
        },
        {
          "id": "526973",
          "name": "Chamwong, Peeratchai",
          "affiliation": "KMUTT"
        },
        {
          "id": "526974",
          "name": "Chomchuenphrueksa, Phuriphat",
          "affiliation": "KMUTT"
        },
        {
          "id": "526975",
          "name": "Wichaikham, Phichayapha",
          "affiliation": "KMUTT"
        },
        {
          "id": "526977",
          "name": "Chaiyapoom, Poomtham",
          "affiliation": "KMUTT"
        },
        {
          "id": "534439",
          "name": "Jirasereeamornkul, Kamon",
          "affiliation": "KMUTT"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents the design and field validation of an artificial intelligence (AI)-assisted autonomous navigation system for a low-speed electric golf cart. The proposed system integrates a voice AI agent for destination and stop-command input, LiDAR-Inertial Odometry via Smoothing and Mapping (LIO-SAM)-based 3D mapping, OpenMP-accelerated Normal Distributions Transform (NDT_OMP) scan-matching localization, and adaptive Pure Pursuit path-following control. A light detection and ranging (LiDAR)-inertial map is generated offline from a manual teaching run, while online scan-to-map matching provides the vehicle pose in the map frame for path tracking. Field experiments were conducted on a campus route using an instrumented electric golf cart. The voice AI agent achieved intent-recognition accuracies of 98%, 78%, and 90% under indoor, outdoor, and moving-vehicle conditions, respectively. The localization module achieved a mean planar error of 0.514m and a root-mean-square error (RMSE) of 0.614m relative to a real-time kinematic Global Navigation Satellite System (RTK-GNSS) reference trajectory. In three adaptive Pure Pursuit runs, the controller achieved an overall mean absolute cross-track error (CTE) of 0.207m and a root-mean-square CTE of 0.261m over 1626.6m of autonomous path-following operation. These results demonstrate that the integrated pipeline can support practical low-speed autonomous navigation in a campus environment while keeping high-level AI interaction separate from deterministic localization and control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that9_01"
    },
    {
      "id": "ThAT9.2",
      "paperId": "361",
      "title": "Towards Safe Deployment of Learning Based Controllers in Autonomous Rail Vehicles: A Runtime Assurance Reference Architecture",
      "session": "ThAT9",
      "date": "2026-10-29",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "386374",
          "name": "Reiling, Fabian",
          "affiliation": "Fraunhofer Institute for Mechatronic Systems Design"
        },
        {
          "id": "386375",
          "name": "Gröger, Stefan",
          "affiliation": "Fraunhofer Institute for Mechatronic Systems Design"
        },
        {
          "id": "386345",
          "name": "Bause, Maximilian",
          "affiliation": "Fraunhofer Institute for Mechatronic Systems Design"
        },
        {
          "id": "386361",
          "name": "Henke, Christian",
          "affiliation": "Fraunhofer Institute for Mechatronic Systems Design"
        },
        {
          "id": "168329",
          "name": "Traechtler, Ansgar",
          "affiliation": "Heinz Nixdorf Institute, University of Paderborn"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Learning-based controllers offer data-driven adaptivity for autonomous systems operating under uncertain and time-variant conditions, but their deployment in safety-critical control applications lacks formal guarantees for stability and robustness. Training data cannot cover all operating conditions, and learned models may degrade silently through concept drift. This paper proposes a runtime assurance reference architecture that places a safety shell around the learning-based controller. The shell combines a novelty detector on the input space of the learning-based controller, a drift detector on the input-output behavior of the system, a fallback controller restricted to analyzable model classes, a supervisor coordinating mode transitions, and a cloud-based learning module that keeps batch model updates out of the safety-critical control path. Because the switching evidence is statistical, the shell reduces risk instead of proving safety, and it concentrates the need for formal evidence in the fallback path and the surrounding safety case. A sensitivity study using a multibody model of an autonomous rail vehicle shows that none of the three representative PI tunings is simultaneously safe and efficient across 27 operating points, motivating adaptive control combined with runtime safety assurance. The shell is specified at the level of functional roles and interfaces and has not yet been instantiated or validated in closed loop.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that9_02"
    },
    {
      "id": "ThAT9.3",
      "paperId": "446",
      "title": "Lane-Change Progression-Aware Residual Learning for Driving Style Adaptation in Autonomous Vehicles",
      "session": "ThAT9",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527431",
          "name": "Seo, Minjae",
          "affiliation": "Hanyang University Republic of Korea, Seoul"
        },
        {
          "id": "349464",
          "name": "Kim, Guntae",
          "affiliation": "Hanyang University"
        },
        {
          "id": "349314",
          "name": "Kang, Chang Mook",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Driving style adaptation has attracted increasing attention as a means of improving user acceptance and comfort in autonomous vehicles. This paper proposes a progression-aware residual learning framework for driving style adaptation while preserving an existing baseline path-tracking controller. The proposed method learns the residual steering command between a baseline controller and a target driving style controller using vehicle states, a normalized lane-change progression variable τ, and baseline steering commands. To generate diverse driving styles without requiring real driver data, lane-change style profiles with different lane-change durations and steering characteristics are designed using model predictive control (MPC). For each driving style, an individual residual learning model is trained and integrated with the baseline controller in a closed-loop CarSim–Simulink environment. The variable τ encodes maneuver-phase information, enabling the network to distinguish different stages of a lane-change event and reproduce style-dependent steering behaviors throughout the maneuver. Experimental results demonstrate that the proposed framework successfully reproduces the lane-change characteristics of target driving styles while preserving the stability and structure of the baseline controller. Furthermore, the trained models show satisfactory generalization to unseen double lane-change scenarios without additional retraining, indicating that the proposed framework captures style-dependent steering patterns rather than memorizing a specific lane-change trajectory.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that9_03"
    },
    {
      "id": "ThAT9.4",
      "paperId": "20",
      "title": "Modal Family Classification for Vehicle-Trailer-Driver Lateral Dynamics",
      "session": "ThAT9",
      "date": "2026-10-29",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "458707",
          "name": "Oh, Jiyeol",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "523171",
          "name": "Lee, Haewoo",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "225119",
          "name": "Choi, Seibum",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Modal analysis helps engineers understand complex dynamical systems by representing their responses as combinations of simpler modal components. Vehicle-trailer (VT) lateral dynamics exhibit strongly coupled lateral motion between the towing vehicle and trailer, while retaining modal characteristics associated with each subsystem. Therefore, a modal viewpoint can provide useful insight for VT system evaluation, design optimization, stability assessment, and controller design. However, VT systems have rarely been investigated from a systematic modal-analysis perspective. This paper proposes an anchor-based modal family classification framework for the lateral dynamics of VT systems and vehicle-trailer-driver (VTD) systems, where the VTD system represents a driver-in-the-loop closed-loop extension of the VT system. For the VT system, vehicle- and trailer-origin modes are defined using a near-zero-trailer-mass anchor and continued to the nominal trailer mass. For the VTD system, vehicle-, trailer-, and driver-origin modes are classified using a near-zero-driver-feedback anchor and continued to the target driver feedback condition. A continuation tracking algorithm combining pole proximity and the modal assurance criterion is proposed to maintain modal-family labels across operating speeds. Simulation results show the speed-dependent evolution of VT and VTD modal families, demonstrate the consistency of the proposed modal classification method, and support the physical interpretation of the classified modes through modal contribution analysis.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that9_04"
    },
    {
      "id": "ThAT9.5",
      "paperId": "367",
      "title": "Online Friction-Adaptive Reinforcement Learning for Autonomous Racing",
      "session": "ThAT9",
      "date": "2026-10-29",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "494562",
          "name": "Kim, Jungbin",
          "affiliation": "UNIST (Ulsan National Institute of Science and Technology)"
        },
        {
          "id": "314740",
          "name": "Nam, Youngim",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "466270",
          "name": "Yang, Hyeongjoon",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "305540",
          "name": "Kwon, Cheolhyeon",
          "affiliation": "Ulsan National Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper proposes an online friction-adaptive reinforcement learning (RL) framework for autonomous racing under spatially varying tire-road friction. Such spatial friction variation hinders reliable model-based control, whereas RL can learn racing policies through direct interaction with the racing environment. However, conventional RL policies neither explicitly account for the current friction condition nor inherently prevent actions from exceeding the friction limit. To address these challenges, we develop an action-mapping RL framework that uses online estimated friction information both to condition the policy and to constrain action execution. Specifically, a nonlinear least-squares estimator identifies the tire-road friction coefficient from recent state-action transitions. The estimated friction is then included in the input of the policy trained by proximal policy optimization (PPO). The estimated friction is further used to define , whereby action mapping (AM) mechanism maps each policy output to a physically feasible action. Simulation results under spatially varying friction demonstrate that the proposed framework reduces mean lap time by up to 31.42% of baseline, confirming improved friction-adaptive racing performance.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that9_05"
    },
    {
      "id": "ThAT9.6",
      "paperId": "583",
      "title": "Multi-Objective Optimization of Control Parameters for Safety and Fuel Efficiency in Vehicle Platoons under Random Packet Losses",
      "session": "ThAT9",
      "date": "2026-10-29",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527560",
          "name": "Chen, Yuhao",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "329636",
          "name": "Cetinkaya, Ahmet",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "528684",
          "name": "Arcaini, Paolo",
          "affiliation": "National Institute of Informatics"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Information and Networking"
      ],
      "abstract": "In vehicle platooning, wireless information exchange allows vehicles to coordinate and follow each other closely, reducing the aerodynamic drag and increasing fuel savings. However, wireless transmissions are subject to failures due to packet losses and when such failures happen at the time of a sudden brake, they may cause safety issues. The safety performance under packet losses can be improved by choosing the vehicle control parameters effectively. In particular, the minimum inter-vehicle distance during a sudden brake can be made large enough to avoid crashes. On the other hand, such control parameters typically increase aerodynamic drag on vehicles and in turn reduce fuel savings. In this paper, we formalize the control parameter search as constrained multi-objective optimization problems. Under different wireless channel settings, we use NSGA-II with repeated simulation runs to search for control parameters that perform well in terms of both safety and fuel efficiency. For a vehicle platoon that contains 10 vehicles, we demonstrate the approximate Pareto front with solutions showing trade-off relationship between safety and fuel efficiency.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#that9_06"
    },
    {
      "id": "ThBT2.1",
      "paperId": "110",
      "title": "Design of Robotic Device for Needle Placement in Percutaneous Epidural Balloon Neuroplasty (I)",
      "session": "ThBT2",
      "date": "2026-10-29",
      "start": "15:40",
      "end": "15:55",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "273893",
          "name": "Yang, Bomi",
          "affiliation": "Asan Medical Center"
        },
        {
          "id": "179726",
          "name": "Hyun, Jae Ho",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "408722",
          "name": "Cho, Yeongjun",
          "affiliation": "Asan Institute for Life Sciences, Asan Medical Center"
        },
        {
          "id": "392601",
          "name": "Kwon, Hyun-Jung",
          "affiliation": "Asan Medical Center"
        },
        {
          "id": "139519",
          "name": "Choi, Jaesoon",
          "affiliation": "University of Ulsan College of Medicine / Asan Medical Center"
        },
        {
          "id": "140089",
          "name": "Moon, Youngjin",
          "affiliation": "Asan Medical Center, University of Ulsan College of Medicine"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Biomedical Instruments and Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a needle insertion robotic end-effector for percutaneous epidural neuroplasty. The system employs a parallelogram-based remote center of motion (RCM) mechanism to maintain a fixed skin entry point while enabling two degrees of freedom (DOF) for needle orientation. Needle insertion and axial rotation are independently actuated via a syringe-based hydraulic transmission, providing a total of 4-DOF. A prototype was developed to validate the kinematic design. Experimental results confirmed independent 4-DOF operation without mutual interference and demonstrated angular positioning accuracy within ±1° over a ±30° range. However, limitations of the hydraulic transmission were identified, including susceptibility to nozzle clogging, transmission variability, and maintenance complexity. To address these issues while preserving the RCM kinematics, we propose a belt–pulley-based transmission mechanism. The redesigned system aims to improve mechanical stiffness, reduce response delays, and enhance repeatability. Future work will focus on quantitative performance comparison and precision control validation for clinical applicability.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt2_01"
    },
    {
      "id": "ThBT2.2",
      "paperId": "194",
      "title": "Handheld SMART Microsurgical Systems with Optical Coherence Tomography Sensing for Tremor-Compensated Vitreoretinal Surgery (I)",
      "session": "ThBT2",
      "date": "2026-10-29",
      "start": "15:55",
      "end": "16:10",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "199203",
          "name": "Song, Cheol",
          "affiliation": "DGIST"
        },
        {
          "id": "337159",
          "name": "Lee, Myung Ho",
          "affiliation": "DGIST"
        },
        {
          "id": "392625",
          "name": "Cho, Gichan",
          "affiliation": "DGIST"
        },
        {
          "id": "214102",
          "name": "Im, Jintaek",
          "affiliation": "Massachusetts General Hospital"
        },
        {
          "id": "415475",
          "name": "Na, Jongyeol",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Robotic Applications"
      ],
      "abstract": "This study presents a handheld SMART microsurgical system designed to improve precision and safety in vitreoretinal surgery. Ophthalmic microsurgery requires micrometer-scale manipulation of delicate retinal tissues, but physiological hand tremor and unintended instrument drift can limit surgical accuracy and increase the risk of tissue damage. To address these challenges, the proposed system integrates a common-path swept-source optical coherence tomography distance sensor with a compact PZT actuator. The OCT sensor measures the real-time distance between the surgical tool tip and the target tissue, while the actuator compensates for unwanted motion at the distal end of the instrument. This approach preserves the intuitive operation of handheld surgical tools while providing active tremor cancellation. The study also introduces a bimanual SMART platform that enables one stabilized tool to grasp and tension tissue while another performs precise dissection or peeling. Recent developments, including OCT-based predictive stabilization, magnetic sensing, multimodal optical imaging, and multi-degree-of-freedom control, further demonstrate the potential of SMART systems as clinically practical sensor-fusion platforms for future robot-assisted microsurgery.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt2_02"
    },
    {
      "id": "ThBT2.3",
      "paperId": "384",
      "title": "Learning Vertebra-Wise Local 6-DoF Poses for Lumbar Spine 2D/3D Registration (I)",
      "session": "ThBT2",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "16:25",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "409234",
          "name": "Sharmee, Sharmin Sultana",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "150612",
          "name": "Hong, Ayoung",
          "affiliation": "Chonnam National University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Fluoroscopy-guided spinal interventions require accurate alignment between preoperative CT images and intraoperative X-ray images. However, this alignment is challenging because the lumbar spine may not behave as a single rigid structure during patient positioning. Individual vertebrae can undergo local rotation and translation, which may reduce the accuracy of conventional rigid 2D/3D registration methods. This study proposes a learning-based framework for estimating the local six-degree-of-freedom pose of individual lumbar vertebrae from multi-vertebra digitally reconstructed radiographs. Isolated CT volumes of L1-L5 were used to generate synthetic DRR images with known per-vertebra pose variations and a global patient-pose. A ResNet-34-based regression network was trained to predict 30 local pose parameters corresponding to the five lumbar vertebrae. The method was evaluated on 100 test DRR images, representing 500 individual vertebra predictions. The model achieved an overall mean rotation L2 error of 2.5898^circ and a mean translation L2 error of 2.1400 mm. Per-vertebra analysis showed better performance for the middle lumbar levels compared with boundary vertebrae. These results suggest that modeling the lumbar spine as multiple locally moving vertebrae is a promising approach for improving patient-specific 2D/3D spine registration.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt2_03"
    },
    {
      "id": "ThBT2.4",
      "paperId": "503",
      "title": "Development of a CT/MRI Fusion Augmented Reality Navigation System with Robot-Assisted Needle Tracking for Spinal Pain Interventions (I)",
      "session": "ThBT2",
      "date": "2026-10-29",
      "start": "16:25",
      "end": "16:40",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528439",
          "name": "Jang, Taesoo",
          "affiliation": "Asan Medical Center"
        },
        {
          "id": "139519",
          "name": "Choi, Jaesoon",
          "affiliation": "University of Ulsan College of Medicine / Asan Medical Center"
        },
        {
          "id": "140089",
          "name": "Moon, Youngjin",
          "affiliation": "Asan Medical Center, University of Ulsan College of Medicine"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control"
      ],
      "abstract": "Pain treatment typically relies on fluoroscopic imaging or computed tomography (CT), which has disadvantages such as requiring two-dimensional image interpretation, inducing repetitive radiation exposure, and lacking soft tissue visualization. This study implements a 3D reconstruction and multi-mode CT/MRI fusion pipeline and proposes an augmented reality (AR) navigation architecture integrated with a robot-assisted needle guidance function. The developed pipeline fuses CT (anatomical bone structures) and MRI (neuroroots, intervertebral discs, dural sacs) images using deformable registration, segments key structures through a deep learning workflow, and generates a simplified 3D surface model optimized for real-time AR rendering. To address occlusion in crowded treatment areas, a robot needle tracking framework was designed based on robot kinematics and reference point registration attached to the skin. The planned AR interface provides real-time trajectory guidance, distance feedback between the needle tip and the target point, and proximity warning functions to a head-mounted display. Furthermore, a step-by-step validation protocol was developed, including lumbar phantom accuracy, mannequin/cadaver usability, and pilot randomized clinical trials. This detailed summary describes the patient-specific multimodal modeling process and, in particular, details the overall system architecture and preclinical validation pathways. Physical hardware integration and clinical trials remain as future validation steps.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt2_04"
    },
    {
      "id": "ThBT2.5",
      "paperId": "656",
      "title": "Marker-Ring-Based Scale Calibration for Epidural Pain Intervention Robot: Conceptual Design and Preliminary Test (I)",
      "session": "ThBT2",
      "date": "2026-10-29",
      "start": "16:40",
      "end": "16:55",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "490790",
          "name": "Zou, Hantao",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "118341",
          "name": "Ko, Seong Young",
          "affiliation": "Chonnam National University"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "Recently, a double-layer five-bar robot designed for epidural pain intervention has been proposed. Its procedure is typically performed by clinicians under X-ray guidance. In traditional workflows, controlling the robot requires acquiring multiple intraoperative images, which is highly time-consuming and causes significant radiation hazards on medical staff. To mitigate these limitations, we propose the initial phase of an image-guided automatic alignment method. This method processes the captured X-ray images to automatically recognize a metallic marking ring, which serves as a reference to determine the spatial scale ratio between image pixels and physical dimensions (mm/pixel). Tested on real X-ray images from animal test, the proposed image recognition algorithm achieved a success rate of 80% in detecting the marking ring. As a preliminary study prior to the actual automatic alignment, this work successfully validates the feasibility of spatial scale calibration, establishing a critical foundation for subsequent autonomous robot-source alignment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt2_05"
    },
    {
      "id": "ThBT3.1",
      "paperId": "285",
      "title": "Tension-Aware Hysteresis Compensation for Antagonistic Tendon-Sheath Mechanisms with Hybrid Feedback Control (I)",
      "session": "ThBT3",
      "date": "2026-10-29",
      "start": "15:40",
      "end": "15:55",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525738",
          "name": "An, ByeongJun",
          "affiliation": "Pusan National University"
        },
        {
          "id": "526259",
          "name": "Kim, Yong Chan",
          "affiliation": "Pusan National University"
        },
        {
          "id": "145436",
          "name": "Jin, Sangrok",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Tendon-sheath mechanisms are widely used for flexible surgical and endoscopic robots, but friction, elastic deformation, and slack cause hysteresis between motor input and distal motion. This paper presents a preliminary tension-aware hysteresis compensation framework for an antagonistic tendon-sheath mechanism with hybrid feedback control. Unlike a purely offline curve-fitting approach, the proposed framework considers both prediction accuracy and over-tension risk. The pulling-side actuator follows motor-position feedback with a real-time measured-signal-based compensation term, while the releasing-side actuator uses load-cell tension feedback to maintain a reference tension and suppress slack-induced dead-zone behavior. Candidate compensation models are identified using tension, velocity, and acceleration terms, and are evaluated by offline prediction error, high-tension response, and tension sensitivity. A 23 N evaluation point, corresponding to approximately 5% elastic input loss in the present setup, is used as an experimental operating-risk criterion. Preliminary switching experiments show that asymmetric model selection for the two antagonistic motors reduces hysteresis width across multiple paths while keeping the observed peak tension below the 23 N criterion. Future work will further analyze switching transients, holding-section effects, and predictive over-tension mitigation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt3_01"
    },
    {
      "id": "ThBT3.2",
      "paperId": "453",
      "title": "LiDAR Snow Particle Filtering under Snowfall Conditions Using Intensity and Spatiotemporal Features (I)",
      "session": "ThBT3",
      "date": "2026-10-29",
      "start": "15:55",
      "end": "16:10",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528367",
          "name": "Kim, Kahyeon",
          "affiliation": "Changwon National University"
        },
        {
          "id": "528322",
          "name": "Gim, Juhui",
          "affiliation": "Changwon National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Object detection is a key perception task for safe autonomous driving and reliable path planning. LiDAR sensors are widely used in autonomous vehicles due to their accurate range measurements. However, LiDAR-based perception can be degraded by adverse weather conditions. Particularly, snowfall is challenging because snow particles generate noise points and reduce object points in measured signals. This paper proposes a snow particle filtering algorithm that combines LiDAR intensity characteristics and spatiotemporal consistency in sequential frames. First, the proposed method selects snow particle candidates using the low intensity characteristics of snow particles and a LiDAR signal model. Second, the remaining snow candidates are removed using frame-to-frame registration and a neighborhood-based density filter. The registration step uses vehicle kinematics to correct point-wise motion distortion caused by the sequential scanning operation of LiDAR. As a result, the proposed method removes sparse and inconsistent snow particles while preserving object points. The proposed algorithm improves the robustness of LiDAR perception such as pole-like object detection under heavy snowfall conditions with low computation time compared with existing filtering methods, including DROR and LIOR.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt3_02"
    },
    {
      "id": "ThBT3.3",
      "paperId": "603",
      "title": "Nonlinear SEA Preload Control for Knee Assistance under Limited Runtime Sensing (I)",
      "session": "ThBT3",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "16:25",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "426852",
          "name": "Mun, Jongchan",
          "affiliation": "Pusan National University"
        },
        {
          "id": "145436",
          "name": "Jin, Sangrok",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper reports a reinforcement-learning redesign for knee assistance with a nonlinear torsional series elastic actuator (SEA). The goal is to exploit a fxed nonlinear defection-torque curve under limited runtime sensing. The runtime policy receives only gait-phase and motor-side signals; it does not receive the dataset torque target, knee angle, SEA defection, or delivered assist torque. Unlike an earlier absolute position-target formulation, the fnal controller uses PPO to output a normalized, rate-limited motor-equilibrium increment. A no-teacher PPO run on the canonical Fukuchi overground young-adult profle reduces deterministic evaluation RMSE from 6.46 Nm for a PD gain-scheduling baseline to 0.706 Nm over 25 evaluation episodes. The delivered SEA assist torque reaches 0.988 correlation with the hidden target profle, 0.54/1.88 Nm quiet-zone mean/max assist, 0.51% gait-cycle peak timing error, zero unsafe termination, and 8.46% action saturation. The result demonstrates deployable preload-command learning in a simplifed simulation while identifying remaining limits: prescribed knee motion, a single canonical profile, assumed spring parameters, and a high-speed actuator assumption",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt3_03"
    },
    {
      "id": "ThBT3.4",
      "paperId": "620",
      "title": "Recognition of Table Cutlery Using Infrared-Absorbing Table and Received Light Intensity (I)",
      "session": "ThBT3",
      "date": "2026-10-29",
      "start": "16:25",
      "end": "16:40",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "464124",
          "name": "Miura, Ayu",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "108516",
          "name": "Yoshimi, Takashi",
          "affiliation": "Shibaura Institute of Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing",
        "Industrial Applications of Control"
      ],
      "abstract": "In this study we propose a method for recognizing small tableware, such as cutlery, on a table using three-dimensional (3D) point cloud data, aiming to automate tableware collection using robots in the restaurant industry. In the previous study, we proposed cutlery recognition method using a glass table to clarify the differences in height between the surface of the table and the cutlery. However, its versatility for deployment in actual restaurants remained issues. Therefore, we propose a more practical method that utilizes a table with infrared-absorbing material surface and received light intensity. Cutlery made from various materials was placed on simulated table surfaces—constructed from plywood and aluminum plates—that had been covered with light-absorbing sheets or coated with an anti-reflective agent; the cutlery was then recognized. The results confirmed that the light-absorbing surface reduced the received light intensity, creating a distinct contrast between the table surface and the cutlery. While metal cutlery exhibited fluctuations in received light intensity due to specular reflection, the shape data for wooden and plastic cutlery could be extracted clearly and with high uniformity. These findings demonstrate that cutlery placed on a table surfaced with an infrared-absorbing material can be recognized by observing the difference in received light intensity, thereby confirming the effectiveness of the method proposed in this study.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt3_04"
    },
    {
      "id": "ThBT4.1",
      "paperId": "572",
      "title": "Development of a Leader-Follower Type Assist Arm to Support the Daily Life of Electric Wheelchair Users",
      "session": "ThBT4",
      "date": "2026-10-29",
      "start": "15:40",
      "end": "15:55",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528505",
          "name": "Makishima, Yoshiyuki",
          "affiliation": "Osaka Electro-Comunication University"
        },
        {
          "id": "361901",
          "name": "Ogawa, Katsushi",
          "affiliation": "Osaka Electro-Communication University"
        },
        {
          "id": "109107",
          "name": "Jeong, Seonghee",
          "affiliation": "Osaka Electro-Comunication University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control"
      ],
      "abstract": "In this study, we develop an assistive arm module for electric wheelchairs to support daily activities. The proposed arm combines a cam–spring gravity compensation mechanism with a belt–pulley transmission, enabling independent gravity compensation at each joint. This design aims to realize a lightweight manipulator with sufficient payload capability even when using low-power actuators.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt4_01"
    },
    {
      "id": "ThBT4.2",
      "paperId": "574",
      "title": "Prototype Development of Hybrid-Structured Leader-Follower Robotic Arm for Remote Painting of Railway Catenary Pole",
      "session": "ThBT4",
      "date": "2026-10-29",
      "start": "15:55",
      "end": "16:10",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528511",
          "name": "Aoki, Haruki",
          "affiliation": "Osaka Electro-Communication University"
        },
        {
          "id": "361901",
          "name": "Ogawa, Katsushi",
          "affiliation": "Osaka Electro-Communication University"
        },
        {
          "id": "463778",
          "name": "Jozen, Tsuneo",
          "affiliation": "Osaka Electro-Communication University"
        },
        {
          "id": "109107",
          "name": "Jeong, Seonghee",
          "affiliation": "Osaka Electro-Comunication University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control"
      ],
      "abstract": "Anti-corrosion coating of cage-type railway catenary poles is often performed manually by workers climbing the poles, which involves significant risks associated with working at height. In addition, labor shortages and the decline in the number of skilled workers in the coating industry have increased the demand for automation of painting operations. This study focuses on a hybrid robotic arm that combines the high rigidity of a delta mechanism with the large workspace of a serial mechanism while providing sufficient dexterity for painting tasks. In this paper, a hybrid-structured follower arm was designed and fabricated to satisfy the coating workspace required for actual railway catenary poles. The robotic arm dimensions were determined through workspace simulations, and the mechanism was designed with a hollow structure that allows a paint supply tube to pass through the robotic arm. Furthermore, a downsized leader arm was designed and fabricated based on the dimensions of the follower arm, and a leader–follower teleoperation system using simple joint-angle communication was implemented.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt4_02"
    },
    {
      "id": "ThBT4.3",
      "paperId": "523",
      "title": "The Locomotion Evaluation of a Torsionally Actuated Snake-Like Robot Using Deep Reinforcement Learning",
      "session": "ThBT4",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "16:25",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528444",
          "name": "Matsuoka, Takumi",
          "affiliation": "Osaka Metropolitan University"
        },
        {
          "id": "329681",
          "name": "Yamano, Akio",
          "affiliation": "Osaka Metropolitan University"
        },
        {
          "id": "368614",
          "name": "Iwasa, Takashi",
          "affiliation": "Osaka Metropolitan University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Snake-like robots exhibit high mobility on rough terrain; however, they consume significant power and tend to tip over in the roll direction on undulating surfaces. To achieve improved propulsion and posture stabilization, this study investigated a novel snake-like robot equipped with active roll joints. We constructed a hierarchical control system combining a Central Pattern Generator (CPG) with Proximal Policy Optimization (PPO) to adapt to unknown terrains. Through large-scale parallel simulations using the physics engine Genesis, we discovered an insightful phenomenon: naively incorporating active roll joints severely degrades locomotion speed and maneuverability. Analysis of the joint angle trajectories revealed that the rolling motion causes the rigid link edges to dig into the ground, physically locking the pitch joints and preventing the lifting motion necessary for sidewinding. This study highlights that expanding the degrees of freedom in snake-like robots strictly requires morphological co-design, such as cross-sectional shape optimization, to prevent physical interference with the environment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt4_03"
    },
    {
      "id": "ThBT4.4",
      "paperId": "333",
      "title": "Structure Estimation of Micro Multi-Articulated Mechanical Systems Using Time-Series Point Cloud Data",
      "session": "ThBT4",
      "date": "2026-10-29",
      "start": "16:25",
      "end": "16:40",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527541",
          "name": "Nakamura, Souta",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "320479",
          "name": "Koga, Masanobu",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "To streamline the simulation and design of microrobots with multi-articulated structures, constructing accurate kinematic models of complex micro-mechanisms is essential. However, manually defining joint positions and link connections is highly time-consuming.In this study, we propose a method to automatically generate a robot description model (URDF) of micro-articulated objects by extending the AutoURDF framework and estimating the joint structure from time-series point cloud data using unsupervised learning. We adopted a high-precision 3D grasshopper model as a benchmark to facilitate rigorous quantitative evaluation of the proposed method and the acquisition of ground truth data. To resolve challenges in the part segmentation of fine structures, we introduce point cloud preprocessing techniques such as model scale enlargement, local high-density sampling around moving parts, and the application of an expanded initial pose to explicitly separate parts. Furthermore, we directly extract key kinematic parameters, such as joint positions, rotation axes, and motion limits, from displacements across time-series frames. By synthesizing the sub-models extracted with high precision through these processes, we successfully generated a fully functional 12-joint model, demonstrating the effectiveness of the proposed method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt4_04"
    },
    {
      "id": "ThBT4.5",
      "paperId": "39",
      "title": "Learning Humanoid Locomotion Via Disentangled State Reconstruction",
      "session": "ThBT4",
      "date": "2026-10-29",
      "start": "16:40",
      "end": "16:55",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "342647",
          "name": "Lee, Seokju",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        },
        {
          "id": "506497",
          "name": "Lim, Jeonghyeok",
          "affiliation": "KAIST"
        },
        {
          "id": "417305",
          "name": "Lee, Jeong tae",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "273780",
          "name": "Kang, Jeonguk",
          "affiliation": "Samsung Research, Samsung Electronics"
        },
        {
          "id": "294293",
          "name": "Han, Seungho",
          "affiliation": "Hanyang University ERICA"
        },
        {
          "id": "185961",
          "name": "Park, Dongil",
          "affiliation": "Korea Institute of Machinery and Materials (KIMM)"
        },
        {
          "id": "126125",
          "name": "Kim, Kyung-Soo",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper proposes a disentangled state reconstruction framework for humanoid locomotion. Proprioceptive humanoid locomotion over diverse terrains remains a challenging problem due to instability arising from bipedal contact. While quadrupedal robots exhibit high stability and can robustly traverse rough terrains, humanoid locomotion has a limitation in that it is difficult to handle such terrains without accurate terrain estimation. To address this issue, various methods have been proposed to estimate extrinsic states of the robot, such as terrain information, solely from observation history. However, since intrinsic and extrinsic states are estimated jointly, the representations become entangled, causing interference between the information required for each. To overcome this limitation, we propose Disentangled State Reconstruction (DSR), which separates state reconstruction based on temporal scales. Specifically, intrinsic states, such as the robot’s linear velocity, are reconstructed using short-term observation history, whereas extrinsic states, such as terrain information, are reconstructed using longer-term observation history. The proposed DSR demonstrates improved locomotion performance on most evaluated terrains in simulation, particularly on terrains involving discontinuous or irregular contact interactions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt4_05"
    },
    {
      "id": "ThBT4.6",
      "paperId": "385",
      "title": "HieMoE-WL: Hierarchical Skill Composition for Wheel-Legged Quadruped Locomotion",
      "session": "ThBT4",
      "date": "2026-10-29",
      "start": "16:55",
      "end": "17:10",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "458586",
          "name": "Wang, Pengju",
          "affiliation": "Waseda University"
        },
        {
          "id": "401753",
          "name": "Zhang, Yilin",
          "affiliation": "Waseda University"
        },
        {
          "id": "458562",
          "name": "Sun, Huimin",
          "affiliation": "WASEDA University"
        },
        {
          "id": "458545",
          "name": "Liu, Ruitong",
          "affiliation": "Waseda University"
        },
        {
          "id": "101936",
          "name": "Hashimoto, Kenji",
          "affiliation": "Waseda University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Wheel-legged quadruped robots need to combine three behaviorally distinct skills: rolling at speed, crossing stairs, and recovering from falls. Because their training objectives can conflict, a single end-to-end policy can struggle to learn all three at once. HieMoE-WL is a three-stage hierarchical mixture-of-experts framework that decouples skill acquisition from composition. Dedicated experts are learned, a privileged heightmap-gated teacher composes them via soft gating, and DAgger distills a proprio-only student. In IsaacLab on the Unitree Go2-W, the student matches its teacher and completes 97% of the course, versus 77% for a tuned rule-based switch over the same experts. A solo Recovery expert achieves 100% isolated get-up but does not locomote afterward; composition achieves 83% and keeps moving. A directly trained monolithic baseline recovers from only a third of mid-course falls and finishes 35% of runs; under the tested configurations it did not retain all three skills at once.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt4_06"
    },
    {
      "id": "ThBT6.1",
      "paperId": "146",
      "title": "Situation Aware Locomotion for Dual Mobile Cobots in Shared Environments",
      "session": "ThBT6",
      "date": "2026-10-29",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525669",
          "name": "Moraes de los Santos, William Michael",
          "affiliation": "Universidad Tecnológica Del Uruguay"
        },
        {
          "id": "524781",
          "name": "Nunes da Costa, Igor",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "524779",
          "name": "Mazondo, Ahilen",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "524617",
          "name": "Barcelona, Sebastian",
          "affiliation": "UTEC"
        },
        {
          "id": "270442",
          "name": "Grando, Ricardo",
          "affiliation": "Federal University of Rio Grande"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents a situation aware locomotion framework for two mobile collaborative robots operating in shared industrial environments. The proposed method models situation awareness through perception, comprehension, and projection to support locomotion decisions. Robot pose, load state, manipulator state, shared zone occupancy, obstacle state, and predicted inter robot conflict were used to select safe locomotion actions. The framework was implemented in simulation and evaluated in simulated industrial scenarios designed to match a feasible 4 m by 4 m physical test area. The proposed method was compared with two other baselines over multiple trials and randomized seeds. The results show that the situation aware method achieved 100% task success across all scenarios, while the independent and fixed priority baselines each achieved 33.3% overall success. The proposed method eliminated shared zone conflicts and safety stops, maintained the largest average minimum inter robot distance, and completed the tasks with the lowest average completion time. These results indicate that situational awareness can improve the locomotion of dual robots by combining load state, manipulator state, reasoning about the shared zone, and prediction of short-horizon conflicts.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt6_01"
    },
    {
      "id": "ThBT6.2",
      "paperId": "224",
      "title": "Situation Aware Frontier Prioritization for Quadruped Search and Rescue",
      "session": "ThBT6",
      "date": "2026-10-29",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524783",
          "name": "Farias, Kevin",
          "affiliation": "Universidad Tecnológica Del Uruguay"
        },
        {
          "id": "524615",
          "name": "Martin, Santiago",
          "affiliation": "Universidad Tecnológica Del Uruguay"
        },
        {
          "id": "524782",
          "name": "Flores, Bárbara",
          "affiliation": "Universidad Tecnológica Del Uruguay"
        },
        {
          "id": "524618",
          "name": "Melgar, Vinicio",
          "affiliation": "UTEC"
        },
        {
          "id": "524781",
          "name": "Nunes da Costa, Igor",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "410764",
          "name": "Jacobs, Hiago",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "524619",
          "name": "Moraes, Pablo",
          "affiliation": "Universidad Tecnologica Del Uruguay"
        },
        {
          "id": "270442",
          "name": "Grando, Ricardo",
          "affiliation": "Federal University of Rio Grande"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Quadruped robots are a promising platform for search and rescue missions because they can navigate cluttered indoor environments that may be restrictive for wheeled systems. However, in unknown rescue scenarios, autonomous exploration must balance map expansion with the likelihood of finding victims, which is not explicitly addressed by classical frontier selection strategies. This paper presents the Situation Aware Frontier Prioritization (SAFP) method for single robot quadruped search and rescue. The proposed approach preserves the frontier exploration framework, but extends frontier ranking with information gain, observation deficit, rescue relevance, terrain penalty, and travel cost. The method is evaluated in Gazebo simulation with a quadruped robot in two indoor rescue scenarios with different levels of difficulty. The first scenario is used as a sanity check, while the second introduces stronger clutter and frontier ambiguity. Experimental results show that all methods perform reliably in a simple scenario, whereas in a complex scenario is different. In that setting, the proposed method achieves the highest completion rate and the highest victim recovery among the evaluated approaches. These results indicate that SAFP is beneficial when frontier choice becomes nontrivial and rescue utility must be balanced against generic exploration objectives.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt6_02"
    },
    {
      "id": "ThBT6.3",
      "paperId": "268",
      "title": "Trajectory-Level Task Transition for Sequential Humanoid Manipulation Tasks",
      "session": "ThBT6",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525564",
          "name": "Kim, Jeongwoo",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "490602",
          "name": "Park, Jinsu",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "398474",
          "name": "Dong, Jeyoun",
          "affiliation": "Electronics and Telecommunications Research Institute"
        },
        {
          "id": "404961",
          "name": "Park, Chan-eun",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Control Theory and Applications"
      ],
      "abstract": "This study addresses state mismatch in the sequential execution of independently learned robot task policies. In sequential manipulation tasks, the terminal state of a preceding policy may vary across executions, leading to joint position and velocity mismatches between two policies. To reduce this mismatch, we propose a sliding-surface-based transition generation method that selects a target state from the first action chunk of the subsequent policy and generates an intermediate trajectory using joint position and velocity errors. The proposed dynamics is designed to provide trajectory-level convergence toward the selected target state. MuJoCo simulations with a Unitree G1 humanoid robot on sequential drawer-opening and pick-and-place tasks show that the proposed method achieves balanced performance in task success rate, transition smoothness, and terminal state error.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt6_03"
    },
    {
      "id": "ThBT6.4",
      "paperId": "53",
      "title": "A MAPE-K Architecture for Traceable Digital Risk Assessment in HRC: Graph-Based Spatio-Temporal Hazard Modeling",
      "session": "ThBT6",
      "date": "2026-10-29",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "448639",
          "name": "Scharping, Robert",
          "affiliation": "Fraunhofer Institute for Factory Operation and Automation IFF"
        },
        {
          "id": "448646",
          "name": "Bollmann, Yannick",
          "affiliation": "Fraunhofer Institute for Factory Operation and Automation IFF"
        },
        {
          "id": "141812",
          "name": "Behrens, Roland",
          "affiliation": "Fraunhofer IFF"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": "Risk assessment for collaborative robot applications is still largely a manual, paper-based process that lacks formal traceability and scales poorly with system complexity. This paper maps the iterative ISO 12100 risk assessment process onto a MAPE-K (Monitor-Analyze-Plan-Execute-Knowledge) loop whose Knowledge layer is a directed graph with typed nodes and constrained edges. Each iteration corresponds to one ISO~12100 revision cycle, and all intermediate states are persisted, which keeps the reduction path from initial to residual risk traceable. Hazards are localized in time by normalized progress values and in space by the spatial extent of an entity. Each hazard records the validity band of its evidence, which reduces change detection to a comparison and enables incremental re-evaluation. A collaborative pick-and-place case study covers three iterations for hazard identification, countermeasure modeling, and selective re-evaluation. The architecture provides a methodological foundation for digital risk assessment tools whose granularity scales with the available data.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt6_04"
    },
    {
      "id": "ThBT6.5",
      "paperId": "124",
      "title": "Accelerating Human-Aware Robot Trajectory Generation Via Diffusion and Consistency Distillation",
      "session": "ThBT6",
      "date": "2026-10-29",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "389554",
          "name": "Ham, Byeong-Il",
          "affiliation": "KAIST"
        },
        {
          "id": "335551",
          "name": "Kim, Hyun-Bin",
          "affiliation": "KAIST"
        },
        {
          "id": "126125",
          "name": "Kim, Kyung-Soo",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Human-Robot Interaction",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This research proposes a constrained motion planning framework for robot manipulators in human-robot interaction (HRI). For a non-redundant manipulator with a fully specified end-effector pose, additional requirements such as collision avoidance and self-collision avoidance are difficult to handle as simple null-space secondary tasks. This limitation makes it challenging to generate feasible joint-space trajectories in HRI environments where safety and kinematic constraints must be considered simultaneously. To address this limitation, collision- and self-collision-aware trajectories are generated using Rapidly-exploring Random Tree (RRT) and RRT* algorithms, and the resulting dataset is used to train a diffusion model that generates constraint-satisfying trajectories through guided sampling. To reduce the inference time required for iterative diffusion sampling, consistency distillation is applied, and a joint-weighted jerk regularization term is incorporated into the loss function to promote smoother trajectories. Simulation results show that the consistency model generates 150 trajectory candidates in less than 100 ms, maintains a high episode success rate, and substantially reduces joint and end-effector jerk when jerk regularization is applied.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt6_05"
    },
    {
      "id": "ThBT6.6",
      "paperId": "320",
      "title": "A Cloud-Based Robotic Bathing System with Anatomy-Aware Perception for Elderly",
      "session": "ThBT6",
      "date": "2026-10-29",
      "start": "16:55",
      "end": "17:10",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527347",
          "name": "Qasem, Arfan Ali Mohammed",
          "affiliation": "Southeast University"
        },
        {
          "id": "466874",
          "name": "Liang, Han",
          "affiliation": "Southeast University"
        },
        {
          "id": "451160",
          "name": "Al-shameri, Mohammed Ail Abdurahman",
          "affiliation": "Southeast University"
        },
        {
          "id": "527367",
          "name": "Sibtain, Muhammad",
          "affiliation": "Southeast University, China"
        },
        {
          "id": "527357",
          "name": "Shaybo, Ahmed Sharif",
          "affiliation": "Southeast University"
        },
        {
          "id": "527355",
          "name": "Jibreel, Alnoman Bashir Abdalla",
          "affiliation": "Southeast University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Human-Robot Interaction",
        "Robot Vision"
      ],
      "abstract": "Due to the rapid expansion of the elderly population and the growing scarcity of caregivers, there is an urgent need for safe, comfortable assistive robotic devices. This study develops a cloud-based robotic bathing system for elderly and bedridden people. The proposed system combines compliant robotic interaction with anatomy-aware semantic body\u0002region perception and cloud-supported task processing, thereby enhancing both safety and operational flexibility. The system uses a 5-DoF robotic arm with a soft-contact end-effector to support gentle physical interaction during bathing. To support accurate body-region understanding, a SegFormer-based semantic segmentation model is used. The model was trained on a 20-class anatomical dataset collected from full-scale male and female mannequins. The dataset included different body postures, lighting conditions, and viewpoints to improve perception robustness. Experimental evalua\u0002tion showed good segmentation performance with a mean Intersection over Union (mIoU) of 76.33%, pixel accuracy of 96.63%, and mean class accuracy of 92.95%. The robotic platform successfully reached 16 of 18 predefined anatomical target regions, achieving 88.9% workspace coverage with an average trajectory execution time of 16 s. Optimization of the perception pipeline and cloud-assisted processing reduced the total operational latency to approximately 2.443 s. These results demonstrate the prototype-level feasibility of integrating anatomy-aware perception, cloud coordination, and compliant robotic execution for adaptive robotic bathing assistance in elderly-care applications.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt6_06"
    },
    {
      "id": "ThBT7.1",
      "paperId": "484",
      "title": "Quality-Centric Demonstration Augmentation for Small VLA Model",
      "session": "ThBT7",
      "date": "2026-10-29",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525319",
          "name": "Jeong, Hong-Ju",
          "affiliation": "University of Science and Technology(UST)"
        },
        {
          "id": "360179",
          "name": "Lim, Yoongu",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "155753",
          "name": "Lee, Duk Yeon",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "243391",
          "name": "Choi, Dongwoon",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "141159",
          "name": "Lee, Dong-Wook",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control",
        "Human-Robot Interaction"
      ],
      "abstract": "Simulation-based demonstration augmentation reduces the cost of collecting robot manipulation data by synthesizing training trajectories from a few human demonstrations. Prior augmentation methods add every generated trajectory to training, on the assumption that more generated data yields a better policy. We test this assumption in a resource-constrained regime — a low-cost manipulator with five joints and a gripper (SO-101) and a small Vision-Language-Action model (SmolVLA), fine-tuned on nine human demonstrations plus 50 generated ones — and find that it does not hold. The augmented policy succeeded in 28.3% of episodes, below the 40.0% human-only baseline. The failure took an unusual form: the policy froze mid-episode in 60% of episodes rather than manipulating poorly. The harmful episodes were nearly indistinguishable from clean ones under every static check we applied. The generation process, however, provides a usable signal: generation reliability decreases monotonically with distance from the source demonstrations. Selecting candidates by a single distance threshold derived from these failure logs raised the success rate to 65.0%, eliminated the freezing entirely, and produced a policy that outperformed the baseline beyond its training coverage. In low-data fine-tuning of small VLA models, augmentation succeeds or fails by data selection, not by data volume.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt7_01"
    },
    {
      "id": "ThBT7.2",
      "paperId": "408",
      "title": "Reliability of Coverage-Based Severity Estimation for Automated Post-Harvest Mango Inspection",
      "session": "ThBT7",
      "date": "2026-10-29",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527991",
          "name": "Boonkerd, Nalinpron",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "528163",
          "name": "Kummoung, Thunrada",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "416139",
          "name": "Ploysuwan, Tuchsanai",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Industrial Applications of Control"
      ],
      "abstract": "Post-harvest mango grading needs lesion-coverage estimation beyond a disease label, yet dense lesion masks are expensive and exist for only some classes. This paper presents an empirical study of a coverage-based severity pipeline, focusing on reliability, supervision, and failure modes rather than architectural novelty. The pipeline (Disease-Aware Mango Coverage, DAMC) feeds a ResNet-50 classifier into a Feature Pyramid Network (FPN) segmentor, with optional rule-based post-processing. On a 126-image SenMangoFruitDDS test set, the central finding is that the raw FPN mask should be retained: against human polygon annotations it scored a higher mean Dice (0.6605) than the rule-gated (0.6448) or always-on rule (0.5357) output. The rule stage is therefore best kept only as a reliability flag, and a Stage-2-only pipeline suffices for deployment. The FPN coverage reached a quadratic-weighted Cohen’s κ of 0.8514 against expert grades, but this exceeded a coverage-blind class-prior baseline by only about 0.07 κ, so coverage mainly resolves within-class severity rather than replacing the disease label. Ground-truth masks alone achieved comparable agreement, indicating that pseudo-masks mainly serve as a practical fallback for unannotated classes. Coverage remains an imperfect proxy for severity: for Stem-End Rot, ripening false positives and possible label inconsistencies impose a ceiling that coverage alone cannot overcome. Because the evidence comes from a single small test set, one annotator, and one favorable split, the guidance is dataset-specific and calls for multi-annotator ground truth and external validation before it is generalized.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt7_02"
    },
    {
      "id": "ThBT7.3",
      "paperId": "409",
      "title": "A Two-Stage Industrial Anomaly Inspection Framework Using PatchCore-DINOv2 and Compact Vision-Language Model Integration",
      "session": "ThBT7",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528169",
          "name": "Raktham, Saritpop",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "528171",
          "name": "Ambangyung, Suttisak",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        },
        {
          "id": "416139",
          "name": "Ploysuwan, Tuchsanai",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Industrial Applications of Control"
      ],
      "abstract": "Automated visual inspection in manufacturing requires high defect recall and human-interpretable rejection rationale—properties that existing score-based anomaly detectors seldom provide simultaneously. This paper presents a two-stage inspection framework and systematically investigates whether compact vision-language models (VLMs) can serve as semantic arbiters for borderline anomaly decisions. In the first stage, a PatchCore memory bank on a frozen DINOv2 ViT-B/14 backbone scores each image and routes it through a three-zone policy—direct pass, direct reject, or a VLM zone for borderline cases—with thresholds fixed on a held-out validation split. In the second stage, a compact VLM inspects the region-of-interest crop and returns a structured PASS/REJECT verdict, defaulting to REJECT for malformed responses (fail-safe). On MVTec AD the DINOv2 backbone reaches a mean AUROC of 0.947, matching a WideResNet-50 PatchCore baseline with category-dependent trade-offs. Our central finding is negative: every compact VLM tested fails as a Stage-2 arbiter. The three free-generation models (Moondream2, Phi-3.5-Vision, LLaVA-1.5-7B) collapse to an explicit reject-all baseline, while Qwen2.5-VL passes every borderline defect from 3B to 32B—reporting no defect at all, a grounding rather than a decision failure that constrained decoding does not fix. Cross-dataset evaluation on VisA shows degraded performance that a matched-ratio ablation attributes predominantly to reduced coreset density rather than domain shift.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt7_03"
    },
    {
      "id": "ThBT7.4",
      "paperId": "62",
      "title": "Multilingual Speech Emotion Recognition Using Per-Language ResNet with Automatic Language Detection",
      "session": "ThBT7",
      "date": "2026-10-29",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "522299",
          "name": "Kaewarram, Palus",
          "affiliation": "Kmitl"
        },
        {
          "id": "523688",
          "name": "Aiemburanont, Natthapol",
          "affiliation": "KMITL"
        },
        {
          "id": "406652",
          "name": "Anuntachai, Anuntapat",
          "affiliation": "KMITL"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": "This paper presents a Multilingual Speech Emotion Recognition (Multilingual SER) system using a Per-Language ResNet architecture trained separately for each of five languages: Thai, Chinese, Japanese, Korean, and English. A key finding from prior research is that a single Unified Multilingual Model suffers from Prosody Mismatch — each language has distinctly different pitch contours, speech rates, and energy patterns for the same emotion, causing the model to confuse language characteristics with emotion characteristics. The Per-Language approach resolves this by allowing each ResNet model to learn emotion patterns within the prosodic context of its own language. The system employs an automatic Language Detector (SVM pipeline: StandardScaler → PCA(80) → SVM RBF) that identifies the spoken language from 128×130 Mel Spectrogram features before routing audio to the appropriate emotion model. Experimental results on held-out test sets demonstrate per-language accuracy of: Thai 88.40%, Chinese 86.62%, Japanese 84.36%, English 82.84%, and Korean 72.62% (SVM deployed model). The overall deployed system accuracy is 82.97%, surpassing the 75% paper target. The Language Detector achieves 98.54% accuracy on a 5-class language classification task. The paper additionally includes a Gradio-based Web Demo and a cross-lingual feature analysis module for studying emotion pattern similarities across languages.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt7_04"
    },
    {
      "id": "ThBT7.5",
      "paperId": "137",
      "title": "Test-Driven Agentic Framework for Reliable Robot Controller Synthesis",
      "session": "ThBT7",
      "date": "2026-10-29",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "504694",
          "name": "Tripathi, Shivanshu",
          "affiliation": "University of California, Riverside"
        },
        {
          "id": "505494",
          "name": "Akbarian Bafghi, Reza",
          "affiliation": "University of Colorado, Boulder"
        },
        {
          "id": "504721",
          "name": "Raissi, Maziar",
          "affiliation": "University of California Riverside"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": "In this work, we present a test-driven, agentic framework for synthesizing a deployable robot controller for navigation tasks. Our approach uses large language models (LLMs) to generate controller code and evaluates it through user defined PyTest suites that capture task-specific performance and deployment requirements. To improve reliability and executability, we introduce a dual-tier repair strategy that alternates between prompt refinement and direct code editing, enabling iterative correction of reasoning and implementation errors. We evaluate the framework on (i) 2D map-based navigation, and (ii) 3D Webots simulation. Experimental results show that test-driven synthesis substantially improves controller reliability and robustness over one-shot controller generation, especially when the initial prompt is underspecified.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt7_05"
    },
    {
      "id": "ThBT7.6",
      "paperId": "405",
      "title": "A Multi-Stream Hierarchical Head for Automatic Pronunciation Assessment",
      "session": "ThBT7",
      "date": "2026-10-29",
      "start": "16:55",
      "end": "17:10",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528153",
          "name": "Jeankor, Benjamaporn",
          "affiliation": "School of Information Technology, King Mongkut’s Institute of Technology Ladkrabang"
        },
        {
          "id": "416139",
          "name": "Ploysuwan, Tuchsanai",
          "affiliation": "King Mongkut's Institute of Technology Ladkrabang"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems",
        "Multimedia Systems"
      ],
      "abstract": "Automatic pronunciation assessment (APA) gives second-language learners fine-grained, multi-aspect feedback at the phone, word, and utterance levels. State-of-the-art systems increasingly fine-tune large self-supervised speech encoders. Updating hundreds of millions of parameters, however, is computationally expensive and tends to over-fit the few thousand expert-scored utterances typical of APA datasets. We show that once the encoder is frozen, the dominant lever is not trunk size but complementary per-phone feature engineering and training objectives. Our model, Qwen3-APA, keeps a pre-trained Qwen3-ASR encoder frozen and trains only a compact 1.26M-parameter hierarchical head, comparable in trainable size to the HMamba baseline. A learned gated fusion combines eight complementary per-phone streams: four goodness-of-pronunciation (GOP) variants, namely canonical, class-normalized, second-recognizer, and SSL-template, together with articulatory, prosodic, and two self-supervised views. The head then refines the phone-, word-, and utterance-level representations with a dilated temporal-convolution branch and a residual graph-convolution module, all in a single forward pass. Qwen3-APA ranks first among the compared systems on eight of the ten SpeechOcean762 metrics, including a sentence-level total PCC of 0.839. It also reaches 0.746 on completeness, well above the 0.16–0.51 of prior systems.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt7_06"
    },
    {
      "id": "ThBT8.1",
      "paperId": "105",
      "title": "Two-Stage Robust Scheduling of an Integrated Energy System (IES) with Reversible Solid Oxide Cell under Uncertainties (I)",
      "session": "ThBT8",
      "date": "2026-10-29",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525372",
          "name": "Oh, Hee Jin",
          "affiliation": "Incheon National University"
        },
        {
          "id": "409324",
          "name": "Kim, Jong Woo",
          "affiliation": "Incheon National University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This study proposes a two stage robust scheduling framework for 24 h scheduling of a renewable energy integrated reversible solid oxide cell (RSOC) system. The proposed framework aims to coordinate the operation of the RSOC, BESS, utility grid, and hydrogen storage under renewable generation and process response uncertainties. Mode specific process responses of the SOFC and SOEC modes are generated from IDAES based steady state process models and converted into affine surrogate models for integration into a MILP scheduling formulation. The scheduling model jointly considers RSOC mode selection, electricity and hydrogen storage balances, BESS operation, hot standby operation, and a thermal cycling proxy. The resulting scheduling problem is formulated as a two stage robust MILP and solved using a column and constraint generation framework. The 24 h robust scheduling results show that the proposed model provides stable operation under the identified worst case renewable scenario while satisfying electricity and hydrogen balance constraints. These results demonstrate the applicability of the proposed framework to robust operation of RSOC systems under renewable uncertainty.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt8_01"
    },
    {
      "id": "ThBT8.2",
      "paperId": "298",
      "title": "Generative Domain Adaptation for Fault Diagnosis Via Style Transfer under a Target-Fault-Unavailable Constraint (I)",
      "session": "ThBT8",
      "date": "2026-10-29",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526635",
          "name": "Roh, Hae Rang",
          "affiliation": "Seoul National University"
        },
        {
          "id": "405162",
          "name": "Lee, Jong Min",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Process Control Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Although unsupervised domain adaptation (UDA) has emerged as a promising solution to mitigate data distribution shifts caused by varying operating conditions, conventional UDA methods typically assume the availability of all fault classes in the target domain. In practical chemical processes, however, collecting a comprehensive set of target fault data is highly challenging due to the scarcity of fault occurrences, whereas normal operating data is easily accessible. To address this extreme class-asymmetric challenge, this paper proposes a generative UDA fault diagnosis framework tailored for scenarios where the target domain fault data is entirely unavailable. The proposed methodology executes a multi-level statistics alignment coupled with a style transfer mechanism. This approach dynamically injects channel-wise target normal statistics into source fault features, thereby synthesizing pseudo-fault samples that reflect target-specific process dynamics without disrupting the latent space topology. Additionally, a supervised contrastive learning objective is integrated to prevent feature collapse and effectively expand the generalization margins of fault decision boundaries toward the target domain. Evaluated on the Tennessee Eastman process benchmark, the proposed framework overwhelmingly outperforms existing UDA and domain generalization techniques, demonstrating robust diagnostic performance even with minimal target normal samples.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt8_02"
    },
    {
      "id": "ThBT8.3",
      "paperId": "301",
      "title": "Context-Aware Adaptive Reinforcement Learning Control under Non-Stationary Markov Decision Process (I)",
      "session": "ThBT8",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526713",
          "name": "Kim, Haechang",
          "affiliation": "Seoul National University"
        },
        {
          "id": "526714",
          "name": "Park, Joonsoo",
          "affiliation": "Seoul National University"
        },
        {
          "id": "405162",
          "name": "Lee, Jong Min",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Artificial Intelligence Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "Most existing reinforcement learning (RL) controllers assume its operation on stationary Markov decision process (MDP), which limits their applicability to chemical processes operating under continuously evolving conditions and disturbances. Factors such as catalyst deactivation, external disturbances and equipment fouling induce variations in process dynamics, necessitating adaptive control strategies with justifications. To address this issue, we develop an adaptive RL control framework for non-stationary MDPs that learns a latent context belief from recent state-action trajectories and augments it to the state representation. Based on meta-RL, the controller is exposed to multiple operating conditions, training additional context encoder network to quickly estimate current drift status with minimum amount of samples. The learned latent context also enables analysis of underlying MDP variations throughout process evolution. Experimental results on a continuous drift scenario within CSTR reactor benchmark demonstrate the adaptivity and robustness of our method to process drift. Moreover, the latent vector has been well aligned to the parameter changes, providing operators with additional insight into the model's decision under process drift.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt8_03"
    },
    {
      "id": "ThBT8.4",
      "paperId": "317",
      "title": "A Factorial Comparison of Vision–Language–Action Models for Chemistry Laboratory Manipulation (I)",
      "session": "ThBT8",
      "date": "2026-10-29",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "461870",
          "name": "Oh, Sung Woo",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "405068",
          "name": "Oh, Tae Hoon",
          "affiliation": "UNIST"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Robot Vision"
      ],
      "abstract": "Vision-Language-Action models promise general purpose robot manipulation, yet existing benchmarks are dominated by household pick-and-place tasks and hardly evaluate the wet lab manipulation skills required for chemistry automation such as transferring glassware, pouring liquids between glassware, and rotating valves. We present a factorial study that compares one specialist imitation policy, Action Chunking with Transformers, with two generalist Vision-Language-Action models, π0 and π0.5, across three chemistry lab manipulation tasks and three teleoperation dataset sizes of 50, 100, and 200 demonstrations, trained on identical hardware. Each of the resulting nine conditions defined by model and dataset size is evaluated on every task by five trials of two consecutive attempts, for a total of 270 attempts across the three tasks. We report a 50-point rubric score, computed as 10 points per trial summed over the five trials of each condition, as the primary metric, and time-to-success as a secondary indicator. The results characterize the data efficiency knee of each model family on chemistry tasks and inform practical model selection for laboratory deployments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt8_04"
    },
    {
      "id": "ThBT8.5",
      "paperId": "326",
      "title": "Explainable Offline Reinforcement Learning Via Graph-Based Semantic Regime Partitioning for Process Control (I)",
      "session": "ThBT8",
      "date": "2026-10-29",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527486",
          "name": "Shin, Junseop",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "405162",
          "name": "Lee, Jong Min",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Artificial Intelligence Systems",
        "Process Control Systems"
      ],
      "abstract": "Reinforcement learning (RL) offers a powerful data-driven paradigm for chemical process control, yet safety constraints and biased operation logs pose significant practical barriers to its deployment. We present GRAM-QT (Graph-based Regime-Aware Mixture-of-Q-Transformers), an offline RL framework that addresses these challenges through self-supervised semantic regime partitioning. Raw operational data are encoded as directed variable graphs and processed by a graph attention transformer, which captures complex multivariate dependencies while identifying distinct operating regimes in an interpretable manner. Rather than relying on a single monolithic policy, the framework deploys a specialized expert Q-transformer for each discovered regime and synthesizes control actions by aggregating regime-specific Q-values, weighted by the membership of the current process state in each regime. This avoids the unreliability of global policy averaging and sustains performance even under data-sparse, out-of-distribution conditions. On the industrial-scale IndPenSim fed-batch penicillin benchmark, GRAM-QT recovers the biological growth phases without supervision and exhibits smooth, interpretable expert switching aligned with the underlying phase transitions. As a result, it improves penicillin yield by 43% over a single global Q-transformer while outperforming representative offline RL baselines.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt8_05"
    },
    {
      "id": "ThBT9.1",
      "paperId": "126",
      "title": "Model Predictive Control with Heterogeneous Actuation Dead-Time Compensation for Trajectory Tracking of Autonomous Surface Vessels",
      "session": "ThBT9",
      "date": "2026-10-29",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "349732",
          "name": "Park, Kiyong",
          "affiliation": "KAIST"
        },
        {
          "id": "242803",
          "name": "Lee, Changyu",
          "affiliation": "Kongju National University"
        },
        {
          "id": "162950",
          "name": "Kim, Jinwhan",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Control Theory and Applications",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents a disturbance observer–based model predictive control (DOB–MPC) framework with heterogeneous actuation dead-time compensation for precise trajectory tracking of autonomous surface vessels (ASVs). ASVs pose significant control challenges due to underactuation, environmental disturbances such as wind, waves, and currents, and different actuator dynamics, where command transmission, engine response, and propeller slip introduce heterogeneous input-to-thrust time delay. Ignoring these heterogeneous delay characteristics leads to inaccurate disturbance estimation and degraded tracking performance. The proposed framework integrates a dead-time compensator (DTC) and a DOB within MPC: the DTC predicts future vessel states over the dead-time horizon to provide a delay-compensated initial condition for MPC while synchronizing heterogeneous actuator inputs for consistent disturbance estimation, while the DOB estimates disturbances and model uncertainties for real-time compensation within the MPC prediction model. The effectiveness of the proposed framework is validated through numerical simulations and full-scale sea trials on an 8 m ASV, demonstrating substantial improvements in trajectory-tracking accuracy compared with conventional MPC methods.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt9_01"
    },
    {
      "id": "ThBT9.2",
      "paperId": "609",
      "title": "Leader-Velocity Prediction-Assisted Flocking Control for Cooperative Autonomous Delivery Vehicles",
      "session": "ThBT9",
      "date": "2026-10-29",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527564",
          "name": "Wang, Lin",
          "affiliation": "Hiroshima University"
        },
        {
          "id": "528808",
          "name": "Xue, Yongjie",
          "affiliation": "The University of Hong Kong"
        },
        {
          "id": "528810",
          "name": "Yu, Bin",
          "affiliation": "Beihang University"
        },
        {
          "id": "528809",
          "name": "Feng, Tao",
          "affiliation": "Hiroshima University"
        }
      ],
      "keywords": [
        "Autonomous Delivery Vehicles",
        "Leader-Velocity Prediction",
        "Flocking Control",
        "Cooperative Control"
      ],
      "abstract": "A two-layer cooperative control strategy for multiple autonomous delivery vehicles (ADVs) is proposed in this paper. In the upper layer, a sequence model is trained offline using historical driving data to predict the velocity of the leader ADV, and a Transformer is selected according to a predefined validation criterion. In the lower layer, a leader-velocity-guided flocking controller based on the Olfati-Saber model is adopted for online cooperative control of the follower ADVs. The predicted leader velocity is introduced into the lower-layer controller as a time-varying reference, enabling the follower ADVs to respond in advance to changes in leader motion. Simulations covering the complete route are conducted with different leader velocity inputs to verify the proposed strategy. The results show that the predicted velocity reference reduces tracking error compared with the current and delayed leader velocity inputs. These results demonstrate the effectiveness of integrating offline leader-velocity prediction with online multi-ADV flocking control under the considered simulation conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt9_02"
    },
    {
      "id": "ThBT9.3",
      "paperId": "88",
      "title": "A Multi-Resolution Any-Angle Global Planner for Aerial–Ground Robots",
      "session": "ThBT9",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "348874",
          "name": "Park, Chanjoon",
          "affiliation": "Korea Advanced Institute of Science & Technology"
        },
        {
          "id": "286867",
          "name": "Jeong, Myeongwoo",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Aerial-ground robots improve energy efficiency through ground driving while retaining the ability to traverse obstacles by flight. However, global planning for such robots must jointly decide path geometry and ground-versus-aerial mode selection while remaining computationally efficient in large-scale 3D environments. Existing aerial-ground navigation planners can generate feasible energy-aware paths, but grid-based or decoupled planning methods often struggle to achieve short path geometry, mode-aware behavior, and low online search time simultaneously. To address this gap, we propose a multi-resolution any-angle global planner for aerial-ground robots. The planner combines hierarchical free-space expansion, Lazy Theta*-style direct connection, and a mode-aware edge cost for ground travel, aerial travel, altitude change, and mode transition. Because this cost is evaluated inside the same search that produces the any-angle geometry, the planner generates platform-aware paths without separating geometric path generation from platform-mode selection. In simulation across open, wall-passage, and cluttered environments, the proposed planner solves all queries and achieves the lowest search time and shortest path length among the evaluated baselines. In the hardest environment, where the grid-based energy-aware baseline times out under the shared 5 s budget, it reduces mean online search time by 66.2% and path length by 5.4% relative to the only remaining baseline that solves all queries. The proposed method therefore provides fast global path generation and the shortest evaluated paths, with energy remaining comparable by using aerial segments selectively where they provide useful obstacle crossings for aerial-ground robots.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt9_03"
    },
    {
      "id": "ThBT9.4",
      "paperId": "5",
      "title": "Cooperative Multi-Robot System for Autonomous Fruit Harvesting",
      "session": "ThBT9",
      "date": "2026-10-29",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "317866",
          "name": "Chuang, Ching-Wei",
          "affiliation": "National Taiwan University of Science and Technology"
        },
        {
          "id": "519601",
          "name": "Chen, An-Lin",
          "affiliation": "National Taiwan University of Science and Technology"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes a fully decentralized and time-extended task-allocation framework for heterogeneous agricultural multi-robot systems in fruit-harvesting applications. A Bayesian Network with an integrated priority mechanism is developed to evaluate the success probability of each task and the success utility of each task bundle by jointly considering robot hardware capability, task requirements, energy fulfillment, and task priority. Based on these inferred probabilities, each robot independently evaluates feasible task bundles and submits bids through a decentralized auction process. A genetic algorithm is applied to determine the optimal execution order within each task bundle, and mixed integer linear programming is used to identify the allocation solution that maximizes the overall success probability. Experiments conducted in an indoor simulated agricultural environment using two heterogeneous mobile robots demonstrate that the proposed framework can reliably allocate tasks according to robot hardware capabilities and task information while maintaining a high overall task success probability, reliability, and adaptability under varying harvesting conditions and task-priority settings.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt9_04"
    },
    {
      "id": "ThBT9.5",
      "paperId": "42",
      "title": "Impact of Design Modernization on Seismic Signal Recording Quality in Autonomous Seismic Acquisition Device (ASAD)",
      "session": "ThBT9",
      "date": "2026-10-29",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524468",
          "name": "Kartashova, Mariia",
          "affiliation": "Aramco Research Center - Moscow"
        },
        {
          "id": "340310",
          "name": "Timoshenko, Artem",
          "affiliation": "Aramco Research Center - Moscow"
        },
        {
          "id": "219741",
          "name": "Yashin, Grigoriy",
          "affiliation": "Aramco Research Center - Moscow"
        },
        {
          "id": "374077",
          "name": "Hamadov, Rustam",
          "affiliation": "Aramco Research Center - Moscow"
        },
        {
          "id": "524470",
          "name": "Danilin, Maksim",
          "affiliation": "Aramco Research Center – Moscow"
        },
        {
          "id": "524471",
          "name": "Popkov, David",
          "affiliation": "Aramco Research Center – Moscow"
        },
        {
          "id": "374089",
          "name": "Golikov, Pavel",
          "affiliation": "EXPEC Advanced Research Center"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "Conventional seismic data acquisition involves several labor-intensive stages, including delivery, placement of sensors, data recording, and sensor retrieval, which are accompanied by significant time and labor costs, as well as operational challenges in difficult terrain and extreme climatic conditions. For this reason, there is a need to automate field operations. One of the developing areas is the use of UAVs for sensor delivery, deployment, data acquisition, and return to base. This paper presents experimental results obtained during the modernization of these UAVs for seismic data acquisition by switching to recording seismic data using accelerometers only. Two experiments were conducted: the first was aimed at validating the performance of the new UAV configuration under field conditions, while the second focused on comparing the quality of the recorded seismic signal among different versions of Autonomous Seismic Acquisition Devices (ASADs). The results showed that the updated version of the robot is superior to the previous generation in terms of signal quality, while also providing greater reliability and ease of use.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt9_05"
    },
    {
      "id": "ThBT9.6",
      "paperId": "277",
      "title": "Adaptive RBF Control, and Constrained Optimal Allocation for Autonomous USVs: Real-Sea Validation",
      "session": "ThBT9",
      "date": "2026-10-29",
      "start": "16:55",
      "end": "17:10",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526140",
          "name": "Yang, Cheng-Teng",
          "affiliation": "National Cheng Kung University"
        },
        {
          "id": "406281",
          "name": "Chen, Yung Yu",
          "affiliation": "National Cheng Kung University"
        },
        {
          "id": "526147",
          "name": "Yu, Wen-Sheng",
          "affiliation": "National Cheng Kung University"
        },
        {
          "id": "526143",
          "name": "Lan, Chun-Han",
          "affiliation": "National Cheng Kung University"
        },
        {
          "id": "526144",
          "name": "Liu, Cheng-Wei",
          "affiliation": "National Cheng Kung University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents a fully integrated guidance and control framework for autonomous unmanned surface vessels (USVs) that achieves high-precision trajectory tracking in real maritime environments. The framework integrates two tightly coupled modules: (1) a Lyapunov-based adaptive RBF nonlinear controller with online parameter estimation, whose stability is rigorously established via Lyapunov stability analysis together with Barbalat's Lemma; and (2) a Lagrange multiplier-based constrained optimal control allocation scheme for rotatable waterjet propulsors, augmented with dedicated RBF networks for accurate actuator modeling. The proposed architecture has been successfully implemented and validated on the Lab611 USV. Extensive real-sea experiments demonstrate exceptional performance, achieving sub-meter tracking accuracy with average tracking errors of 0.26 m over an approximately 2 km ring-port trajectory, 0.14 m on straight-line-plus-curve missions in constrained narrow channels, and 0.42 m on serpentine cruising paths, all while strictly respecting actuator saturation constraints. These results confirm the practical feasibility, robustness, and superior tracking accuracy of the integrated approach in realistic sea states (0-3).",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thbt9_06"
    },
    {
      "id": "ThPo4P.1",
      "paperId": "180",
      "title": "Software-Defined Context-Aware Virtual Fixture for Precise Teleoperation Via Vision-Language Model",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525992",
          "name": "Park, Joseph",
          "affiliation": "Seoul National University"
        },
        {
          "id": "255221",
          "name": "Lee, Haeseong",
          "affiliation": "Seoul National University"
        },
        {
          "id": "101200",
          "name": "Park, Jaeheung",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper proposes a software-defined context-aware Virtual Fixture (CAVF) system that leverages a Vision-Language Model (VLM) to automatically guide robot end-effector motion during teleoperation. The proposed system preserves task-relevant motion while suppressing unnecessary translational and rotational components, enabling haptic-free assistance without handcrafted rules. Experiments in simulation and real-world environments show that CAVF improves task success rates, reduces completion times, and enhances trajectory efficiency compared with conventional teleoperation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_01"
    },
    {
      "id": "ThPo4P.2",
      "paperId": "388",
      "title": "Tokki-Rang: A Book-Attached Nonverbal Reading Companion Robot for Children",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "455367",
          "name": "Hwang, Dong Joon",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "454362",
          "name": "Kim, Hyojin",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "465673",
          "name": "Kim, Saemi",
          "affiliation": "UNIST"
        },
        {
          "id": "525923",
          "name": "Fatimah, Hibah",
          "affiliation": "Ulsan National Institute of Science & Technology"
        },
        {
          "id": "528025",
          "name": "Park, HeeTae",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "525916",
          "name": "Hur, Jaewon",
          "affiliation": "Keimyung University"
        },
        {
          "id": "408947",
          "name": "Hwang, Sun Jun",
          "affiliation": "UNIST"
        },
        {
          "id": "116054",
          "name": "Lee, Hui Sung",
          "affiliation": "UNIST (Ulsan National Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Reading aloud plays an important role in children’s language development and reading engagement. Recent reading companion robots have explored verbal interaction to support children’s reading activities; however, most existing systems are designed as standalone platforms positioned separately from the book, making it difficult to naturally integrate robot interaction into children’s reading space. This study proposes Tokki-Rang, a book-attached reading companion robot designed to provide nonverbal companionship interaction during children’s read-aloud activities. By directly attaching to a book, Tokki-Rang is designed to remain within the child’s reading field of view and support interaction while minimizing additional demands during reading. The robot expresses listening and engagement behaviors through pneumatic soft ear motions and vertical body movements. Interaction scenarios were developed based on children’s interpretations of reading-related situations and robot motions, enabling the robot to convey listening, attention, and engagement through nonverbal embodied behaviors. This work illustrates the potential of book-attached, nonverbal reading companion robots as an interaction design approach for supporting children’s shared reading experiences.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_02"
    },
    {
      "id": "ThPo4P.3",
      "paperId": "500",
      "title": "Imitation-Based Grasp Pose Generation with Human Motion Guidance and Point-Cloud Sensing for Robotic Teleoperation",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528515",
          "name": "Hu, Qizi",
          "affiliation": "The University of Tokyo"
        },
        {
          "id": "173660",
          "name": "Kim, Hyuno",
          "affiliation": "The University of Tokyo"
        },
        {
          "id": "335710",
          "name": "Jia, Ruoyu",
          "affiliation": "The University of Tokyo"
        },
        {
          "id": "148187",
          "name": "Murakami, Kenichi",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "325928",
          "name": "Cao, Yongpeng",
          "affiliation": "The University of Tokyo"
        },
        {
          "id": "109216",
          "name": "Yamakawa, Yuji",
          "affiliation": "The University of Tokyo"
        }
      ],
      "keywords": [
        "Human-Robot Interaction"
      ],
      "abstract": "In this paper, we propose an imitation-based grasp pose generation method that combines human motion guidance with point-cloud sensing of target objects for robotic teleoperation. The operator provides intuitive grasping intent through an approaching vector and hand direction vector extracted from human motion. Based on this guidance, an initial human-guided grasp pose is obtained and subsequently refined using the point cloud acquired by a depth camera mounted on the robot end-effector. Unlike learning-based grasp generation methods, the proposed approach preserves real-time human intent while requiring no training data. Experimental results demonstrate the feasibility of the proposed imitation-based grasping strategy, achieving a grasp success rate of 83.6% across multiple object categories and grasping directions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_03"
    },
    {
      "id": "ThPo4P.4",
      "paperId": "514",
      "title": "Markerless Multi RGB-D Speed and Separation Monitoring with Perception-Aware Dynamic Safety Zones",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528285",
          "name": "Park, Ji Ho",
          "affiliation": "Sungkyunkwan University / Korea Institute of Industrial Technology"
        },
        {
          "id": "222488",
          "name": "Lee, Sangjun",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "319832",
          "name": "Kuc, Tae-Yong",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "138028",
          "name": "Lee, Kwang Hee",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "537995",
          "name": "Kim, Hyunsu",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "538914",
          "name": "Cho, Hyeong Rae",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Speed and separation monitoring reduces robot speed before hazardous human-robot contact can occur, through a protective separation distance that combines human motion, robot reaction and stopping behavior, sensing uncertainty, and geometric margins. In many vision based deployments the human approach speed and the sensing margin stay fixed at conservative values, so the monitored boundary cannot follow the direction of human motion or the quality of the perception stream. This paper presents a markerless multi RGB-D monitor that updates these two perception dependent terms online from a fused skeleton. Human keypoint motion is projected toward the robot link geometry to obtain a geometry-aware approach speed, and a cell specific RGB-D calibration residual is added to the sensing margin while the standard additive form of the separation distance is retained. A recorded UR5e workcell evaluation compares the monitor against a fixed-speed, link aware baseline under identical geometry. The proposed monitor lowers the separation distance and the robot interruption while observed robot link clearance is maintained throughout the replay. Markerless perception is positioned as an online input source for dynamic safety boundaries rather than as a safety certified controller.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_04"
    },
    {
      "id": "ThPo4P.5",
      "paperId": "517",
      "title": "Safety-Critical Leader-Follower Teleoperation of Heterogeneous Robot Manipulators Via Operational Space Control Barrier Functions",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528432",
          "name": "Kang, JuHwan",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "528530",
          "name": "Lee, Jiyun",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "528534",
          "name": "Jin, Bora",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "528542",
          "name": "Jin, Eunseo",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "405235",
          "name": "Park, Bum Yong",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Industrial Applications of Control",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a leader-follower teleoperation framework with whole-body collision avoidance for heterogeneous robot manipulators. The proposed system transfers the end-effector motion of an Open-Manipulator-X leader to a Franka Emika Panda follower while enforcing whole-body collision avoidance through an operational space control barrier function (OSCBF)-based safety filter. The follower first computes a nominal operational space torque command for tracking the desired end-effector pose and then solves a quadratic program that minimally modifies the command to satisfy safety constraints, with emphasis on maintaining separation between robot collision spheres and obstacles. To evaluate the safety behavior under time-varying constraints, a virtual spherical obstacle is generated in the follower workspace and moved along the lateral axis. The resulting controller enables intuitive teleoperation while reacting to both static and moving obstacle constraints.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_05"
    },
    {
      "id": "ThPo4P.6",
      "paperId": "521",
      "title": "Validation of the Gaze-Tracking Performance of a Driver Behavior Simulation Dummy Using an Eye Tracker and Comparative Analysis with Human Participants",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528587",
          "name": "Yae, Jinhae",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "528596",
          "name": "Oh, Young-dal",
          "affiliation": "KATECH"
        },
        {
          "id": "528043",
          "name": "Kim, Moon-Sik",
          "affiliation": "Kongju National University"
        },
        {
          "id": "117562",
          "name": "Park, Sunhong",
          "affiliation": "Korea Automotive Technology Institute"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Autonomous Vehicle Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "As autonomous-driving regulations, such as UN Regulation No. 171 and Euro NCAP, become increasingly stringent, robust verification technologies for high-reliability Driver Monitoring System (DMS) are critical. However, conventional evaluations relying on human participants are limited in generating repeatable reference data due to significant gaze dispersion and ocular fatigue. To address these limitations, this study quantitatively verified the gaze reproduction accuracy of an in-house developed driver behavior simulation dummy through a one-to-one comparison with human subjects. Experiments were conducted in a driving simulator under two Euro NCAP protocol-based behavior patterns: owl-like and lizard-like. The dummy system demonstrated lower standard deviations than human participants, proving high mechanical repeatability. Although noticeable gaze errors were observed in the peripheral regions of the lizard-like behavior (Yaw -20° and +30°) due to eyeball surface material differences and initial geometric alignment constraints, stable tracking performance was validated within the primary effective gaze region. These findings confirm the dummy’s validity as a high-reliability evaluation alternative. Future work will focus on minimizing errors by improving artificial-eyeball materials and enhancing alignment precision.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_06"
    },
    {
      "id": "ThPo4P.7",
      "paperId": "599",
      "title": "Motor-Side Friction Observer-Based Hand Guiding with Joint Torque Measurements",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "427928",
          "name": "Lee, Sanghoon",
          "affiliation": "KAIST"
        },
        {
          "id": "528660",
          "name": "Jeong, Jaehun",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "528736",
          "name": "Shin, Seungmin",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "149446",
          "name": "Kim, Min Jun",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robotic Applications",
        "Control Theory and Applications"
      ],
      "abstract": "Intuitive hand guiding is a fundamental feature in physical human-robot interaction, enabling operators to teach trajectories without complex programming. However, uncompensated motor-side friction substantially degrades operational transparency. While a motor-side friction observer can effectively reduce interaction resistance, its high sensitivity makes the hand-guiding loop vulnerable to various sources of uncertainty, such as dynamic modeling errors and the inherent bias and thermal drift of the joint torque sensor (JTS). When the manipulator is released and expected to remain stationary, these residual uncertainties are misinterpreted as a persistent external input, leading to unintended continuous motion, or drift. In this paper, we present a hand-guiding framework that applies a motor-side L1 Adaptive Friction Observer (L1AFO) integrated with a dual-stage stabilization strategy. By incorporating a linearly interpolated dead-zone and an online moving-average residual compensation mechanism during stationary phases, the proposed method systematically suppresses the residual uncertainty that induces the drift. Experimental validations on a multidegree-of-freedom collaborative robot demonstrate that the proposed framework reduces the average interaction force by 44–64% during hand guiding while suppressing unintended drift throughout a 10-minute stationary evaluation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_07"
    },
    {
      "id": "ThPo4P.8",
      "paperId": "621",
      "title": "Concept-JEPA: Learning Semantic Concept Dynamics for Efficient World Models",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "484100",
          "name": "Ahn, Dasom",
          "affiliation": "Keimyung University"
        },
        {
          "id": "484065",
          "name": "Ko, Byoung Chul",
          "affiliation": "Keimyung University"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "Recent latent world models such as V-JEPA learn predictive representations by forecasting future latent states. Although such latent representations are effective for visual prediction, they are difficult to interpret and often contain redundant information irrelevant to downstream robot planning. This paper proposes Concept-JEPA, an idea-level framework that replaces latent-space prediction with semantic concept dynamics. The proposed method extracts latent tokens using a frozen V-JEPA encoder, projects them into automatically generated semantic concepts using vision-language supervision, and selects task-relevant concepts through an adaptive Top-K mechanism. A lightweight concept dynamics model predicts future semantic concepts, which are then used for robot action prediction. By modeling semantic state transitions rather than full latent vectors, Concept-JEPA provides an efficient and explainable direction for future robot world models.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_08"
    },
    {
      "id": "ThPo4P.9",
      "paperId": "623",
      "title": "Design of Multi-Directional Soft Pneumatic Actuator for Fingertip Normal-Shear Haptic Feedback",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "531198",
          "name": "Kim, Han Soo",
          "affiliation": "Korea University"
        },
        {
          "id": "298224",
          "name": "Min, Jiyong",
          "affiliation": "Korea University"
        },
        {
          "id": "531331",
          "name": "Shin, Sangwoo",
          "affiliation": "Korea University"
        },
        {
          "id": "146365",
          "name": "Cha, Youngsu",
          "affiliation": "Korea University"
        }
      ],
      "keywords": [
        "Human-Robot Interaction"
      ],
      "abstract": "Haptic feedback is essential for achieving immersive and precise interactions. Specifically, multi-directional shear forces applied to the fingertip play a crucial role in the perception of object slippage, surface textures, and directional movements. Herein, we propose a 2.8 g ultra-lightweight wearable haptic multi-directional soft pneumatic device, generating both normal and multi-directional shear force. The proposed system integrates a forearm-worn origami pump and valve module to achieve independent control of three pouches using only two origami pumps and a single solenoid valve through a pneumatic method. With this designed device, the performance of each pouch was evaluated to show that it can deliver shear forces in eight directions as well as normal. This novel haptic device demonstrates the potential to provide various tactile feedback to the fingertip using the independent pneumatic method, thereby enabling lightweight and wireless devices.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_09"
    },
    {
      "id": "ThPo4P.10",
      "paperId": "672",
      "title": "Single-Master Control Scheme for Dual-Arm Teleoperation to Mitigate Operator Cognitive Workload and Task Complexity",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "273535",
          "name": "Choi, Iksu",
          "affiliation": "Sungkyunkwan University, KITECH"
        },
        {
          "id": "106009",
          "name": "Yang, Gi-Hun",
          "affiliation": "KITECH"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robotic Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "This study proposes an intuitive single-master control framework for dual-arm teleoperation to alleviate operator cognitive workload and simplify task complexity in bimanual manipulation. The proposed scheme features two coordinated kinematic mapping modes: a synchronized translation mode for the stable co-transportation of heavy payloads, and a symmetric mirror mode to facilitate intuitive end-effector alignment during dual-arm grasping. To prevent operational drift and enhance positioning accuracy, active virtual fixtures are integrated into the bilateral control loop to provide reactive haptic guidance. The effectiveness of the proposed framework was evaluated through a user study involving nine participants categorized by proficiency levels (experts, intermediates, and novices) performing a bimanual pipe transportation task. Experimental results demonstrated that the proposed haptic-assisted scheme achieved an average trial-wise task time reduction of 25.1% and an average subjective workload reduction of 45.1%, validating its practical utility in reducing bimanual coordination fatigue.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_10"
    },
    {
      "id": "ThPo4P.11",
      "paperId": "14",
      "title": "A Conceptual HSI Design Framework for Enhancing Operator Situation Awareness in Highly Automated Multi-Module SMRs",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "522603",
          "name": "Koo, Bongwan",
          "affiliation": "Korea Hydro & Nuclear Power (KHNP), Central Research Institute"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "As the nuclear industry shifts toward Small Modular Reactors (SMRs), the adoption of multi-module operations and high levels of automation has become essential to ensure economic feasibility. However, increased automation can lead to the “Out-of-the-Loop (OOTL)” phenomenon. This phenomenon degrades operators’ Situation Awareness (SA) of plant system states during automated operations and hinders effective operator responses to automation failures. In multi-module SMRs, this issue is further exacerbated by the need to monitor and manage multiple units simultaneously, leading to dispersed attention and reduced system understanding. To address these challenges, this study proposes a conceptual HSI design framework consisting of three strategies: integrated overview display, system-level information integration and automation transparency with mode visualization. The integrated overview display supports attention allocation across multiple modules; system-level information integration helps operators understand interactions among modules, shared systems, and plant-level operations; and automation transparency with mode visualization supports operators in understanding automation status, rationale, and expected behavior. These strategies are derived from prior studies on OOTL, SA and regulatory guidance for advanced reactor HSI design. The proposed framework is expected to help operators maintain SA and remain in the control loop during automated operation in multi-module SMR.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_11"
    },
    {
      "id": "ThPo4P.12",
      "paperId": "49",
      "title": "Active Disturbance Rejection Control of a 6-DOF Robot Manipulator: Tuning Strategy and Comparative Evaluation",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "524810",
          "name": "Gwon, Yeonghun",
          "affiliation": "WIM Inc"
        },
        {
          "id": "524811",
          "name": "Kim, Hwarang",
          "affiliation": "WIM Inc"
        },
        {
          "id": "524812",
          "name": "Kim, Dongwook",
          "affiliation": "WIM Inc"
        },
        {
          "id": "465629",
          "name": "You, Sesun",
          "affiliation": "Incheon National University"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "We present an incremental joint-wise tuning protocol for Active Disturbance Rejection Control (ADRC) on a 6-DOF Neuromeka Indy7 manipulator, releasing joints one at a time from the end-link toward the base so that inter-link coupling is absorbed stage by stage rather than as a single multi-joint search. Against a strong PD + feed-forward (FF) baseline that is given the full nominal robot model M(q), C(q,˙q), G(q) and a friction model, and that shares the identical PD feedback as ADRC, ADRC outperforms the baseline in both scenarios using only one gain bn per joint as model knowledge: by 12 % RMS in the nominal scenario, and by 76 % RMS when a 2.5 kg payload — unknown to the nominal model — is rigidly attached to the end-effector, at essentially the same control effort.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_12"
    },
    {
      "id": "ThPo4P.13",
      "paperId": "181",
      "title": "A Simulation Testbed for Piezo-Actuated Nanopositioning Control Systems",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "130232",
          "name": "Kang, Chul-Goo",
          "affiliation": "Konkuk University"
        },
        {
          "id": "461907",
          "name": "Jo, Ahjin",
          "affiliation": "Park SYSTEMS"
        },
        {
          "id": "461903",
          "name": "Ahn, Byoung-Woon",
          "affiliation": "Parksystems Corp"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper presents the development and verification of a simulation testbed for a piezo-actuated nanopositioning control system, specifically tailored for the Z scanner servo system of an atomic force microscope (AFM). Nanopositioning systems driven by piezo actuators are essential in high-precision instruments to achieve sub-nanometer resolution. However, evaluating control performance and implementing advanced control algorithms directly on hardware can be time-consuming and carries the risk of device damage. To address this, we construct a Simulink-based testbed incorporating a discretized proportional-integral (PI) controller, high-voltage amplifier dynamics, stacked piezo actuator characteristics with flexure structures, and cantilever sensor dynamics. The closed-loop frequency response and step response are evaluated, and the testbed's ability to mirror physical conditions is validated through topography-tracking scenarios under white Gaussian noise. Simulation results demonstrate that the proposed testbed effectively captures tracking speed and noise amplification when adjusting controller gains. This virtual framework provides a valuable and safe platform for control engineers to optimize nanopositioning control systems and evaluate newly designed control logic.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_13"
    },
    {
      "id": "ThPo4P.14",
      "paperId": "218",
      "title": "Half-Cycle Sinusoidal Amplitude Matching for Input-Gain Calibration in Active Disturbance Rejection Control for PMSM Position Control",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "465513",
          "name": "Yim, Jaeyun",
          "affiliation": "Hanwha Aerospace"
        },
        {
          "id": "465629",
          "name": "You, Sesun",
          "affiliation": "Incheon National University"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes an automatic calibration method for the input gain of active disturbance rejection control (ADRC) applied to permanent magnet synchronous motor (PMSM) position control. In ADRC, the input gain depends on mechanical parameters such as rotor inertia and flux linkage, which are difficult to identify precisely and vary with operating conditions. A gain mismatch causes the closed-loop bandwidth to deviate from the desired value, resulting in degraded tracking performance. The proposed method applies a sinusoidal calibration signal and constructs a reference model using a second-order low-pass filter whose bandwidth matches the ADRC control bandwidth. Rather than relying on instantaneous tracking error, the method compares the steady-state sinusoidal amplitudes of the closed-loop output and the reference model output to identify the gain mismatch. The amplitude comparison is performed by integrating the absolute value of each signal over one half-cycle using resettable integrators triggered by zero-crossing instants, yielding a phase-independent amplitude measure. A Lyapunov-based convergence analysis shows that the gain estimate converges to the true value in finite time under ideal conditions. The effectiveness of the proposed method is verified through simulations in MATLAB/Simulink.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_14"
    },
    {
      "id": "ThPo4P.15",
      "paperId": "255",
      "title": "PSO-Based FRF Parameter Identification of an Industrial DD Rotary PMSM Considering Position-Control-Period Delay",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525945",
          "name": "Oh, YoonTaek",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "525956",
          "name": "Jung, Doo-Hee",
          "affiliation": "Tech University of Korea"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "Direct-drive rotary permanent magnet synchronous motors are widely used in industrial motion systems requiring high-speed and high-precision position control. For such systems, an accurate plant model is important for controller design, bandwidth selection, stability analysis, and performance prediction. This paper presents a frequency- response-function-based parameter identification procedure for an industrial DD rotary PMSM under closed-loop position control. A position-command exponential chirp experiment is performed, and the closed-loop FRF is estimated from the measured position response. The open-loop and plant FRFs are then sequentially reconstructed using the known controller and feedback model, and particle swarm optimization is applied to identify the effective mechanical parameters. A no- delay model and a position-control-period delay model are compared to analyze the influence of the delay term on FRF fitting. Experimental results show that the delay-included PSO model reduces the phase RMSEs of the closed-loop, open- loop, and plant FRFs by approximately 34.6%, 35.3%, and 35.4%, respectively, compared with the no-delay PSO model under the same magnitude-and-phase objective function. The magnitude RMSEs of all evaluated FRFs remain close to approximately 2.1 dB",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_15"
    },
    {
      "id": "ThPo4P.16",
      "paperId": "304",
      "title": "Adaptive Internal Model Control Design for Uncertain First Order Systems with High Speed Actuator",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "411178",
          "name": "Na, Gyujin",
          "affiliation": "Agency for Defense Development"
        },
        {
          "id": "461952",
          "name": "Kim, Jung Hoe",
          "affiliation": "ADD"
        }
      ],
      "keywords": [
        "Industrial Applications of Control"
      ],
      "abstract": "This paper proposes an adaptive internal model control design method for uncertain linear time invariant first order process with uncertain high speed actuator. Adaptive rules for the targeted systems are derived and the process and actuator nominal models are updated through adaptive gains. To acquire the control parameters meeting requirements, the performance index based parameter selection guideline is proposed. The effectiveness of the proposed method is evaluated through the gas turbine systems with uncertain parameters. The simulation results include the comparison with the conventional internal model control method without the model update by adaptive rule, which show that the proposed method has fast model recovery performance with notable disturbance rejection capability.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_16"
    },
    {
      "id": "ThPo4P.17",
      "paperId": "319",
      "title": "TUK PCA: A Multi-Stage SMT Line Dataset for Printed Circuit Assembly Manufacturing",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527338",
          "name": "Kim, Jiwoong",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "527344",
          "name": "Bae, So young",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "527340",
          "name": "Bae, You Suk",
          "affiliation": "Tech University of Korea"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Information and Networking",
        "Sensors and Signal Processing"
      ],
      "abstract": "Printed Circuit Assemblies (PCA) are manufactured through a sequence of processes in a Surface Mount Technology (SMT) line, where electronic components are mounted and soldered onto Printed Circuit Boards (PCB). Product quality is typically assessed at the final stage of the line, primarily through automated optical inspection (AOI). Consequently, most existing public datasets for PCA defect analysis focus on AOI image data. Although image-centric datasets are effective for post-process defect detection, they provide limited insight into how manufacturing processes affect defects, which in turn hinders research on early-stage defect prediction and process-aware quality analysis. To fill this gap, we introduce TUK PCA, a multi-modal dataset collected from multiple stages of an SMT line. The dataset integrates manufacturing process logs from mounting equipment, thermal data from a reflow oven, and component-level region-of-interest (ROI) images and inspection results from AOI systems. Because these sources are produced by heterogeneous acquisition mechanisms, the dataset adopts a time-based synchronization strategy to align records across stages under practical constraints. We provide a detailed description of the data collection pipeline, dataset composition, and synchronization methodology, together with an analysis of the resulting dataset. This dataset aims to support research on process-aware defect prediction, multi-modal learning, and explainable quality analysis in PCA manufacturing.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_17"
    },
    {
      "id": "ThPo4P.18",
      "paperId": "414",
      "title": "FROG: A Robot Software Platform with a Unified Cycle-Task Execution Model",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527106",
          "name": "Hwang, Seungyeon",
          "affiliation": "Samsung Heavy Industries Co., Ltd"
        },
        {
          "id": "408530",
          "name": "Jeon, Dohyung",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "527120",
          "name": "Lee, Mulim",
          "affiliation": "SAMSUNG HEAVY INDUSTRIES Co., Ltd"
        },
        {
          "id": "408272",
          "name": "Choi, Doojin",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "362046",
          "name": "Kim, Hyungjin",
          "affiliation": "Samsung Heavy Industries"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Robotic Applications",
        "Process Control Systems"
      ],
      "abstract": "Industrial robots increasingly operate as components of larger workflows rather than as isolated machines, so their software must sustain continuous control while also serving ad-hoc requests from external systems. This paper presents FROG, a robot software platform built on a unified Cycle–Task execution model. An application is composed of Workers, each pairing one periodic Cycle with multiple request-driven Tasks. A Worker is also the unit of temporal isolation: the runtime binds one periodic and one request-driven context to every Worker, so continuous control and request handling never share a context, with no executor or thread-pool configuration by the developer. Three mechanisms distinguish FROG from comparable robot middleware: a per-Worker overrun policy selectable at run time, a shared-state store with lock-free reads and per-key atomic publication, and built-in timing telemetry queryable from a deployed robot. We validate FROG on a quadruped-based mobile manipulator performing welding, and characterize it: the mean release interval matches its nominal period to within 20 ns up to 1 kHz, a queued Task costs 2.2 µs above the protocol floor, a 1 kHz Cycle holds its rate under sustained load, and a Worker costs 37 KiB and 0.05 % of a core.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_18"
    },
    {
      "id": "ThPo4P.19",
      "paperId": "473",
      "title": "Optimization of Vibration Intensity for a Powder Dispensing System",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "471413",
          "name": "Jeon, HyeonJi",
          "affiliation": "Hanyang University"
        },
        {
          "id": "524557",
          "name": "Yu, Dongyeop",
          "affiliation": "Hanyang University"
        },
        {
          "id": "194767",
          "name": "Yoo, Sungkeun",
          "affiliation": "Keimyung University"
        },
        {
          "id": "171061",
          "name": "Kim, Taegyun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Process Control Systems",
        "Control Theory and Applications"
      ],
      "abstract": "The demand for precision dispensing automation of fine powders, which are widely utilized across various industries, is steadily increasing. However, the non-linear flow behavior induced by the high angle of repose (AoR) and cohesive forces of fine powders degrades control accuracy, hindering dispensing resolution. To address this challenge, this study proposes a vibration-based precision dispensing system and optimizes its operational vibration conditions. Using a robot arm integrated with a vibration module, dispensing experiments were conducted with respect to distance and PWM control signals. A multi-objective cost function was formulated to quantitatively evaluate linearity, productivity, and stability. The experimental results indicated that increasing vibration intensity collapsed the physical AoR, thereby enhancing fluidization; however, an excessive control signal conversely deteriorated flowability due to inter particle interference and bed wave deformation. Consequently, the optimal vibration condition that maximizes both system linearity and stability was derived, which will be utilized to establish precise powder dispensing control mechanisms in the future.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_19"
    },
    {
      "id": "ThPo4P.20",
      "paperId": "499",
      "title": "Model-Based Diagnosis of Inter-Turn Short-Circuit Faults for Switched Reluctance Motors Using an Extended Kalman Filter",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528470",
          "name": "Kim, Juhwan",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "385232",
          "name": "Ban, Jaepil",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Theory and Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper proposes an online inter-turn short-circuit (ITSC) fault diagnosis strategy for switched reluctance motors (SRMs) using an extended Kalman filter (EKF). An algebraically reduced dynamic model of SRMs with ITSC faults is established to resolve the mathematical singularities and numerical divergence issues inherent in conventional SRM models with ITSC faults. Integrated with the proposed model, an EKF-based ITSC fault diagnosis method is proposed to estimate the fault current using only phase current measurements. Simulation results verify that the proposed method successfully detects even incipient faults with superior sensitivity.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_20"
    },
    {
      "id": "ThPo4P.21",
      "paperId": "527",
      "title": "A Low-Cost, Compact, and Modular Robotic System for Automated Bottle Packing",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "338899",
          "name": "Nozad Heravi, Farshad",
          "affiliation": "Istituto Italiano Di Tecnologia"
        },
        {
          "id": "305467",
          "name": "Lahoud, Marcel",
          "affiliation": "Italian Institute of Technology"
        },
        {
          "id": "302442",
          "name": "Marchello, Gabriele",
          "affiliation": "Istituto Italiano Di Tecnologia"
        },
        {
          "id": "528541",
          "name": "D'acierno, Lorenzo",
          "affiliation": "Istituto Italiano Di Tecnologia"
        },
        {
          "id": "128184",
          "name": "Cannella, Ferdinando",
          "affiliation": "Istituto Italiano Di Tecnologia"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents a compact, low-cost robotic workcell for autonomous bottle packing, featuring a dual-mode end-effector (vacuum suction and parallel-jaw grasping), a YOLOv8 planar-homography localisation pipeline, and a ROS2 Behaviour Tree coordinator. Validated at the WRS2025 Manufacturing Challenge (Aichi, Japan), the system achieved 100% pick success in Run 2, a mean cycle time of 20.67 s/bottle, and hardware cost below 500 EUR excluding the robot arm.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_21"
    },
    {
      "id": "ThPo4P.22",
      "paperId": "565",
      "title": "Mesh-Difference-Based Path Generation and Motion Planning for Robotic Cutting Tasks",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528572",
          "name": "Bhang, Minjun",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "226012",
          "name": "Lee, Jinhwi",
          "affiliation": "Tech University of Korea"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Process Control Systems",
        "Robotic Applications"
      ],
      "abstract": "RGB-D-based vision models have been widely used as general-purpose perception methods in robotic manipulation tasks. However, in certain task environments, visual task recognition can be limited by strong illumination, dust, fumes, and other adverse conditions. This paper proposes a mesh-difference-based cutting path generation and motion planning method for robotic cutting tasks that does not rely on vision-based perception. The proposed framework extracts a cutting surface from the geometric differences between pre-cut and post-cut mesh models registered in the same coordinate system. The reference cutting path is then generated based on the robot-facing outer boundary of the extracted cutting-surface mesh. Subsequently, an executable TCP path is constructed from the reference path, enabling the robot end-effector to follow the target path. To execute the generated path, target poses are constructed by aligning the cutting-tool axis parallel to the approach direction, and cutting motion planning for the robotic manipulator is performed in the Isaac Sim environment using cuRobo-based motion generation and robot kinematics computation methods. In the simulation, the shape approximation performance of the generated cutting trajectories and the TCP position-tracking performance are evaluated using mesh models with various geometries. The results demonstrate that a reference cutting path can be generated from the geometric differences between pre-cut and post-cut meshes and converted into a TCP position path executable by the simulated robot.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_22"
    },
    {
      "id": "ThPo4P.23",
      "paperId": "629",
      "title": "Thruster-Assisted Posture Stabilization of Floating Offshore Wind Turbines",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "531798",
          "name": "Li, Shuzhen",
          "affiliation": "Qingdao University"
        },
        {
          "id": "130228",
          "name": "Hong, Keum-Shik",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Theory and Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "This paper summarizes a thruster-assisted stabilization method for floating offshore wind turbines under wind and wave disturbances. A four-degree-of-freedom nonlinear model describes platform heave, roll, pitch, and tower deflection, while a reduced three-degree-of-freedom model is used for controller design. A super-twisting sliding-mode controller is employed to regulate heave and pitch motions. Simulations show faster response attenuation and improved vibration suppression over proportional–integral control, particularly under an extreme sea state.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_23"
    },
    {
      "id": "ThPo4P.24",
      "paperId": "646",
      "title": "Cluster-Based Battery-Constrained Multi-Drone Task Scheduling",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "411768",
          "name": "Lee, Jusang",
          "affiliation": "UNIST"
        },
        {
          "id": "305540",
          "name": "Kwon, Cheolhyeon",
          "affiliation": "Ulsan National Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper addresses the multi-drone task scheduling problem in warehouse environments under a battery constraint. The problem is NP-hard because the limited battery couples task assignment, task ordering, and depot selection into a single decision. As a result, a feasibility check is required at every scheduling step, and the search space explodes as the number of tasks grows. To address this challenge, this paper proposes a cluster-based algorithm that groups connected tasks into cluster, each corresponding to exactly one battery trip. When a cluster is generated, the farthest depot is selected so that the cluster stays feasible under any depot. The algorithm consists of i) cluster generation, ii) greedy scheduling, and iii) depot optimization. We demonstrate the effectiveness of the proposed algorithm through a warehouse simulation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_24"
    },
    {
      "id": "ThPo4P.25",
      "paperId": "668",
      "title": "Simultaneous Control Co-Design of Battery Energy Capacity and Energy Management for an Extended-Range Electric Vehicle",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532244",
          "name": "Hyun, Myunghan",
          "affiliation": "Changwon National University"
        },
        {
          "id": "528322",
          "name": "Gim, Juhui",
          "affiliation": "Changwon National University"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "Extended-range electric vehicles (EREVs) require an efficient energy management strategy because the battery, electric motors, and engine-generator system are tightly coupled. Conventional optimization-based approaches generally optimize only the control strategy while assuming a fixed battery energy capacity, which may limit the achievable system efficiency. This paper proposes a simultaneous control co-design framework that jointly optimizes the battery energy capacity and energy management strategy. The optimization problem is formulated using a direct transcription approach, where the system states, control inputs, and battery energy capacity are optimized within a unified nonlinear programming framework. Simulation results show that the proposed framework achieves efficient power distribution while maintaining vehicle speed tracking performance and battery operating constraints. The proposed approach provides an effective framework for integrating battery sizing and energy management optimization in EREVs.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_25"
    },
    {
      "id": "ThPo4P.26",
      "paperId": "676",
      "title": "Robust Control of a Height-Varying Flexible Structure in Additive Manufacturing",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532027",
          "name": "Kim, Hyeong-Keun",
          "affiliation": "KAIST"
        },
        {
          "id": "532284",
          "name": "Lee, Suhan",
          "affiliation": "KAIST"
        },
        {
          "id": "532267",
          "name": "Yoon, Yong-Jin",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Process Control Systems",
        "Control Theory and Applications"
      ],
      "abstract": "Flexible in-process structures in additive manufacturing exhibit time-varying dynamics as their structural properties change with increasing build height. Such variations in dynamic characteristics can be represented as a linear parameter-varying (LPV) system using build height as a scheduling variable. However, independently bounding scheduling parameters that are physically coupled through structural height change can introduce unattainable parameter combinations and increase conservatism in robust controller synthesis. This work compares an independent box representation with a proposed parameter-varying representation that preserves physical dependence among the scheduling parameters. Robust state-feedback controllers are synthesized under the same common quadratic Lyapunov framework. Numerical results show that the proposed representation provides a larger feasible decay-rate bound and improved closed-loop stability along the parameter-varying trajectory, indicating reduced conservatism in robust control of growing structures during additive manufacturing.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_26"
    },
    {
      "id": "ThPo4P.27",
      "paperId": "98",
      "title": "A Study on Reducing the Size of Data to Be Transmitted in Double Random Phase Encryption",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525521",
          "name": "Kimura, Nozomi",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "407498",
          "name": "Cho, Myungjin",
          "affiliation": "Hankyong National University"
        },
        {
          "id": "407488",
          "name": "Lee, Min-Chul",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Information and Networking"
      ],
      "abstract": "In recent information-driven society, protecting image data from eavesdropping and tampering is critical. Optical encryption, specifically Double Random Phase Encryption (DRPE), leverages the physical properties of light and the Fourier transform to secure data. However, DRPE typically suffers from high communication overhead because the security keys must be the same size as the original image. This paper proposes a method to significantly reduce data size by using a reduced key, only one-tenth of the original pixel count. By tiling this reduced key to match the original dimensions, we successfully decrease the data size by approximately 98% without compromising the quality of the decrypted image. To address security vulnerabilities—specifically periodicity introduced by tiling and the predictability of simple random generation—we integrate chaos theory via a two-dimensional logistic map with DRPE. We apply a diffusion process to the tiled phase mask using chaos parameters derived from the reduced key. This process randomly rearranges pixels, eliminating periodicity and enhancing key sensitivity. Ultimately, this proposed method establishes a robust encryption method that improves security and complexity while achieving a massive reduction in communication and management costs.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_27"
    },
    {
      "id": "ThPo4P.28",
      "paperId": "348",
      "title": "Nash Product Based MILP Approach for Fair Task Scheduling",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527144",
          "name": "Wang, Xudong",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "166714",
          "name": "Zhai, Guisheng",
          "affiliation": "Shibaura Institute of Techbology"
        }
      ],
      "keywords": [
        "Information and Networking",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper studies a time-indexed task scheduling problem with worker-dependent processing times and subjective task utilities. Fairness is defined specifically as the balance of accumulated subjective utility among workers and does not include workload, effort, or fatigue. A Nash product based objective is approximated by a piecewise-linear representation of logarithmic utility to obtain a mixed-integer linear programming (MILP) formulation. To make the temporal role of scheduling explicit, precedence constraints and the maximum completion time C_{max} are incorporated. Experiments compare total utility, Nash welfare, and lexicographic max-min objectives, and evaluate the effects of precedence and completion-time weighting. Additional tests on four problem sizes show increasing computation time but relative optimality gaps below 10^{-4} in all tested instances. A breakpoint sensitivity test also confirms that a finer approximation substantially reduces the logarithmic approximation error.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_28"
    },
    {
      "id": "ThPo4P.29",
      "paperId": "494",
      "title": "A Measurement Study of WiFi HaLow (IEEE 802.11ah) Links in a Shipyard Environment Toward Mobile Robot Communication",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528230",
          "name": "Lee, SeungHo",
          "affiliation": "Pusan National University"
        },
        {
          "id": "528499",
          "name": "Kim, SungHun",
          "affiliation": "Pusan National University"
        },
        {
          "id": "528502",
          "name": "Byeon, Seunggyu",
          "affiliation": "Korea Maritime & Ocean University"
        },
        {
          "id": "408272",
          "name": "Choi, Doojin",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "362046",
          "name": "Kim, Hyungjin",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "408273",
          "name": "Kim, Yonguk",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "408114",
          "name": "Lee, Jaemin",
          "affiliation": "Samsung Heavy Industries"
        },
        {
          "id": "528503",
          "name": "Kim, Jongdeok",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Information and Networking",
        "Sensors and Signal Processing"
      ],
      "abstract": "Enabling wireless communication for mobile robots in shipyards requires first understanding the wireless-link characteristics in environments dense with steel structures. This paper presents an on-site measurement study of sub-GHz WiFi HaLow (IEEE 802.11ah) links in two assembly shops of a commercial shipyard. Using a purpose-built HaLow measurement platform, we collected link quality—in terms of signal strength, throughput, and loss rate—versus distance under line-of-sight conditions and as a function of structural factors under steel-bulkhead conditions. We found that, under line-of-sight conditions, distance was the primary factor in link quality, whereas under steel-bulkhead conditions the presence or absence of a steel structure able to reflect the signal was associated with substantial differences in link quality even at similar received signal strength. At a position lacking a reflecting surface, where the link was formed essentially through steel penetration alone, the UDP loss rate rose to 7.82%, markedly higher than at adjacent positions of similar signal strength, while the auto-selected bandwidth stayed low. These observations indicate that link quality inside a shipyard can be associated not only with distance but also with the reflection/penetration geometry of steel structures, pointing to the need for infrastructure placement that exploits reflected paths and for link-adaptive communication.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_29"
    },
    {
      "id": "ThPo4P.30",
      "paperId": "650",
      "title": "Graph Coloring in Matrix-Weighted Graph",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532127",
          "name": "Yang, Ji-Hyeok",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        },
        {
          "id": "532125",
          "name": "Cho, Min-Guk",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        },
        {
          "id": "112126",
          "name": "Ahn, Hyo-Sung",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        }
      ],
      "keywords": [
        "Information and Networking",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Classical graph coloring models a conflict between two vertices by a fixed binary edge. This representation can be overly conservative when the actual conflict depends on multidimensional system states, interaction directions, and admissible tolerances. This paper introduces matrix-weighted graph coloring (MWGC), in which an edge-dependent positive semidefinite matrix and a pair of vertex states determine whether a potential edge becomes an active conflict. An MWGC-proper coloring is defined through a quadratic matrix detector. The MWGC chromatic number is shown to be equal to the classical chromatic number of the induced active conflict graph. The framework is then applied to a server assignment problem, where vertices represent computational tasks and colors represent servers. The equivalence result shows that the minimum number of required servers is determined by the chromatic number of the induced active conflict graph, allowing task pairs with admissible state-dependent interactions to share a server.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_30"
    },
    {
      "id": "ThPo4P.31",
      "paperId": "52",
      "title": "AIS-Based Vessel Tracking Filter Design for Remote Situational Awareness in Coastal Environments",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "349763",
          "name": "Heo, Suhyeon",
          "affiliation": "Keimyung University"
        },
        {
          "id": "171826",
          "name": "Park, Jeonghong",
          "affiliation": "KRISO"
        },
        {
          "id": "319846",
          "name": "Kang, Minju",
          "affiliation": "Korea Research Institute of Ships & Ocean Engineering"
        },
        {
          "id": "223911",
          "name": "Hong, Seonghun",
          "affiliation": "Keimyung University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper presents an automatic identification system (AIS)-based vessel tracking framework designed to enhance shore-based remote situational awareness at remote operation centers in coastal environments. As maritime autonomous surface ships are increasingly expected to operate alongside conventionally crewed vessels, continuous and reliable vessel state estimation from a shore-based perspective becomes a critical operational requirement. AIS provides a scalable and widely deployed data source for this purpose; however, its practical utility is constrained by nonuniform transmission intervals and frequent signal loss, which pose significant challenges for maintaining track continuity. The proposed framework addresses these limitations through a filtering-based state estimation scheme that preserves track continuity beyond what can be achieved using direct AIS observations alone. Experimental results based on real-world AIS datasets collected from a representative coastal region demonstrate the practical feasibility of the proposed method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_31"
    },
    {
      "id": "ThPo4P.32",
      "paperId": "64",
      "title": "Motion-Aware LiDAR Adaptation with an Inflated Unsafe Set for Multi-Agent Safe Navigation",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "408932",
          "name": "Winata, I Made Putra Arya",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "520561",
          "name": "Anwari, Anggra",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "159267",
          "name": "Oh, Junghyun",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control"
      ],
      "abstract": "Safe navigation in multi-agent systems requires each agent to reach its goal while avoiding collisions with other agents and moving obstacles. Graph-CBF-based methods improve scalable safe control by combining control barrier functions with graph-based distributed policies, but they commonly construct obstacle nodes from immediate LiDAR observations. This representation can be insufficient in dynamic environments because current hit points alone do not indicate whether obstacles are approaching the agent. To address this limitation, this paper proposes a motion-aware LiDAR adapter based on an inflated unsafe invariant set for multi-agent safe navigation. The adapter uses recent LiDAR hit-point history, together with the agent and goal positions, to estimate ray-wise motion risk and bounded range inflation. The inflated hit points are then used as adapted obstacle nodes before graph construction, while the pretrained GCBF+ policy remains frozen. The proposed method is evaluated in moving-obstacle scenarios against nominal, centralized CBF, decentralized CBF, and graph-CBF baselines under Single Integrator, Double Integrator, and Dubins Car dynamics. Experimental results show improved safe rate and success rate across all dynamics, including dynamics not used during adapter training, while maintaining goal-reaching performance with a small safety–completion trade-off.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_32"
    },
    {
      "id": "ThPo4P.33",
      "paperId": "71",
      "title": "CIRRUS-BEV: Fast Cartesian Image Retrieval with Residual Update for Cross-Day LiDAR Place Recognition",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525289",
          "name": "Kang, Dongyun",
          "affiliation": "Department of Mechanical Engineering, KAIST"
        },
        {
          "id": "349071",
          "name": "Yang, Seunghoon",
          "affiliation": "KAIST"
        },
        {
          "id": "126125",
          "name": "Kim, Kyung-Soo",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Long-term autonomous driving requires LiDAR place recognition that remains robust under cross-day appearance changes while satisfying real-time runtime constraints. This paper presents CIRRUS-BEV (Cartesian Image Retrieval with Residual Update for Scan Localization in BEV), a lightweight Cartesian bird’s-eye-view (BEV) pipeline for cross-day LiDAR place recognition and local 2-D pose refinement. Unlike polar Scan Context-style descriptors, CIRRUS-BEV uses a unified six-channel Cartesian BEV representation for both fast global retrieval and metric residual refinement. The pipeline retrieves a database scan using a precomputed BEV descriptor, estimates an initial alignment by phase correlation, and predicts a bounded residual update from an 18-channel BEV pair tensor. Experiments on a Munji-campus cross-day protocol demonstrate that CIRRUS-BEV improves valid-positive top-1 recall at 1 m from 79.92% to 88.91% compared with Scan Context, while reducing online query runtime from 33.997 ms to 5.118 ms. The resulting 195.4 Hz online rate is approximately 6.6× faster than the measured Scan Context pipeline. These results show that a height-aware Cartesian BEV representation can support both accurate retrieval and efficient local refinement for real-time cross-day LiDAR localization.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_33"
    },
    {
      "id": "ThPo4P.34",
      "paperId": "81",
      "title": "AdaM-VIO: Robust Adaptive Multi-Camera Visual-Inertial Odometry in Degenerate Indoor Environments",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525402",
          "name": "Lee, Chanhyuk",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "508349",
          "name": "Lee, Wonbin",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "525384",
          "name": "Kim, Dongjae",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Vision",
        "Sensors and Signal Processing"
      ],
      "abstract": "Multi-camera visual-inertial odometry (VIO) improves pose estimation robustness by leveraging wide field-of-view coverage. However, most existing systems weight all cameras and observations equally during optimization. In degenerate indoor environments, geometrically unreliable views therefore retain full influence and cause drift. We propose AdaM-VIO, an adaptive two-level weighting method for robust multi-camera VIO. In the optimization back-end, AdaM-VIO rescales the information matrix of each reprojection factor using two weights: a camera-level weight derived from per-camera feature support and a depth-aware weight derived from landmark depth. Together, they reduce the influence of weakly supported views and close-range observations. We evaluate AdaM-VIO on the HILTI SLAM Challenge 2022 benchmark, where it achieves the highest total localization score among all compared visual-inertial systems.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_34"
    },
    {
      "id": "ThPo4P.35",
      "paperId": "90",
      "title": "TDPF: Temporal Dynamic Prior Filter for Radar Ego Velocity Estimation in Highly Dynamic Environments",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525455",
          "name": "Kim, Haechang",
          "affiliation": "Yonsei University"
        },
        {
          "id": "286579",
          "name": "Lee, Eungchang Mason",
          "affiliation": "Carnegie Mellon University"
        },
        {
          "id": "348874",
          "name": "Park, Chanjoon",
          "affiliation": "Korea Advanced Institute of Science & Technology"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "Radar-based odometry has attracted growing attention due to its robustness under adverse weather, degraded illumination, and geometrically degenerate environments. Accurate ego velocity estimation is important for radar-based odometry systems, as it provides motion constraints for state estimation. However, conventional Doppler-based methods assume that static points dominate the measured scan. This assumption may fail in highly dynamic environments, which can lead to substantial estimation degradation. To address this challenge, the temporal dynamic prior filter (TDPF), a static-conditioning framework that identifies and removes dynamic points by exploiting temporal priors before ego velocity estimation, is proposed, thereby recovering a static-dominant measurement set. Rather than classifying dynamic points independently in every frame, TDPF systematically accumulates dynamic points across frames and constructs a set of persistent spatial priors to guide dynamic removal on the current scan. Experimental results on the MSC-RAD4R Urban and NTU4DRadLM datasets show that TDPF improves ego velocity estimation accuracy and odometry precision on dynamic urban sequences.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_35"
    },
    {
      "id": "ThPo4P.36",
      "paperId": "122",
      "title": "Terminal Constraint Model Predictive Control for Image-Based Visual Servoing of UAVs with Kalman Filter-Based Moment Loss Compensation",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "475384",
          "name": "Wang, Xiaoyu",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "525678",
          "name": "Cao, Yude",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "229258",
          "name": "Leong, Wai Lun",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "370924",
          "name": "Tan, Yan Rui",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "159929",
          "name": "Huang, Sunan",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "107446",
          "name": "Teo, Rodney",
          "affiliation": "NUS"
        },
        {
          "id": "125465",
          "name": "Xiang, Cheng",
          "affiliation": "National University of Singapore"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Image-Based Visual Servoing (IBVS) provides an efficient vision-guided control paradigm for unmanned aerial vehicles (UAVs) by directly regulating image-space errors. However, conventional IBVS controllers are vulnerable to two critical issue: loss of closed-loop stability near the target due to input and state constraints, and control failure caused by intermittent loss of moment-based visual features under aggressive motion. To address these challenges, this paper proposes a terminal-constraint model predictive control (TC-MPC) framework for IBVS, integrating with a Kalman filter (KF)– based state-prediction mechanism. The TC-MPC explicitly incorporates terminal-state constraints and a terminal cost into the IBVS error dynamics, ensuring recursive feasibility, improved convergence behavior, and closed-loop stability under control and state constraints. In parallel, the Kalman filter predicts the temporal evolution of image moments during short-term visual degradation, enabling the controller to preserve control continuity when moment measurements are partially unavailable. The proposed approach is validated through real-time UAV visual servoing experiments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_36"
    },
    {
      "id": "ThPo4P.37",
      "paperId": "127",
      "title": "Aerodynamic Angle Estimation for Launch Vehicles under Weak Observability Using Nominal Wind-Aided Schmidt-Kalman Filtering",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525485",
          "name": "Yoo, Seunghoo",
          "affiliation": "Kookmin University"
        },
        {
          "id": "525510",
          "name": "Jung, Hyeon Kwang",
          "affiliation": "KOOKMIN University"
        },
        {
          "id": "525503",
          "name": "Ha, Kyoung Nam",
          "affiliation": "HANWHA Aerospace"
        },
        {
          "id": "332684",
          "name": "Park, Jongho",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents an aerodynamic angle estimation framework for launch vehicles under weak observability conditions. Aerodynamic angles, such as the angle of attack and sideslip angle, are important quantities for aerodynamic load reduction and flight performance evaluation. However, because GPS/INS measurements provide ground velocity rather than air-relative velocity, the air-relative velocity required for aerodynamic angle information cannot be directly obtained in the presence of wind. This problem becomes more pronounced for launch vehicles, which generally operate near a nominal trajectory with limited attitude excitation over many flight segments. As a result, the ground velocity measurement alone provides insufficient information to clearly separate the air-relative velocity from the wind compo- nent, leading to weak observability in aerodynamic angle estimation. To mitigate this estimation problem, prior wind information is introduced as a nominal wind profile. The nominal wind reduces the ground velocity measurement residual by accounting for the dominant wind contribution in advance. The remaining wind mismatch is modeled as a residual wind uncertainty and treated as a nuisance state. Accordingly, a Schmidt-Kalman filter update is applied to propagate this residual wind uncertainty while limiting its direct influence on the correction of the air-relative velocity. This nuisance- state treatment improves estimation robustness under weak observability by reducing erroneous corrections that may be introduced when a weakly observable state is directly estimated. The numerical simulation results demonstrate that the proposed method improves aerodynamic angle estimation performance under weak observability conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_37"
    },
    {
      "id": "ThPo4P.38",
      "paperId": "129",
      "title": "Investigation of Effective State Representation for Side-Scan Sonar SLAM under Elevation Degeneracy",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "408967",
          "name": "Im, Jinho",
          "affiliation": "Keimyung University"
        },
        {
          "id": "223911",
          "name": "Hong, Seonghun",
          "affiliation": "Keimyung University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Side-scan sonar (SSS) has emerged as a promising sensing modality for underwater simultaneous localization and mapping (SLAM) because of its long-range sensing capability and wide-area seabed coverage. In landmark-based SSS SLAM, salient seabed features are typically represented using slant-range and azimuth observations derived from acoustic measurements. However, due to the sensing geometry of SSS, landmark elevation remains only weakly constrained by the measurements. This limitation, referred to in this work as elevation degeneracy in SSS SLAM, can introduce estimation inconsistency when conventional full 6-DOF formulations are directly adopted. This study investigates how landmark elevation uncertainty influences state estimation in landmark-based SSS SLAM under elevation degeneracy. In particular, Jacobian analysis of the slant-range and azimuth observation model is performed to examine how native SSS measurements contribute to each component of the vehicle state and influence the overall estimation behavior. Based on this analysis, an effective vehicle state representation is identified according to the observability characteristics imposed by the sensing geometry. The effectiveness of the resulting reduced 4-DOF state representation, which excludes roll and pitch, is validated through comparative physics-based underwater simulation experiments against a conventional 6-DOF formulation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_38"
    },
    {
      "id": "ThPo4P.39",
      "paperId": "199",
      "title": "Development of a Mobile Robot System for Poultry Farm Corridor Navigation: Line-Tracing-Based Path Perception and UWB-Aided Localization",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525910",
          "name": "Jung, Yoonsik",
          "affiliation": "Kyung Hee University"
        },
        {
          "id": "442668",
          "name": "Choi, JeongHwan",
          "affiliation": "Kyunghee University"
        },
        {
          "id": "442641",
          "name": "Kim, Hyunwoo",
          "affiliation": "Kyung-Hee University"
        },
        {
          "id": "525884",
          "name": "Choi, Eun Hyuk",
          "affiliation": "Department of Electronic Engineering, Kyung Hee University"
        },
        {
          "id": "442636",
          "name": "Jin, Ilseong",
          "affiliation": "Kyung Hee University"
        },
        {
          "id": "131348",
          "name": "Kim, Donghan",
          "affiliation": "Kyung Hee University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "Poultry farm corridors are narrow and contain repeatedly arranged feeding and watering structures, making stable path perception and localization difficult for mobile robots. In addition, GNSS reception is limited inside poultry houses, so auxiliary position information is required to compensate for the accumulated error of LiDAR-IMU-based local\u0002ization. In this study, a mobile robot system for poultry farm corridor navigation was implemented. The proposed system generates a corridor reference and a driving target point using a depth camera and LiDAR point cloud, and estimates the robot trajectory using LiDAR-IMU-based localization and UWB position information together. Quantitative evaluation was performed through line-tracing output stability evaluation and localization evaluation in an outdoor terrain valida\u0002tion environment, and field applicability was then confirmed by operating the robot in an actual poultry farm corridor. The experimental results showed that line-tracing achieved a target generation rate of more than 96%, and the proposed algorithm reduced the localization error by approximately 60.2% in terms of ATE RMSE compared with the baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_39"
    },
    {
      "id": "ThPo4P.40",
      "paperId": "212",
      "title": "Zero-Shot Object Navigation with External Consultation for Ambiguous Frontier Decisions",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463102",
          "name": "Akor, Michael",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "109584",
          "name": "Lee, Heoncheol",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Human-Robot Interaction",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Autonomy is most useful when it knows its limits. As artificial intelligence (AI) systems take on more open-ended decisions, their reliability depends on knowing when to act alone and when to seek guidance. We study this question in zero-shot object-goal navigation, where vision-language frontier maps can search for unseen object categories but become unreliable when multiple frontiers receive nearly tied semantic scores. We propose an ambiguity-triggered consultation layer that preserves the autonomous navigation pipeline by default and asks a human advisor only at uncertain frontier decisions. The advisor is constrained to select from the robot’s own candidate frontiers, making consultation a local correction rather than a replacement for navigation. On Habitat-Matterport 3D ObjectNav, ambiguous frontier decisions are common and associated with unreliable autonomous choices. Our analysis shows that ambiguity-triggered consultation improves success from 55.0% to 70.0%. On the full 2,000-episode validation benchmark, the map-agnostic and map-aware advisors reach 63.4% and 65.8% success, respectively, compared with 52.5% for VLFM.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_40"
    },
    {
      "id": "ThPo4P.41",
      "paperId": "222",
      "title": "Fuzzy Logic-Based Arbitrator for Local-Minima Escape in Hybrid Reactive UAV Path Planning",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526021",
          "name": "Arab, Phillip",
          "affiliation": "Concordia University"
        },
        {
          "id": "526345",
          "name": "Xia, Bingze",
          "affiliation": "Concordia University"
        },
        {
          "id": "118430",
          "name": "Xie, Wenfang",
          "affiliation": "Concordia University"
        },
        {
          "id": "134777",
          "name": "Mantegh, Iraj",
          "affiliation": "National Research Council Canada"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Robotic Applications"
      ],
      "abstract": "Autonomous navigation of uncrewed aerial vehicles (UAVs) in cluttered environments remains an open challenge, particularly due to the local minima problem: concave obstacle geometries and sequential trap configurations routinely cause planning failure in reactive schemes. This paper presents a fuzzy logic (FL) supervisory layer to arbitrate in real time among three planning strategies with complementary strengths — artificial potential fields (APF), wall-following (WF), and virtual obstacles (VO) – functioning as a decision-making brain that selects the most suitable planning arm for each encountered scenario. Prior reactive planners address local minima by modulating the force vector within a single strategy; operating instead at the strategy-selection level, the proposed architecture switches among architecturally distinct planners, enabling robust escape from multiple sequential traps and preventing cyclic re-entrapment. A novel geometric switching indicator is developed that governs smooth, loop-free inter-strategy transitions. An ablation study evaluates the incremental integration of each escape mechanism arbitrated by the FL supervisor. Monte Carlo simulations across five purpose-built environments — featuring chained concave geometries of substantially greater complexity than standard benchmarks — demonstrate a significantly higher success rate without sacrificing path efficiency or safety.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_41"
    },
    {
      "id": "ThPo4P.42",
      "paperId": "226",
      "title": "Time–Frequency Constrained Autopilot-Aware Proportional Navigation Gain Scheduling for Short-Range Missile Engagements with Maneuvering Targets",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526031",
          "name": "Koca, Arif Mertcan",
          "affiliation": "Middle East Technical University"
        },
        {
          "id": "354187",
          "name": "Soken, Halil Ersin",
          "affiliation": "Middle East Technical University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents an autopilot-aware proportional navigation gain-scheduling framework for short-range missiles engaging maneuvering targets. The classical Proportional Navigation Guidance (PNG) law is re-designed under joint time- and frequency-domain constraints to enhance interception accuracy while preserving closed-loop robustness. Unlike conventional cascaded configurations, the proposed method models the guidance and autopilot subsystems as a single closed-loop structure, enabling coordinated dynamic behavior. A previously designed inner-loop Linear Quadratic Integrator (LQI) autopilot is employed as the acceleration tracking system, providing a stable and well-damped baseline for the proposed framework. The navigation constant N is reformulated as a tunable control gain and optimized under joint overshoot and stability-margin constraints derived from the closed-loop guidance–control dynamics, enabling gain scheduling that balances agility and robustness throughout the engagement. Within this unified framework, Monte Carlo simulations including aerodynamic, propulsion, sensor, and environmental uncertainties, as well as actuator constraints, are conducted to evaluate the robustness of the proposed architecture. The results show that the resulting closed-loop guidance–control structure provides improved terminal accuracy and smoother control effort during moving-target engagements compared with conventional fixed-gain PNG configurations, demonstrating the effectiveness of time–frequency constrained navigation gain scheduling for short-range missile scenarios.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_42"
    },
    {
      "id": "ThPo4P.43",
      "paperId": "230",
      "title": "Collision-Candidate Velocity Clustering for Adaptive Dynamic Window Approach in Local Path Planning",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526124",
          "name": "Park, In",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "314591",
          "name": "Shin, Jongho",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Dynamic Window Approach (DWA) is widely used for local path planning of mobile robots. However, conventional DWA relies on fixed velocity-space sampling and fixed parameter settings. This can cause unnecessary computation in safe velocity regions. It can also reduce candidate resolution in complex environments. In addition, fixed parameters limit adaptation to changing driving conditions. This paper proposes Adaptive Focus-Band (AFB)-DWA to mitigate these limitations. The proposed method consists of two components. First, a Focus-Band (FB) sampling scheme augments candidate velocities near collision-candidate boundaries. Second, the collision-candidate ratio quantifies the complexity of the surrounding environment. AFB-DWA then adjusts the prediction horizon, maximum considered distance, and obstacle-avoidance weight according to this ratio. Simulation and real-robot experiments show that AFB-DWA improves goal-reaching reliability, travel efficiency, and trajectory smoothness compared with the baseline DWA.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_43"
    },
    {
      "id": "ThPo4P.44",
      "paperId": "242",
      "title": "Object-Centric View Planning for Photometric 3D Reconstruction",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "491884",
          "name": "Hwang, Jinhwa",
          "affiliation": "Sookmyung Women's University"
        },
        {
          "id": "286579",
          "name": "Lee, Eungchang Mason",
          "affiliation": "Carnegie Mellon University"
        },
        {
          "id": "216281",
          "name": "Lee, Alex",
          "affiliation": "Sookmyung Women’s University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Object-centric 3D Gaussian Splatting (3DGS) depends strongly on the initial posed images available before optimization. This extended abstract presents a mesh-guided viewpoint initialization method for robotic photometric reconstruction when the target object and its approximate geometry are known. A multi-shell Fibonacci prior generates robot-feasible candidate viewpoints around the target mesh, and a reconstruction-oriented utility selects a compact image-pose set by balancing mesh coverage, surface frontality, viewing-direction diversity, top-view balance, and local view overlap. In ROS/Gazebo experiments on engine, cat, and cow object models, the proposed initialization improves mean SSIM and PSNR, consistently reduces LPIPS, and reduces exploration CPU time compared with a SWAP-style baseline under the same viewpoint budget.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_44"
    },
    {
      "id": "ThPo4P.45",
      "paperId": "244",
      "title": "Deep Reinforcement Learning-Based Integrated Guidance and Control with Infrared Image",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "392508",
          "name": "Kim, Seongyeon",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "314591",
          "name": "Shin, Jongho",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "486164",
          "name": "Kim, Hyeong-Geun",
          "affiliation": "Konkuk University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents a deep reinforcement learning-based integrated guidance and control (IGC) method for missile target interception. The proposed method uses infrared (IR) image information. Conventional missile systems usually separate guidance and autopilot control. This structure is simple, but it can reduce performance when missile dynamics, target motion, and sensor uncertainty are strongly coupled. To solve this problem, the proposed method learns one end-to-end policy based on soft actor-critic (SAC). The policy uses guidance-control states and visual features from synthetic IR images. In addition, an action-smoothing term is added to the actor loss. This term reduces control chattering without using an external command filter during inference. Simulation results show that the proposed IR-enhanced SAC policy improves success rate, terminal accuracy, and control smoothness. The results also show that perception-aware DRL is feasible for integrated missile guidance and control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_45"
    },
    {
      "id": "ThPo4P.46",
      "paperId": "256",
      "title": "Large-Scale Drone Swarm Formation Transition Planning with Workload-Balanced Assignment and Bézier Trajectory Fitting",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "409572",
          "name": "Kim, Taeyeon",
          "affiliation": "Seoul National University of Science and Technology (SeoulTech), LARS (Lab for Autonomous Robotics System)"
        },
        {
          "id": "526160",
          "name": "Kim, Hyunsoo",
          "affiliation": "Seoul National University of Science and Technology (SeoulTech)"
        },
        {
          "id": "147810",
          "name": "Lim, Hyon",
          "affiliation": "UVify, Inc"
        },
        {
          "id": "474030",
          "name": "Park, Jungwon",
          "affiliation": "Seoul National University of Science and Technology"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Large-scale drone swarm systems require safe, smooth, and synchronized 3D formation transitions for thousands of unmanned aerial vehicles (UAVs). However, multiple consecutive formation transitions can result in uneven cumulative flight distances among UAVs, and storing dense trajectories for large swarms can impose substantial data overhead. This paper proposes an integrated framework that combines workload-balanced task allocation, acceleration-bounded ORCA-based trajectory generation, and compact Bézier trajectory fitting. The proposed method minimizes the maximum cumulative travel distance over consecutive formation transitions to balance workload among UAVs. Based on the balanced assignment, synchronized and collision-free trajectories are generated under velocity and acceleration constraints. The dense trajectories are then converted into compact piecewise Bézier representations while preserving trajectory accuracy, continuity, and dynamic feasibility. Simulation results with up to 10,000 drones demonstrate improved workload balance, collision-free transitions, and more than 95% reduction in trajectory data size, confirming the scalability and effectiveness of the proposed framework.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_46"
    },
    {
      "id": "ThPo4P.47",
      "paperId": "328",
      "title": "Wave-Disturbance Response of a Hybrid Feedback Station-Keeping System Incorporating Force Sensing for an Unmanned Surface Vehicle",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527358",
          "name": "Kim, Gyeong-Ho",
          "affiliation": "Korea University"
        },
        {
          "id": "527378",
          "name": "Kim, Seoyeon",
          "affiliation": "Korea Institute of Science and Technology(KIST)"
        },
        {
          "id": "151511",
          "name": "Kang, Jiyeon",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "527492",
          "name": "Chung, Seok",
          "affiliation": "Korea University"
        },
        {
          "id": "527534",
          "name": "Kim, Seong Jin",
          "affiliation": "Korea Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Wave-induced disturbances can degrade the station-keeping performance of an unmanned surface vehicle (USV) by causing deviations from the target position. Conventional position-feedback station-keeping control generates corrective inputs from the resulting errors, making its response inherently reactive after the disturbances have appeared as vehicle motion. To overcome this limitation, this paper proposes a force-sensing-integrated hybrid feedback station-keeping control method for a USV equipped with artificial lateral line system based pressure sensor arrays. The proposed method uses hull-side pressure variations as a force-sensing feedback source related to wave-induced lateral loading. Pressure sensor arrays installed on both sides of the hull measure asymmetric pressure variations under lateral wave disturbances, and the left--right pressure imbalance is converted into a lateral compensation term in the sway control input. Tank-based experiments were conducted using an artificial wave generation system to provide repeatable lateral disturbance conditions. Compared with position-feedback control (PFC), force-sensing-integrated hybrid feedback station-keeping control (HFC) was observed to reduce the RMS position variation by 56% in the direction parallel to the applied wave disturbance and by 62% in the perpendicular direction.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_47"
    },
    {
      "id": "ThPo4P.48",
      "paperId": "363",
      "title": "Risk-Aware MPPI Control with Online Learning",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "409175",
          "name": "Kim, Jung Su",
          "affiliation": "SeoulTech"
        },
        {
          "id": "409186",
          "name": "Fauz, Hanif Edma",
          "affiliation": "Seoul National University of Science and Technology"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes a robust Risk-aware Model Predictive Path Integral (MPPI) control framework that quantifies state-space uncertainty online using a Sparse Gaussian Process (SGP). The framework uses the SGP-predicted mean to correct nominal bicycle dynamics and utilizes the predictive variance to dynamically scale disturbance covariance for risk propagation. Validated on an F1TENTH platform in both Gazebo simulations and real-world tracks, the proposed method significantly improves safety and trajectory tracking performance over baseline MPPI techniques without compromising real-time feasibility.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_48"
    },
    {
      "id": "ThPo4P.49",
      "paperId": "422",
      "title": "SE(2)-Based State Estimation for Unmanned Surface Vehicles Using Dual-Antenna GNSS and AHRS",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "409261",
          "name": "Jeong, Da Bin",
          "affiliation": "Korea Institute of Robotics & Technology Convergence (KIRO)"
        },
        {
          "id": "130223",
          "name": "Choi, Hyun-Taek",
          "affiliation": "Korea Research Institute of Ships and Oceans Engineering"
        },
        {
          "id": "253183",
          "name": "Ko, Nak Yong",
          "affiliation": "Chosun University"
        },
        {
          "id": "305510",
          "name": "Kim, Jungjun",
          "affiliation": "Korea Institute of Robotics and Technology Convergence"
        },
        {
          "id": "526751",
          "name": "Lee, Min Woo",
          "affiliation": "Korea Institute of Robotics & Technology Convergence"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Accurate state estimation is a fundamental requirement for reliable navigation and control of unmanned surface vehicles (USVs). Since the planar motion of a USV includes both translational position and heading, representing the pose in a conventional Euclidean state space may lead to inconsistent error computation, particularly for angular states. This paper presents an SE(2)-based state estimation method for USVs using dual-antenna GNSS and AHRS. The USV pose, consisting of position and heading, is represented as an element of SE(2), while the forward speed and yaw rate are included as additional motion states. The proposed estimator propagates the pose on SE(2) through the exponential map and computes the innovation in the corresponding Lie algebra using the logarithmic map. The measurement vector is constructed from state- corresponding sensor outputs, where the dual-antenna GNSS provides position, heading, and speed information, and the AHRS provides yaw-rate information. By performing the prediction and correction processes on the manifold, the proposed method handles pose-related errors in a geometrically consistent manner. Simulation and experimental evaluations are conducted to verify the feasibility of the proposed estimator for planar USV navigation. The results show that the SE(2)-based formulation provides stable state estimation performance for position, forward speed, and heading states.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_49"
    },
    {
      "id": "ThPo4P.50",
      "paperId": "67",
      "title": "Physics-Based Data Augmentation Using the Integral Imaging Method",
      "session": "ThPo4P",
      "date": "2026-10-29",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525310",
          "name": "You, Seungjin",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "407498",
          "name": "Cho, Myungjin",
          "affiliation": "Hankyong National University"
        },
        {
          "id": "407488",
          "name": "Lee, Min-Chul",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing"
      ],
      "abstract": "As the demand for large-scale training data grows to enhance computer vision models, conventional methods such as manipulation-based augmentation or generative (artificial intelligence) AI synthesis face limitations, including corrupted physical consistency and the generation of optical hallucinations. To address these challenges, this paper proposes a physics-based data augmentation technique utilizing integral imaging technology. The proposed method interprets multi-view elemental images as spatial-angular sequential data and synthesizes high-resolution images from virtual viewpoints using the Virtual Focal Point with Beams (VFPB) model. Experimental results demonstrate that the augmented images achieve high quality, with an average peak signal-to-noise ratio (PSNR) of 38 and structural similarity index measure (SSIM) of 0.98 compared to the original reference. Furthermore, by precisely adjusting optical parameters such as the virtual focal distance and beam size, the generated datasets can flexibly inherit and expand the visual characteristics of the original multi-view images without requiring additional real-world data collection or complex computational rendering. This method presents a new physics-based learning paradigm that provides high-quality customized data optimized for domain-specific AI training, which is often difficult to address with general-purpose datasets.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo4p_50"
    },
    {
      "id": "ThPo5P.1",
      "paperId": "429",
      "title": "Development of a Double-Loop Sliding Mode Control for Path Tracking of a Differential Drive Robot Using NVIDIA Isaac Sim",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528236",
          "name": "Jo, Suyeon",
          "affiliation": "Kongju National University"
        },
        {
          "id": "528223",
          "name": "Kim, Dongju",
          "affiliation": "Kongju National University"
        },
        {
          "id": "528043",
          "name": "Kim, Moon-Sik",
          "affiliation": "Kongju National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "This paper proposes a Double-loop Sliding Mode Controller (SMC) integrating kinematics and motor dynamics for high-precision path tracking of a differential drive mobile robot. The upper-level kinematics-based SMC computes reference velocities to minimize tracking errors, while the lower-level motor-dynamics-based SMC generates torque commands to compensate for actuator uncertainties. This hierarchical structure effectively resolves dynamic disturbances from a kinematic perspective without requiring full rigid-body modeling. The proposed controller was validated through high-fidelity 3D simulations in NVIDIA Isaac Sim. Results demonstrate that the Double-loop SMC achieves a steady-state position tracking RMSE of 0.0034 m and a motor angular velocity RMSE of 0.0045 rad/s, significantly outperforming a conventional PID controller (position RMSE: 0.0219 m). Under intentional external disturbances, the proposed SMC achieved a position tracking RMSE of 0.0004 m, compared with 0.0195 m for the PID controller.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_01"
    },
    {
      "id": "ThPo5P.2",
      "paperId": "435",
      "title": "A Study on Perception Uncertainty-Aware Based D* Lite Path Planning for Autonomous Vehicle",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528219",
          "name": "Kim, HyunJoon",
          "affiliation": "Kongju National University"
        },
        {
          "id": "528221",
          "name": "Park, Heung-Sik",
          "affiliation": "Kongju National University"
        },
        {
          "id": "539462",
          "name": "Kim, Jung-Hun",
          "affiliation": "Kongju National University"
        },
        {
          "id": "528043",
          "name": "Kim, Moon-Sik",
          "affiliation": "Kongju National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "This study proposes a Perception-Uncertainty-Aware D* Lite path planning method that incorporates perception confidence into both the magnitude and spatial spread of a Gaussian cost function within a Multi-Layer Costmap. The static environment is represented in the L1 layer, whereas the positional uncertainty of dynamic obstacles is modeled in the L2 layer. The confidence-dependent cost is then integrated with D* Lite to enable real-time incremental replanning. The proposed method is validated in MATLAB through two scenarios. In Scenario A, the planned path varied according to the perception confidence assigned to a single obstacle, confirming that confidence affects both the magnitude and the spatial extent of the cost function. In Scenario B, with five dynamic obstacles undergoing random-walk motion, the vehicle reached the goal without collision. Compared with the conventional method, the proposed method achieved a larger average obstacle-vehicle clearance for all obstacles, while D* Lite efficiently replanned the path by recomputing only the cells affected by cost changes.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_02"
    },
    {
      "id": "ThPo5P.3",
      "paperId": "450",
      "title": "Consensus-Based Safety-Critical Control for Multi-UAV Systems under Communication Delays",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "475884",
          "name": "Jeong, Jinyoung",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "161438",
          "name": "Shin, Hyo-Sang",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Safe coordination of multiple unmanned aerial vehicles (UAVs) under communication delays is challenging because each vehicle must avoid collisions using uncertain neighbor information. This paper presents an uncertainty-aware safety-critical control framework based on a high-order control barrier function (HOCBF). Each UAV predicts neighboring states from delayed communication packets and uses a data-driven uncertainty bound to inflate the pairwise safety constraint. This yields a conservative robust safety filter that maintains collision avoidance under prediction uncertainty. To reduce unnecessary conservatism, a consensus-based safety filtering structure is introduced, where pairwise safety responsibility is distributed through continuous safety-burden variables. The allocation is updated in a distributed manner using a consensus alternating direction method of multipliers (C-ADMM) procedure. Simulation results on an 8-UAV scenario demonstrate a 23.9% faster task completion compared with the robust safety filter baseline, while maintaining all safety constraints.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_03"
    },
    {
      "id": "ThPo5P.4",
      "paperId": "452",
      "title": "Angular Velocity Estimation Using Hall Sensors and an Unscented Kalman Filter for Reaction-Wheel-Based Satellites",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "475909",
          "name": "Kim, GyeongMin",
          "affiliation": "Sejong University"
        },
        {
          "id": "408755",
          "name": "Nguyen, Xuan Mung",
          "affiliation": "Sejong University"
        },
        {
          "id": "471318",
          "name": "Junyong, Lee",
          "affiliation": "Sejong University"
        },
        {
          "id": "148316",
          "name": "Hong, Sung Kyung",
          "affiliation": "Sejong University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes an angular velocity estimation method for reaction-wheel-based satellites under gyroscope fault conditions. In small satellites, high-performance gyroscopes are expensive, and redundant sensor configurations are often difficult to implement due to mass, volume, and cost constraints. These limitations motivate the development of an alternative approach that can provide reliable angular velocity information even when gyroscope measurements become unavailable. To address this issue, the proposed method utilizes Hall sensor measurements from the reaction wheels and combines them with an Unscented Kalman Filter (UKF) to estimate the satellite angular velocity. By exploiting the relationship between reaction wheel information and satellite attitude dynamics, the proposed approach can provide the state information required for attitude control without relying solely on gyroscope measurements. In this sense, the method can serve not only as a fault-tolerant solution under gyroscope failure conditions but also as a potential estimation framework for gyroless satellite systems. Simulation results demonstrate that the proposed method can effectively estimate angular velocity under gyroscope fault conditions. These results indicate that the proposed approach has the potential to improve the fault tolerance and operational reliability of reaction-wheel-based small satellites.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_04"
    },
    {
      "id": "ThPo5P.5",
      "paperId": "482",
      "title": "Real-Time Obstacle Avoidance and Local Path Planning for People with Visual Impairments Using Monocular Depth Estimation and Occupancy Grid Mapping",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528179",
          "name": "Lee, Jhimin",
          "affiliation": "Korea University"
        },
        {
          "id": "528177",
          "name": "Yoon, Insung",
          "affiliation": "Korea University"
        },
        {
          "id": "528189",
          "name": "Jeong, Hayeon",
          "affiliation": "Korea University"
        },
        {
          "id": "528187",
          "name": "Kim, Minji",
          "affiliation": "Korea University"
        },
        {
          "id": "528185",
          "name": "Kim, Jin Hyun",
          "affiliation": "Korea University"
        },
        {
          "id": "228897",
          "name": "Kim, Daekyum",
          "affiliation": "Korea University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "At least 2.2 billion people worldwide live with near or distance visual impairments, motivating the development of portable assistive navigation systems that can extend sensing capability beyond the physical reach of a cane without the additional hardware, calibration, and synchronization requirements of multi-sensor platforms. This paper presents a real-time obstacle-avoidance and local path planning system for people with visual impairments that relies on a single monocular camera. Per-pixel relative depth is estimated using Depth Anything V2-Small and converted into an occupancy grid. A three-stage classifier then filters to classify obstacles, free space, and floor cells while reducing isolated false positives. The grid is projected into a bird’s-eye view, and an A* planner with a straight-ahead-priority cost computes a stable route that is conveyed through a spatial-audio interface. Each grid is computed independently per frame, without pose estimation, temporal fusion, or a global map. Thus, planning is local to the current view. On 100 manually annotated Mapillary Vistas frames, the proposed grid achieves a precision of 0.9792, a recall of 0.8436, an F2 score of 0.8676, and an IoU of 0.8287 for near-field obstacle cells. On 976 consecutive frame pairs drawn from 24 egocentric walking clips of a public first-person pedestrian video dataset, the grid achieves a mean motion-compensated temporal consistency of 0.9043. The full pipeline runs at ~30 FPS on an NVIDIA RTX 4050 Laptop GPU, with the local path planning stage capped at 10 FPS so that each ~1 Hz audio cycle latches a stable, clearly communicable route.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_05"
    },
    {
      "id": "ThPo5P.6",
      "paperId": "525",
      "title": "Degeneracy Analysis of FAST-LIO2 for Mobile Robots with Low-Mounted 3D LiDAR",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528160",
          "name": "Choi, Jinsol",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "393581",
          "name": "Cha, Sehyun",
          "affiliation": "LG Electronics"
        },
        {
          "id": "298836",
          "name": "Lee, Kangneoung",
          "affiliation": "LG Electronics"
        },
        {
          "id": "104629",
          "name": "Choi, Jeong-Sik",
          "affiliation": "Seoul National University"
        },
        {
          "id": "135538",
          "name": "Eoh, Gyuho",
          "affiliation": "Tech University of Korea"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "FAST-LIO2 has been widely adopted in various 3D LiDAR-based SLAM applications owing to its high accuracy and real-time performance. However, most existing studies have considered platforms with LiDAR sensors mounted at sufficient heights to ensure a wide field of view. In low-profile mobile robots, such as robotic vacuum cleaners, LiDAR sensors are often mounted close to the ground, the observed point clouds tend to be concentrated near floor-level features, which may contribute to limited geometric diversity. As a result, FAST-LIO2 becomes more susceptible to degeneracy under such configurations. Existing degeneracy analyses have mainly relied on the eigenvalue structure of the information matrix. However, this approach reflects only geometric observability and may not fully capture the accumulated uncertainty of the filter state. To address this limitation, this paper proposes the simultaneous use of condition number and position covariance as degeneracy indicators. The condition number reflects geometric observability, whereas position covariance represents accumulated state uncertainty within the filter. Experimental results show that both indicators remain stable in normal sequences, whereas at least one changes significantly in degraded situations. This behavior confirms the effectiveness of the proposed indicators for degeneracy identification in FAST-LIO2 with low-mounted 3D LiDAR.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_06"
    },
    {
      "id": "ThPo5P.7",
      "paperId": "539",
      "title": "Probabilistic Safety Filter with Safety-Transition Surrogates under Non-Gaussian Disturbances",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "475870",
          "name": "Koo, Soyeon",
          "affiliation": "KAIST"
        },
        {
          "id": "161438",
          "name": "Shin, Hyo-Sang",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Control Theory and Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper proposes a probabilistic safety filter based on control barrier functions (CBFs) for stochastic nonlinear systems under non-Gaussian disturbances. Instead of identifying the full dynamics or the disturbance distribution, the proposed method learns the one-step transition of a sampled safety coordinate defined from a physical barrier. A random Fourier feature (RFF) representation motivated by kernel mean embedding (KME) and a bilinear Koopman surrogate are used to obtain an affine-in-control safety constraint. To account for unsafe overestimation by the learned model, a one-sided residual margin is computed from independent calibration transitions and inserted into the CBF condition. The resulting residual-calibrated constraint is implemented as an online quadratic program (QP) safety filter with input bounds. Simulation results on adaptive cruise control and Dubins car obstacle avoidance under Student-t disturbances show that the proposed method reduces observed safety violations compared with Gaussian chance-constrained CBF, while maintaining empirical performance comparable to bounded-disturbance Robust CBF.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_07"
    },
    {
      "id": "ThPo5P.8",
      "paperId": "544",
      "title": "Coverage-Aware Stop-And-Scan Frontier Exploration for Automated Survey-Grade 3D Mapping",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463934",
          "name": "Kim, Sangmin",
          "affiliation": "Sungkyunkwan Univ"
        },
        {
          "id": "319832",
          "name": "Kuc, Tae-Yong",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Robotic Applications",
        "Robot Vision"
      ],
      "abstract": "Survey-grade terrestrial laser scanners produce dense, colorized point clouds but require the platform to remain stationary for minutes at each scan pose and provide no real-time registration, so conventional continuous-motion frontier exploration does not apply. This paper presents an automated stop-and-scan mapping subsystem that couples a frontier-exploration layer with a stop-and-scan sequencer through a distance gate and a coverage-based scan/skip decision. A multi-objective frontier cost with a bounded-horizon visit-order optimization reduces redundant travel between costly scan stops, while a prior-scan coverage radius suppresses redundant stationary acquisitions in already-covered space. In a physics-based simulation built from a real scan of a laboratory testroom, the proposed coverage-aware trigger maps the room with three stationary scans versus twenty-one for a distance-traveled baseline—a sevenfold reduction in expensive acquisitions—while holding the free-space map IoU at 0.965 and reaching 91.0% room coverage. The system is also verified against a real BLK360 scanner over a wireless link in a hybrid configuration.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_08"
    },
    {
      "id": "ThPo5P.9",
      "paperId": "578",
      "title": "Failure-Aware LLM-DWA Replanning for Mobile Robot Navigation in Dynamic Obstacle Environments",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528458",
          "name": "Kim, Dabin",
          "affiliation": "Gachon University"
        },
        {
          "id": "528675",
          "name": "Lee, Youngmin",
          "affiliation": "Gachon University"
        },
        {
          "id": "512223",
          "name": "Seo, Jeonghee",
          "affiliation": "Gachon University"
        },
        {
          "id": "484521",
          "name": "Choi, Andrew Jaeyong",
          "affiliation": "Gachon University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a feasibility study of failure-aware LLM-DWA replanning for mobile robot navigation in dynamic obstacle environments. Existing LLM-DWA navigation has shown promise in static maze-like settings, but moving obstacles can invalidate initially generated waypoints and cause local planners to oscillate, time out, or fall into local-minimum states. To address this problem, we propose an event-triggered replanning strategy that monitors progress stagnation, low-speed behavior, and repeated recovery actions, while using a replanning cooldown to avoid excessive LLM calls. New LLM-generated waypoints are requested only when persistent local navigation failure is detected. The proposed method is evaluated in a dynamic maze with three moving obstacles and compared with a classical ROS-based navigation baseline, one-shot LLM-DWA, and fixed-periodic LLM-DWA. The baselines exhibit distinct failure modes, including start-stage planning collapse, stale waypoint execution, excessive replanning, and delayed timeout behavior. In contrast, the proposed strategy achieves the highest observed success rate of 5/10. The best run reached the goal with a 71.552 m path length, 436.315 s navigation time, three LLM calls, and two replanning events. These results indicate that selective failure-aware replanning can extend LLM-DWA navigation toward dynamic obstacle scenarios, although robust success in all trials remains future work.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_09"
    },
    {
      "id": "ThPo5P.10",
      "paperId": "628",
      "title": "Preliminary Results of the Dual-GNSS RTK/MEMS-IMU Fusion Positioning Algorithm Using Low-Cost Sensors",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "531761",
          "name": "Han, Joong-hee",
          "affiliation": "DGIST"
        },
        {
          "id": "531786",
          "name": "Park, Chi-ho",
          "affiliation": "DGIST"
        },
        {
          "id": "531787",
          "name": "Yun, Sanghun",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control"
      ],
      "abstract": "Traditional RTK technology has inaccurate positioning accuracy in environments with poor GNSS signals, and MEMS-IMU magnetometers are susceptible to electromagnetic interference. To overcome these limitations, we developed the dual-GNSS RTK/MEMS-IMU fusion positioning algorithm. This algorithm is implemented with a 15-dimensional loosely coupled Extended Kalman Filter (EKF). The EKF models sensor biases as first-order Gauss-Markov processes and incorporates updates: magnetometer yaw every 0.5 s, GNSS-RTK position/velocity every 0.2 s, and Dual-GNSS RTK yaw every 1 s. A dedicated multi-sensor device featuring a Unicore UM982 module and an Xsens MTi-1 sensor was fabricated for validation. Experimental results from a straight driving trajectory demonstrate centimeter-level precision, yielding a horizontal Root Mean Square Error (RMSE) of 0.03 m and a vertical RMSE of 0.01 m.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_10"
    },
    {
      "id": "ThPo5P.11",
      "paperId": "654",
      "title": "Real-Time Implementation and Shallow-Water Field Validation of DVL-Based Dead Reckoning for Unmanned Surface Vehicles",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "194161",
          "name": "Lee, Yoongeon",
          "affiliation": "Korea Research Institute of Ships & Ocean Engineering"
        },
        {
          "id": "532072",
          "name": "Park, Hansol",
          "affiliation": "Korea Research Institute of Ships and Ocean Engineering"
        },
        {
          "id": "532099",
          "name": "Pyo, Chunseon",
          "affiliation": "KRISO"
        },
        {
          "id": "253282",
          "name": "Kim, Kihun",
          "affiliation": "KRISO"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents the real-time implementation and field validation of a dead reckoning (DR) method for unmanned surface vehicles (USVs) that relies solely on a Doppler velocity log (DVL) under GNSS-denied conditions. GNSS is used only during an initial 60-s window, in which the heading offset is estimated as the circular mean of the differences between the compass heading and the GNSS course; thereafter, the position is propagated from the DVL bottom-track velocity and the corrected heading. The onboard Robot Operating System (ROS) software performs validity checking, zero-order hold, and median-absolute-deviation (MAD)-based outlier rejection in real time. Across nine field datasets (0.44–1.75 km) acquired in shallow water near Jebu Island, Korea, the filtered DR reduced the position error relative to the raw integration in every dataset, with a final error of 1.1–11.3% of the distance traveled. In the worst case the estimated trajectory was rotated as a whole, indicating that the residual error is dominated by compass heading error.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_11"
    },
    {
      "id": "ThPo5P.12",
      "paperId": "666",
      "title": "P-VIO: Prediction-Based Visual-Inertial Odometry for Visual-Degraded Situations",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532233",
          "name": "Hwang, Donghyeon",
          "affiliation": "DGIST"
        },
        {
          "id": "228442",
          "name": "Lee, Seong-Min",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control"
      ],
      "abstract": "Visual-inertial odometry (VIO) provides accurate localization for unmanned aerial vehicles (UAVs), but its performance can degrade significantly when visual measurements become unreliable because of camera blockage, featureless scenes, illumination changes, or motion blur. This paper presents a prediction-based VIO framework that improves UAV localization during temporary visual degradation. The proposed method integrates a motion prediction prior into the backend optimization of VINS-Fusion. A visual degradation detection module evaluates the stability of feature tracking, the number of tracked features, and variations in pixel intensity to classify the current visual condition as either severe or partial degradation. According to the detected degradation level, the proposed framework adaptively adjusts the contribution of visual and prediction constraints. The conventional VINS-Fusion optimization consists primarily of marginalization, inertial measurement unit (IMU), and visual residual terms. In the proposed method, an additional prediction residual term is introduced to support localization when visual constraints become weak or unavailable. The prediction module estimates future accelerations from recent inertial measurements and uses them to predict the corresponding position and velocity states. The proposed framework is evaluated on five EuRoC sequences under four-second visual blackout conditions and compared with ORB-SLAM3 and VINS-Fusion. Experimental results demonstrate that the proposed method reduces localization error and maintains more stable trajectory estimation during visual degradation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_12"
    },
    {
      "id": "ThPo5P.13",
      "paperId": "232",
      "title": "A Feasibility-Boundary Heuristic for Real-Time Berth Allocation and Crane Assignment in Automated Container Terminals",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526136",
          "name": "Kim, Yerin",
          "affiliation": "Pusan National University"
        },
        {
          "id": "513889",
          "name": "Bae, Hyerim",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Industrial Applications of Control",
        "Information and Networking"
      ],
      "abstract": "This study addresses the berth allocation and crane assignment problem (BACAP) in automated container terminals. BACAP jointly determines the berthing position, berthing time, and quay crane assignment for vessels. Frequent disruptions, such as vessel delays and unscheduled arrivals, can invalidate existing schedules. A feasible revised plan must therefore be generated within minutes for replanning. To address this requirement, this study proposes a feasibility-boundary heuristic based on an optimization-to-decision transformation. The method poses a simple Yes/No question: whether a target number of vessels can be assigned within a given waiting-time bound while satisfying constraints on berthing position, berthing time, and crane resources. This structure narrows the search space to operationally feasible candidates aligned with the target assignment level. This allows the method to derive a high-quality revised schedule with reduced vessel waiting time and fewer required time of departure (RTD) violations. Experiments using real port data show that the proposed method maintains a high assignment rate, short computation time, and scalable performance, while remaining close to a Gurobi-based mixed-integer linear programming (MILP) reference on small instances. These results demonstrate that the proposed heuristic provides a fast and reliable approach to berth and crane replanning under operational disruptions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_13"
    },
    {
      "id": "ThPo5P.14",
      "paperId": "483",
      "title": "Development of a Multimodal Robotic Measurement System for Curved Surfaces Using Dual RGB-D Cameras and Adaptive Laser Sampling",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "409443",
          "name": "Park, Sejun",
          "affiliation": "Gyeongsang National University"
        },
        {
          "id": "409442",
          "name": "Baik, Jaehyeon",
          "affiliation": "Gyeongsang National University"
        },
        {
          "id": "528276",
          "name": "Farooq, Sehar Shahzad",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "220163",
          "name": "Lee, Hosu",
          "affiliation": "Gyeongsang National University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Industrial Applications of Control",
        "Robotic Applications"
      ],
      "abstract": "Precision surface measurement is a key quality control process in manufacturing, used to verify whether curved components meet their design intent. Conventional approaches, such as manual inspection and fixed metrology equipment are limited in repeatability and automation, or require dedicated jigs and setup procedures whenever the target geometry or pose changes, reducing their flexibility for small-batch, high-mix production. Robot-based automated approaches have been proposed to address these issues but typically rely on predefined inspection surfaces or CAD models, making it difficult to apply when the target pose varies or prior geometric information is insufficient. In this study, we propose a multimodal surface measurement system that combines two RGB-D cameras, a six-degree-of-freedom robot arm, and a laser displacement sensor to integrate global perception with local precision measurement. The system first reconstructs the coarse three-dimensional geometry using two RGB-D cameras, and then performs local precision measurement based on Gaussian process adaptive sampling. To evaluate the feasibility of the system, a pilot test was conducted on a dome-shaped specimen with positive double curvature. The experimental results show that the proposed system achieved a mean absolute distance of 0.173 ± 0.018 mm with respect to the raster-scanned reference surface using only 35.3 sampling points on average. In future work, RGB-D depth data will be directly incorporated into the Gaussian process model further improving measurement efficiency.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_14"
    },
    {
      "id": "ThPo5P.15",
      "paperId": "524",
      "title": "Inpainted 3D Gaussian Splatting for Robot Simulation",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525708",
          "name": "Sim, Seonghwan",
          "affiliation": "Handong Global University"
        },
        {
          "id": "525754",
          "name": "Kim, Hayoung",
          "affiliation": "Handong Global University"
        },
        {
          "id": "525744",
          "name": "Park, Seoyoun",
          "affiliation": "Handong Global University"
        },
        {
          "id": "300170",
          "name": "Hwang, Sung Soo",
          "affiliation": "Handong Global University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Multimedia Systems",
        "Robotic Applications"
      ],
      "abstract": "3D Gaussian Splatting(3DGS) has recently attracted significant attention in the fields of robotics and simulation due to its ability to provide high-quality real-time rendering. However, conventional 3DGS reconstructs objects only from observed regions, resulting in limitations where unobserved areas, such as the rear or bottom surfaces of objects, remain incomplete or hollow. These structural deficiencies cause missing regions to become visible when objects are moved or rotated. The purpose of this study is to express an object that is structurally complemented in a simulator environment based on 3DGS. To this end, we propose an object-centered 3DGS complementary pipeline. The proposed method first performs segmentation on objects in the scene and then inpainting to generate surface information for the non-observed area. After that, the generated Gaussian model and the object Gaussian model are matched to form a more complete three-dimensional structure. As a result of the experiment, the proposed method effectively alleviated the hole and structural defect problem in the existing 3DGS when moving objects, and confirmed that the real-time rendering performance and visual quality of the original 3DGS can also be maintained.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_15"
    },
    {
      "id": "ThPo5P.16",
      "paperId": "593",
      "title": "Multibody Co-Simulation-Based Reinforcement Learning Framework for Vibration-Aware Transfer Motion of a Linear Motor Stage",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528779",
          "name": "Yang, Hyewon",
          "affiliation": "Korea University of Technology and Education"
        },
        {
          "id": "537274",
          "name": "Hong, Joo-Pyo",
          "affiliation": "KOREATECH"
        },
        {
          "id": "525082",
          "name": "Sung, Yeol Hun",
          "affiliation": "KOREATECH"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents a multibody co-simulation-based reinforcement learning framework for vibration-aware transfer motion of a linear motor stage. A MATLAB/Simulink learning agent is coupled with a RecurDyn multibody dynamics plant through the GRDClient interface, enabling synchronized exchange of control inputs and physical states. The agent generates jerk commands that are integrated into acceleration commands and applied to the plant as a driving force. The intended motion objective is to achieve fast transfer while considering a prescribed limit on the base-frame velocity. In the present implementation, violations of this limit are handled through a fixed-weight reward penalty rather than a hard constraint mechanism, and strict constraint satisfaction is therefore not guaranteed. Preliminary simulation results show that the trained policy reaches the target position; however, the base-velocity limit is exceeded during the transient motion and the response subsequently decays within the prescribed band. Accordingly, the results are interpreted as a preliminary demonstration of the proposed co-simulation learning framework rather than as validation of a strictly constraint-satisfying controller. The framework provides a simulation-based basis for further development of explicit constraint-handling strategies and experimental validation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_16"
    },
    {
      "id": "ThPo5P.17",
      "paperId": "12",
      "title": "Effects of Lower Extremity Constraint-Induced Movement Therapy Using Piston Device for Leg Joint Walking Function Improvement and Discrepancy of Motor Imagery Recognition",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "522281",
          "name": "Okuda, Shosaku",
          "affiliation": "Meiji University of Integrative Medicine"
        },
        {
          "id": "207663",
          "name": "Tanabe, Hirofumi",
          "affiliation": "Shonan University of Medical Sciences"
        },
        {
          "id": "522293",
          "name": "Tanabe, Hiroshi",
          "affiliation": "Tokyo Metropolitan Fuchu Rehabilitation Center for the Disabled"
        },
        {
          "id": "522291",
          "name": "Takata, Yuichi",
          "affiliation": "Hokkaido Bunkyo University"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Biomedical Instruments and Systems",
        "Control Theory and Applications"
      ],
      "abstract": "This study biomechanically analyzed gait efficiency fluctuations and long-term changes in walking functions and maximum step length (MSL) in seven community-dwelling patients with post-stroke hemiplegia. Participants received Lower Extremity Constraint-induced Movement Therapy (LE-CIMT) using a piston device for leg joint treatment. Evaluations, including Fugl-Meyer Assessment (FMA), 10-Meter Walking Test (10MWT), Time Up and Go Test (TUG), and MSL, were conducted at baseline, pre-intervention, post-intervention (2 weeks), and follow-up (16 weeks). Three-dimensional gait analysis at baseline and post-intervention calculated joint angles, moments, and strength. Results showed significant post-intervention increases in hip extension angle, ankle dorsiflexion angle, and ankle plantar flexion moment/strength on the paralyzed side, indicating improved propulsive force. Consequently, 10MWT and TUG scores improved, with effects lasting at least 16 weeks. Notably, the discrepancy between predicted and measured MSL values increased after intervention. In conclusion, LE-CIMT using a piston device contributes to long-term walking function improvement, though a delayed recognition of functional gains may occur.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_17"
    },
    {
      "id": "ThPo5P.18",
      "paperId": "566",
      "title": "Preliminary Study on Gait Posture Estimation System Using IoRT Walker and Digital Human Model",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528489",
          "name": "Nakamura, Atsuya",
          "affiliation": "Osaka Electro-Communication University"
        },
        {
          "id": "463825",
          "name": "Aoyama, Hiroki",
          "affiliation": "Aino University"
        },
        {
          "id": "109107",
          "name": "Jeong, Seonghee",
          "affiliation": "Osaka Electro-Comunication University"
        },
        {
          "id": "361901",
          "name": "Ogawa, Katsushi",
          "affiliation": "Osaka Electro-Communication University"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Sensors and Signal Processing",
        "Human-Robot Interaction"
      ],
      "abstract": "With the rapid aging of society, gait assessment has become increasingly important for rehabilitation and fall prevention. Conventional gait analysis methods, such as motion capture systems and RGB-D cameras, can provide detailed motion information but often require expensive equipment and dedicated environments. To address these limitations, we have developed an Internet of Robotic Things (IoRT) care-walker equipped with load cells, inertial measurement units, and rotary encoders. The system detects gait events, including heel contact and toe-off, and calculates gait parameters such as stride length and gait cycle. This study proposes a method for estimating gait posture using only sensor data obtained from the IoRT care-walker. A human digital model is constructed from gait events, gait parameters, upper-limb load information, and walker position data. Upper-body and foot positions are estimated from these measurements, and joint positions are calculated using a human link model with geometric constraints. The proposed framework is also integrated with an XR-based visualization system to realize a gait digital twin. This paper describes the system architecture and the method for constructing the human digital model.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_18"
    },
    {
      "id": "ThPo5P.19",
      "paperId": "626",
      "title": "Regulation of Stepping Speeds Via Audio-Visual Cueing, Pivoting Neuromuscular Control, and Eccentric Demands: Implications for Task-Specific Robotic Rehabilitation",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "531765",
          "name": "Park, Kyung-Mi",
          "affiliation": "Korea Institute of Science and Technology"
        },
        {
          "id": "332834",
          "name": "Kim, Olga Valerevna",
          "affiliation": "Korea Institute of Science and Technology"
        },
        {
          "id": "332832",
          "name": "Gemechu, Duguma Teshome",
          "affiliation": "Korea Institute of Science and Technology, University of Science and Technology"
        },
        {
          "id": "212919",
          "name": "Lee, Song Joo",
          "affiliation": "Korea Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Maximizing locomotor recovery requires a strategic focus on training parameters such as the intensity and variability of stepping practice. This study investigated the regulation of stepping speeds and neuromuscular exertion through a task-specific paradigm integrating audio-visual cueing, pivoting neuromuscular control, and eccentric demands. Twenty-three participants performed stepping tasks under three distinct conditions: (1) Muscle Power (MP) mode, guided stepping with audio-visual cueing at 100% and 120% of their baseline speed; (2) Neuromuscular Control (NC) mode, which integrates transverse-plane pivoting control into the MP condition; and (3) Eccentric Control (EC) mode, involving stepping under additional biomechanical loading (e.g., squat posture). Significant negative correlations were observed between the 10-Meter Walk Test (10MWT) and stepping speeds (r = -0.65 to -0.68, p < 0.05), demonstrating task-specific associations with overground walking ability. Furthermore, the audio-visual cueing precisely modulated stepping speeds between target levels (p < 0.05). Interestingly, the EC condition elicited significant speed increases that lacked correlation with the 10MWT, appearing to reflect condition-specific speed regulation in response to increased eccentric demands rather than functional walking performance. Ultimately, these findings demonstrate that this comprehensive paradigm provides the essential intensity and task variability required to safely modulate neuromuscular exertion, highlighting its potential for task-specific robotic rehabilitation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_19"
    },
    {
      "id": "ThPo5P.20",
      "paperId": "664",
      "title": "RAG-VLM-Based Novice Physical Therapist Coaching System During Proprioceptive Neuromuscular Facilitation Upper Limb D1 Pattern",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "465780",
          "name": "Kim, Sunkyung",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "312608",
          "name": "Lee, Junyeong",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "532199",
          "name": "Kim, Sungnyoung",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "106386",
          "name": "Yoon, Jungwon",
          "affiliation": "Gwangju Institutue of Science and Technology"
        }
      ],
      "keywords": [
        "Rehabilitation Robot",
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Proprioceptive Neuromuscular Facilitation (PNF) upper limb pattern is widely used to improve activities of daily living after a stroke. However, it has complex movement patterns; thereby, novice-led sessions may result in inappropriate posture control or resistance application. Existing rehabilitation monitoring systems mainly focus on detecting task completion or postural errors, providing limited clinical interpretation and insufficient corrective rationale. This study proposes a PNF upper limb D1 pattern coaching system by utilizing 3D skeleton and force data for Retrieval-Augmented Generation Vision Language Model (RAG-VLM) based therapist feedback. Based on sensor data, the system quantifies joint range of motion, trajectory, compensatory motion, and force level. These metrics and visual information are integrated with rehabilitation-domain knowledge through an RAG-VLM to generate personalized, evidence-grounded corrective feedback. A pilot investigation with non-expert participants based on a PNF upper limb D1 resistive training session showed the potential of the developed system.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_20"
    },
    {
      "id": "ThPo5P.21",
      "paperId": "48",
      "title": "Control-Oriented Design and CFD-Based Evaluation of a Bio-Inspired UAV",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "524799",
          "name": "Kwon, Seongjin",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "184156",
          "name": "Choi, Keun Ha",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "126125",
          "name": "Kim, Kyung-Soo",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control"
      ],
      "abstract": "A control-oriented conceptual design and preliminary CFD-based evaluation are presented for a bio-inspired fixed-wing unmanned aerial vehicle (UAV) with whole-wing actuation. Unlike conventional fixed-wing UAVs that rely on local hinged control surfaces, the proposed platform uses the main wings as movable aerodynamic effectors through wing angle-of-attack (AoA) and backsweep variation. The present study focuses on symmetric wing motions to examine the baseline lift-, drag-, and pitch-moment responses of the architecture. A rigid CFD analysis was conducted using Autodesk CFD at a freestream velocity of 25 m/s. Under symmetric wing AoA variation, the computed lift-direction force increased from 13.81 N at 0 deg to 54.92 N at 12 deg, exceeding the vehicle weight reference between 6 deg and 8 deg. The pitching moment also became more negative with increasing AoA, indicating an increased nose-down moment tendency under the adopted sign convention. Symmetric backsweep produced a weaker drag-direction response, with an approximately 4.0% reduction in Fx from 0 deg to 30 deg and a small non-monotonic variation near 18 deg. These results indicate that wing AoA is the primary lift- and moment-related input in the present configuration, whereas backsweep acts as a secondary aerodynamic modulation input.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_21"
    },
    {
      "id": "ThPo5P.22",
      "paperId": "50",
      "title": "Kinematic and Dynamic Model of a Delta Robot with Linear Actuators",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "522217",
          "name": "Vosahlik, David",
          "affiliation": "Rockwell Automation"
        },
        {
          "id": "522296",
          "name": "da Silva, Aderiano",
          "affiliation": "Rockwell Automation, Inc"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "The complete kinematic and dynamic modeling of a three-degree-of-freedom Delta robot driven by linear actuators is presented in this paper. Both inverse and forward kinematic equations are derived from the geometric constraints of this parallel mechanism. Two complementary approaches for computing the Jacobian matrices are developed: a derivative-based approach using partial differentiation of the kinematic chain and a constraint-equation-based approach adapted from existing methods for rotary-actuated Delta robots. The equations of the inverse dynamic model are formulated using the virtual work principle under standard simplifying assumptions, including lumped link masses and neglected joint friction. The complete set of derived equations - covering kinematics, velocity mappings, accelerations, and actuator forces - is validated against a high-fidelity Simscape Multibody simulation model constructed from a CAD model of a commercial Delta robot. The excellent agreement between the analytical model and the multibody simulation validates the proposed methods. These models can be directly applied in model-based control design, trajectory planning, and real-time simulation of Delta robots with linear actuators.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_22"
    },
    {
      "id": "ThPo5P.23",
      "paperId": "571",
      "title": "Design of DGIST PRIME: A Parallel-Linkage Quadruped Robot with Intelligent Mechanism-Aware Encoding",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "378077",
          "name": "Hong, Jinsong",
          "affiliation": "DGIST"
        },
        {
          "id": "465456",
          "name": "Kim, Jangho",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        },
        {
          "id": "378738",
          "name": "Lee, Jihwan",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        },
        {
          "id": "528692",
          "name": "Kim, Dohoon",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology (DGIST)"
        },
        {
          "id": "528654",
          "name": "Lee, Jaechan",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology (DGIST)"
        },
        {
          "id": "129982",
          "name": "Oh, Sehoon",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents DGIST PRIME, a 25 kg parallel-linkage quadruped robot. PRIME stands for Parallel-Link Robot with Intelligent Mechanism-Aware Encoding, reflecting that the learning and control system explicitly encodes the robot's physical linkage mechanism into the joint-observation, control, and reward coordinates. PRIME uses parallel-linkage legs in which the knee actuator is placed near the hip side. This design reduces distal leg inertia and swing load, which is beneficial for fast swing motion, crouching, takeoff, landing, and aggressive acceleration. However, in a parallel-linkage leg, the virtual serial joint coordinate q_s used by the simulator and policy is not identical to the physical parallel actuator coordinate q_p. Because the proposed knee linkage uses a parallelogram-like link arrangement with equal link lengths, the simplified one-leg model gives the coupled knee-side coordinate as q_p2 = q_s1 + q_s2. Thus, even if q_s1 and q_s2 are individually regularized in the serial space, the physical coordinate q_p2 can repeatedly approach the parallel-linkage ROM boundary. To address this coordinate mismatch, the proposed learning framework transforms serial joint states into the parallel coordinate before constructing the joint-related observation, evaluating the low-level PD tracking error, and computing the ROM penalty. Sagittal ROM analysis shows that q_p2 can mechanically approach pi rad; therefore, a conservative upper threshold of 3.0 rad is used in simulation. Under the same command and the same ROM penalty weight, the serial-space penalty and the proposed parallel-space penalty are compared in a start-stop task. The results show that the parallel-space penalty preserves comparable velocity tracking while keeping the learned trajectory farther from the physical parallel-coordinate ROM boundary. Hardware rollout with rapid acceleration and abrupt deceleration further verifies that the learned policy remains inside the conservative parallel-space ROM threshold.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_23"
    },
    {
      "id": "ThPo5P.24",
      "paperId": "85",
      "title": "ALACER: Energy-Efficient Blind Locomotion Via Dynamic Reward Modulation of Inferred Terrain Context",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "460108",
          "name": "Kwon, Sejin",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "319663",
          "name": "Lee, Seungjae",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "525444",
          "name": "Lee, Carroll Eunbin",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Reinforcement learning-based quadrupedal locomotion controllers have recently achieved strong traversability over rough terrain by relying only on proprioception. However, without exteroception, these controllers cannot observe upcoming terrain in advance. As a result, they tend to learn conservative gaits that maintain high swing-foot clearance and large actuation margins, even when the underlying terrain-robot interaction becomes locally predictable. This conservative behavior improves robustness against unexpected contacts, but can impose an unnecessary energetic cost during less demanding locomotion phases. We present Adaptive Locomotion with Attuned Context and Energy Regulation (ALACER), a reward modulation framework for improving the energy efficiency of blind locomotion. Instead of explicitly classifying terrain types, ALACER estimates the short-window consistency of the latent context inferred from proprioceptive history. This consistency cue modulates the torque penalty and the desired swing-foot clearance. Consistent contexts promote a low-clearance, energy-efficient gait, whereas inconsistent contexts caused by terrain transitions or persistent contact disturbances relax the additional torque penalty and preserve robust traversal behavior. Simulation results show that ALACER reduces mean joint power by 23.5% on flat terrain compared with the baseline. The ablation study further confirms the benefit of the proposed modulation, with ALACER reducing the cost of transport (CoT) by 14.8% on the uphill-to-plane terrain relative to the baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_24"
    },
    {
      "id": "ThPo5P.25",
      "paperId": "113",
      "title": "Enhancing Proprioceptive Bipedal Locomotion through a Dual-Critic Framework and Kinematic Prior",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525605",
          "name": "Chen, Sheng",
          "affiliation": "Institute of Automation, Chinese Academy of Sciences"
        },
        {
          "id": "370364",
          "name": "Chen, Ziyu",
          "affiliation": "Institute of Automation, Chinese Academy of Sciences"
        },
        {
          "id": "370608",
          "name": "Zhang, Chiyu",
          "affiliation": "Institute of Automation, Chinese Academy of Sciences"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Deep reinforcement learning has demonstrated remarkable success in continuous bipedal locomotion, yet formulating effective reward functions often leads to severe gradient interference. To resolve the inherent scale conflicts between dominant survival objectives and delicate kinematic tracking, we introduce a synergistic framework that combines a parameterized gait template with a Dual-Critic Actor-Critic architecture. Rather than treating these as isolated solutions, our approach leverages the gait template to provide physically feasible reference motions without motion capture , while explicitly utilizing the dual critics to decouple the competing reward signals. Validations in simulation and on the real robot demonstrate that this integrated methodology significantly improves natural gait generation and disturbance robustness compared to baseline approaches.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_25"
    },
    {
      "id": "ThPo5P.26",
      "paperId": "115",
      "title": "Heuristic Region Guided Online Motion Planning for Robotic Arms in Dynamic Environments",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525608",
          "name": "Feng, Hanyu",
          "affiliation": "Beijing University of Posts and Telecommunications"
        },
        {
          "id": "284689",
          "name": "Zhang, Shiyu",
          "affiliation": "Beijing University of Posts and Telecommunications"
        },
        {
          "id": "525609",
          "name": "Wang, Pei",
          "affiliation": "Bejing University of Posts and Telecommunications"
        },
        {
          "id": "525611",
          "name": "Wu, Hongyu",
          "affiliation": "Beijing University of Posts and Telecommunications"
        },
        {
          "id": "525622",
          "name": "Liu, Chong",
          "affiliation": "Beijing University of Posts and Telecommunications"
        },
        {
          "id": "525615",
          "name": "Wang, Dihan",
          "affiliation": "Beijing University of Posts and Telecommunications"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Obstacle avoidance for robotic arms in dynamic environments relies on online motion planning, where the planner must search efficiently under moving obstacles while maintaining collision safety and continuous execution. This paper proposes HRG-RRT, a heuristic-region-guided online planner for a robotic arm. Point-cloud observations are used to predict task-space regions that are likely to support feasible connections between the current end-effector state and the goal. The predicted region is not treated as an executable trajectory; it only biases sampling in a time-aware RRT planner, while IK feasibility and whole-arm collision checking determine whether candidate motions are valid. To make the learned prior usable during replanning, HRG-RRT combines heuristic-region repair, mixed sampling, multi-subtree bridging, failed-region feedback, and execution-aware fallback. In PyBullet experiments with 50 trials per scene, HRG-RRT shows higher success rates than standard RRT in the static, dynamic, and mixed scenes. It also obtains shorter average task-space paths in all scenes, with lower execution time in the static and mixed scenes and comparable execution time in the dynamic scene.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_26"
    },
    {
      "id": "ThPo5P.27",
      "paperId": "148",
      "title": "Per-Joint Adaptive Update Intervals for Smooth Action Chunk Execution in Robot Manipulation",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525761",
          "name": "Kim, Jeong Yong",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "227322",
          "name": "Abbasi, Saad Jamshed",
          "affiliation": "Pusan National University"
        },
        {
          "id": "525769",
          "name": "Kumar, Abhishek",
          "affiliation": "Korea Institute of Machinery and Material"
        },
        {
          "id": "414382",
          "name": "Sanaullah, Sanaullah",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "124478",
          "name": "Han, Byung-Kil",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "185961",
          "name": "Park, Dongil",
          "affiliation": "Korea Institute of Machinery and Materials (KIMM)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Action chunking has become a common strategy for vision-language-action (VLA) robot policies because it enables temporally consistent robot commands while allowing policy inference to run at a lower rate than the low-level control loop. However, the execution of action chunks introduces a tradeoff between smoothness, responsiveness, and task duration. In this paper, we present an execution-side adaptive action chunking method for closed-loop robot manipulation. First, we formulate overlapping action chunks and introduce a recursive multi-chunk smoothing rule that blends newly predicted chunks with previously accumulated command trajectories. Second, we propose a per-joint adaptive update interval based on the within-chunk action variance, allowing each joint to adopt new predictions at a different rate according to its predicted motion. The method is evaluated in an Isaac Sim–GR00T–ROS 2 closed-loop pipeline using a simulated AI Worker FFW-SG2 robot performing a pick-and-place task. Experiments with a fixed action horizon of H = 16 compare update intervals of R = 16, R = 8, and R = 2, as well as the proposed adaptive interval. The results show that smaller update intervals reduce tracking error but increase task duration, while the adaptive method provides an intermediate tradeoff without modifying the underlying VLA policy.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_27"
    },
    {
      "id": "ThPo5P.28",
      "paperId": "155",
      "title": "Hierarchical Robust Control of Winch-Tethered Quadrotors Via Adaptive Bias Compensation and Distance-Based Winch Regulation",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "450905",
          "name": "Jung, Jungyo",
          "affiliation": "KAIST"
        },
        {
          "id": "435899",
          "name": "Han, SooJean",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Autonomous Vehicle Systems",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes an implementation-oriented control framework for a winch-tethered UAV system under tether-induced disturbances. The architecture follows a cascaded hierarchy: an outer translational loop generates a robust acceleration command, a thrust/attitude reference generator maps it into a collective thrust and attitude setpoint, and a kinematic attitude-reference layer shapes the setpoint provided to the PX4 attitude/rate cascade. In parallel, a distance-based winch controller regulates tether length using only the relative UAV--UGV distance, without explicit tension measurements. Unlike a torque-level design, the proposed implementation does not assume direct access to body torques; instead, residual attitude-tracking errors of the cascade are modeled as bounded kinematic mismatches. Under bounded reference signals, bounded tether disturbances, and bounded attitude residuals, we establish uniform ultimate boundedness of the attitude-reference and translational tracking errors through a Lyapunov-based analysis. The controller is implemented in PX4 SITL and validated in Gazebo simulation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_28"
    },
    {
      "id": "ThPo5P.29",
      "paperId": "227",
      "title": "Energy-Efficient Walking Control of a Bipedal Humanoid Robot Via Reinforcement Learning with a Human Gait-Inspired Reward Function",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "412127",
          "name": "Lee, Jong-Won",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "193164",
          "name": "Joe, Hyun-Min",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "387515",
          "name": "Sung, Jun-Hyuck",
          "affiliation": "Kyungpook National University, Daegu"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Energy efficiency is a critical challenge for bipedal humanoid robots operating under limited battery capacity in real-world environments. Conventional model-based controllers struggle to integrate energy optimization with gait generation, and existing deep reinforcement learning approaches rarely incorporate structured biomechanical knowledge into the reward design. This paper proposes a Proximal Policy Optimization (PPO)-based reinforcement learning framework with a phase-aware reward function inspired by human gait biomechanics to achieve energy-efficient forward walking of a 12-DOF bipedal humanoid robot. The proposed reward function detects the single-support phase (SSP) using a ground reaction force threshold and selectively activates five biomechanics-inspired reward terms: knee extension, hip pitch swing, step length, toe clearance, and ankle roll alignment. Training is conducted in NVIDIA Omniverse Isaac Sim with domain randomization applied to mass, posture, sensor noise, and disturbances to reduce the sensitivity of the policy to modeling error. Experiments on flat terrain at 1.0 m/s, evaluated over five independently trained policies with ten randomized 10 s trials each (50 rollouts), show that the proposed policy reduces the mean RMS joint torque by 17.4% and the absolute mechanical cost of transport by 15.5% compared to a stability-oriented baseline, while maintaining comparable command-tracking performance. These results demonstrate that structured biomechanical reward shaping is an effective strategy for energy-efficient bipedal locomotion.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_29"
    },
    {
      "id": "ThPo5P.30",
      "paperId": "283",
      "title": "CASM: Control Authority-Aware Safety Monitoring for Residual Reinforcement Learning in Robot Manipulation",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525918",
          "name": "Kim, Jongkyu",
          "affiliation": "Sungkyunkwan University, Samsung Institute of Technology, Samsung Electronics"
        },
        {
          "id": "319832",
          "name": "Kuc, Tae-Yong",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "Residual reinforcement learning (RL) adds learned corrections to a sampling-based motion planner, so a robot can adapt as its environment changes. These corrections, however, become unreliable in out-of-distribution (OOD) environments not seen during training. Existing MC-Dropout-based methods act conservatively whenever the action uncertainty σ2 is high. But high uncertainty does not necessarily mean danger. In our experiments, this uncertainty-only rule reaches only 23.5% Precision, so 76.5% of its interventions are unnecessary. To address this, we present CASM, which combines uncertainty (σ2) with control authority (Capacity). Capacity indicates whether a collision-avoiding action is available within the robot’s bounded action space. When Capacity is sufficient, CASM keeps the RL policy in control even under high uncertainty, and switches to an OMPL-based planner only when high uncertainty and low Capacity occur together. On a simulated UR10e manipulator, CASM raises Precision from 23.5% to 94.1% at 100% Recall and reaches a 0% collision rate in our experimental environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_30"
    },
    {
      "id": "ThPo5P.31",
      "paperId": "300",
      "title": "Staged Reinforcement Learning for Collision-Aware Goal Reaching of a 6-DOF Robot Manipulator",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "348982",
          "name": "Won, Chanhee",
          "affiliation": "Korea Institue of Industrial Technology"
        },
        {
          "id": "527732",
          "name": "Lee, Hyeokjin",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "348991",
          "name": "Lee, Hye Jin",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "Robotic manipulators operating in shared or constrained environments must reach target poses while avoiding collisions with their own structure and surrounding obstacles. This paper presents a staged reinforcement learning framework for collision-aware goal reaching of a 6-DOF robot manipulator. The proposed approach decomposes the learning process into progressive training stages, starting from a simplified 3-DOF reaching task and extending toward full 6-DOF motion control. To support safe motion generation, the robot body is represented using discretized geometric points, enabling distance-based evaluation of self-collision and obstacle proximity during training. The reward function integrates target-reaching accuracy, collision penalties, near-collision avoidance, and motion smoothness to guide the policy toward feasible and stable behavior. In addition, a multi-agent structure is considered, where different joint groups can be trained and controlled in a coordinated manner. Preliminary results show that staged learning can improve training stability and help the robot acquire collision-aware reaching behavior in complex configurations. The developed framework provides a foundation for future physical AI systems that require autonomous, safe, and adaptive robot motion in dynamic environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_31"
    },
    {
      "id": "ThPo5P.32",
      "paperId": "344",
      "title": "Design of a Hybrid Manipulator Using Dual Electrohydraulic Actuators",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "523413",
          "name": "Lee, Jeonghun",
          "affiliation": "Korea University"
        },
        {
          "id": "146365",
          "name": "Cha, Youngsu",
          "affiliation": "Korea University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "This study presents an artificial arm that is based on a linkage joint, combining soft electrohydraulic actuators with a rigid linkage mechanism to substantially improve the amplification of angular motion. Soft electrohydraulic actuators exhibit a relatively limited range of linear displacement. Within this framework, the linkage joint transforms the limited linear displacement produced by the electrohydraulic actuators into a greatly amplified rotational motion. A maximum flexion angle of 103 degrees is achieved, which corresponds to an increase of roughly eight times compared to the system without a linkage mechanism. Notably, the hybrid actuator configuration markedly enhances cyclic stability while effectively reducing hysteresis behavior. A comprehensive series of experiments has been carried out to meticulously investigate the effects of various design and input parameters on motion and force performance. These findings highlight the considerable and encouraging potential that hybrid soft–rigid actuation systems possess for driving progress across a broad spectrum of robotic applications.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_32"
    },
    {
      "id": "ThPo5P.33",
      "paperId": "356",
      "title": "Optimal Design of Air Chamber to Improve Impact Strength of Permanent Magnet Connectors on Truss-Type Modular Robots",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "515371",
          "name": "Kim, Jaeyeol",
          "affiliation": "Hanyang Universeity"
        },
        {
          "id": "501060",
          "name": "Shin, WooSeong",
          "affiliation": "Hanyang University"
        },
        {
          "id": "502001",
          "name": "Go, Yohan",
          "affiliation": "Hanyang University"
        },
        {
          "id": "334282",
          "name": "Park, Inha",
          "affiliation": "Hanyang University"
        },
        {
          "id": "346521",
          "name": "Yoon, Hyeungyu",
          "affiliation": "Hanyang University"
        },
        {
          "id": "295034",
          "name": "Kim, SangGyun",
          "affiliation": "Hanyang University"
        },
        {
          "id": "527763",
          "name": "Lee, Hyeokjung",
          "affiliation": "Hanyang University"
        },
        {
          "id": "140339",
          "name": "Seo, TaeWon",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control"
      ],
      "abstract": "The connection mechanisms between neighboring modules are crucial subsystems in modular robots, and magnetic connectors have been proposed as an effective solution. They are widely utilized due to their ease of connection and mechanical simplicity. However, they have the disadvantage of a lower maximum tensile strength compared to connectors using rigid docking mechanisms. This limitation is critical, as modular robots are frequently subjected to impact forces during locomotion, reconfiguration, docking, and undocking. To address this issue, this study proposes a silicone air chamber structure designed to enhance the impact resistance of magnetic connectors while mitigating the degradation of the undocking capability caused by this increased resistance. Furthermore, we introduce an experimental evaluation method inspired by the Charpy impact test. Finally, because the proposed structure is too complex to evaluate through analytical methods alone, the Taguchi method is employed to optimize the four design parameters, ultimately yielding the optimal design values.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_33"
    },
    {
      "id": "ThPo5P.34",
      "paperId": "381",
      "title": "Reinforcement Learning-Based Comparison of Flat, Curved, and Active-Toe Feet for Humanoid Walking",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "513337",
          "name": "Chung, Yoon Seok",
          "affiliation": "Korea University"
        },
        {
          "id": "116455",
          "name": "Lim, Myo-Taeg",
          "affiliation": "Korea University"
        },
        {
          "id": "110832",
          "name": "Oh, Yonghwan",
          "affiliation": "Korea Institute of Science & Technology (KIST)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "This paper examines how foot morphology changes the gait learned by an end-to-end reinforcement-learning controller for humanoid walking. Flat, curved, and active-toe feet were modeled on the Unitree G1 platform and trained with the same learning framework. The flat and curved models share the same action and observation dimensions, whereas the active-toe model includes two additional toe joints and only minimal toe-related regularization. To make the effect of foot design visible during training, we introduced a Froude-number-based step-length reward that scales the target step length with the commanded speed. The trained policies were evaluated in MuJoCo sim-to-sim at several forward walking speeds. The results show that each foot design produces a different step-length pattern: the flat foot has large variability at low speeds, the curved foot becomes less repeatable at high speeds, and the active-toe foot maintains a comparatively narrow step-length distribution over most tested speeds. An additional active-toe policy trained without toe-specific rewards produced smaller steps while keeping low variance, suggesting that the toe morphology itself contributes to repeatable stepping, whereas toe-related rewards help the policy use the toe joint to generate longer steps.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_34"
    },
    {
      "id": "ThPo5P.35",
      "paperId": "393",
      "title": "Moving ZMP Trajectory Based on Walking Velocity for Humanoid Walking",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "480019",
          "name": "Yoo, Sookyoung",
          "affiliation": "Korea Institute of Science and Technology"
        },
        {
          "id": "412056",
          "name": "Kim, Taehyun",
          "affiliation": "Korea University, Korea Institute of Science and Technology (KIST)"
        },
        {
          "id": "116455",
          "name": "Lim, Myo-Taeg",
          "affiliation": "Korea University"
        },
        {
          "id": "110832",
          "name": "Oh, Yonghwan",
          "affiliation": "Korea Institute of Science & Technology (KIST)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Stable walking pattern generation for humanoid robots in real time remains a key challenge in robotics. The Linear Inverted Pendulum Model (LIPM) has been widely used for this purpose due to its computational efficiency. However, conventional analytical methods assume a constant Zero Moment Point (ZMP) velocity during the support phase, which restricts the ZMP trajectory to a simplified form and leads to increased Center of Mass (CoM) velocity fluctuation. To address this limitation, this paper proposes a Model Predictive Control (MPC)-based walking pattern generation method that subdivides the single support phase (SSP) into multiple subintervals, each assigned an optimized ZMP velocity, thereby generating a piecewise linear moving ZMP trajectory. The optimization problem is formulated for both the SSP and double support phase (DSP), with the ZMP velocity of each subinterval as decision variables. An analytical solution to the LIPM is derived to keep the computational cost low, making the method suitable for real-time control. Simulation results using the Unitree G1 humanoid robot confirm that the proposed method successfully generates moving ZMP trajectories based on walking velocity and effectively reduces CoM velocity fluctuation compared to conventional methods.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_35"
    },
    {
      "id": "ThPo5P.36",
      "paperId": "394",
      "title": "GPU-Parallelized Dual-Channel MPPI for Real-Time Bimanual Object Manipulation",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "479179",
          "name": "Jang, Yusun",
          "affiliation": "Korea University; Korea Institute of Science and Technology (KIST)"
        },
        {
          "id": "116455",
          "name": "Lim, Myo-Taeg",
          "affiliation": "Korea University"
        },
        {
          "id": "110832",
          "name": "Oh, Yonghwan",
          "affiliation": "Korea Institute of Science & Technology (KIST)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a GPU-parallelized Model Predictive Path Integral (MPPI) framework for real-time bimanual object manipulation. The framework independently samples contact-wrench rates and joint jerks and couples them through an acceleration-level kinematic consistency cost. Wrench sampling directly propagates object dynamics through the Newton--Euler equations without repeatedly reconstructing object motion from end-effector poses, while jerk sampling explicitly evolves joint-space states for joint-space objectives without online inverse kinematics. Object orientation is propagated on S^3 using an exact discrete quaternion update under piecewise-constant angular velocity, avoiding Euler-angle representation singularities. MuJoCo simulations with two Franka Emika FR3 manipulators evaluate 4096 trajectories in parallel at 300~Hz and demonstrate stable 6-DoF tracking, including a rapid 90^{circ} pitch maneuver for which an Euler-angle-based linear MPC baseline exhibits gimbal-lock-related degradation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_36"
    },
    {
      "id": "ThPo5P.37",
      "paperId": "400",
      "title": "Action Conversion: Enabling Gain-Invariant Deployment of RL-Based Humanoid Locomotion Policies",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "360684",
          "name": "Jang, Jaepil",
          "affiliation": "Korea Institute of Science and Technology (KIST), Seoul, South Korea"
        },
        {
          "id": "513337",
          "name": "Chung, Yoon Seok",
          "affiliation": "Korea University"
        },
        {
          "id": "480019",
          "name": "Yoo, Sookyoung",
          "affiliation": "Korea Institute of Science and Technology"
        },
        {
          "id": "110832",
          "name": "Oh, Yonghwan",
          "affiliation": "Korea Institute of Science & Technology (KIST)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Existing reinforcement learning (RL)-based locomotion policies are highly dependent on the low-level PD gains used during training, often requiring repeated controller tuning and policy retraining for sim-to-real deployment. In this paper, we propose an action conversion framework that enables locomotion policies to be transferred across different low-level controller settings without retraining. By converting policy actions to compensate for changes in controller gains while preserving the intended closed-loop behavior, the proposed method decouples hardware motor tuning from policy learning and improves policy reusability. The framework was validated through simulation and hardware experiments on the Unitree G1 humanoid robot using multiple controller configurations. Experimental results demonstrate that the proposed method maintains the intended control behavior and enables stable locomotion across different low-level controller settings. These results highlight the potential of the proposed framework to simplify controller adaptation and accelerate the sim-to-real transfer process for RL-based locomotion policies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_37"
    },
    {
      "id": "ThPo5P.38",
      "paperId": "59",
      "title": "Yaw Attitude Control of an Aerial Robot Via Piezoelectric Air Brakes Using a Magnetic-Levitation-Based Self-Learning System",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525083",
          "name": "Lee, Dong-Kyu",
          "affiliation": "Korea National University of Transportation"
        },
        {
          "id": "123043",
          "name": "Han, Jae-Hung",
          "affiliation": "KAIST"
        },
        {
          "id": "525082",
          "name": "Sung, Yeol Hun",
          "affiliation": "KOREATECH"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a self-learning approach to address current difficulties that arise when developing flight control systems using reinforcement learning (RL). We implemented a self-learning system that allows fully automated learning of an actual micro-aerial vehicle (MAV) in consideration of safety. This system utilizes an emulated free flight test environment based on magnetic levitation with a state-of-the-art RL algorithm directly to train the control policy of a physical MAV, thereby narrowing the reality gap associated with numerical modeling in simulation-based learning. Moreover, the trial-and-error-based learning procedure can be conducted during ground-emulated flight tests without serious safety concerns because the magnetic forces acting on the MAV are dynamically adjusted. The feasibility of the proposed approach was demonstrated experimentally; a MAV deliberately configured to have unstable yaw dynamics was challenged to use a self-control strategy to regulate its yaw attitude through piezoelectric air brakes without any prior knowledge. These results offer an alternative means of learning by demonstrating the successful solution of a demanding physical control problem.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_38"
    },
    {
      "id": "ThPo5P.39",
      "paperId": "430",
      "title": "Cable-Driven Transradial Robotic Prosthesis with Fully Actuated Wrist Using Parallel Mechanism",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "460892",
          "name": "Ahn, Ingyun",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "151511",
          "name": "Kang, Jiyeon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Rehabilitation Robot",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "This study presents the Cable-actuated Robotic Prosthesis with Parallel mechanism (CROPP), a transradial prosthetic system designed to reduce distal mass while providing fully actuated three-degree-of-freedom (3-DoF) wrist motion. Conventional multi-axis prosthetic wrists often require multiple actuators and transmission components near the distal joint, increasing weight, mechanical complexity, and user burden. To address the trade-off between dexterity and wearability, CROPP integrates a compact 3RRR parallel mechanism for flexion-extension (FE) and radial-ulnar deviation (RUD) with an independent central-shaft mechanism for pronation-supination (PS). The actuators are relocated proximally, and motion is transmitted through Bowden cables, reducing the mechanical load concentrated at the distal joint. The wearable prototype has a total mass of 380 g and provides angular ranges of ±60° for FE and RUD and ±90° for PS. Motion-capture-based experiments evaluated independent trajectory tracking under 0.5 Hz square, triangular, and sinusoidal reference inputs. Across all tested conditions, the mean absolute error ranged from 2.26° to 3.99°. The PS DoF exhibited the lowest overall tracking error, attributed to its direct 1:1 pulley transmission, simplified transmission path, and reduced cable slack. The FE and RUD responses showed slight phase delay and waveform deformation, mainly due to Bowden-cable friction, elastic deformation, and tension variation. These results demonstrate the feasibility of a lightweight, remotely actuated multi-DoF wrist architecture and indicate its potential for transradial prosthetic applications involving activities of daily living.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_39"
    },
    {
      "id": "ThPo5P.40",
      "paperId": "432",
      "title": "Risk-Adaptive Preferred-Clearance NMPCC for Obstacle Avoidance of Dual-Arm Manipulators",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528264",
          "name": "You, Jisoo",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "385232",
          "name": "Ban, Jaepil",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a risk-adaptive preferred-clearance extension of nonlinear model predictive cooperative control (NMPCC) for dual-arm manipulators. A preferred clearance is introduced and adjusted according to the obstacle risk level. As a result, the controller generates more conservative trajectories near high-risk obstacles such as humans, while allowing more efficient paths near lower-risk objects when the minimum safety boundary is still satisfied. Simulation results validate that, compared with the baseline NMPCC, the proposed method eliminated safe-zone violations in all scenarios and increased the minimum obstacle distance while maintaining target convergence.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_40"
    },
    {
      "id": "ThPo5P.41",
      "paperId": "466",
      "title": "A Lightweight Multimodal Haptic Glove for High-Fidelity Force and Stiffness Rendering",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "438087",
          "name": "Byun, Seunghwan",
          "affiliation": "Seoul National University"
        },
        {
          "id": "483751",
          "name": "Kim, Jaehun",
          "affiliation": "Seoul National University"
        },
        {
          "id": "491873",
          "name": "Lee, Hojun",
          "affiliation": "Seoul National University"
        },
        {
          "id": "294364",
          "name": "Sung, Eunho",
          "affiliation": "Seoul National University"
        },
        {
          "id": "101200",
          "name": "Park, Jaeheung",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": "In teleoperated robotic systems, accurate perception of physical interaction forces is required to prevent grasping failures and ensure manipulation stability. Current wearable haptic interfaces, nevertheless, exhibit an inherent structural dichotomy. Specifically, ungrounded cutaneous devices fail to provide joint-level kinesthetic cues, whereas conventional kinesthetic exoskeletons restrict natural dexterity due to their rigid kinematics. To address these limitations, an integrated hybrid haptic glove is developed based on a spatially decoupled sensory routing mechanism. At the distal phalanx, a lightweight tendon-driven module embedded with a force-sensing resistor (FSR) provides closed-loop cutaneous feedback, actively compensating for the inherent friction of the tendon routing. Concurrently, a compact solenoid-spring array mounted on the metacarpophalangeal (MCP) joint mechanically renders seven discrete levels of equivalent stiffness to simulate object compliance. Experimental evaluations validate the proposed architecture, demonstrating accurate closed-loop force tracking at the fingertip and linear force-displacement profiles across the discrete stiffness states. Consequently, the proposed interface provides a robust, ungrounded framework for multi-modal compliance perception, enabling stable force rendering in telemanipulation tasks.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_41"
    },
    {
      "id": "ThPo5P.42",
      "paperId": "492",
      "title": "A Hierarchical Action-Based Control for Mobile Manipulator Teleoperation with Vision and Language Interfaces",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "345143",
          "name": "Lim, Yumin",
          "affiliation": "Seoul National University"
        },
        {
          "id": "478696",
          "name": "Kim, Hyeonseo",
          "affiliation": "Seoul National University"
        },
        {
          "id": "525992",
          "name": "Park, Joseph",
          "affiliation": "Seoul National University"
        },
        {
          "id": "255221",
          "name": "Lee, Haeseong",
          "affiliation": "Seoul National University"
        },
        {
          "id": "101200",
          "name": "Park, Jaeheung",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Human-Robot Interaction",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a multimodal teleoperation framework integrating vision-based manipulation, pedal-based navigation, and an LLM-based voice interface for a dual-arm mobile manipulator. Human hand motions provide intuitive manipulation control, while voice commands enable robot interaction through natural language. Experimental results in simulation and real-world environments demonstrate effective multimodal teleoperation and validate the benefits of voice-assisted interaction for improving manipulation efficiency and precision while preserving intuitive control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_42"
    },
    {
      "id": "ThPo5P.43",
      "paperId": "501",
      "title": "Comparative Study on Agility, Efficiency, and Impact Absorption of Bipedal Robots with Active Toes",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "449286",
          "name": "Kim, Joong-Gil",
          "affiliation": "Korea University of Technology and Education"
        },
        {
          "id": "449275",
          "name": "Wontae, Ye",
          "affiliation": "Koreatech"
        },
        {
          "id": "449297",
          "name": "Geunwoo, Cho",
          "affiliation": "Korea University of Technology and Education (KOREATECH)"
        },
        {
          "id": "231665",
          "name": "Yun, Seong-Ho",
          "affiliation": "Koreatech"
        },
        {
          "id": "105583",
          "name": "Cho, Se-Hyoung",
          "affiliation": "WIROBOTICS"
        },
        {
          "id": "111431",
          "name": "Kim, Yong-Jae",
          "affiliation": "Korea University of Technology and Education"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Human legs exhibit high efficiency, agility, and impact absorption, with toes playing a crucial role in these capabilities. While many attempts have been made to implement human-like toes in robots, they have not fully replicated human characteristics nor rigorously validated their benefits. We propose a 14-DOF bipedal robot emulating human toes’ lightweight, high-torque, robust nature. To quantitatively analyze the effectiveness of the active toes in terms of agility, efficiency, and impact absorption, we developed an actuator- and transmission-aware simulation training environment that reflects actual actuators with coupled transmissions and motor-side power consumption. To ensure a fair comparison between configurations with and without active toes, we applied an identical training procedure to both. The simulation results indicate that, at 1.33 m/s walking, the toe-equipped model reduced the cost of transport (CoT) by 17.5% and heel-strike ground reaction force (GRF) by 5.0% compared with the toe-ablation configuration. On the agility test, the toe-equipped model was 4.4% slower on average but reduced mean path deviation by 25.0%, completing the course in the same time to within 0.1%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_43"
    },
    {
      "id": "ThPo5P.44",
      "paperId": "505",
      "title": "Active Stereo Vision for Grasping Stacked Objects Using a Single 2D Camera",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528544",
          "name": "Choi, Hyeonji",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "469528",
          "name": "Kim, Yi Gyeom",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "402584",
          "name": "Kwon, Nam Kyu",
          "affiliation": "Yeungnam University"
        },
        {
          "id": "104563",
          "name": "Kim, Sungho",
          "affiliation": "Yeungnam University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Industrial Applications of Control",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper proposes a dual-viewpoint vision system that uses a single 2D camera mounted on a 6-degree-offreedom robotic arm. The proposed system moves the camera up and down to perform triangulation based on Oriented FAST and Rotated BRIEF feature points. To handle stacked environments, we propose an object-separation method that uses the bottom object to compute XY-plane coordinates and the top object to estimate height, independently of each other. We also apply a top-band masking technique that extracts only the topmost region of the object, which reduces feature-matching errors and greatly improves the accuracy of height estimation for the top surface of the target object. Finally, based on the estimated height, 2D pixels are back-projected into 3D space to dynamically calculate the physical grasp width for adaptive gripper control. By applying a Median Absolute Deviation-based time-series stability filter, the proposed system achieved a 97.5% grasp success rate across various single-object and stacked-object scenarios, demonstrating highly robust manipulation performance without any additional 3D sensor.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_44"
    },
    {
      "id": "ThPo5P.45",
      "paperId": "506",
      "title": "AutoGround-VLA: Autonomous Visual Grounding for Vision-Language-Action Robot Manipulation",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528539",
          "name": "Jeong, Jiyong",
          "affiliation": "Kookmin University"
        },
        {
          "id": "109773",
          "name": "Cho, Baek-Kyu",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Color-conditioned object sorting is difficult for text-only Vision-Language-Action (VLA) policies because they must simultaneously interpret color-related language, localize the target object, infer the desired destination, and generate low-level robot actions. This paper proposes AutoGround-VLA, an autonomous visually grounded VLA frame- work that separates target reasoning from action generation. A Qwen3-VL 30B Vision-Language Model (VLM) pre- dicts the target bounding box from the current robot image and a target command, while a GR00T N1.7-based VLA policy executes manipulation using the marked image, original multi-view observations, robot state, and a simplified destination command. The system also uses an inference trig signal to invoke VLM grounding only when new target reasoning is required. Experiments on the DARU humanoid gripper platform show that the proposed method im- proves in-distribution sorting, color-destination compositional generalization, and unseen-color extrapolation compared with text-only baselines.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_45"
    },
    {
      "id": "ThPo5P.46",
      "paperId": "511",
      "title": "Design and Optimization of a Decentralized Active Knee Exoskeleton with a Polycentric Five-Bar Mechanism",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528540",
          "name": "Wimalarathna, Asiri",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "528561",
          "name": "Abeyrathna, Saniru",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "528560",
          "name": "Rathnayaka, Chamod",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "202943",
          "name": "Ranaweera, Pubudu",
          "affiliation": "University of Moratuwa"
        },
        {
          "id": "113254",
          "name": "Gopura, R.A.R.C.",
          "affiliation": "Department of Mechanical Engineering"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Exoskeleton Robot",
        "Control Devices and Instruments"
      ],
      "abstract": "Knee osteoarthritis is a prevalent musculoskeletal disorder, yet the clinical efficacy of existing active lower-limb exoskeletons is often limited by poor kinematic alignment and high metabolic penalties. Conventional single-axis and four-bar joints fail to accurately track the human knee's migrating instantaneous centre of rotation (ICR), inducing parasitic shear forces, while heavy joint-mounted actuators disrupt natural gait. This paper presents the design and optimisation of a lightweight, active knee exoskeleton featuring a geared five-bar polycentric linkage. Optimised via a genetic algorithm, the mechanism eliminates kinematic singularities within the functional range of motion and achieves an ICR-tracking root mean square error of 0.47 mm over a 0◦– 60◦ range, satisfying the 0.5 mm design target. A decentralised actuation architecture routes power from a waist-mounted motor via bidirectional Bowden cables to reduce added mass on the leg. A quasi-static transmission analysis indicates a motor torque of 8.1 Nm is required to deliver the 35 Nm target assistive torque during stance; a 15 Nm continuous-torque actuator was selected. An iterative learning controller is proposed to compensate for Bowden cable friction and compliance hysteresis. The fabricated prototype demonstrates the physical feasibility and wearable form factor of the design.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_46"
    },
    {
      "id": "ThPo5P.47",
      "paperId": "522",
      "title": "Reinforcement Learning for Jumping Control of a Humanoid Single Leg with a Toe Joint",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528584",
          "name": "Kim, Kyeong-min",
          "affiliation": "Kookmin University"
        },
        {
          "id": "528525",
          "name": "Lee, Jiwoo",
          "affiliation": "Kookmi Univ"
        },
        {
          "id": "109773",
          "name": "Cho, Baek-Kyu",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This paper compares a fixed-toe Flat-Foot model and a movable-toe Toe-Foot model in a reinforcement- learning-based one-leg jumping task. Both models are trained with proximal policy optimization under the same command distribution, reward structure, network configuration, and transition budget. The command vector specifies planar velocity, yaw rate, and base height, and all three objectives are explicitly represented in the reward. The effect of toe mobility is evaluated from the angular velocities of the six actuated leg joints: hip yaw, hip roll, hip pitch, knee pitch, ankle pitch, and ankle roll. Root-mean-square (RMS) and signed peak angular velocities are compared for each joint, together with the reduction rate from Flat-Foot to Toe-Foot. One independently trained policy per model is evaluated over ten consecutive jumping cycles under identical command conditions. Overall, the Toe-Foot model reduces angular-velocity RMS by 27.9% and peak magnitude by 34.75%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_47"
    },
    {
      "id": "ThPo5P.48",
      "paperId": "557",
      "title": "Design and Azimuth-Axis Experimental Evaluation of a Spring-Preloaded Dual-Worm Anti-Backlash Mechanism for a Two-Axis Robotic Fire Monitor",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "387808",
          "name": "Kim, Hyeonsu",
          "affiliation": "Hanyang Unviersity"
        },
        {
          "id": "524557",
          "name": "Yu, Dongyeop",
          "affiliation": "Hanyang University"
        },
        {
          "id": "194767",
          "name": "Yoo, Sungkeun",
          "affiliation": "Keimyung University"
        },
        {
          "id": "171061",
          "name": "Kim, Taegyun",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents a spring-preloaded dual-worm anti-backlash mechanism for a two-axis robotic fire monitor intended for firefighting robot applications. Worm-gear transmissions are suitable for robotic fire monitors because of their compact structure, high reduction ratio, and load-holding capability under water-jet reaction forces. However, backlash in worm-gear transmissions can cause lost motion, hysteresis, and direction-dependent aiming error during motion reversal. To reduce backlash-induced angular error, the proposed mechanism adds a synchronized passive worm gear to the driving worm gear and applies axial spring preload to maintain tooth contact with the output gear. The mechanism was implemented in a two-axis fire monitor prototype, and its initial experimental evaluation was conducted on the azimuth axis. Backlash was evaluated by comparing the motor-side ideal output angle, calculated from motor rotation and gear ratio, with the output-side angle measured by an external encoder. Dry and water-discharge experiments were conducted to investigate the effects of spring preload and approach direction on angular error and motor current. The experimental results show that the proposed mechanism reduces backlash-induced angular error under both dry and water-discharge conditions without a noticeable increase in motor current.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_48"
    },
    {
      "id": "ThPo5P.49",
      "paperId": "360",
      "title": "Vision-Inertial Fusion for Golf Swing and Human Motion Estimation Using an RGB-D Camera and a Club-Mounted IMU",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461630",
          "name": "Chung, Quang Khanh",
          "affiliation": "University of Ulsan"
        },
        {
          "id": "408718",
          "name": "Pham, Thanh Tuan",
          "affiliation": "University of Ulsan"
        },
        {
          "id": "105034",
          "name": "Suh, Young Soo",
          "affiliation": "Univ. of Ulsan"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents a framework for joint estimation of golf club motion and full-body golfer motion using a club-mounted inertial measurement unit (IMU) and an external RGB-D camera. An indirect Kalman filter fuses IMU measurements with visual observations to estimate golf club motion while compensating for sensor drift, calibration errors,and mounting uncertainties. The estimated club motion is then integrated into an optimization-based SMPL-X framework through 3D joint constraints and hand–club interaction constraints to reconstruct full-body motion. Experimental results demonstrate that the proposed method significantly improves clubhead trajectory estimation compared with an IMU-only approach, achieving a mean position error of 2.8 cm while producing physically consistent golfer motion. The proposed system provides an effective solution for comprehensive golf swing analysis.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_49"
    },
    {
      "id": "ThPo5P.50",
      "paperId": "68",
      "title": "Photon Counting Stabilized Retinex Fusion for Low-Light Enhancement",
      "session": "ThPo5P",
      "date": "2026-10-29",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525291",
          "name": "Kwon, Sanghyeon",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "407489",
          "name": "Yeo, Gilsu",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "407498",
          "name": "Cho, Myungjin",
          "affiliation": "Hankyong National University"
        },
        {
          "id": "407488",
          "name": "Lee, Min-Chul",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper proposes a photon counting stabilized Retinex method for low-light image enhancement in extremely dark environments. The proposed method first interprets the luminance component of the input image as a photon count representation and applies a Poisson-aware stabilization process to reduce shot noise caused by insufficient photon arrivals. The stabilized luminance is then processed using multi-scale Retinex (MSR) to generate a Retinex prior that compensates for illumination variations and enhances structural information. The photon stabilized luminance and Retinex prior are fused through a maximum a posteriori (MAP)-based weighted fusion scheme to restore brightness and fine details in dark regions. To further suppress noise amplified during enhancement, a mask-based post-processing stage for preserving the brightness is applied in the YCrCb color space, selectively reducing luminance and chrominance noise while preserving edges and structural details. Experiments using the See-in-the-Dark (SID) dataset show that the proposed method improves dark-region visibility and reduced color and background noise compared with conventional Retinex-based methods, and the peak signal-to-noise ratio (PSNR) and structural similarity index measure (SSIM) results prove the effectiveness of the proposed method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_3.html#thpo5p_50"
    },
    {
      "id": "FrAT1.1",
      "paperId": "526",
      "title": "Prescribed-Time Consensus for Uncertain Multi-Agent System Via Volterra-Operator Approach",
      "session": "FrAT1",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528614",
          "name": "Yang, Shun",
          "affiliation": "Huazhong University of Science and Technology"
        },
        {
          "id": "436657",
          "name": "Xiao, Qiang",
          "affiliation": "Huazhong University of Science and Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Information and Networking",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "The problem of prescribed-time consensus tracking is studied in this paper for second-order nonlinear multi-agent systems in the presence of parametric uncertainties, external disturbances, and time-varying delays. To address the challenges arising from unknown dynamics and delayed information, the distributed control task is decomposed into two tightly coupled components: parameter estimation and tracking control. A novel Volterra-operator-based estimation scheme is developed, which enables prescribed-time convergence of unknown parameters even in the presence of disturbances, thereby overcoming the limitations of conventional asymptotic or finite-time estimation methods. On this basis, an adaptive sliding-mode control law is constructed to ensure that the system realizes prescribed-time consensus tracking. By constructing an appropriate Lyapunov functional and analyzing the delay-dependent terms, the consensus tracking errors are rigorously proven to be prescribed-time stable and the boundedness of control inputs is ensured. Simulation is conducted in a two-dimensional scenario and further validates the effectiveness, robustness, and prescribed-time convergence capabilities of the presented scheme.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat1_01"
    },
    {
      "id": "FrAT1.2",
      "paperId": "558",
      "title": "Cosserat Rod Theory-Based Graph Neural Networks for Winding Manipulation of Deformable Linear Objects",
      "session": "FrAT1",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "350137",
          "name": "Lee, Giwan",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "150612",
          "name": "Hong, Ayoung",
          "affiliation": "Chonnam National University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Robotic manipulation of deformable linear objects (DLOs), such as winding cables around obstacles, is highly challenging due to their infinite degrees of freedom and complex external interactions. Traditional physics-based modeling is computationally intensive, while data-driven methods struggle with physical consistency and generalization. To address these limitations, this paper proposes a Cosserat rod-based Graph Neural Network (C-GNN) framework for predicting DLO shapes and external contact forces during winding tasks. By embedding a physics-informed loss function derived from Cosserat rod theory, the network enforces mechanical constraints, thereby enhancing prediction accuracy and generalization. We integrate the C-GNN into a Model Predictive Control (MPC) framework to optimize robotic winding operations. Simulation experiments in PyElastica demonstrate that the proposed C-GNN successfully estimates DLO configurations and contact forces, achieving a node position RMSE of 7.04 mm. Under MPC control, the C-GNN controller outperforms a pure GNN by reducing geometric deviation to 0.10 mm and significantly suppressing average contact forces. The framework exhibits extrapolated condition robustness in winding scenarios, ensuring stable manipulation with reduced risk of excessive deformation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat1_02"
    },
    {
      "id": "FrAT1.3",
      "paperId": "267",
      "title": "Probabilistic Forced Backward Reachable Sets for Stochastic Avoid Problems",
      "session": "FrAT1",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "375962",
          "name": "Solanki, Prashant",
          "affiliation": "Delft University of Technology"
        },
        {
          "id": "375499",
          "name": "van Beers, Jasper",
          "affiliation": "Delft University of Technology"
        },
        {
          "id": "183401",
          "name": "de Visser, Coen",
          "affiliation": "TU Delft"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "In safety-critical systems, reachability provides a principled way to certify unsafe operating regions. Deterministic and robust forced backward reachable sets characterize states from which a system is driven into an avoid set regardless of the control action. This paper introduces a stochastic counterpart, the probabilistic forced backward reachable set, defined as the set of states from which every admissible Markov policy reaches the avoid set within a finite horizon with probability above a prescribed threshold. We develop a dynamic-programming characterization and prove measurability and monotonicity properties. For finite state and control spaces, the proposed method computes the set exactly. For continuous state and control spaces, we construct a finite abstraction and derive an error bound showing convergence of the approximate value function as the grid size tends to zero. The resulting threshold-shifted abstraction provides a certified inner approximation of the probabilistic forced backward reachable set.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat1_03"
    },
    {
      "id": "FrAT1.4",
      "paperId": "340",
      "title": "Discrete-Time D-Type and PD-Type ILC: An LMI-Based Design Approach",
      "session": "FrAT1",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525361",
          "name": "Mochizuki, Kosei",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "166714",
          "name": "Zhai, Guisheng",
          "affiliation": "Shibaura Institute of Techbology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Industrial Applications of Control"
      ],
      "abstract": "Iterative Learning Control (ILC) is a highly effective control strategy for improving the tracking performance of systems that execute repetitive tasks. While continuous-time ILC has been extensively studied, the development of discrete-time ILC is of great practical significance due to the widespread implementation of digital controllers. This paper investigates discrete-time D-type and PD-type ILC schemes. In discrete-time frameworks, the difference of the tracking error is analyzed as a comparison to the continuous-time derivative operation. The proposed learning laws generate the control input for the upcoming iteration based solely on the control input and the tracking error from the previous iteration. To guarantee the monotonic convergence of the tracking error, sufficient design conditions are mathematically derived and formulated in terms of Linear Matrix Inequalities (LMIs). Finally, numerical simulations using MATLAB are provided to demonstrate the effectiveness, convergence, and properties of the proposed discrete-time D-type and PD-type ILC approaches.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat1_04"
    },
    {
      "id": "FrAT1.5",
      "paperId": "341",
      "title": "Robust Controller Design for a Hybrid Dynamic Vibration Absorber with Limited Information",
      "session": "FrAT1",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527142",
          "name": "Goto, Junta",
          "affiliation": "Shibaura Institute of Technology"
        },
        {
          "id": "166714",
          "name": "Zhai, Guisheng",
          "affiliation": "Shibaura Institute of Techbology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Industrial Applications of Control"
      ],
      "abstract": "Passive dynamic vibration absorbers have limited effectiveness in suppressing vibrations in complex systems, especially under fluctuating operating conditions. To overcome this limitation, this paper proposes a robust design method for hybrid dynamic vibration absorbers, which integrate active control to enhance performance. In practical applications, physical parameters such as spring constants and damping coefficients inevitably deviate from their nominal values due to long-term aging and modeling errors. Therefore, the core challenge is designing robust state feedback controllers that can maintain asymptotic stability and control performance despite these parameter uncertainties, while strictly adhering to structural constraints, such as distributed access to state information. The design problem is formulated as a linear matrix inequality (LMI) that incorporates the robust performance objectives of a linear quadratic regulator (LQR). The paper then details a homotopy-based algorithm to solve this complex, constrained LMI problem. Furthermore, to demonstrate the practical applicability of the proposed methodology, this study evaluates the controller design on a higher-order five-mass system. Simulation results confirm that the designed robust controllers effectively attenuate vibrations despite structural limitations and uncertain conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat1_05"
    },
    {
      "id": "FrAT1.6",
      "paperId": "107",
      "title": "Decentralized H_{infty} Filtering for Interconnected Systems with Structured Lyapunov Matrices",
      "session": "FrAT1",
      "date": "2026-10-30",
      "start": "10:15",
      "end": "10:30",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525557",
          "name": "Chang, Yufang",
          "affiliation": "Hubei University of Technology"
        },
        {
          "id": "381532",
          "name": "He, Ziyi",
          "affiliation": "Dalian University of Technology"
        },
        {
          "id": "166714",
          "name": "Zhai, Guisheng",
          "affiliation": "Shibaura Institute of Techbology"
        },
        {
          "id": "525558",
          "name": "Huang, Wencong",
          "affiliation": "Hubei University of Technology"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Navigation, Guidance and Control",
        "Information and Networking"
      ],
      "abstract": "The problem of decentralized H_infinity filtering for interconnected systems is addressed, in which each subsystem is coupled with others through interconnection signals. A sufficient condition, expressed as a bilinear matrix inequality, is derived to ensure asymptotic stability of the filtering error system while satisfying a prescribed H_infinity performance index. Since the bilinear matrix inequality has coupled matrix variables of the Lyapunov matrix P and the decentralized controller coefficient matrix, it is generally difficult to solve. Assuming that the Lyapunov matrix P takes a block diagonal structure as diag{P_1, P_2, ... } corresponding to the interconnection structure of the system, the structure of each Lyapunov matrix P_i is analyzed in this paper, revealing that its block diagonal or non block diagonal forms impacts the filter design and the estimation performance. Simulation examples demonstrate the effectiveness of the proposed approaches.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat1_06"
    },
    {
      "id": "FrAT2.1",
      "paperId": "372",
      "title": "WaveSync: Constrained Wavefront Optimization for Synchronized Co-Speech Gestures in Humanoid Robots",
      "session": "FrAT2",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "368772",
          "name": "Nguyen Canh, Thanh",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        },
        {
          "id": "504471",
          "name": "Tran Viet, Thang",
          "affiliation": "Vietnam National University, Hanoi, University of Engineering and Technology"
        },
        {
          "id": "527963",
          "name": "Uong Gia, Huy",
          "affiliation": "University of Engineering and Technology, Vietnam National University"
        },
        {
          "id": "504388",
          "name": "Dinh Van, Phuc",
          "affiliation": "VNU University of Engineering and Technology"
        },
        {
          "id": "215033",
          "name": "Tuyen, Nguyen Tan Viet",
          "affiliation": "University of Southampton"
        },
        {
          "id": "371214",
          "name": "Hoang, Van Xiem",
          "affiliation": "VNU - University of Engineering and Technology"
        },
        {
          "id": "102527",
          "name": "Chong, Nak Young",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Human-Robot Interaction"
      ],
      "abstract": "Expressive co-speech gestures are crucial for natural human--robot interaction, yet generating them on physical humanoid robots remains challenging because, unlike virtual avatars, robots must synchronize gestures with speech under strict kinematic and actuator constraints. We present textbf{WaveSync}, a hybrid framework in which a Large Language Model decomposes dialogue responses into structured semantic schemas and assigns per-word importance weights, forming a continuous Semantic Importance Wave. Gesture trajectories are shaped through Dynamic Movement Primitives to ensure kinematic feasibility while enhancing expressiveness. A Wavefront Optimization stage aligns gesture stroke peaks with speech emphasis peaks and resolves residual temporal conflicts through gesture-duration compression and forward propagation. Experimental evaluation across five dialogue scenarios demonstrates effective gesture--speech alignment and favorable performance in both objective and subjective evaluations. The results further show that the key components of WaveSync contribute to producing gestures that are expressive, semantically grounded, and kinematically feasible. The code, resources, and videos are available at href{https://github.com/pairs-lab/WaveSync}{WaveSync}.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat2_01"
    },
    {
      "id": "FrAT2.2",
      "paperId": "454",
      "title": "Predictive Intent-Risk Alignment for Cooperative Shared Steering in Obstacle Avoidance",
      "session": "FrAT2",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528353",
          "name": "Lee, Changuk",
          "affiliation": "Pusan National University"
        },
        {
          "id": "248478",
          "name": "Ahn, Changsun",
          "affiliation": "Pusan National University"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents a cooperative shared-steering framework for obstacle avoidance based on dual-intent prediction and a newly defined reciprocal intent-risk alignment (RIRA) model. RIRA is introduced as an operational task level compatibility measure rather than a psychological trust estimate, so that authority can be allocated from measurable prediction outcomes. The driver intent is predicted as a 10-step future steering sequence using a Transformer teacher and a compact multilayer-perceptron student, while the automation intent is obtained by rolling out a proximal-policy optimization steering policy through a vehicle model. RIRA evaluates two complementary factors: intent compatibility from steering-sequence magnitude mismatch and sign conflict, and motion quality from predicted collision-risk and front slip stability. These factors generate a reference authority, and a discrete predictive optimizer selects the final blending coefficient by considering safety, alignment consistency, and authority smoothness. CarSim-Simulink co-simulation for a stationary-obstacle avoidance scenario at 80 km/h shows reductions in potential-field risk, front-tire slip, steering disagreement, and conflict time by 3.43%, 6.26%, 10.51%, and 7.18%, respectively, compared with a baseline allocator without predicted-intent conflict consideration.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat2_02"
    },
    {
      "id": "FrAT2.3",
      "paperId": "261",
      "title": "Toward Trust-Aware Control in Wearable Gait Assistance: A Pilot Study Linking Controller Conditions and Audited Control Features to Trust-Related Reported Responses",
      "session": "FrAT2",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "430067",
          "name": "Cho, Kwonseung",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "196856",
          "name": "Hur, Pilwon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Exoskeleton Robot",
        "Rehabilitation Robot"
      ],
      "abstract": "Trust-aware control in wearable gait assistance requires linking user trust responses to interpretable control signals, but most HRI frameworks treat trust as a single global score. This pilot study organizes 140 expressions from 35 pHRI and wearable robotics sources into trust-related semantic labels, compares subjective ratings across controller conditions, and examines associations between audited control features and trust-related reported responses. Seven post-stroke participants walked with a wearable knee exoskeleton under Zero-Torque, PD, and Active Inference conditions, providing 72 trial-level observations. Participant random-intercept mixed models identified five exploratory associations after BH correction: peak motor power with Wearability experience, and motor-power variability with reported Trust, perceived Ability, Comfort response, and perceived Safety. These exploratory results provide candidate feature–response relationships for future trust-aware control studies rather than validated control mappings.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat2_03"
    },
    {
      "id": "FrAT2.4",
      "paperId": "600",
      "title": "Design and Kinematic Analysis of a Five-Bar Closed-Chain Bipedal Leg Architecture",
      "session": "FrAT2",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "487823",
          "name": "Ganjam Chandramohan, Mohnish",
          "affiliation": "Kyoto University of Advanced Science"
        },
        {
          "id": "428453",
          "name": "Nanayakkara, J.A Gajitha Ganganath",
          "affiliation": "Kyoto University of Advanced Science"
        },
        {
          "id": "457762",
          "name": "Meitani, Khalid Zeinelabden Yousef",
          "affiliation": "Kyoto University of Advanced Science"
        },
        {
          "id": "190052",
          "name": "Nisar, Sajid",
          "affiliation": "Kyoto University of Advanced Science"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Recent progress in humanoid robotics has intensified the demand for legs that locomote with human-like efficiency. Most bipedal robots, however, adopt a bent-knee stance to preserve controllability and avoid singularities, which forces the knee actuators to continuously bear gravitational and inertial loads and drives up power consumption.This paper presents the design and kinematic analysis of an adjustable five-bar closed-chain leg that achieves a straight- leg stance with the use of closed loop design. The mechanism couples a biomimetic femur–tibia pair through an actuated cross-link whose length adapts to the leg configuration, and is driven by two actuators: a rotary actuator at the hip and a mode-switching linear–rotary mechanism integrated into the knee link. A design benchmark derived from the femur-to-tibia ratio and the five-bar Grashof criteria sizes the links for any target scale. Kinematic analysis using a decoupled 3+2 link model and the resulting Jacobian shows that the leg reproduces serial 2R-like trajectories and evaluates serial singularities for the proposed closed-chain mechanism.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat2_04"
    },
    {
      "id": "FrAT2.5",
      "paperId": "330",
      "title": "Decoupled Object-Centric Video Understanding for Generating Robotic Manipulation Commands",
      "session": "FrAT2",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "368772",
          "name": "Nguyen Canh, Thanh",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        },
        {
          "id": "500811",
          "name": "Tran, Thanh-Tuan",
          "affiliation": "Faculty of Electrical and Telecommunications, University of Engineering and Technology - VietNam National University"
        },
        {
          "id": "463794",
          "name": "Zhang, Haolan",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        },
        {
          "id": "281206",
          "name": "Gao, Ziyan",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        },
        {
          "id": "371214",
          "name": "Hoang, Van Xiem",
          "affiliation": "VNU - University of Engineering and Technology"
        },
        {
          "id": "102527",
          "name": "Chong, Nak Young",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Translating video demonstrations into executable robot commands remains challenging because existing methods often fail to identify which objects are functionally involved in the demonstrated action. As a result, they may generate commands that are linguistically plausible but operationally ambiguous. We propose an object-centric video understanding framework that decouples action recognition from object identification to generate precise, grammar-free manipulation commands. Our approach integrates Temporal Shift Modules (TSM) for efficient spatio-temporal action classification with a novel textbf{Object Selection} algorithm that identifies task-relevant objects through trajectory-based role classification, blur detection, and overlap minimization. The selected objects are then processed by Vision-Language Models (VLMs) for robust category recognition and zero-shot generalization. Evaluated on a modified Something-Something V2 dataset, our method achieves 86.79% action classification accuracy and BLEU-4 scores of 0.337 on standard objects and 0.261 on novel objects. These results improve over the strongest task-specific baseline by 80.2% and 143.9%, respectively. Larger gains are observed in METEOR and CIDEr, reaching 157.9% and 171.7% on novel objects. Across all semantic metrics, our approach consistently outperforms task-specific methods and remains competitive with, or surpasses, large general-purpose VLMs while retaining a modular, object-centric design.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat2_05"
    },
    {
      "id": "FrAT3.1",
      "paperId": "335",
      "title": "Data-Driven Predictive Pitch Control of a Wind Turbine above the Rated Wind Speed",
      "session": "FrAT3",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526194",
          "name": "Kim, Daehan",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "527570",
          "name": "Kim, Hyungsuk",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "238340",
          "name": "Back, Juhoon",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "This paper presents a data-driven predictive pitch control method for wind turbines operating in the above-rated wind speed region. Under high-wind conditions, wind-speed fluctuations can lead to excessive aerodynamic torque and generator-speed excursions, particularly because the blade-pitch actuator has limited bandwidth and rate constraints. To address this problem, a collective blade-pitch control strategy is developed based on input-output data, while the conventional generator-torque control loop is retained. The proposed controller constructs a non-parametric prediction model from measured data and computes the optimal pitch command in a receding-horizon manner. The control objective is to improve generator-speed regulation and mitigate overspeed while satisfying practical pitch-angle and pitch-rate constraints. Wind-speed information is incorporated into the prediction model as an exogenous signal to enhance the predictive capability under varying wind conditions. The proposed method is evaluated using a nonlinear simulation model of a utility-scale wind turbine in above-rated wind scenarios. The simulation results demonstrate that the proposed data-driven predictive controller generates proactive pitch actions in response to wind-speed variations and maintains stable generator-speed and power regulation under high-wind operation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat3_01"
    },
    {
      "id": "FrAT3.2",
      "paperId": "549",
      "title": "Optimal Electric Bus Depot Charging: Cost Savings, Grid Limits, and Robustness Trade-Offs",
      "session": "FrAT3",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528373",
          "name": "Widmer, Fabio",
          "affiliation": "ETH Zürich"
        },
        {
          "id": "528416",
          "name": "Pinter, Luca",
          "affiliation": "ETH Zürich"
        },
        {
          "id": "526097",
          "name": "Moradi, Mohammad Hossein",
          "affiliation": "ETH Zurich"
        },
        {
          "id": "304749",
          "name": "Onder, Christopher",
          "affiliation": "ETH Zürich"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "Depot charging of electric bus fleets must minimize electricity costs, respect grid limits, and remain feasible despite uncertain trip energy demand. While cost-optimal charging is well studied, its value under different electricity prices and grid connection capacities, as well as the economic cost of robustness, remain poorly quantified. We address these gaps with a convex robust formulation in which bounded demand uncertainty is enforced through worst-case state-of-energy constraints. The formulation is evaluated against charge-on-arrival using realistic service schedules for four Swiss depots containing 7-35 buses. In the depots studied, smaller depots achieve the greatest relative benefit from optimization, with total electricity cost reductions exceeding 50%, because optimization mitigates charging peaks that strongly affect their costs. For all depot sizes, the savings from optimization increase with electricity price volatility. Optimization can also lower the grid capacity required for feasible operation by over 40%, although tight limits reduce peak shaving potential. Protection against energy-demand deviations of 10% increases total electricity cost by less than 0.1%. The resulting charging power profiles exhibit interpretable price-threshold and peak-shaping behavior, providing practical guidance for real-world implementations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat3_02"
    },
    {
      "id": "FrAT3.3",
      "paperId": "112",
      "title": "Techno-Economic Evaluation of the CIRCE Process Via an Equation-Oriented Model",
      "session": "FrAT3",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525515",
          "name": "Hyeon, Jisu",
          "affiliation": "Incheon National University, Incheon"
        },
        {
          "id": "409324",
          "name": "Kim, Jong Woo",
          "affiliation": "Incheon National University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "An equation-oriented (EO) techno-economic optimization framework is developed for a CIRCE-based heavy-water production system with five LPCE columns fed by alkaline water electrolysis (AWE) and/or steam methane reforming (SMR). A stack-level AWE model with isotope-resolved deuterium selectivity is coupled with the CIRCE material balance into a single-stage NLP that simultaneously optimizes stack temperature/current, column height, and operating pressure under an LCOH objective. At zero carbon tax, the smr+smr scenario attains the lowest LCOH of 2.24 USD/kg, about 16% below ele+ele at 2.67 USD/kg. Above approximately 21.7 USD/tCO2, the fully electrified configuration becomes the most economical; this study quantifies the crossover at the integrated process level.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat3_03"
    },
    {
      "id": "FrAT3.4",
      "paperId": "612",
      "title": "High-Speed Position Sensorless Control of SRM Using Commutation-Current Response",
      "session": "FrAT3",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "409401",
          "name": "Kim, Gyuwon",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "409381",
          "name": "Park, Seung Yun",
          "affiliation": "Kumoh National University of Technology"
        },
        {
          "id": "385232",
          "name": "Ban, Jaepil",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Process Control Systems",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper presents a high-speed position sensorless control method for switched reluctance motor (SRM) drives using the early commutation current response of the incoming phase. The proposed method constructs a phase-dependent lookup table between rotor position and the phase current sampled at a fixed short delay after phase turn-on. Since this feature is based on the short-duration current response after voltage excitation, it can be naturally obtained during low-speed model-free sensorless operation, enabling a simple hybrid transition from low-speed operation to medium-to-high-speed sensorless control. During operation, the measured early current response is inversely mapped to rotor-position candidates through the lookup table. Since the same current response can correspond to multiple rotor-position candidates, current-slope variation is used as a branch discriminator rather than as an exact position marker. The selected discrete position information is then propagated by an event-based predictor to obtain a continuous rotor-position estimate for commutation timing and current control.The proposed framework does not require premeasured magnetic characteristic data, motor models, additional hardware, or computationally intensive estimation algorithms, thereby reducing implementation complexity. The effectiveness of the proposed approach is validated through experiments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat3_04"
    },
    {
      "id": "FrAT4.1",
      "paperId": "502",
      "title": "Momentum-Observer-Based State Augmentation for VLA-Based Mass Comparison",
      "session": "FrAT4",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528521",
          "name": "Kim, Chanwoo",
          "affiliation": "Kookmin University"
        },
        {
          "id": "109773",
          "name": "Cho, Baek-Kyu",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Vision-Language-Action (VLA) models have shown strong generalization capabilities in robotic manipulation. However, most VLA models rely heavily on visual observations, which limits their ability to infer physical interaction properties such as mass differences between visually indistinguishable objects. In this paper, we present a vertical- disturbance-based state input augmentation method for VLA-based robotic mass comparison using momentum-observer- based disturbance estimation. The proposed method estimates external disturbances from the robot’s proprioceptive state without additional force/torque or tactile sensors, and transforms the estimated joint-space disturbance into end-effector disturbance components. The vertical disturbance estimates of the left and right end-effectors are then selected and appended to the state input of the VLA policy, providing physical interaction cues during object lifting. The proposed method is evaluated on a dual-arm mass comparison task in which the robot lifts two visually identical cubes with different masses and places the heavier cube into a tray. Across 300 paired evaluation trials, adding the vertical disturbance estimates of the two end-effectors improved the task success rate from 60.3% for the baseline policy without disturbance information to 77.3%. These results demonstrate that momentum-observer-based vertical disturbance estimates can serve as sensorless physical cues for improving the mass comparison performance of VLA policies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat4_01"
    },
    {
      "id": "FrAT4.2",
      "paperId": "616",
      "title": "Radial Basis Function Neural Network-Aided Data-Driven Unscented Kalman Filter for Nonlinear Systems",
      "session": "FrAT4",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528794",
          "name": "Matsubara, Isaki",
          "affiliation": "Kyoto Institute of Technology"
        },
        {
          "id": "156096",
          "name": "Sawada, Yuichi",
          "affiliation": "Kyoto Institute of Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "State estimation is an important problem for the control of partially observed and noisy nonlinear dynamical systems. The Kalman filter (KF) and its nonlinear extensions are widely used for this purpose, but their performance strongly depends on the accuracy of the dynamical model. Therefore, data-driven state estimation is useful when detailed modeling or system identification is difficult. This paper proposes an RBFNN-aided data-driven unscented Kalman filter (UKF) for improving state-estimation accuracy from a small collected dataset without detailed modeling. The proposed method introduces a radial basis function neural network (RBFNN) as a compensator for the approximate dynamics used in the UKF. The compensator is trained offline from observed input-output data by minimizing a criterion based on the innovation likelihood and the prior error covariance, without using the true state as supervised data. The proposed method is evaluated through Acrobot simulations with two different types of approximate models. The results show that the proposed compensator reduces the normalized mean squared error (NMSE) on both the training and test datasets, and that the modeling error of the approximate model affects the performance on the test dataset.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat4_02"
    },
    {
      "id": "FrAT4.3",
      "paperId": "342",
      "title": "Series-Based Finite Prediction Horizon Model Predictive Control and Its Applications in UAV Attitude Control",
      "session": "FrAT4",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527705",
          "name": "Sun, Siyuan",
          "affiliation": "National University of Singapore"
        },
        {
          "id": "159929",
          "name": "Huang, Sunan",
          "affiliation": "National University of Singapore"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Autonomous Vehicle Systems",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper proposes a series-based model predictive control (MPC) method that reduces computational complexity and load. By utilizing series expansion techniques, the proposed method transforms the traditional MPC problem into an algebraic computational problem, making it more suitable for high-frequency real-time applications, for example, we apply it to the control issue in UAV rotational dynamics.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat4_03"
    },
    {
      "id": "FrAT4.4",
      "paperId": "436",
      "title": "Quantification of Actuator Placement Effects on Proximal-Joint Current Via Serial and Parallel Wrist Modules",
      "session": "FrAT4",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528272",
          "name": "Jeon, Minhyuk",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "386409",
          "name": "Kim, Juhyun",
          "affiliation": "Seoul National University"
        },
        {
          "id": "294364",
          "name": "Sung, Eunho",
          "affiliation": "Seoul National University"
        },
        {
          "id": "302751",
          "name": "You, Seungbin",
          "affiliation": "Korea Institute of Science and Technology"
        },
        {
          "id": "101200",
          "name": "Park, Jaeheung",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Devices and Instruments"
      ],
      "abstract": "A parallel wrist generally differs from its serial counterpart in workspace, singularity behaviour, achievable wrist angular velocity, payload capability, and the spatial distribution of the wrist actuator mass at the same time, so a direct comparison cannot isolate which property is responsible for an observed effect. This study quantifies the extent to which the actuator current at the shoulder and elbow is attributable specifically to wrist actuator placement, by comparing a serial wrist and a parallel wrist that are equalized in the other properties. A parallel wrist with two degrees of freedom (DOF) is presented for a humanoid manipulator with 7-DOF; roll and pitch motion of the wrist is generated by two Prismatic-Spherical-Spherical branches sharing a central universal joint, with each branch driven by a lead screw that converts the rotation of its actuator into a linear slider displacement. The geometric parameters of the wrist are determined by a constrained genetic algorithm optimization that equalizes the parallel wrist to its serial counterpart in workspace, range free of singularities, and achievable wrist angular velocity, while module mass is equalized by construction to within 1%. The two equalized modules are exchanged on the same arm and compared under a common cyclic trajectory, and the resulting reduction in the actuator current at the shoulder and elbow is reported as an estimate of the placement effect.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat4_04"
    },
    {
      "id": "FrAT4.5",
      "paperId": "240",
      "title": "Global Corridor-Guided MPPI for Robotic Manipulator Pose Control in Obstacle-Constrained Environments",
      "session": "FrAT4",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "409329",
          "name": "Lee, Munhaeng",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "131893",
          "name": "Suh, Jinho",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper proposes a global corridor-guided model predictive path integral control framework (GC-MPPI) for manipulator pose control. The proposed framework first generates a collision-free global path from the current tool center point (TCP) pose to the target pose. Using path nodes as centers, we construct a global corridor, with its width adaptively scaled according to the clearance from surrounding obstacles. This method preserves the local sampling flexibility of MPPI and mitigates the dead-end behavior caused by the constrained environments. During online control, we compute a Corridor Guiding Vector (CGV) by combining a tangential component along the corridor centerline and an inward component activated near the corridor boundary. The corridor and CGV costs are incorporated into the MPPI cost function, where the corridor cost encourages the TCP to remain within the feasible motion region and the CGV cost provides directional guidance along the corridor. To validate the performance of the proposed framework, we perform a simulation using a 6-DoF manipulator in a detour scenario. The simulation results show that GC-MPPI avoids the stagnation observed in baseline MPPI and reaches the target TCP pose. In addition, compared with GP-MPPI w/ 0.05, GC-MPPI reduces the reaching and the settling times by 20.2% and 19.3%, respectively.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat4_05"
    },
    {
      "id": "FrAT4.6",
      "paperId": "398",
      "title": "On Comparison of Discrete Controllers for 6 Degree of Freedom Manipulator Robot",
      "session": "FrAT4",
      "date": "2026-10-30",
      "start": "10:15",
      "end": "10:30",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528094",
          "name": "Jansri, Anurak",
          "affiliation": "Bangkok Thonburi University"
        },
        {
          "id": "536381",
          "name": "Rianpreecha, Chompoonut",
          "affiliation": "Bangkok Thonburi University"
        },
        {
          "id": "528101",
          "name": "Yoneyama, Keito",
          "affiliation": "Chulalongkorn University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "A Six Degree of Freedom (6DoF) manipulator robot is widely used in various applications such as line production in manufacturing and station maintenance in space. From many applications, the challenges faced in control engineering is precise control system for robotic movement and robotic position. This paper presents kinematics robot modelling via Denavit-Hartenberg (DH) method, applied forward and inverse kinematics, and the well-known controller in order to overcome the challenges. Both discrete PID and discrete Fuzzy-PI controllers are proposed. MATLAB/Simulink is mainly used to simulate the robot and controllers to observe robot’s behavior in continuous and position movements. The simulation results are carried out and showed satisfactory performance using three standard criteria including Mean Absolute Error, Mean Square Error, and Root Mean Square Error.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat4_06"
    },
    {
      "id": "FrAT5.1",
      "paperId": "179",
      "title": "Evaluation of Subject Composition Dependence and Individual Calibration Potential in Lifted-Weight Regression Using a Single IMU",
      "session": "FrAT5",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525988",
          "name": "Tomura, Kento",
          "affiliation": "Meiji University"
        },
        {
          "id": "513416",
          "name": "Hayasaka, Haruki",
          "affiliation": "Meiji University"
        },
        {
          "id": "179084",
          "name": "Itami, Taku",
          "affiliation": "Meiji University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Lifted object mass is one objective factor de scribing manual lifting conditions and may provide supplementary information for workload assessment. Previous studies have mainly investigated posture or risk assessment using multiple inertial measurement units (IMUs), or weight classification using a single IMU; however, continuous lifted weight regression using a chest-mounted single IMU and its generalization performance for unseen subjects have not been sufficiently clarified. In this study, we constructed lifted-weight regression models using a chest-mounted single IMU and consistently evaluated five-subject nested leave one-subject-out (LOSO), all ten three-subject combinations, unseen-subject evaluation, and few-shot Ridge calibration using a small amount of labeled personal data under controlled feature construction and selection conditions. In the five-subject nested LOSO evaluation, the best Ridge model achieved MAE = 3.122 kg and R2 = 0.105, confirming that room for improvement remains in average subject-independent regression. In contrast, across all ten three-subject combinations, within-group MAE varied from 2.315 to 4.062 kg, showing that performance differences attributable to subject composition exceeded those among baseline models. Moreover, within-group performance did not simply correspond to mean generalization performance for unseen subjects, indicating that high within-group performance does not necessarily guarantee generalization to unseen subjects. Few-shot Ridge calibration yielded large error reductions for some subjects, suggesting the potential for calibration using a small amount of labeled personal data, whereas its effect was subject-dependent. These results show that, in lifted-weight regression using a single IMU, average performance alone cannot sufficiently characterize generalization behavior; subject composition dependence, generalization performance for unseen subjects, and individual calibration potential using a small amount of labeled personal data should be evaluated separately.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat5_01"
    },
    {
      "id": "FrAT5.2",
      "paperId": "18",
      "title": "SiL-DT: A Simulation-In-The-Loop Digital Twin Framework for Resilient UAV Swarms in Dynamic Urban Environments",
      "session": "FrAT5",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "522851",
          "name": "Tomiwa Kunle, Oluwadare",
          "affiliation": "University of Staffordshire"
        },
        {
          "id": "522852",
          "name": "Lutta, Pantaleon",
          "affiliation": "University of Staffordshire"
        },
        {
          "id": "522853",
          "name": "Oluwasegun, Habeeb Alli",
          "affiliation": "University of Staffordshire"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Unmanned Aerial Vehicle (UAV) swarms have advanced significantly, with multi-UAV systems offering advantages such as redundancy, cost-effectiveness, and reduced dependency on infrastructure. These systems benefit applications like remote surveillance, search and rescue, and environmental monitoring. Ideally, UAVs should operate distributively and make autonomous decisions. However, developing distributed algorithms for multi-UAV systems poses challenges, particularly in real-world testing, where hardware constraints, environmental factors, and limited analytics hinder progress. Simulations have emerged as a key solution, enabling rapid iteration and detailed analytics. Yet, current simulators often lack the ability to accurately model both physical dynamics of UAVs and complexity of their communication networks. This paper introduces SiL-DT, a Simulation-in-the-Loop Digital Twin framework designed to bridge this gap. Specifically, we combine Gazebo for physics simulation, PX4 for flight control, network emulation principles, and empirical models for energy and computation. Experimental results demonstrate improved mission success under increasing jamming intensity, with success rates of 95%, 88%, and 75% for SiL-DT compared with 85%, 65%, and 40% for the baseline at jamming intensities of 0.2, 0.5, and 0.8, respectively.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat5_02"
    },
    {
      "id": "FrAT5.3",
      "paperId": "236",
      "title": "﻿Unified Grid Evaluation of IMU-Based Gait Event Detection: Algorithms, Sensor Locations, and Robustness to Perturbations",
      "session": "FrAT5",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526103",
          "name": "Park, Jihwan",
          "affiliation": "Sejong University"
        },
        {
          "id": "526137",
          "name": "Yang, Hyungseung",
          "affiliation": "Sejong University"
        },
        {
          "id": "526139",
          "name": "Kim, Gahyun",
          "affiliation": "Sejong University"
        },
        {
          "id": "526132",
          "name": "Lim, Taesoo",
          "affiliation": "Sejong University"
        },
        {
          "id": "177231",
          "name": "Kang, Brian Byunghyun",
          "affiliation": "Sejong University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Rehabilitation Robot",
        "Exoskeleton Robot"
      ],
      "abstract": "﻿Practical deployment of inertial measurement unit (IMU)-based gait event detection requires choices in sensor placement, signal channel, algorithm, and robustness to perturbations, yet existing studies address these dimensions individually. This study compares 5 sensor locations × 9 channels × 4 algorithms (TB, prominence-adaptive TB, BPF, template matching) on 4 normal-gait subjects, and further analyzes 5 single perturbations, 4 compound scenarios, and 9-channel 1D-CNN and 1D-LSTM via Leave-One-Subject-Out (LOSO) 4-fold cross-validation. In the grid evaluation, adaptive prominence thresholding produced statistically significant differences from fixed thresholding in 30 of 90 cells (Wilcoxon p < 0.05), most prominently on non-standard channels (Acc, Euler). BPF was the most robust to noise and DC bias. The product of single-perturbation degradation ratios matched the measured compound degradation within 0.03, suggesting a multiplicative relationship within the tested range. Both 9-channel deep models exceeded single-channel simple algorithms by +0.09 to +0.17 F1, with LSTM more stable in out-of-sample generalization than CNN. The results yield accuracy-first, robustness-first, and simplicity-first recommendations for IMU-based gait detection system design.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat5_03"
    },
    {
      "id": "FrAT5.4",
      "paperId": "580",
      "title": "Development of Robot Control System Using Computer Vision Based Finger Gesture Recognition",
      "session": "FrAT5",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528750",
          "name": "Goto, Kohei",
          "affiliation": "Kitami Institute of Technology"
        },
        {
          "id": "190759",
          "name": "Ravankar, Abhijeet",
          "affiliation": "Kitami Institute of Technology"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Approximately 1% of the global population requires mobility support, yet conventional joystick-controlled wheelchairs remain difficult to be operated for individuals with severe neuromuscular disorders. Although alternative interfaces such as EEG, eye-gaze, EMG, and wearable sensors have been investigated, they frequently suffer from latency, high training overhead, unintended command triggers, or physical discomfort. Similarly, state-of-the-art deep-learning based hand gesture recognition often demands substantial computational resources. To address these limitations, this study proposes a lightweight, non-contact robot control system based on finger gesture recognition utilizing residual physical functions. The system extracts spatial features by combining physical color markers with a custom computer vision pipeline consisting of hand segmentation, centroid detection, and the Hough Transform. To avoid relying solely on the classification accuracy of the neural networks, a frame differencing algorithm is integrated into the decision-making process, thereby ensuring robust control even during occasional prediction errors. Operating in indoor environments with stable lighting, this hybrid framework eliminates the need for complex illumination compensation or heavy neural networks, providing a computationally efficient, stable, and intuitive solution to enhance user independence and overall Quality of Life.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat5_04"
    },
    {
      "id": "FrAT5.5",
      "paperId": "178",
      "title": "Real-Time Simultaneous Estimation of Direction and Distance of Warning Sounds Using Two Microphones for Hearing Assistance",
      "session": "FrAT5",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525986",
          "name": "Shiratori, Shodai",
          "affiliation": "Meiji University"
        },
        {
          "id": "525987",
          "name": "Izumi, Takuto",
          "affiliation": "Meiji University"
        },
        {
          "id": "179084",
          "name": "Itami, Taku",
          "affiliation": "Meiji University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Biomedical Instruments and Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "In recent years, the immediate recognition of warning and environmental sounds occurring in traffic environments and daily life spaces has become an important issue for ensuring the safety of individuals with hearing loss. Therefore, this study proposes a real-time sound source localization model capable of simultaneously estimating the direction and distance of warning sounds to assist people with hearing loss. This model uses only two microphones as a minimal configuration. By integrating time difference of arrival (TDOA) and interaural level difference (ILD) within a CRNN-based framework, it simultaneously estimates the direction and distance of the sound source. Specifically, it calculates the sound source direction through time difference of arrival (TDOA) estimation based on the generalized cross-correlation phase transform method, and combines this with a distance estimation method based on the interaural level difference (ILD) between the micro phones. As a result, the proposed method showed stable direction estimation performance under real environmental conditions and achieved a distance estimation error of 0.15 0.81m under real-environment conditions. Furthermore, it was confirmed to be compatible with real-time visual presentation. The contribution of this study lies in the construction of a sound source localization model capable of simultaneously estimating the direction and distance of warning sounds with a minimal microphone configuration and computational load.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat5_05"
    },
    {
      "id": "FrAT6.1",
      "paperId": "618",
      "title": "﻿Process and Alignment-Aware Pick-And-Place Automation with Two Humanoid Dual-Arm Mobile Manipulators",
      "session": "FrAT6",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528800",
          "name": "Park, Woong-hee",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "193164",
          "name": "Joe, Hyun-Min",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "﻿This paper proposes a process- and alignment-aware pick-and-place automation system for practical manufacturing environments using two RB-Y1 humanoid upper-body dual-arm mobile manipulators. The system implements an inbound/outbound workflow in which the inbound robot transfers products from a rack to a conveyor, and, after drilling and vision inspection, the outbound robot inserts conveyor products into target rack slots. A ZED RGB-D camera and YOLO-based object detection estimate the product class and 3-D center position, while AprilTag-based conveyor/rack localization and camera-to-base transformation generate grasp and place target poses. A process-state-based task decision logic determines the grasping arm, target rack, target slot, approach direction, and placement offset from the product class, OK/NG inspection state, lateral position on the conveyor, and rack-slot occupancy. To handle mobile-base yaw misalignment, relative yaw estimated from conveyor/rack markers is reflected in wrist/end-effector orientation commands as marker-based alignment compensation. Experiments with two RB-Y1 robots achieved success rates of 20/20 for inbound tasks and 19/20 for outbound tasks. In conveyor grasping, stable grasps were achieved under relative yaw errors up to 35° when compensation was applied. These results verify the applicability of the proposed system to manufacturing-process automation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat6_01"
    },
    {
      "id": "FrAT6.2",
      "paperId": "489",
      "title": "Digital-Twin Fine-Tuned RL Planning with BEV Traversability Cost Maps for Quadruped Navigation in Unstructured Outdoor Environments",
      "session": "FrAT6",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528249",
          "name": "Sohn, Minsung",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "272173",
          "name": "Joe, Hangil",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper presents a hierarchical navigation framework for a quadruped robot in unstructured outdoor environments. Depth-derived geometric features and SegFormer-based semantic costs are fused into a unified Bird's-Eye-View (BEV) traversability cost map. On top of this map, a discrete trajectory-bank planner is trained with Proximal Policy Optimization (PPO) to select velocity commands. To balance general navigation capability with site-specific adaptation, the high-level policy is first pre-trained in a procedurally generated outdoor environment and then fine-tuned in a photogrammetry-based digital twin of the deployment site to adapt it to the target domain. A frozen low-level locomotion policy executes the selected command, decoupling navigation from motion control. On unseen digital-twin sites, the framework outperformed both baselines on two unstructured environments, achieving up to an 82.5% improvement in success rate and a 59.9% improvement in path efficiency over the pre-trained-only policy. On a physical quadruped at the target site, fine-tuning in the digital twin improves goal-reaching over the pre-trained-only policy, giving preliminary evidence that digital-twin fine-tuning benefits real-world navigation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat6_02"
    },
    {
      "id": "FrAT6.3",
      "paperId": "47",
      "title": "Experimentally Validated Dynamic FEM-Based Modeling of a Pneumatic Morphing Soft Quadrotor",
      "session": "FrAT6",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "243487",
          "name": "Sumathy, Vidya",
          "affiliation": "Luleå University of Technology"
        },
        {
          "id": "505330",
          "name": "Labra Caso, Fernando",
          "affiliation": "Luleå University of Technology"
        },
        {
          "id": "307616",
          "name": "Ferrentino, Pasquale",
          "affiliation": "Vrije Universiteit Brussels"
        },
        {
          "id": "433495",
          "name": "Haluska, Jakub",
          "affiliation": "Luleå University of Technology"
        },
        {
          "id": "101955",
          "name": "Vanderborght, Bram",
          "affiliation": "Vrije Universiteit Brussel"
        },
        {
          "id": "105882",
          "name": "Nikolakopoulos, George",
          "affiliation": "Luleå University of Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Control Devices and Instruments"
      ],
      "abstract": "This work presents an experimental evaluation of a finite-element model of the Pneumatic Morphing Soft Quadrotor (PMSQ) arm components and validates the model against real-time experiments under dynamic conditions. The PMSQ has four soft pneumatically actuated arms that deflect under differential chamber pressures to enable in-flight morphing. The PMSQ has four soft pneumatically actuated arms that deflect under differential chamber pressures to enable in-flight morphing. The pneumatic arm is modeled in SOFA and consists of an hyperelastic actuator and a linear-elastic spine. To validate the model, real-time experiments are conducted on the physical soft arm, which is part of the PMSQ, actuating one arm at a time and recording the arm's base and tip poses using Vicon under commanded pressure cycles and varying propeller thrust. Similar experiments are also conducted using the soft arm of PMSQ SOFA model in the simulation. Experimental and simulated data are then processed to compute 3D arm deflection and orientation, and the results are compared to assess the SOFA model’s accuracy under pneumatic actuation and aerodynamic loading. Comparison results show strong alignment in deformation and deflection across axes, confirming the model’s accuracy for configuration-dependent response under pneumatic actuation and aerodynamic loading. Thus, the validated finite-element model provides a basis for quantifying configuration-dependent aero-structural coupling under aerodynamic disturbances for future morphing-flight studies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat6_03"
    },
    {
      "id": "FrAT6.4",
      "paperId": "444",
      "title": "Bipedal Locomotion Control of a Snake-Like Robot Via Velocity-Constrained Deep Reinforcement Learning",
      "session": "FrAT6",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "335890",
          "name": "Kimoto, Tsuyoshi",
          "affiliation": "Osaka Metropolitan University"
        },
        {
          "id": "329681",
          "name": "Yamano, Akio",
          "affiliation": "Osaka Metropolitan University"
        },
        {
          "id": "368614",
          "name": "Iwasa, Takashi",
          "affiliation": "Osaka Metropolitan University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Control Theory and Applications"
      ],
      "abstract": "Snake-like robots exhibit high adaptability through various locomotion modes, but conventional methods face physical limitations in complex three-dimensional environments due to continuous ground contact. Serpentine and rolling motions require substantial clearance, making it difﬁcult to traverse narrow spaces or overcome high vertical steps. To address these limitations, this paper proposes a novel bipedal walking mode for a slender, multi-link snake-like robot. This mode minimizes the robot’s footprint and enhances its step-over capability without requiring dedicated parts or altering the hardware conﬁgurations needed for other gaits. To control this highly nonlinear system under unknown environment variations, we employ deep reinforcement learning via Proximal Policy Optimization within the Genesis physics engine. A robust locomotion policy is developed using a two-stage training approach that transitions from standing to walking, integrated with domain randomization on ground bumps. Simulation results demonstrate that incorporating a soft-penalty pre-training phase, followed by strict joint constraints, successfully yields a stable walking policy capable of enduring rough terrains.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat6_04"
    },
    {
      "id": "FrAT6.5",
      "paperId": "309",
      "title": "State-Based Posture Adjustment Control for Continuous Transverse Ledge Brachiation Robots",
      "session": "FrAT6",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526928",
          "name": "Lin, Yen-Jui",
          "affiliation": "National Taiwan University of Science and Technology"
        },
        {
          "id": "526947",
          "name": "Pangestu, Reno",
          "affiliation": "National Taiwan University of Science and Technology"
        },
        {
          "id": "138977",
          "name": "Lin, Chi-Ying",
          "affiliation": "National Taiwan University of Science and Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing",
        "Control Theory and Applications"
      ],
      "abstract": "This paper presents a state-based motion planning and posture adjustment strategy for a transverse ledge brachiation robot that moves horizontally across a wall ledge. Unlike conventional bar brachiation, ledge brachiation relies on partial force closure, which allows small gripper slips and body yaw errors to accumulate over repeated cycles, eventually resulting in a collision or fall. This proposed study consists of a compact symmetric robot model, a four-phase finite-state gait, phase-dependent trajectory generation, wrist-based body posture compensation, and a posture adjustment phase for grasping depth compensation. This additional contribution takes the form of a depth/yaw release quality parameter that is specifically established by the two grippers, triggering corrective action before the next hand release. The controller determines swing timing, pre-impact preparation, grasp completion, and release quality by combining joint feedback, gripper hard-contact dynamic information, inertial measurement data, and distance measurements. The proposed system is validated through simulations using PyBullet physics engine. The simulation results demonstrate that without depth compensation control, the gripper gradually drifts toward the wall, resulting in a bottom-side ledge collision. The proposed posture compensation strategy assists the robot to maintain a stable grasping depth within the commanded range and complete 108 continuous brachiation cycles over a 17-meter distance in 150 seconds. The cumulative COT decreases from the start-up peak of 24.7 to 2.37 over long-distance locomotion under the simulation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat6_05"
    },
    {
      "id": "FrAT6.6",
      "paperId": "145",
      "title": "Hybrid Attention Estimation Pipeline for Adaptive HRI Using an Expressive Robotic Head",
      "session": "FrAT6",
      "date": "2026-10-30",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524619",
          "name": "Moraes, Pablo",
          "affiliation": "Universidad Tecnologica Del Uruguay"
        },
        {
          "id": "525659",
          "name": "RodrÍguez Espinosa, Mónica Alexandra",
          "affiliation": "Universidad Tecnológica Del Uruguay"
        },
        {
          "id": "525667",
          "name": "Peters, Christopher",
          "affiliation": "Ostfalia University Wolfenbüttel"
        },
        {
          "id": "351948",
          "name": "Jacobs Sodre Pereira, Hiago",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "151578",
          "name": "Doernbach, Tobias",
          "affiliation": "Ostfalia University of Applied Sciences"
        },
        {
          "id": "397911",
          "name": "Guterres, Bruna de Vargas",
          "affiliation": "Universidad Technologica Del Uruguay"
        },
        {
          "id": "270442",
          "name": "Grando, Ricardo",
          "affiliation": "Federal University of Rio Grande"
        }
      ],
      "keywords": [
        "Human-Robot Interaction",
        "Robotic Applications",
        "Robot Vision"
      ],
      "abstract": "This paper presents an applied case study on visual attention estimation for human-robot interaction using an expressive robotic head based on the InMoov ecosystem. The proposed pipeline combines a fast geometric perception layer with an independent semantic layer based on a vision-language model. The geometric layer provides high-frequency face and head-pose information and drives the finite state machine for real-time interaction regulation, including activation, waiting, resumption, and return to rest. In parallel, the semantic layer receives raw egocentric camera frames and produces contextual labels related to attention toward the robot, phone use, or attention elsewhere. The semantic layer is not used as a direct control signal; it is logged as an independent observer for post-hoc comparison and ambiguity analysis. The system was evaluated with 10 participants across 40 trials. Results show reliable interaction start across all trials, consistent pause behavior in the adaptive distraction condition using the geometric control layer, and non-redundant semantic labels for analyzing ambiguous interaction moments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat6_06"
    },
    {
      "id": "FrAT7.1",
      "paperId": "19",
      "title": "Acoustic-Based Bogie Health Monitoring: A Review for Edge AI Onboard Anomaly Detection",
      "session": "FrAT7",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "210929",
          "name": "Nicodeme, Claire",
          "affiliation": "Alstom"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing",
        "Control Devices and Instruments"
      ],
      "abstract": "Railway bogies are safety-critical subsystems whose condition directly affects vehicle stability, ride comfort, reliability, and maintenance cost. While vibration-based monitoring remains the industrial baseline, acoustic approaches are gaining interest for earlier detection of weak anomalies and easier integration into onboard architectures. This paper presents a deployment-oriented review of bogie health monitoring methods with a focus on acoustic anomaly detection under onboard Edge Artificial Intelligence (Edge AI) constraints. The paper first links major bogie failure mechanisms to their observable dynamic and acoustic signatures, then compares the main sensing modalities - vibration, airborne acoustics, and acoustic emission - from the viewpoint of field deployability. It subsequently reviews anomaly detection methods compatible with embedded execution, including compact time-frequency representations, lightweight convolutional neural networks, autoencoders, generative models, and classical outlier-detection algorithms. Beyond a narrative synthesis, the paper proposes (i) a deployment-oriented taxonomy of sensing and inference options, (ii) a comparative framework for Edge AI-compatible approaches, and (iii) practical design guidelines for balancing detection challenges. Compact acoustic representations combined with lightweight models currently provide the most realistic path toward scalable, real-time onboard bogie monitoring.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat7_01"
    },
    {
      "id": "FrAT7.2",
      "paperId": "280",
      "title": "Comparative Study of Neural Network and Physics-Informed Models for Leak Localization in Main Pipelines",
      "session": "FrAT7",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526212",
          "name": "Satybaldina, Dana",
          "affiliation": "Department of Systems Analysis and Control, L.N. Gumilyov Eurasian National University"
        },
        {
          "id": "526213",
          "name": "Shmitov, Nurbol",
          "affiliation": "Department of Systems Analysis and Control, L.N. Gumilyov Eurasian National University"
        },
        {
          "id": "526214",
          "name": "Teshebayev, Nurdaulet",
          "affiliation": "Department of Artificial Intelligence and Big Data, Al-Farabi Kazakh National University"
        },
        {
          "id": "526215",
          "name": "Kulniyazova, Korlan",
          "affiliation": "Department of Systems Analysis and Control, L.N. Gumilyov Eurasian National University"
        },
        {
          "id": "526216",
          "name": "Zakarina, Aina",
          "affiliation": "Department of Systems Analysis and Control, L.N. Gumilyov Eurasian National University"
        },
        {
          "id": "526217",
          "name": "Kissikova, Nurgul",
          "affiliation": "Department of Systems Analysis and Control, L.N. Gumilyov Eurasian National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing",
        "Process Control Systems"
      ],
      "abstract": "Main oil and gas pipelines are critical infrastructure facilities whose reliability and operational safety depend on effective monitoring technologies. With the digital transformation of the oil and gas industry, rapid leak detection and accurate leak localization are increasingly important for reducing economic losses, improving industrial and environmental safety, and minimizing emergency risks. This study investigates leak location determination in a main pipeline using hydraulic parameters measured at control points along the pipeline. A dynamic simulation model of the pipeline system was developed in MATLAB Simulink using the Simscape Fluids library to generate the experimental dataset. Leak scenarios were simulated at five fixed locations: 44, 60, 70, 90, and 99 km. Three models were evaluated: a multilayer perceptron (MLP), a cascade-forward artificial neural network (Cascade-forward ANN), and a physics-informed neural network (PINN). Pressure and flow rate values from multiple pipeline sections, together with inlet and outlet boundary conditions, were used as input features. Comparative analysis based on RMSE and MAE showed that the PINN model achieved the highest localization accuracy for the initially held-out 70 km location with the lowest prediction error (RMSE = 2.1009 km, MAE = 1.8460 km). Additional leave-one-location-out validation and ablation experiments were conducted to assess spatial generalization and the contribution of the physics-based constraint. The ablation results showed that incorporating the mass-balance constraint reduced the localization error in the primary evaluation setting. The overall results demonstrate the effectiveness of combining data-driven learning with physics-based regularization for pipeline leak localization under transient hydraulic conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat7_02"
    },
    {
      "id": "FrAT7.3",
      "paperId": "358",
      "title": "Optimal-Control-Based Training of Neural ODEs with Turnpike Regularization and Adaptive Gradient Descent",
      "session": "FrAT7",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527723",
          "name": "Sanngai, Niyata",
          "affiliation": "Chiang Mai University"
        },
        {
          "id": "527750",
          "name": "Warwicker, John Alasdair",
          "affiliation": "Lancaster University Leipzig"
        },
        {
          "id": "527752",
          "name": "Wongkaew, Suttida",
          "affiliation": "Department of Mathematics, Faculty of Science, Chiang Mai University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Control Theory and Applications",
        "Information and Networking"
      ],
      "abstract": "Neural Ordinary Differential Equations (Neural ODEs) provide a continuous-depth framework for learning nonlinear dynamical transformations, but their training can be hindered by nonconvex loss landscapes and unstable adjoint gradients. We formulate Neural ODE training as a finite-horizon optimal control problem and introduce a Turnpike-inspired trajectory-tracking term that guides the continuous-depth flow toward prescribed target states. For the resulting Pontryagin-based gradient system, we propose Adaptive Gradient Descent (AdapGD), which uses a one-time bisection initialization followed by curvature-based step-size updates without repeated line searches. The method is evaluated on Two Rings, Two Moons, and Two Spirals classification problems and compared with Adam and vanilla gradient descent over five random seeds. AdapGD generally achieves lower terminal loss, faster attainment of the target accuracy, and more reliable geometric separation. On Two Spirals, it achieves an 80% success rate for accuracy above 85%, compared with 60% for Adam and 0% for vanilla gradient descent.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat7_03"
    },
    {
      "id": "FrAT7.4",
      "paperId": "632",
      "title": "An Online Scheduling Method for Car Sharing Service by Vehicle Dispatch and Customer Assignment Optimization",
      "session": "FrAT7",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "531841",
          "name": "Kobayashi, Hayato",
          "affiliation": "Osaka University"
        },
        {
          "id": "166474",
          "name": "Sakurama, Kazunori",
          "affiliation": "The University of Osaka"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Civil and Urban Control Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Existing studies on vehicle dispatch optimization for car-sharing systems generally assume that reservation information for all users is known in advance. Consequently, online dispatching decisions for newly arriving requests during operation—such as whether to accept a request and which vehicle or station to assign—have not been sufficiently investigated. To address this issue, this study proposes an online vehicle assignment method by extending an existing optimization model. The proposed method fixes the assignments of users with advance reservations and sequentially processes newly arriving requests in an online manner. Specifically, variables representing request rejection and the associated rejection costs are newly introduced, enabling simultaneous optimization of both acceptance/rejection decisions and vehicle assignments.The results demonstrate that the vehicle dispatch optimization problem in an online environment can be effectively solved without significantly modifying the framework of the existing model.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat7_04"
    },
    {
      "id": "FrAT7.5",
      "paperId": "164",
      "title": "GRACE: Lightweight Symbolic Verification and Local Repair for LLM Task Planning in Embodied Agent",
      "session": "FrAT7",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony B, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "302754",
          "name": "Bui, Trung Minh",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "319740",
          "name": "Moon, JongSul",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "185955",
          "name": "Kim, YoungOuk",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "203067",
          "name": "Shin, Dongin",
          "affiliation": "Korea Electronics Technology Institute"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": ": Large language models are now the default cognitive core of embodied household agents, yet high taskcompletion rates are typically sustained by execution-time retry loops that paper over plans failing symbolic precondition checks. We present GRACE (Grounded Repair-and-Critique Embodied planner), a single-LLM planner that gates each sub-plan through a rule-based symbolic precondition verifier (∼250 lines of Python, zero tokens) and, on rejection, regenerates only the suffix of the failed sub-goal. We evaluate on the 38-task AI2-THOR benchmark across two open-weight Ollama models under a leak-free leave-one-out retrieval protocol, necessary because the seed memory is built from the same file used for evaluation: letting it return a test task’s own reference plan inflates completeness by 10–14 pp. Under the corrected protocol the verifier’s contribution is plan validity rather than coverage: strict-precondition satisfaction rises +16 pp over the one-shot baseline on llama3.2 (0.76 → 0.92) and +13 pp on qwen2.5:7b (0.83 → 0.96), while completeness only matches the strongest baselines, at 7–8× the token cost. We also diagnose two benchmark-protocol failure modes — a refine-overwrite bug and a cold-start emission instability — and give minimal mitigations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat7_05"
    },
    {
      "id": "FrAT8.1",
      "paperId": "45",
      "title": "Automated Adaptive Threshold Optimization for Robust Particle Detection in Wafer Inspection (I)",
      "session": "FrAT8",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524492",
          "name": "Park, Jaehyun",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "168073",
          "name": "SeungTaek, Kim",
          "affiliation": "KITECH"
        },
        {
          "id": "470730",
          "name": "Yoo, Young-Jun",
          "affiliation": "KITECH"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Particle detection on semiconductor wafers is essential for ensuring product quality and yield in advanced manufacturing processes; however, conventional threshold-based segmentation methods depend on manually tuned parameters and are highly sensitive to illumination variations and process conditions. While deep learning and generalpurpose segmentation models, such as the Segment Anything Model (SAM), have shown strong performance in generic vision tasks, their reliance on large labeled datasets and limited robustness in detecting small-scale defects restrict their applicability in industrial environments. This study proposes an automated adaptive threshold optimization method for wafer particle and scratch detection that systematically determines optimal threshold parameters by jointly exploiting local and global image characteristics. The proposed approach eliminates the need for manual tuning, pre-trained models, and prompt-based inputs, while maintaining low computational complexity suitable for real-time inspection. Experimental results on wafer defect datasets demonstrate that the proposed method consistently outperforms conventional thresholding techniques and SAM in detecting small particles and elongated defects under varying illumination and manufacturing conditions, providing a practical training-free solution for semiconductor wafer inspection.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8_01"
    },
    {
      "id": "FrAT8.2",
      "paperId": "263",
      "title": "EML Symbolic Policies for Embedded Robotic Control: A Compact, Interpretable Alternative to Deep RL for Slip Prevention (I)",
      "session": "FrAT8",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "465637",
          "name": "Song, Jisu",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "380903",
          "name": "Lee, Sangmoon",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Control Theory and Applications"
      ],
      "abstract": "We present a compact, interpretable alternative to deep reinforcement learning for embedded robotic control. Our policies are symbolic expressions evolved as directed-acyclic graphs of the Exp-Minus-Log (EML) operator, eml(x, y) = exp(x) − ln(y), which is universal enough to represent all elementary functions but parsimonious enough to encode a useful control law in a few hundred bytes. On two control tasks — CartPole-v1 and a four-finger slip-prevention task in a MuJoCo simulator — an EML policy matches or strictly dominates a PPO baseline trained under an identical wall-clock budget while being about 8× faster at raw inference and 80× smaller as deployable bytes. On the slip-prevention task an EML policy of 301 bytes achieves 43.8% success across an 8 × 4 mass–friction grid versus 28.1% for a PPO MLP of 24 KB, winning five scenarios and losing none. The learned policy is a single one-line formula that uses exactly four vibration features — one per finger chain — making the inductive bias of the task explicit in a way the PPO MLP is not.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8_02"
    },
    {
      "id": "FrAT8.3",
      "paperId": "282",
      "title": "OLIVE: Lightweight Latent Residual Reinforcement Learning for Vision-Language-Action Models Via Action Basis Projection (I)",
      "session": "FrAT8",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526250",
          "name": "Kim, Gibeom",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "380903",
          "name": "Lee, Sangmoon",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Vision-Language-Action (VLA) models possess powerful pre-trained representations for robotic manipulation; however, online reinforcement learning (RL) adaptation to new environments is computationally prohibitive, as it requires updating billions of parameters. In this paper, we propose OLIVE (Online Latent In-situ VLA Enhancement), a framework that performs PPO-based adaptation by injecting latent residuals into the hidden state of a 7B-scale OpenVLA backbone, while keeping the backbone entirely frozen. Specifically, a 256-dim latent code z is projected through a basis matrix constructed from the action token rows of the frozen LM head, generating a 4096-dim Delta h that is added to the backbone hidden state. This design constrains all perturbations to lie within the semantic action subspace already encoded by the language model. OLIVE trains only 300K parameters (0.004% of 7.3B total), and achieves 91.9% success rate (SR) on LIBERO-Spatial (+31.9pp over baseline), 71.4% on LIBERO-Goal (+1.4pp), and 50.0% on LIBERO-10 (+10.0pp). This work presents a novel direction for lightweight online VLA adaptation by repurposing the pre-trained structural knowledge of frozen LM heads for RL head design.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8_03"
    },
    {
      "id": "FrAT8.4",
      "paperId": "287",
      "title": "Beyond Condition-Mixed Evaluation: Label-Free Bearing Fault Diagnosis Via Synthetic Prototype Inference (I)",
      "session": "FrAT8",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526221",
          "name": "Kim, Dongju",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "526257",
          "name": "Yoo, Joonhyuk",
          "affiliation": "Daegu University"
        },
        {
          "id": "465374",
          "name": "Won, Hong-In",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "525874",
          "name": "Yun, Jun-Seok",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "465376",
          "name": "Yun, Jong Pil",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "482479",
          "name": "Kim, Min Su",
          "affiliation": "KITECH"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Acquiring labeled fault data across diverse operating conditions is costly and often impractical in industrial settings, as fault annotation requires specialized expertise. Against this background, two problems compound each other: models are typically evaluated under condition-mixed splits that share operating conditions between train and test, systematically overestimating generalization; and inference pipelines assume the availability of real labeled samples at deployment. We address both problems. Under a strict leave-one-condition-out (LOCO) protocol with multi-seed validation (N = 9 trials) on Paderborn, simple baselines scoring 0.81–0.82 under mixed evaluation drop by 9–13 points, and DANN-style adversarial training collapses to near-chance. Holding the learned representation fixed and varying only the classifier, we show that a label-free synthetic prototype — averaged over CA-Synth samples generated across all training conditions — significantly surpasses the labeled real-prototype classifier (Δ = +0.066, p = 0.0005; 9/9 trials in favor), matches RF/KNN/LogReg on average (p > 0.13), and achieves the largest advantage on the hardest unseen condition (+0.067 over RF). We attribute this to a training-condition bias-reduction effect: in cross-condition regimes, the structure of supervision matters more than its quantity. In practice, these results suggest that fault diagnosis can generalize to newly encountered operating conditions without requiring condition-specific data collection or labeling, thereby reducing the re-annotation burden as condition diversity increases.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8_04"
    },
    {
      "id": "FrAT8.5",
      "paperId": "685",
      "title": "Solar Panel Pose Estimation Using Stereo Vision and Time-Of-Flight Sensors (I)",
      "session": "FrAT8",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "534045",
          "name": "Lee, MyeongWoo",
          "affiliation": "Pukyong National Universitiy"
        },
        {
          "id": "534037",
          "name": "Jeong, Tae Young",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "534049",
          "name": "Joo, Moon Gab",
          "affiliation": "Pknu"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a robotic vision framework for estimating the five-degree-of-freedom (5-DOF) pose of photovoltaic solar panels for automated installation and grasping tasks. The proposed system uses an Intel RealSense D435 stereo depth camera and a Synexens CS30 time-of-flight (ToF) depth camera as two independent depth sources, each of which fails under different conditions caused by specular reflection from the panel glass surface and by outdoor illumination. A YOLO-based instance segmentation network first localizes the individual photovoltaic cells in the RGB image, and the corresponding point cloud region of each depth sensor is passed to RANSAC plane fitting to obtain two independent 5-DOF pose estimates, one from each camera, together with their associated uncertainty. These two depth-based estimates are then combined using three sensor-fusion strategies, which are implemented and compared under the same test conditions: a random-walk Kalman filter that exploits temporal continuity across frames, a Covariance Intersection (CI) fusion that remains consistent when the cross-correlation between the two sensors errors is unknown, and a closed-form inverse-variance weighted fusion that assumes the two sensors errors are independent. The framework is intended to serve as the perception front end of an excavator-boom-mounted manipulator for unattended solar panel installation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8_05"
    },
    {
      "id": "FrAT8.6",
      "paperId": "686",
      "title": "Onboard Inference-Budget Analysis of Deep Reinforcement Learning for Catheter Cross-Section Alignment (I)",
      "session": "FrAT8",
      "date": "2026-10-30",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "534031",
          "name": "Hwang, Jae Jin",
          "affiliation": "Pukyong National University (PKNU)"
        },
        {
          "id": "525304",
          "name": "Kim, Yejin",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "465376",
          "name": "Yun, Jong Pil",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "534049",
          "name": "Joo, Moon Gab",
          "affiliation": "Pknu"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "Automated inspection of multi-lumen catheter cross-sections requires a canonical orientation, so rotational alignment is a necessary front-end step. On a constrained on-device system its cost depends not only on the latency of one evaluation but also on how many the policy spends before committing. We derive an oracle minimum action count by reverse breadth-first search on the residual-angle grid, then score six agents that pair DQN, DDQN, and D3QN with ε-greedy or NoisyNet exploration over 480 rollouts. Even the lowest-budget agent spends 55% more inferences than this minimum, so inference count is a deployment metric alongside model size.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8_06"
    },
    {
      "id": "FrAT8.7",
      "paperId": "687",
      "title": "Development of a Vision-Based Recognition and Tracking System for Moving Yard Tractor Identification in Port Environments (I)",
      "session": "FrAT8",
      "date": "2026-10-30",
      "start": "10:15",
      "end": "10:30",
      "room": "Symphony C, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "534034",
          "name": "Choi, Eunji",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "534049",
          "name": "Joo, Moon Gab",
          "affiliation": "Pknu"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "In this paper, we propose a video-based recognition and tracking framework to reliably identify the identification numbers of yard tractors in a port environment. Conventional license plate recognition systems target standardized plates, presenting limitations when applied to unstandardized yard tractor numbers. To address this, the proposed method maintains temporal information using object detection and multi-object tracking, applying OCR, candidate extraction, and time-axis Frame Voting. Furthermore, Track Merging using OCR information and temporal connectivity is introduced to mitigate single-frame OCR errors and ID Switching. Experimental results using actual port video data demonstrated that 129 out of 140 yard tractors were correctly recognized, achieving an accuracy of 92.14%. The proposed method is confirmed to be effective for stable yard tractor identification in moving and low-resolution environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat8_07"
    },
    {
      "id": "FrAT9.1",
      "paperId": "556",
      "title": "Development of an Autonomous Mobile Robot for Both Indoor and Outdoor Environments",
      "session": "FrAT9",
      "date": "2026-10-30",
      "start": "09:00",
      "end": "09:15",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "514007",
          "name": "Fushimi, Yuki",
          "affiliation": "Shonan Institute of Technology"
        },
        {
          "id": "503186",
          "name": "Yuzawa, Satoshi",
          "affiliation": "Shonan Institute of Technology"
        },
        {
          "id": "135459",
          "name": "Inoue, Fumihiro",
          "affiliation": "Shonan Institute of Technology"
        },
        {
          "id": "158740",
          "name": "Ohno, Hidetaka",
          "affiliation": "Shonan Institute of Technology"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "For the purpose of autonomous navigation using LiDAR SLAM, a robot system was designed and built for operating in both indoor and outdoor environments using a common algorithm by applying light-resistant LiDAR. By performing 3D range-finding and adding 9-axis IMU measurements, the accuracy of displacement measurement was improved, demonstrating that map construction and autonomous navigation can be performed with sufficient accuracy. As a result, the realization of autonomous navigation was verified on sloped surfaces, slightly uneven paved surfaces, tiled/blocked surfaces, and pathways with steps, demonstrating its effectiveness particularly outdoors. With this robot system, maps of continuous routes can be generated across indoors and outdoors. As a demonstration of continuous autonomous navigation, it is possible to travel along a route that passes through building exits. For travel through building exits, it is necessary to detect transparent glass doors and slopes to avoid steps as adjustments, and a solution of adding this information to the map data was presented.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat9_01"
    },
    {
      "id": "FrAT9.2",
      "paperId": "615",
      "title": "A Two-Loop Finite-State-Machine Controller with Bounded-Retry Verification for Resource-Constrained Autonomous Marine Debris Investigation",
      "session": "FrAT9",
      "date": "2026-10-30",
      "start": "09:15",
      "end": "09:30",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523053",
          "name": "Rajagopalan, Advaith",
          "affiliation": "BASIS Independent Silicon Valley"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "Persistent marine debris monitoring requires au- tonomous surface vehicles (ASVs) that detect, investigate, and validate floating targets autonomously. ASV autonomy often takes it for granted that perception operates reliably; however, a resource-constrained ASV that stages a thermal proposal before an expensive vision-based confirmation must deal with the possibility of ambiguous detections. We introduce a two-loop finite-state-machine (FSM) controller—an exploration loop to cover an area and an investigation loop to validate a detection— where the key idea is to bound the number of rotational retries in verification. Such a verification stage allows for distinguishing be- tween confirmation (DONE) and verification rejection (ABORT) while giving an ambiguous detection a chance of retry. Rather than fixing design parameters arbitrarily, we explore their effect through an experimental voting threshold sweep, an analysis of the failure mode of ABORT outcomes from 46 trials of the FSM controller in a dry run, and a coverage-efficiency framework. The dry run yields 35 DONE (76%) and 11 ABORT (24%) outcomes, demonstrating simulation-level correctness of the FSM logic; we show that every one of the 11 observed ABORTs stems from a verification rejection rather than a navigation or state-transition failure. On-water mission validation is the immediate next step of the work.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat9_02"
    },
    {
      "id": "FrAT9.3",
      "paperId": "604",
      "title": "Direction-Decomposed Force and Sound Evaluation of Side Bumpers for Door Operation by a Powered Wheelchair: A Low-Cost Rigid Bumper versus a Roller and a Tensioned Belt",
      "session": "FrAT9",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "09:45",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525318",
          "name": "Ida, Yosuke",
          "affiliation": "University of Tsukuba"
        },
        {
          "id": "110100",
          "name": "Date, Hisashi",
          "affiliation": "University of Tsukuba"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Rehabilitation Robot",
        "Robotic Applications"
      ],
      "abstract": "Driving a powered wheelchair through a doorway often brings the side of the chair into contact with the door or frame. Such contact produces two distinct force components: a normal (pressing) force that governs the crushing and pinching risk, and a tangential (backward) force that opposes forward motion. Previous rolling-element accessories were designed mainly to reduce the tangential component. In this paper we evaluate four side bumpers --- a 3D-printed roller representing the conventional rolling element, a low-cost rigid bumper made of a sill-slide seal on a paulownia bar, a flat belt on cam followers, and the same belt under tension --- by decomposing the contact force measured with a four-axis load cell into normal and tangential components, and by also recording the contact sound. Four door types (outward, heavy outward, inward, and sliding) were tested on a WHILL CR2 at 0.1--0.5~m/s. The rigid wood bumper produced the lowest normal force in every condition (median peak about 1.3~kgf, roughly one third of the roller) and was acoustically quiet, while the roller did not reduce the normal force and was the loudest. The tensioned belt was clearly better than the roller, but its prototype showed larger trial-to-trial scatter. The results indicate that a simple, low-cost rigid bumper is an effective alternative to the conventional roller for reducing the safety-relevant contact force.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat9_03"
    },
    {
      "id": "FrAT9.4",
      "paperId": "490",
      "title": "Nonlinear Opinion Dynamics for Fast Collective Decision-Making in Multi-Robot Systems",
      "session": "FrAT9",
      "date": "2026-10-30",
      "start": "09:45",
      "end": "10:00",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "451621",
          "name": "Sung, Eunwoo",
          "affiliation": "KAIST"
        },
        {
          "id": "528378",
          "name": "Kim, Sohyun",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "161438",
          "name": "Shin, Hyo-Sang",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "In this paper, we study fast collective decision making in multi-robot systems, where a team must quickly commit to a common intent among a small number of discrete maneuver choices. Examples include a swarm deciding which side of an obstacle to pass and vehicles deciding who yields and who proceeds at a shared junction. In such settings, a decision layer that is slow, weak, or prone to flip-flopping can undermine the mission regardless of the quality of the low-level controller. We present a decentralized decision layer based on nonlinear opinion dynamics (NOD), in which cooperative inter-agent coupling shares local evidence and an attention parameter controls when weak preferences are amplified into a committed collective choice. The main contrast is with well-established linear consensus; it can make agents agree, but when the shared evidence is weak it converges to a low-magnitude opinion that remains below a decision threshold. NOD, by contrast, uses an attention-controlled bifurcation to turn the same weak bias into a fast threshold-crossing commitment. A deterministic simulation shows that cooperative NOD reaches a common committed decision under weak initial evidence, while linear consensus reaches agreement without commitment. An attention sweep further shows that the decision time decreases as attention increases and follows the trend predicted by the linearized dynamics.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat9_04"
    },
    {
      "id": "FrAT9.5",
      "paperId": "231",
      "title": "Real-Time Unsupervised Probabilistic Magnetic Disturbance Detection for Magnetometer-Based Heading Estimation",
      "session": "FrAT9",
      "date": "2026-10-30",
      "start": "10:00",
      "end": "10:15",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526128",
          "name": "Park, Jiwon",
          "affiliation": "Chungnam National University, Department of Autonomous Vehicle Systems Engineering"
        },
        {
          "id": "131396",
          "name": "Jung, Jongdae",
          "affiliation": "Chungnam National University"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Unmanned ground vehicles (UGVs) often use magnetometers as an absolute heading reference. However, magnetometer measurements are vulnerable to corruption by magnetic disturbances from nearby ferromagnetic structures and onboard electromechanical systems. Conventional threshold-based magnetic anomaly detectors such as the three-parameter AND-gate method of Lee et al. require platform-specific manual calibration. This paper proposes an unsupervised probabilistic magnetic disturbance detector based on a Temporal Convolutional Network with a Mixture Density Network (TCN-MDN) output head. The detector is trained only on undisturbed data, allowing the model to learn the temporal probability density of a four-dimensional feature sequence consisting of the latency-compensated cross-sensor angular velocity residual, horizontal magnetic field magnitude, lagged gyroscope angular velocity, and horizontal field magnitude derivative. During inference, the negative log-likelihood (NLL) under the learned Gaussian mixture is used as a continuous disturbance score. When the NLL exceeds a data-driven threshold, magnetometer-derived heading updates are rejected and heading is propagated by gyroscope integration. The system is deployed with TensorRT on a Jetson Orin Nano and operates in real-time at 100 Hz on a Clearpath Husky A300 UGV. Experimental results show reduced heading RMSE and peak heading error compared with the Lee et al. baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frat9_05"
    },
    {
      "id": "FrBT1.1",
      "paperId": "297",
      "title": "Finite-Time Spectral Observer",
      "session": "FrBT1",
      "date": "2026-10-30",
      "start": "15:40",
      "end": "15:55",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526410",
          "name": "Murakami, Madoka",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "319322",
          "name": "Kitamura, Tomoya",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "117320",
          "name": "Nakamura, Hisakazu",
          "affiliation": "Tokyo University of Science"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "Estimation of sinusoidal signals is fundamental in engineering, and finite-time observer-based methods have attracted attention owing to their fast convergence and robustness. However, homogeneous finite-time spectral observers have mainly been developed for DC and single-frequency components, while their extension to multiple sinusoidal components remains insufficient. This paper proposes a finite-time spectral observer (FTSpO) for estimating the amplitudes and phases of multi-sinusoidal signals with known frequencies. An explicit nonsingular similarity transformation is derived to convert the original state-space model into an observable canonical-form realization with a left-companion matrix, enabling direct application of a simple finite-time observer structure. Numerical simulations show that, even for a quasi-periodic signal, the proposed method estimates the output, amplitudes, and phases in finite time. In particular, convergence is achieved within 300 ms for quasi-periodic signals with a minimum frequency of approximately 1.41 Hz, the square root of 2.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt1_01"
    },
    {
      "id": "FrBT1.2",
      "paperId": "562",
      "title": "Real-Time Distance Estimation Method of Sudden Sound Source with Two Microphones",
      "session": "FrBT1",
      "date": "2026-10-30",
      "start": "15:55",
      "end": "16:10",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528724",
          "name": "Okubo, Shiori",
          "affiliation": "Meiji University"
        },
        {
          "id": "415307",
          "name": "Endo, Riku",
          "affiliation": "Aoyama Gakuin University"
        },
        {
          "id": "179084",
          "name": "Itami, Taku",
          "affiliation": "Meiji University"
        }
      ],
      "keywords": [
        "Multimedia Systems",
        "Biomedical Instruments and Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Globally, the prevalence of hearing loss is increasing, and ensuring that individuals with hearing impairment can detect sudden warning sounds―such as warning sirens of emergency vehicles or bicycle bells―is critical for their daily safety. Conventional methods for estimating sound source distance typically rely on large microphone arrays or deep learning techniques. However, these approaches suffer from substantial computational delays, a lack of real-time responsiveness, and excessive hardware resource requirements, making them impractical for wearable devices like smart glasses. To address these challenges, this paper proposes a novel, real-time distance estimation method for sudden sound sources using only two microphones without requiring machine learning. The proposed method utilizes the differences in decibel (dB) values between the two microphones to calculate the distance based on geometric acoustics. Furthermore, a three-step filtering algorithm is introduced to remove decibel overshoots and environmental noises caused by sudden acoustic signals. Experimental validations demonstrate that the proposed method significantly reduces estimation errors, achieving a 71% success rate within an error margin of 0.3 meters while maintaining real-time processing performance. These results confirm the effectiveness and feasibility of the method for low-resource smart glass applications.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt1_02"
    },
    {
      "id": "FrBT1.3",
      "paperId": "412",
      "title": "Pressure-Dependent Degradation Trend Modeling and RUL Estimation for Hinge Systems",
      "session": "FrBT1",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "16:25",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528228",
          "name": "Chiou, Huei-Cyuan",
          "affiliation": "National Taipei University of Technology"
        },
        {
          "id": "140997",
          "name": "Wu, Hsiu-Ming",
          "affiliation": "Department of Intelligent Automation Engineering, National Taipei University of Technology"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems"
      ],
      "abstract": "Machine learning and deep learning techniques have been widely applied in prognostics and health management (PHM) for degradation trend prediction (DTP) and remaining useful life (RUL) estimation. In addition to general machinery, accurate prediction is also critical for mechanical components such as laptop hinges. Hinge degradation is typically evaluated based on torque reduction relative to a predefined health indicator (HI) threshold. During the design-for-manufacturing (DFM) stage, conventional approaches for evaluating hinge torque adequacy rely heavily on empirical experience, which may lead to inaccurate assessments and unexpected failure when degradation exceeds the HI threshold. To address this issue, this study proposes a data-driven framework termed pressure value-marked bidirectional gated recurrent unit (PM-BiGRU). The proposed method incorporates the pressure value per unit friction surface area (pressure value) to characterize degradation under various loading conditions. A sequence-to-one (Seq2One) BiGRU architecture is adopted to model temporal dependencies and predict single-step degradation, providing stable and interpretable predictions. Experimental results based on hinge torque degradation datasets demonstrate that the proposed method effectively captures degradation trends and accurately estimates the corresponding RUL under varying pressure conditions, providing a robust evaluation tool for the DFM stage.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt1_03"
    },
    {
      "id": "FrBT1.4",
      "paperId": "641",
      "title": "Toward Extending Dynamical Network Biomarker-Based Pre-Disease State Detection Using a Temporal Filter Gate",
      "session": "FrBT1",
      "date": "2026-10-30",
      "start": "16:25",
      "end": "16:40",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "532019",
          "name": "Nakao, Yoshiki",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "408258",
          "name": "Nakakuki, Takashi",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Biomedical Instruments and Systems",
        "Control Theory and Applications",
        "Information and Networking"
      ],
      "abstract": "。本研究は動的ネットワークバイオマーカーの拡張を目指しています。 (DNB)ベースの検出は、以下の分子種に対して行われます。 十分な時系列データの取得は困難です。DNB 理論は病気が発症する前に早期警告サインを検出する 変動の特性増加に焦点を当て、 臨界近くの状態変数の部分集合の相関 移行点。しかし、従来のDNB解析では 長期かつ高解像度の時系列データが必要です。 これは分子種(例えば DNAとmiRNAです。この制限に対処するために、本研究が実施されました 時間フィルターゲート(TFG)ベースのアプローチを提案します。その TFGは時間的信号特性に基づいて抽出します 振幅ではなく変化を指し、 DNA反応回路。重要な概念は「捕獲」ӗ",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt1_04"
    },
    {
      "id": "FrBT1.5",
      "paperId": "210",
      "title": "Abkowitz-Based Gray-Box Identification and Prediction Analysis Using an IEC 62065-Based Container Ship Simulator",
      "session": "FrBT1",
      "date": "2026-10-30",
      "start": "16:40",
      "end": "16:55",
      "room": "Palace Hall, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525759",
          "name": "Kyung Bae, Lee",
          "affiliation": "Samsung Heavy Industries Co., Ltd"
        },
        {
          "id": "526083",
          "name": "Seongyeop, Choi",
          "affiliation": "Samsung Heavy Industries Co., Ltd"
        },
        {
          "id": "526082",
          "name": "Seongjun, Kim",
          "affiliation": "Samsung Heavy Industries Co., Ltd"
        }
      ],
      "keywords": [
        "Control Theory and Applications"
      ],
      "abstract": "Maneuvering prediction of container ships is important for the development and evaluation of model-based navigation and collision-avoidance algorithms. However, constructing an accurate maneuvering model is difficult when detailed hydrodynamic coefficients and maneuvering data are limited. This study investigates the applicability of an Abkowitz-based gray-box identification approach to container ship maneuvering prediction using limited maneuvering data. The model parameters are identified using acceleration/deceleration, turning-circle, and zig-zag maneuvering data generated from an IEC 62065-based container ship simulation model under noise-free and disturbance-free conditions. The trajectory-prediction performance of the identified model is examined through maneuvering simulations, including additional test cases not used in identification. In addition, the prediction range of the identified model is discussed by analyzing the accumulation of trajectory errors under repeated rudder actions and heading changes.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt1_05"
    },
    {
      "id": "FrBT2.1",
      "paperId": "495",
      "title": "Grid-Voltage-Sensorless State and Parameter Estimation for PFC Converters Using an Adaptive ESO",
      "session": "FrBT2",
      "date": "2026-10-30",
      "start": "15:40",
      "end": "15:55",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "405712",
          "name": "Park, Keunhoon",
          "affiliation": "Hanyang University"
        },
        {
          "id": "349323",
          "name": "Lee, Youngwoo",
          "affiliation": "Hanyang University ERICA"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Reliable state estimation and control performance in power factor correction (PFC) converter systems are frequently degraded by grid voltage fluctuations and parametric uncertainties. This article develops an extended state observer (ESO)-based adaptive framework capable of jointly reconstructing physical states and identifying uncertain hardware parameters without direct grid voltage sensing. The proposed ESO-based adaptive observer consists of an ESO that treats the grid voltage as an extended state variable and an adaptive update law that tracks parametric uncertainties. Simulations implemented in MATLAB/Simulink are conducted for validation. Simulation results show the proposed ESO-based adaptive observer significantly improves the accuracy of state and parameter estimation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt2_01"
    },
    {
      "id": "FrBT2.2",
      "paperId": "184",
      "title": "Sensorless Battery Temperature Estimation and Predictive Thermal Management Using EKF and MPC",
      "session": "FrBT2",
      "date": "2026-10-30",
      "start": "15:55",
      "end": "16:10",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526001",
          "name": "Baek, Hyeonmin",
          "affiliation": "Korea Advanced Institute of Science and Technology(KAIST)"
        },
        {
          "id": "519821",
          "name": "Jang, Byeonggwan",
          "affiliation": "KAIST"
        },
        {
          "id": "526008",
          "name": "Lee, Sieun",
          "affiliation": "KAIST"
        },
        {
          "id": "126125",
          "name": "Kim, Kyung-Soo",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "Lithium-ion batteries are highly sensitive to temperature variations, and excessive temperature rise can significantly degrade battery performance, lifetime, and safety. Although temperature sensors are commonly used in battery thermal management systems, direct temperature measurement is difficult in densely packed battery modules due to cost, installation limitations, and reliability concerns. To address this issue, this paper proposes a sensorless battery thermal management framework combining Extended Kalman Filter (EKF)-based temperature estimation and Model Predictive Control (MPC)-based cooling control. A lumped thermal model and a first-order equivalent circuit model were integrated to estimate battery temperature using only current and voltage measurements. In addition, observability analysis was performed to verify the feasibility of temperature estimation using measurable electrical signals. Based on the estimated temperature, MPC was employed to predict future thermal behavior and determine the optimal cooling intensity while minimizing unnecessary cooling energy consumption. The proposed framework was implemented in MATLAB/Simulink and validated under multiple discharge conditions. Simulation results demonstrated that the EKF could accurately estimate battery temperature despite model uncertainty and measurement noise. Furthermore, the MPC-based cooling strategy effectively reduced cooling energy consumption while maintaining acceptable thermal performance.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt2_02"
    },
    {
      "id": "FrBT2.3",
      "paperId": "121",
      "title": "Scenario-Based Q-Learning Model Predictive Control for Green Ammonia Production",
      "session": "FrBT2",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "16:25",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525650",
          "name": "Park, Hyun Min",
          "affiliation": "Ulsan National Institute of Science and Technology"
        },
        {
          "id": "405068",
          "name": "Oh, Tae Hoon",
          "affiliation": "UNIST"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Process Control Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Green ammonia production systems powered by intermittent renewable energy must meet periodic demand under tight unit and storage constraints. To control such a system effectively, we propose scenario-based Q-learning model predictive control (scQMPC), which augments a scenario-based stochastic model predictive control with a pre-trained Q-function as the terminal cost. The stochastic model predictive control component enforces hard state bounds within the prediction horizon and rejects short-term disturbances through a scenario fan sampled from a transition probability matrix, while the Q-function captures long-term stochasticity that extends beyond the prediction horizon. Simulation results on a 12-day rollout show that the proposed method outperforms nonlinear model predictive control, double deep Q-network, and deterministic Q-learning-based model predictive control baselines, achieving the lowest total cost and eliminating both ammonia tank overflow and periodic demand shortfall.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt2_03"
    },
    {
      "id": "FrBT2.4",
      "paperId": "427",
      "title": "Data-Driven Parameter Tuning Framework for Enhancing Accuracy of Refrigeration System Model",
      "session": "FrBT2",
      "date": "2026-10-30",
      "start": "16:25",
      "end": "16:40",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528057",
          "name": "Cho, Seung Hyun",
          "affiliation": "Seoul National University"
        },
        {
          "id": "463505",
          "name": "Byun, Jisung",
          "affiliation": "Seoul National University"
        },
        {
          "id": "528062",
          "name": "Kim, Chan",
          "affiliation": "Seoul National University"
        },
        {
          "id": "528071",
          "name": "Lee, Jongyeop",
          "affiliation": "Seoul National University"
        },
        {
          "id": "405162",
          "name": "Lee, Jong Min",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Process Control Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "This study investigates data-driven parameter tuning for improving the accuracy of physics-based simulation models of refrigeration systems. A physics-based model of the overall refrigeration system is developed in Dymola to describe the refrigeration process under varying operating conditions. To enhance the reliability and prediction accuracy of the model, parameter tuning strategies are explored by combining operational data with a simulation-based parameter estimation process. The tuning process focuses on identifying key parameters that significantly affect system performance and adjusting them to reduce discrepancies between simulation results and real operation data. In this study, pressure-drop parameters in the cooling-water network are selected and estimated using a reduced flow-network model. Candidate parameters are reduced through an identifiability analysis, and the selected parameters are estimated using differential evolution. Fixed and online parameter update strategies are compared using steady-state operation data. The results show that the online update strategy improves the prediction accuracy of the total cooling-water flow rate under time-varying operating conditions. The proposed framework provides a reliable basis for data-assisted calibration of physics-based refrigeration system models.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt2_04"
    },
    {
      "id": "FrBT2.5",
      "paperId": "74",
      "title": "Physics-Informed Relative Temperature Estimation for Battery Management Systems Via Lightweight GRU",
      "session": "FrBT2",
      "date": "2026-10-30",
      "start": "16:40",
      "end": "16:55",
      "room": "Cattleya, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523977",
          "name": "Kim, Youngseoung",
          "affiliation": "Hyundai MOBIS"
        },
        {
          "id": "523976",
          "name": "Lee, Hongjun",
          "affiliation": "Hyundai MOBIS"
        },
        {
          "id": "523978",
          "name": "Oh, Seungyeob",
          "affiliation": "Hyundai MOBIS"
        },
        {
          "id": "523981",
          "name": "Yang, Siwon",
          "affiliation": "Hyundai MOBIS"
        },
        {
          "id": "523979",
          "name": "Yoo, Younguk",
          "affiliation": "Hyundai MOBIS"
        },
        {
          "id": "524821",
          "name": "Byun, Jinsu",
          "affiliation": "Hyundai MOBIS"
        },
        {
          "id": "523998",
          "name": "Kim, Dongrak",
          "affiliation": "Hyundai MOBIS"
        }
      ],
      "keywords": [
        "Industrial Applications of Control",
        "Control Theory and Applications"
      ],
      "abstract": "Accurate cell-level thermal monitoring is essential for battery safety, power capability, and lifetime, but full sensor deployment is impractical in production battery packs. This paper proposes a sparse-sensing cell temperature estimator that anchors a compact GRU to a production-available reference temperature sensor. Instead of directly regressing absolute cell temperatures, the GRU estimates a reference-sensor-based relative-temperature vector, and the absolute cell temperatures are reconstructed using the measured reference temperature. A lumped thermal analysis shows that the ideal relative-temperature target corresponds to a deviation-subspace coordinate after removing the dominant common-mode component. The practical measurement anchoring is represented as a bounded additive term, and the resulting reduced deviation dynamics provide an input-to-state stability condition under bounded perturbations. The proposed method is validated on an automotive PHEV battery pack using vehicle driving profiles under active-cooling conditions at 10/10◦C, 25/25◦C, and 35/35◦C ambient/coolant temperatures, including a cooling ON-to-OFF transient and cases with intramodule temperature deviations exceeding 8◦C. Compared with an identical-capacity absolute-temperature baseline, the proposed estimator achieves sub-degree RMSE and reduces the maximum error from 4.17◦C to 1.82◦C. The trained model is also deployed on an Infineon AURIXTM TC387D automotive microcontroller, where inference completes within 2 ms per module and the onboard output matches the offline FP32 reference within 0.07◦C MAE.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt2_05"
    },
    {
      "id": "FrBT3.1",
      "paperId": "270",
      "title": "Vision-Based 2D Scan Generation for Obstacle Avoidance Using Floor Segmentation",
      "session": "FrBT3",
      "date": "2026-10-30",
      "start": "15:40",
      "end": "15:55",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523731",
          "name": "Lee, Hyunseo",
          "affiliation": "Handong Global University"
        },
        {
          "id": "525529",
          "name": "Yoo, Gunmin",
          "affiliation": "Handong Global University"
        },
        {
          "id": "525532",
          "name": "Gu, Hyunwoo",
          "affiliation": "Handong Global University"
        },
        {
          "id": "300170",
          "name": "Hwang, Sung Soo",
          "affiliation": "Handong Global University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "This extended abstract presents a monocular virtual scan generation method for indoor autonomous mobile robots. The proposed system segments floor regions from RGB camera images and converts non-floor pixels into approximate 2D scan observations through camera-calibrated lookup tables. The generated scan is published in a ROS-compatible range format and integrated with the Nav2 navigation stack for local obstacle avoidance. Experiments in a structured indoor corridor show that the method provides useful, but limited, obstacle cues without a dedicated LiDAR sensor. In controlled range-estimation trials, the absolute error remained within 0.261 m under static conditions. In a 10 m static frontal obstacle avoidance experiment, the robot completed 39 of 50 trials. These results suggest that monocular scan generation can be a lightweight sensing option for constrained indoor environments, while robustness under reflective floors, illumination changes, and broader obstacle conditions remains future work.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt3_01"
    },
    {
      "id": "FrBT3.2",
      "paperId": "386",
      "title": "YOLO-Based Chilli Pepper Detection and Classification in a Cloud-Assisted Robotic Harvesting System",
      "session": "FrBT3",
      "date": "2026-10-30",
      "start": "15:55",
      "end": "16:10",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527357",
          "name": "Shaybo, Ahmed Sharif",
          "affiliation": "Southeast University"
        },
        {
          "id": "466874",
          "name": "Liang, Han",
          "affiliation": "Southeast University"
        },
        {
          "id": "457276",
          "name": "Baig, Mohammad Abbas",
          "affiliation": "Southeast University, China"
        },
        {
          "id": "528011",
          "name": "SalahEldeen Mohammed Hassan, Almogdad",
          "affiliation": "Southeast University"
        },
        {
          "id": "527367",
          "name": "Sibtain, Muhammad",
          "affiliation": "Southeast University, China"
        },
        {
          "id": "527347",
          "name": "Qasem, Arfan Ali Mohammed",
          "affiliation": "Southeast University"
        },
        {
          "id": "527355",
          "name": "Jibreel, Alnoman Bashir Abdalla",
          "affiliation": "Southeast University"
        },
        {
          "id": "528012",
          "name": "Sann, Channvechhika",
          "affiliation": "Southeast University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "The growing global population has increased demand for automated agricultural harvesting systems to support higher food production. Although robotic harvesting offers a promising solution, many existing systems remain costly, computationally demanding, and operationally inefficient because a single robot must often perform plant-data acquisition, processing, detection, localization, and harvesting. Moreover, real-time onboard processing requires high-performance hardware, further increasing system cost and complexity. This paper proposes a cloud-assisted multi-robot system for chilli pepper harvesting that enables information sharing between a Data-Collection Robot (DCR) and Harvesting Robots (HARs). A cloud server processes, stores, and manages the collected data while coordinating inter-robot operations. The detection model was trained and evaluated using chilli pepper images captured under varied conditions, achieving reliable detection, classification, and localization performance. The system was validated in a simulated tabletop chilli pepper laboratory environment. During the experiment, the DCR captured plant data using a depth camera and transmitted it to the cloud server for processing and storage within a few seconds. The results demonstrate the feasibility, scalability, efficiency, and cost-effectiveness of the proposed cloud-assisted harvesting system.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt3_02"
    },
    {
      "id": "FrBT3.3",
      "paperId": "40",
      "title": "OSDAG: Online Scheduling for Efficient Multi-Robot Collaboration",
      "session": "FrBT3",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "16:25",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "368772",
          "name": "Nguyen Canh, Thanh",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        },
        {
          "id": "504471",
          "name": "Tran Viet, Thang",
          "affiliation": "Vietnam National University, Hanoi, University of Engineering and Technology"
        },
        {
          "id": "504388",
          "name": "Dinh Van, Phuc",
          "affiliation": "VNU University of Engineering and Technology"
        },
        {
          "id": "371214",
          "name": "Hoang, Van Xiem",
          "affiliation": "VNU - University of Engineering and Technology"
        },
        {
          "id": "102527",
          "name": "Chong, Nak Young",
          "affiliation": "Japan Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Coordinating heterogeneous multi-robot systems (MRS) for complex, long-horizon tasks requires both flexible high-level reasoning and efficient execution-time scheduling. Existing LLM-based approaches struggle to balance reasoning efficiency and execution flexibility. Flat sequential plans are efficient to generate but overlook parallel execution opportunities, while repeated LLM reasoning introduces high latency, and offline schedules may unnecessarily keep robots idle due to fixed execution orders. This paper presents OSDAG, a novel framework that resolves this trade-off by employing a Directed Acyclic Graph (DAG) as the central representation for multi-robot coordination, coupled with constraint-aware online scheduling. The LLM is typically invoked once as a semantic parser that decomposes a natural-language instruction into a dependency-annotated task graph encoding precedence relations, together with robot capability and resource-feasibility constraints. A lightweight online scheduler then dynamically dispatches dependency-ready tasks to their assigned robots as soon as they become idle, exposing available parallelism while preserving correctness. Experiments across five benchmark scenarios demonstrate that OSDAG achieves 5-15times faster reasoning time than dialogue-based methods, reduces makespan by up to 38% over sequential baselines, and maintains competitive success rates. Both simulation and real-world experiments on human-robot collaboration tasks validate the effectiveness and practicality of the proposed approach for efficient multi-robot coordination. The website and resources are available at url{http://thanhnguyencanh.github.io/LLM_DAG4MultiRobot}",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt3_03"
    },
    {
      "id": "FrBT3.4",
      "paperId": "118",
      "title": "Impact of Dataset Composition on Embedded Real-Time UAV Wildfire Detection Using Compact YOLO Models",
      "session": "FrBT3",
      "date": "2026-10-30",
      "start": "16:25",
      "end": "16:40",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525656",
          "name": "de los Santos, Eduardo",
          "affiliation": "Technological University of Uruguay"
        },
        {
          "id": "254028",
          "name": "Kelbouscas, André",
          "affiliation": "FURG"
        },
        {
          "id": "270442",
          "name": "Grando, Ricardo",
          "affiliation": "Federal University of Rio Grande"
        },
        {
          "id": "397911",
          "name": "Guterres, Bruna de Vargas",
          "affiliation": "Universidad Technologica Del Uruguay"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "The development of vision-based wildfire detection systems for unmanned aerial vehicles is constrained by the limited availability of diverse real-world training images. This paper investigates the impact of dataset composition on embedded real-time UAV wildfire detection using compact YOLO models as a controlled validation family. Four training configurations were evaluated: real non-augmented, real augmented, hybrid non-augmented, and hybrid augmented, where the hybrid sets combine real wildfire images with AI-generated samples. The objective is to determine whether synthetic data mixing and image augmentation improve practical detection performance under resource-constrained deployment conditions. Experimental results show that the best overall operating point was obtained with the real non-augmented dataset, which achieved the strongest balance between recall and mean average precision for UAV-based wildfire detection. The results show that hybridization with synthetic data did not improve the final deployment choice, while conventional augmentation also yielded lower aggregate performance under the evaluated test conditions. These findings suggest that domain alignment between training and deployment imagery is an important factor for embedded UAV wildfire detection, while the benefits of augmentation may depend on the specific operating conditions being represented.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt3_04"
    },
    {
      "id": "FrBT3.5",
      "paperId": "26",
      "title": "Self Supervised Learning from Automatically Generated Demonstrations for Visual Robotic Manipulation",
      "session": "FrBT3",
      "date": "2026-10-30",
      "start": "16:40",
      "end": "16:55",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "523868",
          "name": "Rivas, Andres",
          "affiliation": "UTEC"
        },
        {
          "id": "301329",
          "name": "Cukla, Anselmo",
          "affiliation": "Federal University of Santa Maria"
        },
        {
          "id": "107312",
          "name": "da Silva Guerra, Rodrigo",
          "affiliation": "Universidade Federal Do Rio Grande (FURG)"
        },
        {
          "id": "397911",
          "name": "Guterres, Bruna de Vargas",
          "affiliation": "Universidad Technologica Del Uruguay"
        },
        {
          "id": "270442",
          "name": "Grando, Ricardo",
          "affiliation": "Federal University of Rio Grande"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "Robotic manipulation often requires object specific programming, manual data annotation, or calibrated perception pipelines, which limits rapid deployment in practical settings. Learning from demonstration offers a more direct alternative, but collecting demonstrations can still demand human teleoperation or kinesthetic teaching. This paper presents a self supervised visual manipulation method in which a robot automatically generates demonstrations around a target pose and learns relative pose corrections directly from wrist mounted RGB images. The proposed pipeline uses ROS2 and Isaac Sim to collect labeled image-pose pairs without requiring explicit camera to robot extrinsic calibration. Separate datasets are generated for planar refinement and coarse three dimensional approach, and a convolutional network is trained to regress relative translation and rotation from single frame RGB observations. During execution, a coarse to fine controller first approaches the object using models trained with height variation and then refines the final alignment using planar data. The method is evaluated both in simulation and on a real UR5e collaborative robot equipped with a gripper and a monocular camera. In simulation, the refinement stage reduces the final planar dispersion from 9.69 mm to 5.38 mm. In real world experiments, the system performs end to end grasp attempts on three physical objects and reaches success rates of 66.6% and 63.6% for two objects without object rotation, while still maintaining partial robustness under rotated conditions. These results show that automatically generated demonstrations can support practical visual manipulation with limited setup effort, while also exposing remaining challenges in depth prediction and object dependent generalization.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt3_05"
    },
    {
      "id": "FrBT3.6",
      "paperId": "439",
      "title": "Lightweight Multi-Scale Knowledge Distillation for 3D Object Detection in Service Robotics",
      "session": "FrBT3",
      "date": "2026-10-30",
      "start": "16:55",
      "end": "17:10",
      "room": "Azalea, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "468566",
          "name": "Park, Jongkuk",
          "affiliation": "LG Electronics"
        },
        {
          "id": "187382",
          "name": "Lee, Jaemin",
          "affiliation": "LG Electronics"
        },
        {
          "id": "253263",
          "name": "Lee, Byunghoon",
          "affiliation": "LG Electronics"
        },
        {
          "id": "151640",
          "name": "Noh, DongKi",
          "affiliation": "LG Electronics Inc"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Embedded service robots must perform 3D perception in real time under strict memory and compute budgets. A common way to reduce latency is to downsample the input point cloud, but naive downsampling can remove geometric details that are important for indoor object detection. We propose PoinTeacher, a resource-aware knowledge distillation framework for accelerating PointNet++/VoteNet-style 3D detectors. A multi-resolution teacher equipped with an inputdependent Multi-Scale Feature Fusion (MSFF) module transfers coordinate-aligned features and proposal-level responses to a low-resolution student. During final fine-tuning, a separate teacher with the same architecture as the student is updated by exponential moving average (EMA) and supplies a temporally smoothed consistency target. The EMA teacher is used only during training, so the deployed student incurs no additional branch. On SUN RGB-D, the 5,000-point student reaches 60.1±0.26 mAP@25 and 34.5±0.30 mAP@50 over three seeds while processing 38.1 scenes/s on an NVIDIA Jetson AGX Orin, compared with 15.8 scenes/s for the 20,000-point VoteNet baseline. These results support a practical 2.4× throughput improvement with comparable detection accuracy.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt3_06"
    },
    {
      "id": "FrBT4.1",
      "paperId": "470",
      "title": "Robust Position Tracking Control of Robotic Manipulators Using Deep Koopman-Based Equivalent Input Disturbance Estimation",
      "session": "FrBT4",
      "date": "2026-10-30",
      "start": "15:40",
      "end": "15:55",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "465883",
          "name": "Nam, Kyung Ho",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "385232",
          "name": "Ban, Jaepil",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "528412",
          "name": "Koo, Gyogwon",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a Koopman-based robust trajectory tracking control of a robotic manipulator. Specifically, a deep Koopman model is identified to approximate the nonlinear robot dynamics as a linear system in a latent observable space. Since the finite-dimensional Koopman model inevitably contains approximation errors and model mismatch, the discrepancy between the trained deep Koopman model and the actual robot dynamics exists. We consider the model mismatch as an equivalent input disturbance (EID), and an extended state observer is then designed by augmenting the Koopman state with the EID. The estimated EID is used to compensate for model mismatch, integrated with a linear quadratic (LQ) optimal state feedback control. The simulation results demonstrate that the proposed observer improves tracking accuracy compared with the conventional Koopman-LQ optimal controller and effectively compensates for both internal model mismatch and external end-effector force disturbances.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt4_01"
    },
    {
      "id": "FrBT4.2",
      "paperId": "73",
      "title": "Sensorless Load Position Estimation and Balancing Method Based on Proprioception for Ball-On-Plate Bipedal Robot Systems",
      "session": "FrBT4",
      "date": "2026-10-30",
      "start": "15:55",
      "end": "16:10",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524039",
          "name": "Ye, Chengzheng",
          "affiliation": "Zhejiang University"
        },
        {
          "id": "525272",
          "name": "Qian, Tianwei",
          "affiliation": "Guilin University of Electronic Technology"
        },
        {
          "id": "524032",
          "name": "Dong, Fanrong",
          "affiliation": "Zhejiang University"
        },
        {
          "id": "326502",
          "name": "Liu, Shaoxun",
          "affiliation": "Zhejiang University"
        },
        {
          "id": "525270",
          "name": "Jing, Hui",
          "affiliation": "Guilin University of Electronic Technology"
        },
        {
          "id": "445172",
          "name": "Wang, Rongrong",
          "affiliation": "Zhejiang University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper presents a sensorless framework for dynamic load observation and stabilization on bipedal robot system. The proposed framework reconstructs load-related states directly from onboard joint and inertial measurements, eliminating the need for external vision systems or force sensors. A cascaded observer combining a nonlinear disturbance observer and a tracking differentiator is developed to achieve real-time proprioceptive reconstruction of load contact states, position, and velocity. Based on the reconstructed load states, a hybrid control architecture is further designed, where an impedance-based module provides compliant impact buffering and a backstepping sliding mode controller (B-SMC) enables load regulation through posture-based adjustment. The framework is evaluated using a highly dynamic free-moving spherical payload as a representative for unstable loads. Simulation results show that the proposed method achieves reliable contact perception, smooth load-state reconstruction, and stable sensorless balancing under impact disturbances. For a 2kg payload dropped from 2m height, contact is detected within 1ms after impact, and the reconstructed load state converges within 0.05s, validating the effectiveness of the proposed framework.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt4_02"
    },
    {
      "id": "FrBT4.3",
      "paperId": "550",
      "title": "Multi-Manipulator Coordination for Compressor Manufacturing with Welding State Feedback",
      "session": "FrBT4",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "16:25",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528664",
          "name": "P S, Viamrsh",
          "affiliation": "SASTRA Deemed University"
        },
        {
          "id": "528670",
          "name": "S, Shanjay Sundhar",
          "affiliation": "SASTRA Deemed University"
        },
        {
          "id": "528673",
          "name": "Krishank, Sri Kamal",
          "affiliation": "SASTRA Deemed University"
        },
        {
          "id": "192973",
          "name": "Chakraborty, Arindam",
          "affiliation": "Indian Institute of Technology Kanpur"
        },
        {
          "id": "528666",
          "name": "Kumar, Abhishek",
          "affiliation": "Kirloskar Pneumatic Company Limited"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Industrial Applications of Control",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a multi-robot coordination framework for compressor welding that integrates task allocation, motion planning, and welding-state feedback to improve accuracy, throughput, and process stability. The proposed system uses multiple industrial robots positioned around a rotating compressor workpiece, where each robot is assigned a welding segment based on geometry, reachability, and collision-free workspace constraints. A central coordination layer synchronizes robot motion with turntable rotation, ensuring that the end-effectors maintain proper torch angle, standoff distance, and weld path continuity throughout the process. Welding-state feedback is incorporated through real-time sensing and fusion of arc current, torch position, orientation, and vibration, joint alignment, and seam-tracking signals, enabling adaptive correction during welding. When deviations such as misalignment, gap variation, or arc instability are detected, the controller updates robot trajectories and process parameters to maintain bead quality. The framework also includes safety monitoring, redundancy resolution, and shared workspace management to prevent robot-to-robot interference and protect equipment. Simulation results indicate that welding state feedback-driven coordination reduces path error, improves weld consistency, and shortens cycle time compared with open-loop operation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt4_03"
    },
    {
      "id": "FrBT4.4",
      "paperId": "130",
      "title": "DART: Action-Rate-Regularized DAgger Distillation for Recovery-Aware Locomotion of Bipedal Wheeled Robots",
      "session": "FrBT4",
      "date": "2026-10-30",
      "start": "16:25",
      "end": "16:40",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524032",
          "name": "Dong, Fanrong",
          "affiliation": "Zhejiang University"
        },
        {
          "id": "327191",
          "name": "Zhou, Shiyu",
          "affiliation": "Shanghai Jiao Tong University"
        },
        {
          "id": "525272",
          "name": "Qian, Tianwei",
          "affiliation": "Guilin University of Electronic Technology"
        },
        {
          "id": "524039",
          "name": "Ye, Chengzheng",
          "affiliation": "Zhejiang University"
        },
        {
          "id": "525621",
          "name": "Liu, Zhengsheng",
          "affiliation": "Zhejiang University"
        },
        {
          "id": "326502",
          "name": "Liu, Shaoxun",
          "affiliation": "Zhejiang University"
        },
        {
          "id": "445172",
          "name": "Wang, Rongrong",
          "affiliation": "Zhejiang University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Bipedal wheeled robots combine efficient locomotion with arbitrary-pose self-recovery, but these skills induce conflicting action distributions and discontinuities in multi-controller systems. This paper presents DART (DAgger-based Action-Rate-Regularized Distillation), a framework that integrates locomotion and recovery into a single proprioceptive policy with action rate regularization. Separate experts are trained for rough-terrain locomotion and recovery, and their labels are aggregated through student-induced DAgger rollouts. The student is optimized with behavioral cloning and an action rate loss that regularizes consecutive predictions near recovery-to-locomotion transitions. In a flat-ground transition evaluation, DART reduced action-change peak, action-change RMS, and torque-rate peak by 4.83%, 2.73%, and 6.22% relative to finite-state expert switching, and improved over DAgger without action rate loss. MuJoCo validation and TRON 1W deployment show that the same student policy executes recovery-aware locomotion without expert querying or runtime switching.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt4_04"
    },
    {
      "id": "FrBT4.5",
      "paperId": "519",
      "title": "Toward Terrain-Aware Latent Representations for Proprioceptive Quadrupedal Locomotion",
      "session": "FrBT4",
      "date": "2026-10-30",
      "start": "16:40",
      "end": "16:55",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "465348",
          "name": "Kim, Taemin",
          "affiliation": "Kookmin University"
        },
        {
          "id": "109773",
          "name": "Cho, Baek-Kyu",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Robust blind quadrupedal locomotion requires an implicit representation of hidden environment properties, but reconstruction-oriented latents are not guaranteed to be organized by terrain type. This paper investigates whether a DreamWaQ-style latent can be encouraged to become terrain-aware without adding a separate perception module. We compare a baseline implicit latent, full-latent terrain-conditioned prior regularization, and terrain–residual latent separation. We further conduct a matched component ablation to examine the effects of the terrain-conditioned prior, classification loss, property prediction, and latent split on both representation learning and locomotion behavior. Across the evaluated settings, terrain-aware objectives alter the latent distribution but do not consistently produce clear terrain-wise clustering or improved locomotion performance. These results suggest that explicitly enforcing semantic terrain separation may not be suﬀicient to obtain a terrain-discriminative and reliably policy-useful representation from limited proprioceptive information.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt4_05"
    },
    {
      "id": "FrBT4.6",
      "paperId": "38",
      "title": "Design and Predictive Extension Control of Extendable Robotic Arms with Time-To-Alignment Prediction",
      "session": "FrBT4",
      "date": "2026-10-30",
      "start": "16:55",
      "end": "17:10",
      "room": "Lilac, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "464951",
          "name": "Kwon, Daehyun",
          "affiliation": "DGIST"
        },
        {
          "id": "524303",
          "name": "Song, Yujin",
          "affiliation": "DGIST"
        },
        {
          "id": "353715",
          "name": "Park, Junhyun",
          "affiliation": "DGIST"
        },
        {
          "id": "145094",
          "name": "Hwang, Minho",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": "Wearable robotic systems and supernumerary robotic limbs have been actively studied to augment human motor capability and support assistive manipulation tasks. However, relatively limited research has addressed how to extend the user’s reachable workspace while maintaining a low mechanical burden and natural interaction. This paper presents an extendable robotic arm system designed as a supernumerary assistive limb for human users. The proposed system adopts a scissor-based extension mechanism with a cable-driven structure that relocates heavy actuation components toward the rear of the arm, thereby reducing the user-side gravitational torque predicted by the analytical model. In addition, we introduce a perception-driven extension strategy using a forearm-mounted depth camera. By analyzing temporal changes in the target position in image space, the system predicts the remaining time until the user’s arm and the target become aligned, and initiates arm extension before full alignment is reached. Experimental results show that the proposed method reduces task completion time by 23.1% compared to a conventional alignment-based approach, with grasp success rates of 78% (39/50) and 84% (42/50) for the proposed and conventional methods, respectively. These results demonstrate the feasibility of combining a rear-mounted actuation design for reducing predicted user-side torque with vision-based time-to-alignment prediction for efficient human-assistive robotic interaction.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt4_06"
    },
    {
      "id": "FrBT5.1",
      "paperId": "281",
      "title": "Real-Time Gait Phase Estimation and Ground Reaction Force Prediction Via Knowledge-Distilled Temporal Convolutional Network for Lower-Limb Exoskeleton Control",
      "session": "FrBT5",
      "date": "2026-10-30",
      "start": "15:40",
      "end": "15:55",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "343584",
          "name": "Moon, Sunwoong",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "196856",
          "name": "Hur, Pilwon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Exoskeleton Robot",
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Accurate estimation of gait biomechanical variables from limited wearable sensors is essential for adaptive lower-limb exoskeleton control. Simultaneous estimation of continuous gait phase variable and discrete gait events is critical because the stance-to-swing transition timing varies across individuals and even within the same person, and detecting such events typically requires additional contact sensors that compromise wearability. This paper presents a two-stage framework that estimates bilateral ground reaction forces and continuous gait phase using only sagittal-plane joint angles. A non-causal Diffusion-Transformer teacher reconstructs missing states via conditional diffusion inpainting with a bidirectional gated recurrent unit refinement head. A causal knowledge-distilled temporal convolutional network student then reproduces the teacher outputs in a streaming, frame-by-frame manner with 8-bit quantization-aware training. Gait events are detected by applying a force threshold to the estimated vertical ground reaction force, eliminating the need for contact sensors. Evaluated on the Camargo treadmill dataset with five unseen subjects across 35 trials at 0.5--1.85~m/s, the student model achieves a phase RMSE of 2.05%, ground reaction force RMSE of 0.421~N/kg, and gait event MAE of 9--24~ms at 275~Hz on a single CPU thread. The model is further fine-tuned and validated on a custom lower-limb exoskeleton during overground walking at normal and slow speeds, achieving phase RMSE of 3.96--4.87% and heel-strike detection MAE of 34--52~ms, demonstrating real-time feasibility on an embedded platform (median onboard latency of 3.274~ms).",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt5_01"
    },
    {
      "id": "FrBT5.2",
      "paperId": "373",
      "title": "Design and Development of a Sensorized Tendon-Driven Robotic Glove for Grasp Assistance in Stroke Rehabilitation",
      "session": "FrBT5",
      "date": "2026-10-30",
      "start": "15:55",
      "end": "16:10",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527367",
          "name": "Sibtain, Muhammad",
          "affiliation": "Southeast University, China"
        },
        {
          "id": "466874",
          "name": "Liang, Han",
          "affiliation": "Southeast University"
        },
        {
          "id": "527968",
          "name": "Danaish, Mr",
          "affiliation": "Southeast University, China"
        },
        {
          "id": "451160",
          "name": "Al-shameri, Mohammed Ail Abdurahman",
          "affiliation": "Southeast University"
        },
        {
          "id": "527347",
          "name": "Qasem, Arfan Ali Mohammed",
          "affiliation": "Southeast University"
        },
        {
          "id": "457276",
          "name": "Baig, Mohammad Abbas",
          "affiliation": "Southeast University, China"
        },
        {
          "id": "527357",
          "name": "Shaybo, Ahmed Sharif",
          "affiliation": "Southeast University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Rehabilitation Robot",
        "Exoskeleton Robot"
      ],
      "abstract": "Stroke often affects hand motor function, impacting the patient’s ability to grasp, hold and release objects, among other activities of daily living (ADLs). Robotic hand exoskeletons and assistive gloves have been identified as potential rehabilitation tools that can provide repetitive, controlled and task-oriented movement training. The design and development of a wearable robotic rehabilitation glove is presented in this paper, for grasping rehabilitation with real-time feedback. The feasibility of the proposed glove’s tendon-driven actuation mechanism for supporting finger motion and lightweight and wearable design is explored. The system includes a multimodal sensing approach with ten sensors, six of which are located on the palm side to measure forces exerted by the fingertips, and four flex sensors on the dorsal side to measure fingers bending and motion. This sensor setup allows for the continuous monitoring of hand posture, grasping performance and user interaction with objects during ADLs. The portable and sensorized assistive glove can provide a maximum assisted grasping force of 27 N to users. The designed glove aims at increasing the effectiveness of the rehabilitation by using assistive actuation and quantitative sensing for performance assessment and feedback.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt5_02"
    },
    {
      "id": "FrBT5.3",
      "paperId": "3",
      "title": "Anticipatory Textile-Based Tactile Sensing: Unified Pre-Contact and Contact Response for Embodied Robotic Manipulation",
      "session": "FrBT5",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "16:25",
      "room": "Crown, 3F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "507689",
          "name": "Shim, Edward",
          "affiliation": "Brighter Signals"
        },
        {
          "id": "507691",
          "name": "Stellingwerff, Ludo",
          "affiliation": "Brighter Signals"
        },
        {
          "id": "507693",
          "name": "Klein, Andrew",
          "affiliation": "Brighter Signals"
        },
        {
          "id": "486315",
          "name": "Fraser, Christine",
          "affiliation": "Brighter Signals B.V"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Industrial Applications of Control",
        "Exoskeleton Robot"
      ],
      "abstract": "Humans use pre-contact cues together with tactile feedback to anticipate and adapt to physical interaction, whereas many robotic tactile systems primarily respond after contact. This paper presents a compliant textile sensing architecture integrating projected capacitive proximity sensing with distributed resistive contact sensing within a single sensing apparatus. Controlled testing demonstrated a distance-dependent capacitive response from 150 mm through direct contact, with signal separation increasing as the target approached the sensing surface. Resistive characterization demonstrated graded response under applied masses up to 12 kg, while testing the same physical specimen before and after approximately 90° folding produced a folded-to-flat mean-response ratio of 105.3%, indicating preservation of sensing functionality under geometric deformation. Controlled climate-chamber testing additionally identified systematic temperature dependence of the capacitive response. Dense temporal sampling was used to characterize within-condition signal stability and separation rather than as independent experimental replication. Qualitative robotic integration with rigid, compliant, and fragile objects further demonstrates the applicability of the architecture to embodied sensing surfaces. The results support a unified textile interface capable of extending robotic perception from pre-contact approach into physical contact while retaining mechanical conformability.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt5_03"
    },
    {
      "id": "FrBT6.1",
      "paperId": "147",
      "title": "L1 Adaptive-Augmented Computed Torque Control with Constrained APO-Based Gain Tuning for the UR10e Collaborative Manipulator",
      "session": "FrBT6",
      "date": "2026-10-30",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "525831",
          "name": "Noaman, Mohanad",
          "affiliation": "School of Electrical and Electronic Engineering, University of Sheffield, Sheffield, S10 2TN, United Kingdom"
        },
        {
          "id": "395315",
          "name": "Mahfouf, Mahdi",
          "affiliation": "University of Sheffield"
        },
        {
          "id": "179872",
          "name": "Aitken, Jonathan Maxwell",
          "affiliation": "University of Sheffield"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "Collaborative robots such as the UR10e are central to Industry 5.0, where manipulators must operate safely alongside humans while maintaining accurate tracking and bounded transients in the presence of uncertainty and external disturbances. Fixed-gain controllers can degrade under model mismatch, whereas conventional adaptive methods may suffer from slow adaptation, high-gain sensitivity, and transient growth. This paper presents a new integrated framework, combining Computed Torque Control (CTC), L₁ adaptive augmentation, and constrained APO-based offline gain optimisation. The established CTC layer provides nominal inverse-dynamics compensation, while the L₁ layer estimates matched uncertainties using a state predictor, projection-based adaptation, and a low-pass filter that decouples estimation from robustness shaping. The CTC gains are optimised offline using a constrained modified Artificial Protozoa Optimiser (APO), parameterised through interpretable natural-frequency (fₙ) and damping-ratio (ζ) specifications with tracking-error and actuator-torque constraints. The contribution lies in coordinating these established elements for robust adaptive control of a coupled 6-DoF manipulator. Validation uses a UR10e Simscape model following a helical trajectory under nominal and combined-disturbance scenarios. APO reduces the maximum Cartesian error from 39.2 mm to 4.52 mm. Under combined payload variation, impulse contact, and viscous friction, CTC-L₁ achieves an RMS Cartesian error of 1.72 mm, improving over CTC and CTC-IMRAC by 93.2% and 86.0%, respectively, while keeping joint torques within actuator limits.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt6_01"
    },
    {
      "id": "FrBT6.2",
      "paperId": "545",
      "title": "A Decentralized Dual-Processor Architecture for Autonomous Hazardous Inspection Rovers Using ROS 2 and Edge AI",
      "session": "FrBT6",
      "date": "2026-10-30",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "528676",
          "name": "Muthukumar, Srihariharan",
          "affiliation": "PES University"
        },
        {
          "id": "528679",
          "name": "Kesavraj, Prasanna",
          "affiliation": "PES University"
        },
        {
          "id": "528682",
          "name": "Chandrashekhar, Chandrashekhar",
          "affiliation": "PES University"
        },
        {
          "id": "528678",
          "name": "M, Ananda",
          "affiliation": "PES University"
        },
        {
          "id": "528677",
          "name": "Awati, Mahesh",
          "affiliation": "PES University"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Autonomous robotic inspection systems are increasingly being adopted in Industry 4.0 environments to reduce human exposure to hazardous conditions such as toxic gases, elevated temperatures, confined spaces, and industrial accidents. However, modern inspection robots face a fundamental systems-engineering challenge: computationally intensive perception algorithms require Linux-based computing platforms that exhibit non-deterministic scheduling behavior, while safe navigation requires deterministic real-time control. This conflict is referred to in this work as the latency paradox. This paper presents an Autonomous Multi-Modal Rover (AMR) implementing a decentralized dual-processor control hierarchy that separates perception and control into independent computational domains. A Raspberry Pi 5 running ROS 2 Jazzy Jalisco performs high-level perception, navigation, hazard detection, and multi-modal sensor fusion, while an ESP32 microcontroller operating under FreeRTOS executes deterministic motor control and safety-critical sensing. Experimental evaluation demonstrates a worst-case control latency of approximately 10 ms independent of AI workload. The vision subsystem achieves a precision of 0.932 with an average inference latency of approximately 470 ms using YOLOv8n. The proposed architecture provides a scalable and cost-effective framework for hazardous industrial inspection while preserving deterministic control performance in the presence of computationally intensive edge-AI workloads.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt6_02"
    },
    {
      "id": "FrBT6.3",
      "paperId": "313",
      "title": "Robust Contact Torque Estimation of a Ledge-Climbing Robot Using Adaptive STA Momentum Observer with RBFNN Compensation",
      "session": "FrBT6",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "526947",
          "name": "Pangestu, Reno",
          "affiliation": "National Taiwan University of Science and Technology"
        },
        {
          "id": "138977",
          "name": "Lin, Chi-Ying",
          "affiliation": "National Taiwan University of Science and Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing",
        "Control Theory and Applications"
      ],
      "abstract": "Precise external torque estimation is essential for contact-based robot navigation, particularly when contact force is utilized to determine appropriate motion during wall-ledge climbing using admittance control. External torque estimation using momentum-observer methods does not require direct force sensing, but torque-sensor noise/disturbance and dynamic model uncertainty still affect their accuracy. In this study, the main challenge is not just high-frequency noise but also mid-frequency disturbances. A high level of filtering may minimize this disturbance but delays the impact response time, whereas low filtering preserves response speed but results in large estimation errors. To address this trade-off, we propose an adaptive momentum observer that integrates generalized momentum observation, a super-twisting algorithm (STA), a radial basis function neural network (RBFNN), impact-adaptive gain control, and unscented Kalman filtering. The RBFNNpredicts unmodeled disturbance online, while the adaptive gain can be controlled to increase rapidly after impact or release before decaying to prevent noise amplification. The simulation results indicate that the proposed method outperforms several conventional filtering methods in eliminating disturbances and smoothing the output signal, achieving a 26% reduction in estimation error compared to unfiltered SOMO, while only increasing the average contact latency by 0.052 seconds. An experiment validation using the proposed method confirms a smoother, more accurate, and faster response of estimation results compared with the previous method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt6_03"
    },
    {
      "id": "FrBT6.4",
      "paperId": "41",
      "title": "Laying the Foundations for Bioinspired Active Acoustic Sensing in Gas Leak Localization",
      "session": "FrBT6",
      "date": "2026-10-30",
      "start": "16:25",
      "end": "16:40",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "314899",
          "name": "Dehghan Niri, Ehsan",
          "affiliation": "Arizona State University"
        },
        {
          "id": "524325",
          "name": "Mohammad, Nasr",
          "affiliation": "Arizona State University"
        },
        {
          "id": "524362",
          "name": "Nemati, Hamidreza",
          "affiliation": "Arizona State University"
        },
        {
          "id": "321157",
          "name": "Masurkar, Nihar",
          "affiliation": "Arizona State University"
        },
        {
          "id": "120621",
          "name": "Haghshenas-Jaryani, Mahdi",
          "affiliation": "New Mexico State University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "Gas leaks in pressurized systems are known to emit high-frequency acoustic signals, typically ranging from 10 kHz to 100 kHz, with a significant concentration of energy in the ultrasound domain (20–40 kHz). Interestingly, several biological systems—such as cats and dogs—have evolved to detect ultrasonic frequencies within this range, making their auditory morphology a compelling model for bioinspired design. This paper presents a bioinspired framework for gas leakage localization, leveraging cat head-related transfer function (HRTF) modeling to inform head-positioning strategies in a motion-oriented, binaural sensing system for active acoustic detection and localization. In the first stage, a behavioral study of domestic cats provided insights into characteristic head movements in response to acoustic cues. In the second stage, simulations were performed to investigate the underlying causes of these motions. Results suggest that increased signal-to-noise ratio (SNR) in the HRTFs can serve as a control objective for formulating head-motion control laws. Finally, we present initial steps toward a novel bioinspired HRTF-based control algorithm that integrates pressure-field directly into the control law.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt6_04"
    },
    {
      "id": "FrBT6.5",
      "paperId": "673",
      "title": "Distributed Task-Space Estimation under Time-Varying Communication Delays: Stability Analysis and Explicit Error Bounds",
      "session": "FrBT6",
      "date": "2026-10-30",
      "start": "16:40",
      "end": "16:55",
      "room": "Symphony A, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "338481",
          "name": "Yeh, Hua-Hsuan",
          "affiliation": "National Cheng Kung University"
        },
        {
          "id": "133913",
          "name": "Liu, Yen-Chen",
          "affiliation": "National Cheng Kung University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Robotic Applications"
      ],
      "abstract": "In this study, a distributed task-space estimation is investigated for heterogeneous agents communicating over a network subject to time-varying delays. Using only delayed information received from neighboring agents, each agent estimates the task-space positions of all other agents. The estimation errors are uniformly ultimately bounded, with explicit ultimate bounds characterized by the target velocities, communication-delay bounds, and network topology. When the target velocity converges to zero, both the estimation errors and observer velocities asymptotically converge to zero. Simulation results verify the predicted delay- and topology-dependent behavior.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt6_05"
    },
    {
      "id": "FrBT9.1",
      "paperId": "94",
      "title": "Leveraging Planar Regularity for Gaussian Splatting SLAM",
      "session": "FrBT9",
      "date": "2026-10-30",
      "start": "15:40",
      "end": "15:55",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "319659",
          "name": "Seo, Dong-Uk",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "442732",
          "name": "Park, Jiwon",
          "affiliation": "KAIST"
        },
        {
          "id": "408934",
          "name": "Kong, Jei",
          "affiliation": "KAIST"
        },
        {
          "id": "286263",
          "name": "Jeon, Jinwoo",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Feature-based visual SLAM has been incorporated into Gaussian splatting SLAM pipelines, providing camera poses, keyframes, and sparse point landmarks for Gaussian map initialization or optimization. However, the geometric information transferred from the SLAM to the Gaussian map is still largely limited to point-level structure, while other structural regularities available in man-made environments remain underexplored. In this paper, we propose a plane-regularized Gaussian splatting SLAM framework that exploits planar regularity from a feature-based visual SLAM frontend to improve the geometric quality of Gaussian maps. Our method builds the Gaussian mapping backend with 2D Gaussian splatting, representing the scene with surface-aligned Gaussian primitives that provide an interface for planar regularization. We employ a feature-based plane tracking module to recover planar structures from sparse SLAM landmarks, and incorporate the resulting planar cues into Gaussian map optimization. The resulting planar cues provide a structural bridge between the sparse SLAM map and the dense Gaussian representation by guiding initialization, supervising planar image regions, and regularizing Gaussian primitive positions and normals. Experimental results demonstrate that the proposed method improves reconstruction accuracy while preserving photometric rendering quality and maintaining real-time performance.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt9_01"
    },
    {
      "id": "FrBT9.2",
      "paperId": "95",
      "title": "Study on Alleviating Data Acquisition Constraints in In-Cabin Monitoring Using Synthetic-To-Real Generalization",
      "session": "FrBT9",
      "date": "2026-10-30",
      "start": "15:55",
      "end": "16:10",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "524094",
          "name": "Kim, Suk Hyun",
          "affiliation": "Mobase Electronics"
        },
        {
          "id": "525495",
          "name": "Kim, In Ji",
          "affiliation": "Mobase Electronics"
        },
        {
          "id": "524157",
          "name": "Park, Sam Min",
          "affiliation": "Mobase Electronics"
        },
        {
          "id": "524158",
          "name": "Choi, Jun Sam",
          "affiliation": "Mobase Electronics"
        }
      ],
      "keywords": [
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "The In-Cabin Monitoring System (ICMS) is a key vehicular safety system designed to detect the states and behaviors of drivers and passengers. However, real-world image-based data collection is time-consuming, costly, and inherently limited in capturing sufficiently diverse and complex scenarios. To address this issue, this paper proposes a data training framework based on a synthetic-to-real generalization strategy. The proposed framework generates synthetic images through a diffusion model by jointly incorporating semantic information extracted from a Visual Semantic Encoder, appearance information encoded by a Variational Autoencoder (VAE), and conditioning information derived from text prompts. Experimental results show that the model trained with a mixed dataset of real and synthetic images achieved detection performance close to that of real-only training on real vehicle images. These findings suggest that the proposed framework can serve as a practical complementary approach for mitigating the limitations of real-world data collection in vehicle environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt9_02"
    },
    {
      "id": "FrBT9.3",
      "paperId": "364",
      "title": "Temporal Model Smoothing for Sample-Limited Local Learning MPC",
      "session": "FrBT9",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "16:25",
      "room": "Symphony D, 4F",
      "type": "Oral Session",
      "authors": [
        {
          "id": "527872",
          "name": "Pranayanuntana, Pawornrat",
          "affiliation": "Department of Control Systems and Instrumentation Engineering, KMUTT"
        },
        {
          "id": "121610",
          "name": "Panomruttanarug, Benjamas",
          "affiliation": "King Mongkut's University of Technology Thonburi"
        },
        {
          "id": "112830",
          "name": "Boonto, Sudchai",
          "affiliation": "KMUTT"
        }
      ],
      "keywords": [
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control",
        "Control Theory and Applications"
      ],
      "abstract": "This paper studies temporal inconsistency in local regression-based Learning Model Predictive Control (Local LMPC) under sample-limited model identification. Using a large local regression neighborhood can reduce model variation, but may increase data processing and make the learned model less local. Conversely, using fewer samples makes the identified affine model more sensitive to neighbor-set switching and regression conditioning. To diagnose this effect, we use the model-variation metric Δmodel and the normalized neighbor-switching score sneigh. We then apply a fixed smoothing-parameter exponential update to the locally identified model matrices before they enter the MPC quadratic program, without changing the horizon, constraints, local regression rule, or QP dimensions. Closed-loop nonlinear kinematic-bicycle simulations on an L-shaped track show a consistency–responsiveness trade-off: large α gives faster but more chattering behavior, whereas small α reduces model and steering variation at the cost of slower response.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frbt9_03"
    },
    {
      "id": "FrPo6P.1",
      "paperId": "575",
      "title": "A Feasibility Study on In-Fingertip Null-Space Control for Vial Cap Engagement and Screwing",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528274",
          "name": "Heo, Jeong",
          "affiliation": "Hanyang University"
        },
        {
          "id": "140339",
          "name": "Seo, TaeWon",
          "affiliation": "Hanyang University"
        },
        {
          "id": "181916",
          "name": "Hwang, Donghyun",
          "affiliation": "Korea Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control"
      ],
      "abstract": "Robotic automation in laboratory environments can involve object handling in confined workspaces, where surrounding structures restrict large wrist rotations and arm motions. This paper presents the feasibility of the alignment and insertion preceding vial cap engagement and screwing by formulating the problem as an object-handling task and solving it with a task-priority based control framework that performs manipulation through finger-level motion of a dexterous hand, without relying on arm-centric movement. Grasp geometry that is represented by the three pairwise fingertip distances is maintained as the primary task while object translation and rotation are generated within its null-space as the secondary task. The object proxy pose is estimated from fingertip positions via forward kinematics, without any external pose sensor. The framework was validated on hardware with the arm wrist held fixed, so that all object motion was produced by finger-level manipulation. In single-axis experiments, we measured a sub-millimeter primary grasp deviation of 0.59 mm on average, and in task-level demonstration the robotic hand aligned and inserted the object while preserving the grasp geometry. These results support the feasibility of finger-level in-hand manipulation for object handling in workspace-constrained laboratory settings.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_01"
    },
    {
      "id": "FrPo6P.2",
      "paperId": "582",
      "title": "Optimal Path Search for Robot-Arm-Based Magnetic Control of a Wireless Soil Sampler",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528752",
          "name": "Kang, SeonKyu",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "133064",
          "name": "Kim, Jayoung",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Control Devices and Instruments"
      ],
      "abstract": "This study proposes a method for determining optimal positions and orientations of a robotic end-effector used in curved-path drilling of a wireless soil sampler. The system consists of an actuation magnet attached to the robotic end-effector and a permanent magnet embedded in the soil sampler. By controlling the end-effector pose, magnetic force and torque are generated to wirelessly propel and steer the sampler during drilling. Unlike conventional Edelman-auger-type soil samplers that are limited to straight-line penetration, the proposed method enables curved drilling trajectories for obstacle avoidance in underground environments. The drilling path is discretized into a sequence of steps along a refer-ence trajectory connecting the start and goal points. At each step, candidate end-effector poses are evaluated based on the magnetic force and torque required to propel and steer the sampler, which are estimated using a magnetic dipole model and an agarose (0.6 wt%) gel resistance model. Robot reachability is verified through inverse kinematics. A two-stage optimization identifies feasible poses satisfying both magnetic actuation and kinematic constraints, then selects the pose that best follows the reference path while minimizing joint motion. The proposed method enables curved-path drilling planning under coupled magnetic and robotic constraints for obstacle avoidance soil sampling.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_02"
    },
    {
      "id": "FrPo6P.3",
      "paperId": "586",
      "title": "Preparation of a Digital Twin Model of Harmonic Drive Gear System Using Nonlinear Finite Element Analysis for Physical AI Applications",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528784",
          "name": "Park, Moon-Woo",
          "affiliation": "Korea Institute for Robot Industry Advancement"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "This paper presents a digital twin modeling approach for a harmonic drive reduction gear system based on nonlinear finite element analysis (FEA) for future Physical AI applications. Unlike conventional rigid-body transmission models, the proposed model explicitly represents the elastic deformation of the flexspline induced by the wave generator and the nonlinear tooth engagement between the flexspline and circular spline. A commercial harmonic drive reducer model was selected as the target system. A detailed finite element model was developed using HyperWorks/OptiStruct, including wave generator, flexspline, circular spline, and bearing assemblies. Nonlinear surface-to-surface contact formulations were employed to simulate deformation propagation and torque transmission mechanisms. Static structural analysis was performed under the average torque limit. The simulation results demonstrated realistic deformation patterns, tooth contact distributions, and stress concentrations. Maximum von-Mises stress of the flexspline was predicted as 549 MPa, remaining below the material yield strength of SCM440 steel. The developed model provides a physics-based foundation for digital twin construction and future reduced-order modeling techniques applicable to Physical AI systems. Future research will focus on integrating simulation data with machine learning frameworks to enable real-time state estimation, predictive maintenance, and intelligent motion planning of robotic systems utilizing harmonic drive reducers",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_03"
    },
    {
      "id": "FrPo6P.4",
      "paperId": "588",
      "title": "Simulation-Based Diffusion Policy Training Framework for Precision Task",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527930",
          "name": "Park, Sangyong",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "288969",
          "name": "Ko, Yeongmin",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control"
      ],
      "abstract": "Precision manipulation is essential in modern robotic applications such as assembly, cutting, and inspection. Especially in cutting, simple position error can lead to project failure or damage of valuable component. Consequently, developing reliable manipulation policies for precision is required and remains a challenge. and this kind of task requires huge amount of data generated by physical robot manipulation. But this kind of data consumes time and resources. So this paper proposes a way to train precision manipulation task via simulation. The simulation can generate 100 trajectories in 511seconds and generated datasets contains three categories Video, joints, and trajectory. Each category contains as much related information as possible so it can be used for multiple model. In this paper trained model is diffuser. Result of the test shows diffuser can be trained with data generated by simulation and able to create trajectory. but It's only been tested in simulation environment, further research is required to test how it works with actual hardware. Contribution of paper is Propose a simulation for high-precision manipulation task training, Using open sourced manipulator(SO101) shows high-precision manipulation task can be performed with simple hardware and can be used in various systems, proves model can be trained with gathered data and able to generate trajectory.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_04"
    },
    {
      "id": "FrPo6P.5",
      "paperId": "595",
      "title": "Real-Time Control of Tendon-Driven Continuum Robot Using MPPI and Residual Jacobian-Based Online Learning",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "520031",
          "name": "Lee, Dongjun",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology(DGIST)"
        },
        {
          "id": "224061",
          "name": "Kim, DongWook",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology (DGIST)"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Control Theory and Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Tendon-driven continuum robots (TDCRs) are widely used in confined operating systems due to their thin shape, flexibility. Several modeling and control methods have been used for TDCRs, such as Cosserat rod model and model predictive control (MPC). However, Cosserat rod models and MPC have limitations in real-time control and handling the nonlinear behavior of TDCRs due to computational complexity and dynamics linearization, respectively. In this paper, to address the two problems, we employ a PCC model based residual radial basis function network (RBFN). Although the PCC model is computationally efficient due to its simple approximation, it cannot fully explain modeling errors; therefore, we augment with a residual RBFN to compensate for the errors that the PCC model cannot account for. Moreover, we employ a model predictive path integral (MPPI) controller that uses a Jacobian-based PCC–residual RBFN model as the rollout model, and the residual RBFN model is updated online using buffer data. We validate the proposed method on a handmade one-segment TDCR hardware consisting of four tendons, with vision-based tracking using two webcams. The reference trajectory tracking test shows that the proposed residual RBFN method reduces the mean tracking error, RMS tracking error, and model prediction error by 47.0%, 41.6%, and approximately 50%, respectively.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_05"
    },
    {
      "id": "FrPo6P.6",
      "paperId": "596",
      "title": "RCM-Consistent Admittance Control with Inverse-Dynamics QP for Hands-On Robotic Manipulation",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528660",
          "name": "Jeong, Jaehun",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "395588",
          "name": "Park, Seongsu",
          "affiliation": "KAIST"
        },
        {
          "id": "427928",
          "name": "Lee, Sanghoon",
          "affiliation": "KAIST"
        },
        {
          "id": "149446",
          "name": "Kim, Min Jun",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Human-Robot Interaction"
      ],
      "abstract": "Robot-assisted minimally invasive surgery (RAMIS) often requires a surgical tool to pivot about a trocar while allowing direct hands-on manipulation by the surgeon. During kinesthetic guidance, however, operator-applied forces and moments act as external inputs to the robot. Their interaction with nonlinear robot dynamics and physical limits can result in remote center of motion (RCM) constraint violation or infeasible torque commands. This paper proposes an RCM-constrained control framework for hands-on manipulation that combines an RCM-consistent admittance filter with inverse-dynamics quadratic programming (QP). The admittance filter generates a joint-space reference trajectory from the measured external wrench while enforcing the RCM constraint at the position, velocity, and acceleration levels. The inverse-dynamics QP then computes torque commands that track the reference trajectory while considering the joint position, velocity, and torque limits. Baumgarte stabilization is incorporated into the acceleration-level RCM formulation to reduce errors caused by numerical drift and saturation. Simulation studies using a 6-DoF manipulator compare the proposed method with two baseline controllers under insertion-roll interaction scenarios. Overall, the results show that the proposed controller reduces both the RCM error and its time derivative while accounting for the prescribed joint torque limits in the inverse-dynamics QP.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_06"
    },
    {
      "id": "FrPo6P.7",
      "paperId": "602",
      "title": "Dual-Attachment Cable Suspension System for Zero-Gravity Emulation of Space Manipulators",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528736",
          "name": "Shin, Seungmin",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "398450",
          "name": "Kim, Jiwon",
          "affiliation": "KAIST"
        },
        {
          "id": "149446",
          "name": "Kim, Min Jun",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Control Devices and Instruments"
      ],
      "abstract": "Space manipulators are increasingly used in various on-orbit operations. Accordingly, reliable on-ground validation of such systems has become increasingly important. However, because space manipulators are designed for a microgravity environment, their actuators are not capable of supporting gravity loads, which makes on-ground testing challenging. This paper proposes a dual-attachment cable suspension system for zero-gravity emulation of a 7-DOF space manipulator. For each attachment point, the required external force for gravity compensation is computed and mapped to feasible cable tensions under pull-only and tension-limit constraints. By applying cable-generated external forces at two different links, the proposed system achieves gravity compensation for the six dominant gravitational joint torques. The approach is evaluated in simulation with the CAESAR manipulator through joint-space trajectory tracking and a pick-and-place task. The results show that the proposed system successfully compensates for gravitational torques and produces motion close to zero-gravity behavior, while maintaining feasible cable tensions throughout the task.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_07"
    },
    {
      "id": "FrPo6P.8",
      "paperId": "606",
      "title": "Learning to Utilize Passive Toe Dynamics in Bipedal Walking Via Adversarial Motion Priors",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "506230",
          "name": "Kim, Minseok",
          "affiliation": "Gwangju Institute of Science and Technology"
        },
        {
          "id": "196856",
          "name": "Hur, Pilwon",
          "affiliation": "Gwangju Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Passive toe joints can provide compliance during stance, but their unactuated motion is difficult to induce because it depends on robot dynamics and ground contact. This paper presents a motion imitation approach based on Adversarial Motion Priors (AMP) for inducing passive toe-joint motion in bipedal walking without toe torque commands or prescribed toe trajectories. Human walking motion is retargeted to a toe-jointed bipedal robot and used for policy training. The passive toe joints are excluded from the policy action space and are not assigned reference trajectories. Instead, their motion emerges through passive spring-damper dynamics, robot motion, and ground contact. To prevent passive toe motion from being penalized as an imitation mismatch, passive toe states are masked in the discriminator observation. We compare the proposed condition with a fixed-toe baseline and a no-masking ablation. Simulation results across three independently trained random seeds show clear stance-phase passive toe dorsiflexion and toe loading. The no-masking ablation produces smaller toe dorsiflexion, suggesting that discriminator masking promotes greater passive-toe utilization. These results suggest that passive toe utilization can emerge from AMP-based motion imitation without explicit toe commands or prescribed toe trajectories.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_08"
    },
    {
      "id": "FrPo6P.9",
      "paperId": "617",
      "title": "Hall-Only Wheel Friction-Change Detection: A Feasibility Study",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "319159",
          "name": "Lee, Chang-Hwan",
          "affiliation": "Gyeongkuk National Univ"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Autonomous Vehicle Systems",
        "Robotic Applications"
      ],
      "abstract": "Detecting changes in wheel–terrain interaction, such as traction loss, slip, or contact loss, is essential for the safe autonomous operation of mobile robots. Conventional approaches typically rely on additional sensors such as inertial measurement units, force/torque sensors, or high-resolution encoders, which increase cost and integration complexity. This paper presents a simulation-based feasibility study of detecting wheel friction changes using only the three-phase Hall sensors already embedded in commercial in-wheel brushless DC (BLDC) motors, without any additional sensing hardware. The proposed pipeline combines a phase-locked loop (PLL) speed estimator, which reconstructs wheel angular velocity from quantized Hall edge timings, with a generalized momentum observer (GMO) that estimates the disturbance torque acting on the wheel axis. Because the observer residual converges to the negative of the disturbance torque, a change in rolling friction appears directly as a measurable shift in the residual, enabling friction-change detection without explicit acceleration measurement. The pipeline is evaluated under open-loop constant-torque operation across five operating points, from 20% to 100% of rated torque. The residual converges to the true disturbance torque with a steady-state error below 0.4%, independently of the operating point. Three representative disturbance events—an external impulse, a partial traction loss (slip), and a complete contact loss (drop-off)—are shown to be distinguishable in the time-domain residual through their amplitude and recovery behavior. A comparison against a 1000-pulse-per-revolution encoder shows that the Hall-plus-PLL configuration matches or exceeds the encoder over 80% of the operating envelope, while requiring no additional sensors. These results indicate that Hall-only sensing is sufficient for reliable wheel friction-change detection over a wide operating range, providing a practical, deployable basis for proprioceptive terrain monitoring. Ongoing work extends the approach to four-wheel platforms with active step-torque probing for quantitative friction estimation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_09"
    },
    {
      "id": "FrPo6P.10",
      "paperId": "634",
      "title": "Force-Manipulability-Aware Whole-Body Optimization for Quadruped Manipulators",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "409208",
          "name": "Choi, Kanghyeon",
          "affiliation": "University of Seoul"
        },
        {
          "id": "100369",
          "name": "Hwang, Myun Joong",
          "affiliation": "University of Seoul"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications"
      ],
      "abstract": "Quadruped manipulators require whole-body postures that ensure both end-effector reachability and effective force transmission during contact tasks. This paper presents a posture optimization method based on directional force manipulability for pulling tasks. Given a target end-effector pose and pulling direction, the method searches over the object-relative body distance, body height, and body pitch. For each candidate, arm and leg inverse kinematics are solved, and candidates are filtered using end-effector pose accuracy and support feasibility constraints. The feasible posture with the maximum directional force manipulability is selected as the whole-body configuration. The method is evaluated in Isaac Sim using a Go1 quadruped equipped with a PiPER manipulator and randomly sampled target poses. The results show that feasible postures can be generated across diverse targets and that body placement substantially affects directional force manipulability even when the same target end-effector pose is satisfied.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_10"
    },
    {
      "id": "FrPo6P.11",
      "paperId": "647",
      "title": "Predictive versus Reconstructive Terrain Representations for Quadrupedal Locomotion under Depth Degradation",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "470470",
          "name": "Kim, Taehyeong",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "380903",
          "name": "Lee, Sangmoon",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "Terrain-aware legged locomotion increasingly depends on a single onboard depth camera, yet real depth degrades through holes, occlusion, and dropout. Reconstruction-based encoders learn a latent by reproducing a height map, forcing it to account for every observed value and tying its quality to the sensor. We ask whether predictive representations—which predict the future latent rather than reconstructing the terrain—degrade more gracefully. We present a locomotion backbone with a swappable representation head for a controlled comparison: a fixed PointNet encoder, a proprioceptive encoder that also estimates base velocity, a recurrent memory, and an implicit terrain-aware RL policy are held identical, and only the head is switched between reconstruction and a JEPA-style latent prediction. On the Unitree Go2 in Isaac Lab, both heads walk under clean depth, but as it is corrupted the reconstructive representation degrades sharply while the predictive one degrades gracefully and keeps walking—consistently across dropout, holes, and occlusion.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_11"
    },
    {
      "id": "FrPo6P.12",
      "paperId": "659",
      "title": "Analysis of the Propulsion Performance of a Coaxial Counter-Rotating UAV with Propeller Blade Numbers",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532168",
          "name": "Kang, ChanHwi",
          "affiliation": "Poongsan"
        },
        {
          "id": "532173",
          "name": "Yoo, SungJoo",
          "affiliation": "Poongsan"
        },
        {
          "id": "532174",
          "name": "Song, Yi-Hwa",
          "affiliation": "Poongsan"
        },
        {
          "id": "532176",
          "name": "Jang, JaeHun",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Coaxial counter-rotating propulsion systems provide high thrust density within a compact airframe, making them suitable for uncrewed aerial vehicles (UAVs). However, the aerodynamic interaction between the upper and lower rotors causes propulsion characteristics that differ from those observed in single-motor tests. This study investigates the effect of propeller blade number on the propulsion performance of a coaxial counter-rotating UAV. A preliminary experiment was conducted using a single motor to compare the performance of two-blade and four-blade propellers under identical operating conditions. The results showed that the two-blade propeller generated higher thrust than the four-blade propeller. To evaluate the actual flight performance, both propeller configurations were applied to a coaxial counterrotating UAV, and flight tests were performed under identical flight conditions. Flight efficiency was evaluated based on flight tests conducted from takeoff until the battery voltage decreased to 17V. Although the two-blade propeller exhibited superior thrust performance in the single-motor experiment, the four-blade propeller achieved a longer flight time during the flight test. These results indicate that single-motor performance alone is insufficient for evaluating the propulsion efficiency of coaxial counter-rotating UAVs, and that aerodynamic interactions between coaxial rotors should be considered when selecting propeller configurations.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_12"
    },
    {
      "id": "FrPo6P.13",
      "paperId": "669",
      "title": "A Fuzzy Null-Space Controller for Human-Like Elbow Configuration in Dual-Arm 7-DOF Humanoid Manipulators Based on Palm Orientation",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "288983",
          "name": "Lee, Hunjo",
          "affiliation": "Korea University of Science and Technology, Korea Institute of Industrial Technology"
        },
        {
          "id": "106009",
          "name": "Yang, Gi-Hun",
          "affiliation": "KITECH"
        }
      ],
      "keywords": [
        "Robot Mechanism and Control",
        "Robotic Applications",
        "Control Theory and Applications"
      ],
      "abstract": "For a 7-DOF anthropomorphic manipulator, the redundant degree of freedom left by the end-effector task must be resolved to obtain a human-like posture. Prior approaches rely on either a structure-specific analytic swivelangle model or a posture prior learned from human motion-capture data. This paper proposes a lightweight null-space controller that infers a preferred elbow direction directly from the real-time palm orientation using a rule-based fuzzy model, combined with manipulability maximization. Since all variables are defined purely from forward kinematics and the Jacobian, the method needs no structure-specific derivation and no training data, and is readily portable across 7-DOF arm designs. On a dual-arm UFactory xArm7 platform in MuJoCo, the elbow direction converges to the fuzzy-inferred target as the palm orientation is swept, while the end-effector position error remains negligible.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_13"
    },
    {
      "id": "FrPo6P.15",
      "paperId": "83",
      "title": "DUET-SLAM: Dual-Flow Consistency for Dense Monocular SLAM in Dynamic Environments with Geometry-Aware Foundation Model",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "286263",
          "name": "Jeon, Jinwoo",
          "affiliation": "KAIST"
        },
        {
          "id": "319659",
          "name": "Seo, Dong-Uk",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Geometry-aware foundation models have recently enabled monocular visual simultaneous localization and mapping (SLAM) to perform camera tracking and dense reconstruction without known camera intrinsics. In SLAM systems that leverage geometry-aware foundation models, estimating dense pointmap correspondences is essential for pose optimization. However, such correspondences are typically estimated under a static-scene assumption, and moving objects can corrupt dense correspondences and degrade pose estimation in dynamic environments. To tackle this problem, we propose DUET-SLAM, a training-free dense monocular SLAM framework that improves the robustness of SLAM systems based on geometry-aware foundation models in dynamic environments. Our key insight is that dense correspondences can be interpreted as an implicit optical flow. We introduce a training-free flow-consistency mechanism that compares the implicit flow with optical flow estimated using an off-the-shelf network. The resulting flow discrepancy is utilized to identify motion-inconsistent correspondences associated with dynamic objects. Experiments on the dynamic sequences of the TUM RGB-D dataset demonstrate that DUET-SLAM improves camera pose estimation accuracy compared with the baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_15"
    },
    {
      "id": "FrPo6P.16",
      "paperId": "86",
      "title": "Depth-Supervised Event Gaussian Splatting for Accurate Surface Reconstruction",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "273996",
          "name": "Kim, Yunsoo",
          "affiliation": "KAIST"
        },
        {
          "id": "525403",
          "name": "Lee, Taeji",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "Event cameras have emerged as a compelling sensing modality for novel view synthesis, offering high temporal resolution, low latency, and high dynamic range. However, existing event-based 3D Gaussian splatting methods suffer from inaccurate surface geometry, as flat surface regions with uniform appearance generate sparse or no events, leaving interior surface areas severely under-supervised. In this paper, we propose depth-supervised event Gaussian splatting (DSEGS), a framework that integrates two complementary geometric supervision signals into event-based 3D Gaussian splatting. First, for each event frame, we estimate a dense depth map using a pretrained monocular depth estimation model and align it with the rendered depth via scale-shift fitting. Second, we enforce multi-frame normal consistency by computing world-space surface normals from rendered depth maps and penalizing angular differences at depth-warped corresponding points across frames, leveraging the constraint that the same physical surface must exhibit consistent normals from any viewpoint. Experiments on the Replica dataset demonstrate that DSEGS significantly improves surface accuracy over existing event-based methods.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_16"
    },
    {
      "id": "FrPo6P.17",
      "paperId": "93",
      "title": "Reliability-Weighted Active Gaussian Reconstruction under Camera Pose Uncertainty",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "479121",
          "name": "Oh, Sangcheol",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "159267",
          "name": "Oh, Junghyun",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Active Gaussian reconstruction aims to efficiently reconstruct a scene by selecting informative viewpoints under a limited observation budget. Recent Gaussian Splatting-based active reconstruction methods guide viewpoint se- lection using the current map state, but they commonly assume reliable camera poses during map updating. In practical robotic scenarios, camera poses can contain translational and rotational errors, and observations acquired with inaccurate poses may be incorrectly accumulated into the Gaussian map. Since the updated map state is reused for subsequent view- point selection, such unreliable accumulation can distort the confidence map and degrade reconstruction performance. In this paper, we propose a reliability-weighted map update scheme for active Gaussian reconstruction under camera pose uncertainty. The proposed method keeps the viewpoint selection process of ActiveGS unchanged, while modifying how newly acquired RGB-D observations are accumulated into the Gaussian map. The input observation is first locally aligned with the current Gaussian map, and a frame-level pose reliability score is estimated from the residual depth discrepancy and geometric sensitivity. This reliability score, together with distance-dependent attenuation, adjusts the observation con- tribution of each Gaussian primitive during confidence update. Experiments on Replica indoor scenes under controlled pose-noise settings show that the proposed method consistently improves both peak signal-to-noise ratio (PSNR) and completion ratio compared with ActiveGS.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_17"
    },
    {
      "id": "FrPo6P.18",
      "paperId": "96",
      "title": "360DVIO: Deep Visual-Inertial Odometry Using a 360-Degree Camera",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "510861",
          "name": "Lee, Seunghun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        },
        {
          "id": "511163",
          "name": "Nam, Jihun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "360-degree cameras keep the whole surroundings in view even under aggressive 6-DoF motion and are therefore well suited for state estimation on unmanned aerial vehicles (UAVs) and mobile robots. In such dynamic scenarios, metric scale recovery is critical, yet the scale ambiguity inherent to monocular vision remains, and the equirectangular projection (ERP) distorts scene geometry unevenly across latitude, further complicating depth estimation from visual cues. At the same time, the full-sphere field of view is geometrically complementary to inertial measurements and supports stable gravity estimation and scale initialization in visual-inertial odometry (VIO). Existing 360-degree VIO methods rely on handcrafted features that degrade under illumination changes and low-texture conditions, while learning-based 360-degree odometry remains visual-only and unable to recover metric scale. We propose a learning-based VIO framework for a single 360-degree camera. It integrates a pre-trained recurrent network for equirectangular patch correspondence into a tightly coupled factor graph, with the reprojection residual adapted to ERP spherical geometry. Experiments on public benchmark datasets show that the proposed framework recovers metric-scale trajectories and achieves the lowest trajectory error on four of the five evaluated sequences, including low-light and aggressive-motion settings.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_18"
    },
    {
      "id": "FrPo6P.19",
      "paperId": "100",
      "title": "Geometry-Preserving Sim-To-Real Data Generation for Centroid-Stable Visual Servoing in EV Battery Disassembly",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "524193",
          "name": "Park, Seong Eun",
          "affiliation": "Hanyang University, THOTHInc"
        },
        {
          "id": "104616",
          "name": "Lee, Sang Hyoung",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "169323",
          "name": "Cho, Nam Jun",
          "affiliation": "Hanyang University"
        },
        {
          "id": "140162",
          "name": "Kwon, Taesoo",
          "affiliation": "Carnegie Mellon University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Process Control Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "End-of-life EV battery disassembly requires precise vision-guided bolt alignment under hazardous and non-standardized conditions. In Image-Based Visual Servoing (IBVS), the predicted bolt centroid directly drives robot motion; therefore, even a small centroid bias can exceed socket tolerances and cause alignment failure. However, accurately annotated centroid data are difficult to obtain because labeling requires expert knowledge and direct access to each battery pack. To address this bottleneck, we propose a geometry-preserving sim-to-real data generation method that separates bolt geometry from appearance variation. Pixel-accurate rendered geometry and ground-truth centroids are fixed first, and diffusion-based appearance variation is introduced only through constrained composition. A geometric consistency filter, ShapeCons, then removes samples with residual boundary or center-mark distortion that could shift centroid predictions. In real-robot experiments, the proposed method achieves 89.5% closed-loop IBVS alignment success at the ≤2 px criterion, yielding a 42.1 percentage-point improvement over an appearance-augmentation baseline without geometry filtering. These results show that geometric consistency in synthetic data is critical for reliable visual servoing, even when conventional detection accuracy remains high.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_19"
    },
    {
      "id": "FrPo6P.20",
      "paperId": "102",
      "title": "UToM: Uncertainty-Aware Token Merging for Efficient Semantic Segmentatio",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "462182",
          "name": "Kim, Wanhee",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "271369",
          "name": "Sung, Chang Ki",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Vision Transformer-based semantic segmentation achieves strong performance, but its quadratic self-attention cost makes high-resolution dense prediction computationally expensive for resource-constrained systems. Token merging reduces this cost by combining redundant tokens, but existing merging criteria often rely primarily on feature similarity, which may not fully capture semantic reliability in dense prediction. To address this limitation, this paper proposes UToM, an uncertainty-aware token merging method for efficient semantic segmentation. UToM predicts token-level semantic probabilities from intermediate features using a lightweight auxiliary head and derives pair-level semantic confidence for candidate token pairs. This confidence is combined with feature similarity to compute an uncertainty-aware merge score. By suppressing semantically unreliable merges and encouraging merges between tokens that confidently support the same semantic class, UToM improves the accuracy-efficiency trade-off in semantic segmentation. Experimental results show that semantic confidence provides an effective guidance signal for reliable token merging and enables improved accuracy-efficiency trade-offs in dense prediction.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_20"
    },
    {
      "id": "FrPo6P.21",
      "paperId": "141",
      "title": "VLM-Driven Characterization of Action Points in Unknown Environments for Autonomous Robots",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "357286",
          "name": "Häuselmann, Ramona",
          "affiliation": "Luleå University of Technology"
        },
        {
          "id": "340572",
          "name": "Valdes Saucedo, Mario Alberto",
          "affiliation": "Lulea University of Technology"
        },
        {
          "id": "199367",
          "name": "Kanellakis, Christoforos",
          "affiliation": "LTU"
        },
        {
          "id": "105882",
          "name": "Nikolakopoulos, George",
          "affiliation": "Luleå University of Technology"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Field robot deployments increasingly rely on scene representations that characterize actionable environment elements and their relationship to robot capabilities and tasks. This paper presents a hierarchical perception-reasoning architecture based on a VLM-driven scene representation that outputs the state and location of observed action points in the visited environment. A vision-language-based reasoning framework fuses RGB, depth, and voxelized occupancy representation into a spatial world model, extracting high-level action points with semantic context annotations. These VLM-proposed scene highlights are stored in a candidate database and actively refined using a best-view selection module that selects viewpoints to improve observation quality. A task-level reasoning module then operates over the action point representation to annotate them with additional information such as semantic properties relevant to robot missions. Real-world experiments in indoor environments demonstrate robust operation, improved viewpoint selection, and scene understanding for autonomous field robots.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_21"
    },
    {
      "id": "FrPo6P.22",
      "paperId": "154",
      "title": "Chunk-Based Diffusion VLA with State-Free Inference for Dual-Arm Humanoid Robot Simulation",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "414382",
          "name": "Sanaullah, Sanaullah",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "525769",
          "name": "Kumar, Abhishek",
          "affiliation": "Korea Institute of Machinery and Material"
        },
        {
          "id": "227322",
          "name": "Abbasi, Saad Jamshed",
          "affiliation": "Pusan National University"
        },
        {
          "id": "525761",
          "name": "Kim, Jeong Yong",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "124478",
          "name": "Han, Byung-Kil",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "185961",
          "name": "Park, Dongil",
          "affiliation": "Korea Institute of Machinery and Materials (KIMM)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "We evaluate StarVLA — a Qwen2.5-VL-3B vision-language backbone with a flow-matching diffusion action head — on the Robotis SG2 AI Worker in NVIDIA IsaacLab, comparing two separately fine-tuned variants: a state conditioned variant, trained and evaluated with proprioceptive joint state as an additional input, and a state-free variant, trained and evaluated on image-language pairs only, across 50 fully randomized trials per variant on a single manipulation task. The state-free variant achieves 66% task success versus 28% for the state-conditioned variant (z = 3.81, p < 0.001, two-proportion test), which we hypothesize is related to the added learning burden of jointly modeling proprioceptive state alongside vision and language during fine-tuning, though we do not establish this mechanism causally. Both models overfit beyond their optimal checkpoints (200k and 30k steps respectively) despite training to 400k, producing overconfident and unstable outputs — a practical finding for VLA checkpoint selection. Self-correction, where the robot visually re-assessed and redirected to the correct target, was observed in 14% of state-free trials exclusively. This study establishes a simulation baseline on this task and platform for VLA design choices prior to real-robot transfer.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_22"
    },
    {
      "id": "FrPo6P.23",
      "paperId": "202",
      "title": "Mapless Indoor Room Finding Using Directional Signs and Room Number Recognition",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525884",
          "name": "Choi, Eun Hyuk",
          "affiliation": "Department of Electronic Engineering, Kyung Hee University"
        },
        {
          "id": "131348",
          "name": "Kim, Donghan",
          "affiliation": "Kyung Hee University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Finding a target room in an indoor corridor environment is difficult to solve using only obstacle avoidance or local goal following. The robot must read directional signs at intersections, select the corridor branch that contains the target room, and then verify the room numbers beside the doors to reach the destination. In this paper, we propose a mapless semantic navigation system for indoor room finding without using a pre-built metric map. The proposed system uses directional signs and room numbers as semantic landmarks. Based on RGB camera perception, it determines both the corridor branch to follow and whether the target room has been reached. A YOLO-World-based detector first detects directional signs and door-plate regions. Then, a VLM and OCR read the room-number ranges on directional signs and the observed room numbers on door plates. The recognized semantic information is stored in a Scene Graph-based memory. The Rule Engine compares the target room number, sign ranges, and observed room-number sequence to determine the driving intent. Branch lock and target tracking conditions are also introduced to reduce incorrect branch selection and false approaches caused by intermediate room numbers. Experiments in an Isaac Sim indoor corridor environment show that the proposed system can find a target room using semantic landmarks without a prior map or predefined goal coordinates.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_23"
    },
    {
      "id": "FrPo6P.24",
      "paperId": "204",
      "title": "Projective Monocular Depth Correction for 2D Occupancy Grid Mapping",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "492031",
          "name": "Yoon, Chaehyun",
          "affiliation": "Sookmyung Women's University"
        },
        {
          "id": "216281",
          "name": "Lee, Alex",
          "affiliation": "Sookmyung Women’s University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control",
        "Sensors and Signal Processing"
      ],
      "abstract": "2D occupancy grid maps describe where a robot can travel and where obstacles are located, and are widely used for efficient robot navigation services. For cost-effective service robots, it is useful to update such maps from camera-based sensing rather than relying only on metric range sensors. Recent monocular depth models can convert RGB images into dense depth estimates, from which obstacle-height range measurements can be extracted as a camera-derived scan for 2D mapping. However, this scan is not a metric range scan. Frame-wise act either on the robot pose through SE(2) scan matching or on the whole scan through a single uniform scale, but these models cannot fully explain camera-induced range distortion. We propose a range-measurement correction method for camera-derived 2D occupancy mapping. A visual trajectory prior provides the initial map-frame pose, which is refined by a local SE(2) residual, while the camera-derived range measurements are corrected by a regularized determinant-normalized SL(3) measurement transform in scaled bearing and log inverse-range coordinates. The corrected ranges are fused by conservative ray casting along the original bearings without deforming the accumulated map. We evaluate the method against SE(2)-only and Sim(2)-scale baselines on indoor robot sequences, using LiDAR maps only as ground-truth references.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_24"
    },
    {
      "id": "FrPo6P.25",
      "paperId": "248",
      "title": "Uncertainty-Aware Filtering for Robotic Grasping in Limited Observation",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525848",
          "name": "Choi, Youngtae",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "409329",
          "name": "Lee, Munhaeng",
          "affiliation": "Pukyong National University"
        },
        {
          "id": "131893",
          "name": "Suh, Jinho",
          "affiliation": "Pukyong National University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Robust robotic grasping in limited observation environments remains challenging due to sensor occlusions and incomplete point clouds. Although deterministic shape completion networks can reconstruct missing geometry, they fail to quantify epistemic uncertainty, frequently leading to risky grasp proposals on hallucinated surface artifacts. To address this issue, we present a novel uncertainty-aware grasp filtering framework that directly bridges geometric perception and manipulation task spaces. We integrate Monte Carlo Dropout into a PoinTr backbone to estimate point-wise epistemic uncertainty based on the spatial variance of multiple stochastic forward passes. These point-wise uncertainties are then propagated into the grasp domain by aggregating them within the 3D bounding box of gripper candidates generated by GraspGen, formulating a density-independent grasp-space uncertainty metric. Leveraging a Top-K_s ranking strategy, our framework isolates unreliable surface artifacts and establishes a safety-verified grasp pool to select the optimal pose. Physics-based simulations in MuJoCo demonstrate that our framework substantially enhances both geometric reconstruction quality and downstream grasp success rates over conventional baselines.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_25"
    },
    {
      "id": "FrPo6P.26",
      "paperId": "329",
      "title": "Occupancy-Grounded Room Segmentation for Hierarchical 3D Scene Graphs",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "472918",
          "name": "Cueto Zumaya, Carlos Roberto",
          "affiliation": "University of Turku"
        },
        {
          "id": "362240",
          "name": "Catalano, Iacopo",
          "affiliation": "University of Turku"
        },
        {
          "id": "250142",
          "name": "Peña Queralta, Jorge",
          "affiliation": "Zurich University of Applied Sciences"
        },
        {
          "id": "208733",
          "name": "Bessa, Wallace M.",
          "affiliation": "Federal University of Rio Grande Do Norte"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "Hierarchical 3D scene graphs (3DSGs) for indoor robots organize geometric and semantic information across spatial scales, with a room layer that connects object-level perception to room-scale reasoning. Existing systems construct this layer from different spatial substrates (e.g., place clusters, wall planes, or segmentation outputs), and as a result, room nodes are not evaluated on a common geometric criterion. We present an occupancy-grounded 3DSG pipeline in which room nodes are anchored to tracked free-space regions derived from occupancy decomposition, giving each room an explicit polygonal footprint. We evaluate the pipeline on 12 Matterport3D scenes by matching predicted room polygons to annotated room instances and compare against Hydra, a representative state-of-the-art place-connectivity baseline. The results show that occupancy-grounded anchoring recovers substantially more room instances than place-connectivity construction, at the cost of lower precision, and that wall-accurate room boundaries remain an open problem for both methods. Code is available at https://github.com/crcz25/OccuSG.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_26"
    },
    {
      "id": "FrPo6P.27",
      "paperId": "380",
      "title": "HEDGe-Net: Geometric Priors and a Design Pattern for Off-Road 3D LiDAR Semantic Segmentation",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "506790",
          "name": "Ji, Youngseo",
          "affiliation": "Gachon University"
        },
        {
          "id": "464776",
          "name": "An, Jhonghyun",
          "affiliation": "Gachon University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Off-road 3D LiDAR semantic segmentation departs sharply from the urban regime that dominates the literature: vegetation is vertically continuous, the ground is class-bearing, and sparse distant safety-critical structures (poles, fences) dissolve into noise. We present a systematic study and a strong baseline on RELLIS-3D. (i) We characterize off-road failure as a four-mode taxonomy concentrating 96.4% of off-diagonal error mass, mapping each mode to a missing geometric prior and a specific inductive-bias mismatch of urban-tuned backbones. (ii) We report a new off-road state of the art - 49.24% float32 mIoU (the official, saturation-prone metric; 54.66% under a saturation-free int64 recount we introduce, for which no literature value yet exists) - from a single PT-v3 + 3D-SSL (Concerto) model on par with our prior five-member ensemble (49.04 / 54.45) - one model replacing five; a property of that recipe, not of the priors in (iii). A matched-recipe decomposition shows off-road performance is representation-bound: self-supervised initialization supplies nearly all of the gain, while post-hoc architectural priors give diminishing returns. (iii) We distill the discipline of safely augmenting a warm-init backbone into a reusable Design Pattern, instantiated by two transparently-reported geometric priors (HSE, DIG) whose headline effect is indistinguishable from zero at our seed budget - itself evidence for the representation-bound finding, not a separate performance claim.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_27"
    },
    {
      "id": "FrPo6P.28",
      "paperId": "383",
      "title": "3D Reconstruction of Tangled Deformable Linear Objects Using RGB-Guided Depth Fusion",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527987",
          "name": "Yoon, Youngbin",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "150612",
          "name": "Hong, Ayoung",
          "affiliation": "Chonnam National University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications"
      ],
      "abstract": "Accurate 3D shape reconstruction of Deformable Linear Objects (DLOs) such as ropes and cables is a fundamental prerequisite for robotic manipulation tasks, including knot-tying and cable routing. Existing methods rely either on color-based segmentation, which fails for monochrome objects, or provide only 2D centerline estimates without depth information, making it difficult to resolve crossing ambiguities under self-occlusion. We propose a training-free pipeline that reconstructs the full 3D shape of a monochrome DLO from RGB-D input. Boundary detection is performed by fusing RGB-estimated depth from Depth Anything V2 (DAV2) with sensor-measured depth from an Intel RealSense D435, where the two signals complement each other to capture boundaries that are otherwise difficult to detect. The detected boundaries partition the DLO mask into interior regions, from which centerline segments are connected via a direction-aware greedy matching algorithm. When the topology cannot be uniquely determined from a single observation, alternative candidates are maintained and refined with additional observations. Quantitative evaluation shows that our method achieves an F1 score of 97.8%, outperforming Canny, PiDiNet, and DiffusionEdge, and qualitative comparisons with mBEST and RT-DLO confirm its advantage for reconstructing monochrome tangled ropes.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_28"
    },
    {
      "id": "FrPo6P.29",
      "paperId": "541",
      "title": "HD-LIO: Bidirectional Degeneracy Feedback with Hierarchical Surfel Mapping for LiDAR-Inertial Odometry",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "453297",
          "name": "Hong, Euntae",
          "affiliation": "LGE"
        },
        {
          "id": "528655",
          "name": "Choi, Sungjin",
          "affiliation": "LG Electronics Inc"
        },
        {
          "id": "458410",
          "name": "Cho, Beom-Jin",
          "affiliation": "LG Electronics Inc"
        },
        {
          "id": "151640",
          "name": "Noh, DongKi",
          "affiliation": "LG Electronics Inc"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Navigation, Guidance and Control",
        "Robot Vision"
      ],
      "abstract": "LiDAR-inertial odometry (LIO) provides accurate real-time localization and mapping for autonomous navigation. Its accuracy, however, can degrade in feature-sparse scenes where scan to map residuals provide weak directional constraints. The problem is more severe with narrow-FOV LiDAR because the scan geometry limits the observable directions and allows drift to enter both the state estimate and the map. Existing tightly coupled LIO methods mainly handle this effect in the state update, while the map can still integrate biased points along weakly constrained directions. Asymmetry between the estimator and the map can sustain a drift map feedback loop that is not addressed by estimator side degeneracy handling alone. We present HD-LIO, a hierarchical surfel map LIO system with bidirectional degeneracy feedback. HD-LIO uses degeneracy cues from the information matrix to attenuate fine voxel map updates along rank deficient directions, restore directional constraints through a per query voxel cache correspondence source, and preserve that auxiliary source with an update gate under persistent degeneracy. A surfel eigenspectrum reliability weight addresses local measurement uncertainty in each scan to map residual, complementing a directional linearized error model of the joint state map dynamics underlying these map side operations. We evaluate HD-LIO on public dataset splits covering Livox Avia, Livox Mid-360, and Ouster OS1-16 data. HD-LIO achieves the lowest mean trajectory error in every sensor specific sequence group against the baseline methods. On the narrow-FOV indoor Avia sequences, HD-LIO remains bounded over complete runs while the baselines diverge.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_29"
    },
    {
      "id": "FrPo6P.30",
      "paperId": "455",
      "title": "Reflection-Robust Stereo Visual-Inertial Odometry Via Kalman-Filtered Ground-Height Estimation",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525397",
          "name": "Hwang, Uihyun",
          "affiliation": "KAIST"
        },
        {
          "id": "314574",
          "name": "Shin, Sungjae",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "525384",
          "name": "Kim, Dongjae",
          "affiliation": "KAIST"
        },
        {
          "id": "104490",
          "name": "Myung, Hyun",
          "affiliation": "KAIST (Korea Advanced Institute of Science and Technology)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Autonomous Vehicle Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Visual-inertial odometry relies on visual features that correspond to 3D points with consistent projections across sequential frames. In reflective indoor-floor environments, however, specular floor patterns can be detected and triangulated as virtual features below the physical ground plane, producing unreliable feature associations and inconsistent visual residuals. This paper proposes a lightweight reflection-aware front-end for feature-based stereo VIO. Rather than suppressing all floor-region features, the proposed method estimates the ground height in real time and rejects only feature candidates whose inferred 3D positions are below the estimated ground height. A floor-region mask restricts the validation process to reflection-prone regions, while stereo height uncertainty and pose uncertainty are used to construct frame-level ground-height measurements. A scalar Kalman filter with Normalized Innovation Squared (NIS) gating then provides a stable ground-height estimate, and an uncertainty-aware safety margin is used for selective below-ground virtual feature rejection. Experiments on real reflective-floor indoor sequences show that the proposed front-end generally improves trajectory accuracy in reflection-dominant environments while maintaining accurate ground-height estimates and recovering from actual ground-height changes.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_30"
    },
    {
      "id": "FrPo6P.31",
      "paperId": "477",
      "title": "Boundary-Aware Picking Center Generation for Foreign Object Removal in Continuous Dried-Red-Pepper Conveyor Frames",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528423",
          "name": "Shin, Sumin",
          "affiliation": "Korea Institute of Industrial Technology (KITECH)"
        },
        {
          "id": "407805",
          "name": "Lee, Yong Jun",
          "affiliation": "Korea University"
        },
        {
          "id": "537968",
          "name": "Inpyo, Lee",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "347438",
          "name": "Ahn, Woo Jin",
          "affiliation": "Inha University"
        },
        {
          "id": "216451",
          "name": "Myotaeg, Lim",
          "affiliation": "Korea University"
        },
        {
          "id": "138028",
          "name": "Lee, Kwang Hee",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "To bridge anomaly detection outputs with robotic manipulation, this work presents a decision-making layer tailored for spatial boundary resolution on a dried-red-pepper transport line. Standard frame-by-frame analysis often yields redundant picking actions because the same anomaly reappears across overlapping image boundaries. To mitigate this, our approach transforms candidate coordinates into localized targets via a smallest enclosing circle (SEC) formulation constrained by the effective suction radius Rend . Furthermore, the boundary region is partitioned into an overlap-body and a tail-zone, enabling dynamic assignment between immediate frame execution and cross-frame carry-over. In real conveyor test runs, the framework successfully streamlined target candidates from 29.68 to 12.58 target centers per frame while securing a finalized coverage rate of 1.000. Integrated physical testing demonstrated an overall extraction accuracy of 90.0% alongside a low latency of 97.32 ms for the vision-to-command pipeline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_31"
    },
    {
      "id": "FrPo6P.32",
      "paperId": "535",
      "title": "Bridging the Sim-To-Real Gap in Quadrupedal Visual Navigation Via 3D Gaussian Splatting",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528633",
          "name": "Lee, Minseok",
          "affiliation": "Handong Global University"
        },
        {
          "id": "528490",
          "name": "Han, Seongyu",
          "affiliation": "Handong Global University"
        },
        {
          "id": "528552",
          "name": "Mun, Huijae",
          "affiliation": "University"
        },
        {
          "id": "300170",
          "name": "Hwang, Sung Soo",
          "affiliation": "Handong Global University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "Deploying visual navigation on physical quadrupedal robots is challenging due to the visual sim-to-real gap and locomotion-induced camera jitter. This jitter degrades feature tracking and depth consistency. This paper presents a pipeline that bridges these perceptual and dynamic gaps to enable virtual parameter optimization. In the simulation stage, we reconstruct a 3D Gaussian Splatting (3DGS) digital twin of a campus corridor and use a reinforcement learning (RL) locomotion policy to generate camera bobbing noise. Under these simulated visual and dynamic disturbances, the parameters of the RTAB-Map visual SLAM and Nav2 stacks are optimized. For deployment, the RL policy is bypassed, and velocity commands are routed directly to the physical robot’s built-in Sport API via a ROS 2 bridge. Real-world experiments demonstrate that parameters optimized under simulated jitter transfer directly to the physical platform, supporting visual mapping and qualitative obstacle-aware replanning without manual recalibration.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_32"
    },
    {
      "id": "FrPo6P.33",
      "paperId": "547",
      "title": "Brick3D: Brick Detection and Localization Based on VLMs for Masonry Construction Drones",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "340572",
          "name": "Valdes Saucedo, Mario Alberto",
          "affiliation": "Lulea University of Technology"
        },
        {
          "id": "354763",
          "name": "Stamatopoulos, Marios-Nektarios",
          "affiliation": "Luleå University of Technology"
        },
        {
          "id": "199367",
          "name": "Kanellakis, Christoforos",
          "affiliation": "LTU"
        },
        {
          "id": "105882",
          "name": "Nikolakopoulos, George",
          "affiliation": "Luleå University of Technology"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents Brick3D, a monocular camera-based perception framework for UAV-assisted masonry construction that enables the detection, condition assessment, and metric localization of construction bricks using only onboard visual sensing. The proposed system leverages vision-language models (VLMs) to perform zero-shot semantic segmentation, allowing robust brick detection without task-specific retraining and enabling adaptation to varying brick appearances and construction environments. A coverage-based integrity assessment method evaluates the correspondence between segmented regions and their expected geometry, classifying bricks as undamaged, damaged, or uncertain under partial visibility conditions. For localization, the framework combines refined corner observations with a Perspective-n-Point (PnP) formulation to estimate the full 6-DoF pose of each brick relative to the onboard camera. To improve monocular localization accuracy, an offline nonlinear calibration model and Kalman filtering stage are introduced to compensate for systematic bias and reduce temporal noise. Experimental validation in both controlled laboratory and real-world indoor and outdoor environments demonstrates reliable brick detection, robust damage classification, and accurate localization.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_33"
    },
    {
      "id": "FrPo6P.34",
      "paperId": "567",
      "title": "Real-Time Classification and Pose Estimation of Humans and Legged Humanoids",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528711",
          "name": "Kang, GyeongRim",
          "affiliation": "JeonBuk National University"
        },
        {
          "id": "407616",
          "name": "Kim, KangGeon",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "186197",
          "name": "Jo, HyungGi",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Human-Robot Interaction",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Humans and legged humanoids may be observed in the same workspace. The difficult cases considered in this study occur when their image trajectories cross and a temporary occlusion interrupts a track. After re-entry, a detection can then be associated with the wrong entity. We address this case with a single-RGB pipeline that performs 2D pose estimation, classification, tracking, and identity recovery together in near real-time. A single-stage multi-person pose estimator provides the keypoints, MobileNetV3-Small supplies track-level class evidence through temporal voting, and a dual-track Re-ID stage handles lost identities. On the recorded occlusion and re-entry sequences, the classifier reached 98.99% accuracy and a macro F1 score of 0.986. The complete pipeline used 181 MB of GPU VRAM on the target platform.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_34"
    },
    {
      "id": "FrPo6P.35",
      "paperId": "587",
      "title": "Adaptive Object Localization with Depth Reliability-Aware Innovation-Gated Kalman Filter for Small Swarm Robot Systems",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528713",
          "name": "Kim, Seonggeon",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "109584",
          "name": "Lee, Heoncheol",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Robotic Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "This paper addresses unstable RGB-D-based object localization on resource-constrained small robot platforms. Noisy depth measurements from individual robots can produce inconsistent object position estimates, which may subsequently degrade object-level map merging. RGB-D depth measurements are susceptible to noise, occlusion, and transient depth spikes, causing inconsistent object positions and duplicated landmarks in terms of map merging. To address this, we propose Depth Reliability-aware Innovation-Gated Adaptive Kalman filter (DRIG-AKF), which stabilizes object position estimates by quantifying depth reliability from valid depth ratio, depth variance, and object distance, and incorporating it into an adaptive measurement covariance. An innovation-gated mechanism suppresses transient depth spikes via Mahalanobis innovation distance gating, and the stabilized positions and their covariance estimates can be transmitted as inputs to a subsequent map-merging stage. The proposed depth reliability model and innovation gating are directly validated using a separate recording with raw per-pixel depth measurements. The overall framework is evaluated on three real-world datasets using bounding-box-derived reliability proxies due to the absence of per-pixel depth logs, demonstrating an average position standard deviation reduction of 66.9% over EMA smoothing and 27.5% over a KF+Hungarian baseline, with reductions of up to 79.5% and 54.1%, respectively, in datasets where the reliability indicators more accurately reflect depth measurement quality.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_35"
    },
    {
      "id": "FrPo6P.36",
      "paperId": "649",
      "title": "Preserving Fine Details in Semantic-Map-Conditioned LiDAR Generation Via Pixel-Space Diffusion",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "465626",
          "name": "Lee, Jaewon",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "147191",
          "name": "Kim, Jiwoong",
          "affiliation": "Korea Institute of Industrial Technology(KITECH)"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "LiDAR sensors provide precise 3D measurements of the surrounding environment and are widely used for perception in autonomous driving and robotics. However, collecting real driving data that covers diverse and rare situations is costly, which has motivated research on synthetic LiDAR scene generation using diffusion models. To reduce computation, most existing methods generate scenes in a compressed latent space and decode them back to the original resolution. This decoding is lossy, and the loss becomes critical when a semantic map is used as a condition, since the condition is also compressed and its detailed structure is not fully preserved. In this paper, we adapt PixelDiT, a pixel- space diffusion transformer, to conditional LiDAR range-image generation. Instead of encoding the range image and the semantic map into a compressed latent space, we inject the semantic map as tokens at native resolution. This helps the generated scan retain thin and small-scale structures that a latent-space model tends to blur. On the SemanticKITTI Semantic-Map-to-LiDAR task, the proposed method follows the semantic condition more faithfully than a latent-space baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_36"
    },
    {
      "id": "FrPo6P.37",
      "paperId": "678",
      "title": "Keyframe-Based LiDAR Scan-To-Map Registration in a Greenhouse Corridor",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "394320",
          "name": "Park, Taewook",
          "affiliation": "Ulsan National Institute of Science & Technology"
        },
        {
          "id": "532301",
          "name": "Lee, Seunghoon",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "532299",
          "name": "Yun, Won-Jae",
          "affiliation": "METAFARMERS Inc"
        },
        {
          "id": "532302",
          "name": "Lee, Kyu-Wha",
          "affiliation": "METAFARMERS Inc"
        },
        {
          "id": "148890",
          "name": "Oh, Hyondong",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Robot Vision",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Greenhouse robots require reliable localization despite unavailable or unreliable Global Navigation Satellite System signals and limited geometric features along crop corridors. We present a LiDAR-based localization method that registers multi-session scans to a unified prebuilt point cloud map using point-to-plane iterative closest point registration and LiDAR--inertial odometry priors. Evaluation in a 50 m-long commercial tomato greenhouse corridor demonstrates consistent multi-session localization in a common map frame, with position and orientation RMSEs below 3.5 cm and 4.8 degree, respectively.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_37"
    },
    {
      "id": "FrPo6P.38",
      "paperId": "43",
      "title": "OR-MR: Structure-Aware Multi-Candidate Planning for Multi-Depot Grid Coverage",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "523964",
          "name": "Seo, JangHo",
          "affiliation": "Kyungpook National University"
        },
        {
          "id": "212765",
          "name": "Lee, Joonwoo",
          "affiliation": "Kyungpook National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Multi-depot multi-robot coverage path planning aims to cover all free cells while each robot starts from and returns to its own depot, making the longest closed route the mission-time bottleneck. Existing grid-based planners usually commit to a single decomposition or growth rule, and their makespan can change significantly with obstacle bottlenecks and depot placement. This paper presents OR-MR (Ownership-Routed Multi-Robot), a structure-aware bounded heuristic portfolio for 4-connected grid coverage. OR-MR constructs solutions on a common 2×2 supercell substrate, applies a rule-based Cut Rule using map-cut and depot-geometry features to activate a small set of synchronized balanced supercell growth (SBSG) and Peak-Balance candidates (observed K=1–13 per scenario), and selects the final plan by route-level closed makespan. On 18 corner-anchored scenarios over six 50×50 maps, OR-MR improves the closed makespan in most cases against three representative baselines, with the largest gains on the split-rich Map 4.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_38"
    },
    {
      "id": "FrPo6P.39",
      "paperId": "72",
      "title": "ELite++: Efficient Lifelong LiDAR Mapping Via Window-Based Registrationand Voxel Ratio Maps",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525329",
          "name": "Lee, GeonHui",
          "affiliation": "Seoul National University"
        },
        {
          "id": "257470",
          "name": "Gil, Hyeonjae",
          "affiliation": "SNU"
        },
        {
          "id": "126962",
          "name": "Kim, Ayoung",
          "affiliation": "Seoul National University"
        },
        {
          "id": "311476",
          "name": "Jung, Minwoo",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Long-term LiDAR mapping requires clean and consistent static maps across repeated sessions in dynamic environments. Existing lifelong mapping pipelines combine session alignment, dynamic filtering, and map update, but repeated dense point-wise updates and candidate-dependent alignment can limit scalability. To tackle these issues, we present ELite++, an efficient extension of ELite that combines automatic window-based registration, aligned-session dynamic object removal, and compact Voxel Ratio Map integration. ELite++ removes transient objects while preserving static structures through hit-exposure voxel stability, local ground protection, and structure-aware refinement. Experiments on diverse LiDAR datasets show improved dynamic object removal over existing DOR methods, preserved multi-session alignment quality, and runtime reduced to 11% of the original pipeline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_39"
    },
    {
      "id": "FrPo6P.40",
      "paperId": "120",
      "title": "Human-In-The-Loop Replanning for Instruction-Guided Object Retrieval in Fire Environments",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "462012",
          "name": "Song, Yuri",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "490931",
          "name": "Kim, Yeonjin",
          "affiliation": "Kwangwoon University"
        },
        {
          "id": "159267",
          "name": "Oh, Junghyun",
          "affiliation": "Kwangwoon University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Human-Robot Interaction",
        "Navigation, Guidance and Control"
      ],
      "abstract": "Disaster-response robots must operate under evolving hazards while respecting user instructions. In fire environments, predicted object risk can conflict with the retrieval priority implied by a natural-language instruction: a lower-priority target may become urgent, whereas automatic risk-based replanning may violate the user’s intent. This paper formulates this problem as instruction-conditioned object retrieval under dynamic fire risk. We propose a Priority- Aware Human-in-the-Loop (PA-HITL) replanning framework that extracts target objects and a preferred order, estimates predicted object risk, and presents reorder suggestions when risk-based urgency conflicts with instruction-implied priority. The final execution target is determined through accept/reject decisions instead of automatic reordering. Experiments in the HAZARD fire environment show that, compared with fully automatic risk-based replanning, PA-HITL improves SR from 0.55 to 0.60 in Kitchen and from 0.65 to 0.71 in Craftroom, while maintaining comparable Safe-SR (0.35 vs. 0.36 in Kitchen and 0.40 vs. 0.41 in Craftroom). Compared with No HITL, PA-HITL also improves Safe-SR from 0.20 to 0.35 in Kitchen and from 0.25 to 0.40 in Craftroom.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_40"
    },
    {
      "id": "FrPo6P.41",
      "paperId": "128",
      "title": "Robotic Manipulator Trajectory Stabilization Via Imitation-Guided Reinforcement Learning",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525586",
          "name": "Lee, Hojeong",
          "affiliation": "Korea University"
        },
        {
          "id": "525589",
          "name": "Cho, Hyemin",
          "affiliation": "Korea University"
        },
        {
          "id": "525585",
          "name": "Lee, Seunghoon",
          "affiliation": "Korea University"
        },
        {
          "id": "471995",
          "name": "Park, Cheol Hoon",
          "affiliation": "Korea University"
        },
        {
          "id": "407805",
          "name": "Lee, Yong Jun",
          "affiliation": "Korea University"
        },
        {
          "id": "454506",
          "name": "Park, Jong-Chan",
          "affiliation": "Korea University"
        },
        {
          "id": "116455",
          "name": "Lim, Myo-Taeg",
          "affiliation": "Korea University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Imitation learning enables agents to acquire skills by observing and learning from expert demonstrations, and has recently attracted significant attention in robotics. However, these demonstrations do not guarantee optimal behavior, and deploying trajectories generated by imitation learning policies in real-world environments can result in abrupt joint movements, instability, and compounding errors. To address these issues, we propose an imitation-guided reinforcement learning framework that leverages imitation learning trajectories as reference paths and learns a stable trajectory-tracking policy through reinforcement learning. Specifically, we generate reference joint trajectories using an action chunking transformer-based imitation learning policy, and further optimize a control policy via proximal policy optimization to track the trajectories while suppressing joint velocities and action variations. Experimental results demonstrate that the proposed framework reduces joint oscillations by approximately 26% compared to baseline imitation learning, confirming that reinforcement learning enhances control stability while maintaining the task-level behaviors acquired through imitation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_41"
    },
    {
      "id": "FrPo6P.42",
      "paperId": "153",
      "title": "Temporal Context Conditioning for Action Chunk Continuity in Vision-Language-Action Model",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "203067",
          "name": "Shin, Dongin",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "319740",
          "name": "Moon, JongSul",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "185955",
          "name": "Kim, YoungOuk",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "331717",
          "name": "Kim, Wonha",
          "affiliation": "Kyung Hee University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Vision-Language-Action (VLA) models have advanced robot action generation, yet existing approaches lack explicit modeling of temporal continuity at action chunk boundaries, leading to trajectory discontinuity and abrupt velocity changes in long-horizon tasks. This paper proposes Temporal Context Conditioning, a framework that injects the previous action trajectory and vision-language hidden representation into the Flow Matching-based Diffusion Transformer (DiT) via Feature-wise Linear Modulation (FiLM). A Boundary Gap Metric is introduced to quantify inter-chunk discontinuity. On the LIBERO benchmark, the proposed method improves the average success rate by 6.0% over the baseline and reduces the Boundary Gap by 15.8%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_42"
    },
    {
      "id": "FrPo6P.43",
      "paperId": "158",
      "title": "IRM-Guided Model Predictive Control for Mobile Manipulator",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "401768",
          "name": "Choi, JungHyun",
          "affiliation": "University of Seoul"
        },
        {
          "id": "414027",
          "name": "Lee, Taegyeom",
          "affiliation": "University of Seoul"
        },
        {
          "id": "100369",
          "name": "Hwang, Myun Joong",
          "affiliation": "University of Seoul"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control"
      ],
      "abstract": "This paper presents an inverse reachability map (IRM)-guided model predictive control framework for end-effector trajectory tracking by mobile manipulators. A precomputed three-dimensional IRM is used to evaluate base regions that are kinematically favorable for each desired end-effector pose. At each prediction step, the IRM is sliced into a two-dimensional base preference map and combined with environmental safety information using a multiplicative safety mask. The local weighted centroid around the predicted base position is then used as an IRM-guided reference in the mobile base MPC objective. The overall structure of the proposed framework is shown in Fig. 1. Unlike conventional IRM-based methods that mainly determine static base placements or select discrete candidate poses, the proposed method incorporates IRM information online to continuously guide the mobile base toward regions that support end-effector reachability and favorable arm manipulability. The manipulator controller tracks the global end-effector reference in the current base frame, while the base MPC accounts for the IRM-guided reference, heading consistency, and input regularization. Gazebo simulations with a Scout 2.0 mobile base and a Franka Panda manipulator show that the proposed IRM-MPC improves the base configuration compared with the baseline, as illustrated in Fig. 2, and reduces end-effector position tracking error while maintaining more consistent Yoshikawa manipulability, as shown in Fig. 3.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_43"
    },
    {
      "id": "FrPo6P.44",
      "paperId": "167",
      "title": "Shared Autonomy for Teleoperation Using Probabilistic Estimation of Primitive Motion Intent",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "255221",
          "name": "Lee, Haeseong",
          "affiliation": "Seoul National University"
        },
        {
          "id": "397518",
          "name": "Yoon, Junheon",
          "affiliation": "Seoul National University"
        },
        {
          "id": "397517",
          "name": "Lee, Yonghee",
          "affiliation": "Seoul National University"
        },
        {
          "id": "101200",
          "name": "Park, Jaeheung",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Human-Robot Interaction",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper proposes a shared autonomy method that enables a teleoperated robot system to infer human intent. Teleoperation has significant potential for hazardous-environment operations and human demonstration data collection. However, teleoperation remains challenging due to limited feedback, communication latency, and embodiment mismatch between humans and robots. To improve teleoperation efficiency, various shared autonomy methods, such as policy blending, have been actively studied. However, existing approaches often require task-specific robot actions and may reduce the operator’s control authority. To address these limitations, the proposed method focuses on estimating the primitive motion intent of the operator, including translation-only, rotation-only, and combined motions. For this purpose, a lightweight estimator is developed to predict the probability of each motion primitive. Also, based on the probabilistic estimation, unintended human command is suppressed while preserving the control authority. Finally, real-robot experiments demonstrate that the proposed framework improves task efficiency during teleoperation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_44"
    },
    {
      "id": "FrPo6P.45",
      "paperId": "187",
      "title": "Actuator-Aware Inverse Kinematics with Joint-Limit Admissibility for Torque-Controlled Redundant Robots",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "463518",
          "name": "Dastranj, Mohammad",
          "affiliation": "Tampere University"
        },
        {
          "id": "333274",
          "name": "Hejrati, Mahdi",
          "affiliation": "Tampere University"
        },
        {
          "id": "333311",
          "name": "Mattila, Jouni",
          "affiliation": "Tampere University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper proposes actuator-aware inverse kinematics for torque-controlled redundant robots under joint-limit constraints. In the considered architecture, the inverse-kinematic output is not merely a purely kinematic joint-velocity command; it is the required joint velocity supplied to a downstream torque-level controller. Therefore, a small commanded task residual may not necessarily improve realized motion. The proposed method formulates a convex quadratic programming problem whose decision variable is the joint-level required velocity. Control barrier function style bounds impose reference-level joint-limit admissibility, while the task equation is handled through a penalized slack variable. Redundancy is resolved using a controller-compatibility objective that accounts for previous-command consistency and actuator torque-capacity weighting. The method is independent of the particular torque-level controller and can serve as an intermediate IK layer between an endpoint trajectory and a redundant robot controller. Experiments on a virtual-decomposition-controlled seven-degree-of-freedom upper-limb exoskeleton compare the method with standard inverse-kinematic baselines and a constrained task-preserving quadratic programming baseline. The results indicate substantially lower limit-pushing commands, bounded admissible required velocities, and reduced maximum position error while maintaining competitive realized task tracking in the tested trajectory, without modifying the downstream controller.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_45"
    },
    {
      "id": "FrPo6P.46",
      "paperId": "188",
      "title": "Design and Dynamic Modeling of a Hybrid Compliant End-Effector with Feedforward Compensation for Robotic Surface Processing of Reclaimed Timber",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525002",
          "name": "Elsayed, Ahmed Sedky Mohamed",
          "affiliation": "NTNU"
        },
        {
          "id": "526005",
          "name": "Garammatikos, Sotirios",
          "affiliation": "NTNU"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Control Theory and Applications"
      ],
      "abstract": "Automated surface preparation of reclaimed timber remains a key barrier to wider structural reuse. The main challenge is maintaining consistent contact force over geometrically uncertain surfaces that combine hard contaminants with a soft, damage-sensitive substrate. This paper presents the design and dynamic modeling of a hybrid compliant end-effector that pairs a passive spring-based compliance stage with an active motor-driven feedforward compensator. The mechanism comprises four linear guides, eight bearings, two compression springs (equivalent stiffness 500 N/m), a force sensor, and two anti-twisting guides. The system is modeled as a Simscape Multibody digital twin and evaluated under a ±5 mm sinusoidal surface-height disturbance with an 18 N force setpoint. The feedforward-augmented PID controller reduces the initial contact transient by 46.7%, steady-state RMS force error by 30.8% (from 1.03% to 0.71% of setpoint), and mean absolute error by 32.4% compared with PID alone.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_46"
    },
    {
      "id": "FrPo6P.47",
      "paperId": "192",
      "title": "Demonstration Temporal Resolution Analysis for Visuomotor Diffusion Policy in Precision Electrical Component Assembly",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "341416",
          "name": "Kim, Ikjune",
          "affiliation": "Korea Atomic Energy Research Institute"
        },
        {
          "id": "167555",
          "name": "Joo, Sungmoon",
          "affiliation": "Korea Atomic Energy Research Institute"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "The automation of electrical component assembly remains challenging due to tight-tolerance insertion requirements. Purely visuomotor approaches offer practical deployment advantages, but introduce an underexplored data collection parameter: demonstration temporal resolution, which refers to the robot's travel distance between consecutive frames in the demonstration training data. It is defined as the per-frame end-effector displacement determined by the robot's end-effector speed and data sampling frequency. This work formalizes its constraints in diffusion-based imitation learning, showing that the feasible range is bounded below by the robot's kinematic repeatability (preventing state aliasing) and above by the task's geometric clearance (avoiding intra-step collisions). Experiments across nine temporal resolution settings with matched training-data volume identify the feasible range and derive experimentally calibrated data collection guidelines, validated on a PDU surrogate with 2.0 mm radial clearance across 150 trials, achieving 80%–92% per component and overall 85%, using the alternative hardware setup.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_47"
    },
    {
      "id": "FrPo6P.48",
      "paperId": "201",
      "title": "Characterizing Hard-To-Automate Manufacturing Processes for Robotic Automation: Data-Driven Difficulty Factors and a Mapping to Robot Technologies",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "157455",
          "name": "Lee, Jaeseon",
          "affiliation": "KITECH"
        },
        {
          "id": "483966",
          "name": "Im, Subin",
          "affiliation": "SungKyunKwan University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Industrial Applications of Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Korea has the world’s highest manufacturing robot density, yet many processes are still performed manually, and judging which ones are hard to automate has relied on inconsistent qualitative judgment. We build a quantitative basis for that judgment from 593 robotic-automation consulting cases (2016–2025). Of these, 353 non-trivial processes were assessed against eighteen difficulty factors spanning the object, task, and environment. Rather than scoring expert verdicts directly, we reverse-engineer the relationship between the experts’ factor checks and their grades through ordinal regression, yielding data-based weights and seven core factors (led by shape complexity and skill dependency) from which we derive an integer scoring scheme; suppressor factors are identified and excluded. The seven-factor scheme reproduces the expert grades about as well as the full model while remaining simpler (75.9% vs. 74.4% accuracy for high-or-above), and its scores follow the known difficulty ranking across process groups. We further map the core factors onto the enabling technologies (perception, grasping, contact/precision control, and task planning). The gap between the objective-factor model and an expert baseline quantifies how far the judgment can be made explicit, with a residual tied to experience, most clearly in skill dependency. External validation is planned through a national R&D program (2027–2030).",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_48"
    },
    {
      "id": "FrPo6P.49",
      "paperId": "205",
      "title": "STG 3.0: Time-Dependent Semantic Topological Graphs for Human-Aware Service Robots",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "137960",
          "name": "Park, Jeong-Seop",
          "affiliation": "Korea University"
        },
        {
          "id": "407805",
          "name": "Lee, Yong Jun",
          "affiliation": "Korea University"
        },
        {
          "id": "454506",
          "name": "Park, Jong-Chan",
          "affiliation": "Korea University"
        },
        {
          "id": "347438",
          "name": "Ahn, Woo Jin",
          "affiliation": "Inha University"
        },
        {
          "id": "461874",
          "name": "Woo, Jong Jin",
          "affiliation": "LG Electronics"
        },
        {
          "id": "116455",
          "name": "Lim, Myo-Taeg",
          "affiliation": "Korea University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Human-Robot Interaction"
      ],
      "abstract": "Household service robots must often locate a target user before providing services such as delivery or assistance. However, existing navigation and Vision–Language–Action (VLA) frameworks mainly rely on static semantic information and do not explicitly model human location over time. This paper presents STG 3.0, a time-dependent semantic topological graph for proactive human search. STG 3.0 combines a static Home-Tree representation with dynamic human nodes connected through time-dependent probabilistic edges learned from patrol observations. By integrating user-location probabilities into graph-based planning, the robot prioritizes locations where the target user is most likely to be found. Experiments in simulated and real indoor environments demonstrate reliable semantic mapping and reduced search time compared with conventional search strategies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_49"
    },
    {
      "id": "FrPo6P.50",
      "paperId": "645",
      "title": "Sensorless Admittance Control Based on Velocity Response Deviation under a Low Control Update Rate",
      "session": "FrPo6P",
      "date": "2026-10-30",
      "start": "09:30",
      "end": "10:30",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532024",
          "name": "Kim, Jiseong",
          "affiliation": "Keimyung University"
        },
        {
          "id": "532020",
          "name": "Jo, Jaemin",
          "affiliation": "Keimyung University"
        },
        {
          "id": "187594",
          "name": "Choi, Junghyun",
          "affiliation": "Keimyung University"
        }
      ],
      "keywords": [
        "Control Theory and Applications",
        "Human-Robot Interaction",
        "Industrial Applications of Control"
      ],
      "abstract": "This paper presents a sensorless admittance-control structure for a speed-controlled motor drive under a low control update rate. Velocity-response deviation between the reference and encoder-based angular velocity is converted into a torque-equivalent signal and applied to a virtual inertia-damping model without an external force/torque (F/T) sensor or internal drive signals. Experimental results confirmed force-responsive reference modification consistent with torque-sensor-based control and demonstrated feasibility under the low update-rate condition.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo6p_50"
    },
    {
      "id": "FrPo7P.1",
      "paperId": "247",
      "title": "DigitForce: Channel-Decoupled Force Tokenization for Transformer-Based Humanoid Dexterous Manipulation",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "363041",
          "name": "Kim, Beomjoon",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "526155",
          "name": "Kim, Yunhan",
          "affiliation": "Korea Electronics Technology Institute"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Contact-rich humanoid manipulation depends on finger-localized contact cues that are difficult to infer from RGB and joint states. We present DIGITFORCE, a channel-decoupled state tokenizer that addresses a fused-state token bottleneck in Action Chunking Transformer (ACT)-based imitation learning. In the standard fused design, proprioception and force readings are projected into one state token, limiting channel-level access to transformer attention. DIGITFORCE keeps the RGB encoder, ACT backbone, decoder, action head, training objective, and deployment interface unchanged. Proprioception is encoded as one token, and each finger-associated force channel is encoded as a separate token. Force readings are used only as observations, with no change to the action space or controller. On a real Unitree G1 with dual five-finger Inspire Hand DFX hands performing a color-sequence block-stacking task, task success rates across 50 rollouts per policy are 62%, 76%, and 92% for Proprio-ACT, Concat-ACT, and DIGITFORCE, respectively, and DIGITFORCE shows shorter failed-grasp recovery intervals and smaller arm-retreat excursions than the fused-token baseline. Matched offline force-channel interventions show that DIGITFORCE produces sharper phase-dependent channel selectivity than the fused-token baseline and induces larger action shifts in hand-joint dimensions. The mean hand-to-arm sensitivity ratio increases from 1.05 in the fused-token baseline to 1.40 in DIGITFORCE. These results suggest that channel-decoupled force tokens provide channel-addressable contact cues for hand-joint action prediction, without tactile skin, a force-control head, or a new action interface.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_01"
    },
    {
      "id": "FrPo7P.2",
      "paperId": "296",
      "title": "Energy-Cost-Based Prioritized Path Planning for Multiple Ground-Aerial Bimodal Robots",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525715",
          "name": "Lee, Dongeun",
          "affiliation": "Kookmin University"
        },
        {
          "id": "127287",
          "name": "Lee, Seung-Mok",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Navigation, Guidance and Control"
      ],
      "abstract": "This paper presents an energy-cost-based prioritized path-planning method for multiple passive ground-aerial bimodal robots operating in obstacle environments. Passive bimodal robots can reduce energy consumption through ground locomotion and overcome obstacles through aerial locomotion, but aerial motion requires significantly higher energy to support the robot weight. To address this trade-off, the proposed method evaluates motion primitive costs using a mode-dependent energy model and constructs a Dijkstra-based heuristic from unit-distance energy costs. Robot paths are planned sequentially according to a fixed priority order using an energy-cost A∗ search over safe interval path planning(SIPP) states. The paths of higher-priority robots are stored in a reservation table and used as time-dependent constraints for lower-priority robots. Simulations were conducted in two obstacle environments: a narrow-gap environment that induces inter-robot congestion and a wall-obstacle environment that requires aerial locomotion. The results show that the proposed bimodal planner reduces travel time compared with ground-only planning and reduces energy consumption compared with aerial-only planning, demonstrating collision-free and energy-efficient multi-robot path planning.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_02"
    },
    {
      "id": "FrPo7P.3",
      "paperId": "352",
      "title": "Automated Strawberry Packaging System Based on Vision Sensing and Re-Orientation Gripper Mechanism",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "501060",
          "name": "Shin, WooSeong",
          "affiliation": "Hanyang University"
        },
        {
          "id": "435016",
          "name": "Lee, Minsu",
          "affiliation": "Hanyang University"
        },
        {
          "id": "396151",
          "name": "Choi, Jeongseok",
          "affiliation": "Hanyang University"
        },
        {
          "id": "140339",
          "name": "Seo, TaeWon",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Vision",
        "Robot Mechanism and Control"
      ],
      "abstract": "This study proposes an integrated robotic system designed to pick randomly arranged harvested strawberries without damage and automatically place them into egg-tray-style containers. To address the growing trend of egg-tray-style strawberry packaging and the challenge of labor shortages, this system implements an automated process that combines mechanical adaptability with vision sensing. First, a two-fingered fin-ray gripper fabricated via silicone casting was utilized to achieve passive adaptive grasping of irregularly shaped strawberries while minimizing physical damage. At wrist, remote center of motion (RCM) mechanism wrist was introduced to ensure efficient placement angles within narrow containers. For the grasping strategy, YOLOv8-pose is employed to extract four keypoints(top, bottom, left, and right) of the strawberry. These points are used to determine the grasping position and angle and estimate the fruit's weight for grade classification. Experimental results confirm that the entire process—from recognition and grasping to weight estimation and packaging—is successfully performed within the integrated system, demonstrating the practical potential for automating strawberry packaging processes that currently rely heavily on manual labor.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_03"
    },
    {
      "id": "FrPo7P.4",
      "paperId": "374",
      "title": "Pre-Execution Feasibility Checking for Language-Guided Robotic Manipulation Via 3D Scene Graph and Object Ontology",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527967",
          "name": "Kim, Haryeong",
          "affiliation": "Sungkyunkwan University"
        },
        {
          "id": "319832",
          "name": "Kuc, Tae-Yong",
          "affiliation": "Sungkyunkwan University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Robot Vision"
      ],
      "abstract": "Pre-execution reasoning about whether a robot can successfully carry out a natural-language command remains a key challenge in language-guided service robotics. Existing approaches predominantly rely on geometry-based grasp planning while overlooking semantic object properties such as weight, movability, and gripper compatibility, often resulting in repeated attempts to execute physically infeasible actions. This paper presents a reasoning framework that integrates 3D Scene Graph construction with Object Ontology Extraction to assess the feasibility of commanded actions before execution. Using RGB-D scans, the framework automatically constructs per-object ontological representations across three layers—Symbolic, Explicit, and Implicit—providing the semantic grounding required for feasibility reasoning beyond geometric appearance. Lift feasibility is estimated by combining a category-level knowledge base with commonsense inference from a large language model; grasp feasibility is determined from point-cloud geometry relative to gripper constraints; movability is inferred from an implicit ontological attribute; and reachability is verified using the manipulator’s inverse kinematics solver. The extracted attributes and spatial relationships are organized into a 3D Scene Graph, enabling language-conditioned grounding of target objects. A feasibility function, F(o), jointly evaluates these four predicates to determine whether the commanded action should be executed. When any predicate is not satisfied, the framework returns interpretable feedback to the planning layer. Experiments conducted in Isaac Sim using a wheeled mobile manipulator equipped with a UR5 arm demonstrate that the proposed reasoning layer reduces unnecessary execution attempts from 37.5% to 10.0% and improves the task success rate from 62.5% to 85.0% compared with a geometry-only baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_04"
    },
    {
      "id": "FrPo7P.5",
      "paperId": "402",
      "title": "Real-Time Evaluation and Few-Shot Hardware Adaptation of a Vision-Based Tactile Sensor",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "419012",
          "name": "Park, Juhee",
          "affiliation": "KAIST(Korea Advanced Institute of Science and Technology)"
        },
        {
          "id": "182053",
          "name": "Min, Seojung",
          "affiliation": "KAIST"
        },
        {
          "id": "115549",
          "name": "Kim, Jung",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing"
      ],
      "abstract": "Vision-based tactile sensing is increasingly judged by offline test-set accuracy, yet the quantity that matters for robotics is accuracy under live contact on the deployed hardware. Reported accuracy can fall under real-time robotic contact and degrade further when the gel pad or sensor unit is replaced. We quantify both effects on a DIGIT sensor mounted on a 7-DOF Kinova Gen2 arm classifying five sandpaper grit levels (P100–P400). A model that reaches 96.76% on a static test set drops to 88.2% in real time on the same hardware, and falls to 78.0% on a previously unseen sensor-gel configuration. Swapping the gel pad alone accounts for most of the variation we observe across configurations seen during training. Fine-tuning on as few as 14 images per class recovers the hardware-induced gap, reaching a peak of 94.8% at 70 images per class. Offline accuracy is therefore an unreliable indicator of deployed performance, but the cost of adapting to a new hardware configuration can be small.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_05"
    },
    {
      "id": "FrPo7P.6",
      "paperId": "434",
      "title": "Development of a Welding Torch Collision Avoidance Algorithm for Curved Weld Seam Tracking on 3D Pre-Deformed Aluminum Ship Structural Members",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "326407",
          "name": "Park, In-Gyu",
          "affiliation": "KIRO, Korea Institute of Robot and Convergence"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Industrial Applications of Control",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper proposes a welding torch collision avoidance algorithm for aluminum ship structural members with 3-dimensional curved lines. In the target CTV fabrication process, the aluminum member is pre-deformed to compensate for predicted welding distortion, and jig clamps are installed to maintain the deformed shape. These clamps can become obstacles during robotic welding. To address this problem, a collaborative robot-based welding system using the HCR14 robot was modeled, and a torch path generation method was developed. The curved weld seam was generalized using a cubic polynomial fitting algorithm based on the least squares method. The fitting accuracy was evaluated using RMSE, and the errors in the x, y, and z directions were 0.5656 mm, 0.2395 mm, and 7.9964×10−11 mm, respectively. Torch posture was controlled using Euler angles to follow the curvature-center direction while satisfying the work angle and travel angle. In addition, an artificial potential field method was applied to avoid collision by correcting the pitch angle corresponding to the work angle. The proposed algorithm is formulated in three-dimensional coordinates, however, its basic behavior was verified through a DAFUL-based simulation using a two-dimensional curved path in the x-y plane without height variation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_06"
    },
    {
      "id": "FrPo7P.7",
      "paperId": "69",
      "title": "Fieldscale 2.0: Spatiotemporal Tail-Adaptive Rescaling for Thermal Infrared Images",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "525313",
          "name": "Kim, Eunseo",
          "affiliation": "Seoul National University"
        },
        {
          "id": "257470",
          "name": "Gil, Hyeonjae",
          "affiliation": "SNU"
        },
        {
          "id": "435433",
          "name": "Rhee, Tai Hyoung",
          "affiliation": "Seoul National University"
        },
        {
          "id": "126962",
          "name": "Kim, Ayoung",
          "affiliation": "Seoul National University"
        },
        {
          "id": "333992",
          "name": "Lee, Dongjae",
          "affiliation": "Seoul National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robot Vision"
      ],
      "abstract": "Thermal infrared (TIR) imaging plays a vital role acrossdiverse illumination conditions, yet its native 14-or 16-bit format requires compression to standard 8-bit representations for visualization and downstream processing. While conventional linear and nonlinear tone-mapping approaches often cause severe darkening or detail loss, recent field-based rescaling methods offer better spatial adaptivity. However, these frameworks still suffer from residual artifacts, saturation, and temporal flickering. To resolve these limitations, we present Fieldscale 2.0, a spatiotemporal adaptive rescaling framework. Specifically, it integrates a three-knot field model to regulate tail distributions, a distribution-aware suppression module to prevent information loss from over-truncation, and an exponential moving average (EMA)-based temporal smoothing scheme for temporal stability. To validate its effectiveness, we conduct experiments across multiple thermal datasets and show that Fieldscale 2.0 achieves robust image and rescaling quality, improves temporal consistency in video sequences, and delivers better performance on a downstream task.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_07"
    },
    {
      "id": "FrPo7P.8",
      "paperId": "80",
      "title": "Virtual Lens Array Synthesis from Multi-View Images Via IRIM",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "461622",
          "name": "Lee, Hyeongju",
          "affiliation": "Kyushu Institute of Technology"
        },
        {
          "id": "407498",
          "name": "Cho, Myungjin",
          "affiliation": "Hankyong National University"
        },
        {
          "id": "407488",
          "name": "Lee, Min-Chul",
          "affiliation": "Kyushu Institute of Technology"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing"
      ],
      "abstract": "Integral imaging acquires the 4D light field through a physical lens array, which is difficult to fabricate and subject to optical errors such as vignetting and inter-lens crosstalk. In contrast, lens-array displays for integral imaging are commercially available with diverse specifications. This work introduces a deterministic framework that bridges this asymmetry: iRIM, the inverse of Ray-based Inverse Mapping (RIM), synthesizes the elemental image (EI) that any virtual lens array---across diverse (N_L, N_P, l, f) specifications---would have captured from a single multi-view input. The synthesis follows from the bijection established by the forward RIM and is therefore free of quantization error and learned components. We parameterize the virtual lens-array configuration using the physical display geometry, aligning the synthesized EI with the display side for direct 3D visualization. On a Blender-simulated multi-view scene, iRIM produces uniformly clean sub-aperture images (SAIs) across the entire 6X6 angular grid, while a simulated Lytro-style lens-array camera baseline on the same input retains as little as 6.7% effective coverage at the corner SAIs, quantifying the practical gap closed by deterministic synthesis.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_08"
    },
    {
      "id": "FrPo7P.9",
      "paperId": "152",
      "title": "Algebraic Elliptical Extent Estimation for Robust Extended Object Tracking from Partial Contour Observations",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "376973",
          "name": "Lee, In Ho",
          "affiliation": "Korea Institute of Industrial Techology"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications",
        "Process Control Systems"
      ],
      "abstract": "This paper presents a robust extended object tracking (EOT) algorithm that estimates the full elliptical extent of a target from partial contour observations. In practical sensing geometries only the sensor-facing side of the object is observable, so the conventional assumption of measurements distributed over the entire surface no longer holds. The proposed framework models the sensor--object geometry to identify the visible contour, applies an affine-invariant whitening transformation to the measurements, and solves the ellipse-fitting problem in closed form via singular value decomposition, with an explicit ellipse-validity check and an ellipse-specific fallback fit; the recovered parameters are assimilated as linear pseudo-measurements by a standard Kalman filter. On a synthetic maneuvering trajectory the method attains a Gaussian Wasserstein (GW) error of 9.15 m at 0.94 ms per scan, against 64.84--70.62 m for RMM, MEM-EKF*, and PAKF. On a real LiDAR car-tracking sequence of 49 scans with 58--261 points per scan, in which only the right and rear facets are visible (visibility ratio 47--48%), the method attains mean semi-axis errors of 0.16 m and 0.08 m and an orientation error of 2.7 deg against the vehicle dimensions, outperforming the baselines. A sensitivity study delineates the applicable scope: single-scan reconstruction remains reliable for visibility ratios down to approximately 0.3.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_09"
    },
    {
      "id": "FrPo7P.10",
      "paperId": "172",
      "title": "Roll-Rotated Imaging-Sonar Scanning for Elevation-Ambiguity-Free Mapping of Steep Underwater Terrain for Underwater Inspection",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "502241",
          "name": "Ku, Bonchul",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "245519",
          "name": "Kim, Jason",
          "affiliation": "HEROLab (in Univ. POSTECH)"
        },
        {
          "id": "437110",
          "name": "Kim, Seungmin",
          "affiliation": "Pohang University of Science and Technology"
        },
        {
          "id": "278014",
          "name": "Song, Young-woon",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        },
        {
          "id": "148641",
          "name": "Yu, Son-Cheol",
          "affiliation": "Pohang University of Science and Technology (POSTECH)"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications"
      ],
      "abstract": "Underwater 3D mapping with a forward-looking imaging sonar suffers from elevation ambiguity. Each acoustic return gives range and bearing but not elevation angle, so on steeply sloped terrain returns are placed at the wrong height and form a false slope. Prior methods remove this ambiguity by adding a second sonar, which requires an extra sensor and data association between the two devices. This paper presents an active mapping method that uses a single imaging sonar and rotates it about its roll axis on demand. While an occupancy map is built online, steep regions likely to be distorted by the ambiguity are detected and re-scanned with the sonar rolled ninety degrees about its look axis, so that height is resolved by the well-measured bearing angle. The rolled observations then carve the false slope from the map through a probabilistic negative-only update. In a Stonefish simulation, the method maps steep terrain more accurately than fixed tilts of sixty and ninety degrees, lowering the RMSE against the ground truth by about 14% and the number of cells with height error above 0.5 m by about 57% over the better baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_10"
    },
    {
      "id": "FrPo7P.11",
      "paperId": "200",
      "title": "What Can Lines Tell Us? Parking-Line-Derived Orientation Constraints for Parking-Lot Mapping",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526046",
          "name": "Hyeon, Sangmi",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "526047",
          "name": "Jeong, Sunghwan",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "526050",
          "name": "Choi, Kyoungho",
          "affiliation": "Ekonexon"
        },
        {
          "id": "186197",
          "name": "Jo, HyungGi",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "LiDAR-inertial odometry (LIO) in ground-dominant parking lots can suffer from biased road-surface correspondences caused by parked vehicles, curbs, and partially occluded ground returns. We exploit intensity-selected parking-line points to estimate a local road-surface plane and incorporate its normal into an iterated error-state Kalman filter (IESKF) as an orientation-only pseudo-measurement. The same plane also defines a one-sided map-insertion gate that suppresses below-plane outliers. On a real parking-lot sequence collected by an EV charging robot, the proposed method achieved the lowest Mean Map Entropy (MME) and the smallest final-revisit vertical displacement magnitude among the evaluated methods. The complete pipeline required 51.11 ms per scan on an NVIDIA Jetson AGX Orin.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_11"
    },
    {
      "id": "FrPo7P.12",
      "paperId": "233",
      "title": "State of Charge Estimation under Temperature Mismatch Via Voltage-Domain Adaptation and SOC-Domain Residual Learning",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526053",
          "name": "Cheon, Kibum",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "526122",
          "name": "Haejun, Kim",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "314591",
          "name": "Shin, Jongho",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Control Theory and Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "State of charge (SOC) estimation based on equivalent circuit models (ECMs) and Kalman filters is widely used in battery management systems. However, its accuracy degrades when the operating temperature differs from that of the identified model. Because constructing a complete temperature-specific library of open-circuit voltage (OCV)–SOC tables and ECM parameters is often impractical, a nominal model identified at a reference temperature must be reused at other operating temperatures. This paper presents an online SOC estimation framework that addresses such temperature mismatch through sequential compensation. Starting from a nominal extended Kalman filter (EKF), the ohmic resistance is first updated online using recursive least squares (RLS) to reduce voltage-domain mismatch. The remaining SOC-domain residual is then corrected by a lightweight neural network (NN), and a low-pass filter stabilizes the correction. On the CALCE INR 18650-20R dataset, applying a 25°C nominal model to 45°C dynamic discharge profiles, the proposed estimator reduces the SOC RMSE from 0.2911% for the 25°C fixed EKF to 0.0740%. The estimator also remains suitable for real-time operation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_12"
    },
    {
      "id": "FrPo7P.13",
      "paperId": "257",
      "title": "Weakly Supervised rPPG Learning Using ECG-To-PPG Signal Translation Diffusion Model",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526198",
          "name": "Oh, Seungmin",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "377693",
          "name": "Choi, Jiho",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "281952",
          "name": "Lee, Sang Jun",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Biomedical Instruments and Systems",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Remote photoplethysmography (rPPG) estimates physiological signals from facial videos without contact sensors. Supervised rPPG methods require reliable photoplethysmography (PPG) labels, but PPG signals measured in driving environments can be distorted by motion artifacts, illumination changes, vehicle vibration, and contact pressure variation. These noisy labels can degrade rPPG training by providing inaccurate pulse patterns. To address this problem, this paper proposes a weakly supervised rPPG learning framework using ECG-to-PPG signal translation. The proposed framework generates pseudo PPG signals from ECG signals and uses them as supervision signals for rPPG model training. For pseudo PPG generation, this paper uses Physiological Frequency-Consistency Region-Disentangled Diffusion Model (PFC-RDDM), which incorporates PPG peak- and trough-based ROIs, ECG R-peak condition information, and physiological loss functions. Experimental results show that PFC-RDDM improves ECG-to-PPG generation performance and that generated pseudo PPG labels can be used for rPPG training on ECG-only driving data.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_13"
    },
    {
      "id": "FrPo7P.14",
      "paperId": "284",
      "title": "Information-Aware Source Selection for Open-Loop Drone Response Prediction",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "526176",
          "name": "Park, Hyeongjun",
          "affiliation": "Hanyang University"
        },
        {
          "id": "349314",
          "name": "Kang, Chang Mook",
          "affiliation": "Hanyang University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems",
        "Robotic Applications"
      ],
      "abstract": "This extended abstract examines source-selected response prediction for an unmanned aerial vehicle (UAV) simulated in PX4 software-in-the-loop (SITL). Flight logs are reorganized into transition samples containing velocity and angular-rate states, offboard command setpoints, tracking-error terms, and finite-difference derivative labels. A Ridge predictor is trained from source excitation logs after candidate source windows are ranked by a composite score reflecting trajectory diversity, tracking mismatch, response magnitude, and command variation. Prediction quality is assessed by recursively propagating states in open loop, rather than by relying only on one-step derivative fitting. The experiments show that source-selected Ridge is most effective on aggressive velocity-reversal maneuvers, while persistence remains competitive for smoother or mixed trajectories. Controlled checks with multilayer perceptron (MLP) base and residual models further indicate that improved local fitting does not automatically produce stable multi-step prediction. These results emphasize rollout-oriented validation and maneuver-dependent source selection for compact UAV response models.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_14"
    },
    {
      "id": "FrPo7P.15",
      "paperId": "322",
      "title": "LiDAR-Guided Geometric Filtering for Noise Removal in W-Band Radar Odometry",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "465291",
          "name": "Lee, Dongje",
          "affiliation": "SEADRONIX"
        },
        {
          "id": "150694",
          "name": "Kim, Hanguen",
          "affiliation": "Seadronix Corp"
        },
        {
          "id": "232046",
          "name": "Jang, Hyesu",
          "affiliation": "Seadronix"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Navigation, Guidance and Control",
        "Robotic Applications"
      ],
      "abstract": "W-band radar is increasingly adopted for perception in robotics, with its robustness under adverse weather and its extended range relative to camera and LiDAR. Prior radar approaches rely on intensity-based detection, assuming noise returns are weak. In practice, radar cannot separate spurious signals since noise frequently matches the intensity of real structures. Thus, we propose a heterogeneous sensor fusion method that uses geometric line features extracted from LiDAR. Line features serve as a spatial constraint, retaining only radar returns originating from physical structures. Across maritime and urban ground datasets, we filtered out the noise and verified that the discarded noise is nearly indistinguishable from the retained returns in intensity. Supplying the refined returns to state-of-the-art radar odometry algorithms reduces the absolute pose error (APE) of every baseline.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_15"
    },
    {
      "id": "FrPo7P.16",
      "paperId": "343",
      "title": "Detecting Fabric Deformation Using Piezoelectric Soft Sensors",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "502118",
          "name": "Lee, TaeKyoung",
          "affiliation": "Korea University"
        },
        {
          "id": "146365",
          "name": "Cha, Youngsu",
          "affiliation": "Korea University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing"
      ],
      "abstract": "In this paper, we propose a sensing system for detection of fabric deformation using multiple tendon-inspired sensors. Specifically, the piezoelectric sensors in the sensing system are positioned on the corner of a fabric in a fan-shaped configuration. Additionally, sewing threads are connected to the sensors and are tied to the edges of the sensing area, transferring tensile force to the sensors. Furthermore, a depth camera is installed to calculate the ground-truth curvature of the fabric. A series of experiments is conducted with various experimental conditions, including the shape of supporting plates and pulling distances, to evaluate the relationship between the sensor output and the corresponding curvatures. From these results, the curvature of the fabric is found to be estimable using the relationship between the voltage and the curvature. Furthermore, a virtual simulation of fabric deformation is conducted to visualize the real-time change in fabric surface, demonstrating the feasibility of the sensing system. Moreover, we discuss the theoretical expectation for the tendon-inspired sensors.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_16"
    },
    {
      "id": "FrPo7P.17",
      "paperId": "368",
      "title": "Accuracy Enhancement of Finite-Time Spectral Observers Via Exact Partial Discretization for Periodic Signal Estimation",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "527926",
          "name": "Hong, Woosuk",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "526410",
          "name": "Murakami, Madoka",
          "affiliation": "Tokyo University of Science"
        },
        {
          "id": "117320",
          "name": "Nakamura, Hisakazu",
          "affiliation": "Tokyo University of Science"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Control Theory and Applications",
        "Industrial Applications of Control"
      ],
      "abstract": "이 논문은 비선형 유한 시간 스펙트럼 관측자(FTSpO) 이산 시간 시스템. FTSpOS는 다음과 같은 장점을 제공합니다 더 빠른 수렴과 향상된 견고성. 에 대해 이산화, FTSpO는 일반적으로 오일러 근사치법 또는 4차 Runge-Kutta 방법(RK4)을 사용한다. 하지만 이러한 방법들은 상당한 추정 문제를 겪고 있습니다 오류들. 따라서 우리는 정확한 부분 이산화를 제안한다 정확도를 높이기 위한 방법. 컴퓨터 시뮬레이션이 확인해 제안된 방법이 훨씬 더 적은 성과를 낸다는 점입니다 시스템의 추정 오차는 z_1,z_2 그리고 z_3달러.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_17"
    },
    {
      "id": "FrPo7P.18",
      "paperId": "420",
      "title": "GEONJI-3D: A Multimodal Dataset for 3D Perception in Unstructured Outdoor Environments",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "410674",
          "name": "Shin, Jaeho",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "528049",
          "name": "Ha, Jiwon",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "521644",
          "name": "Hwang, JunHyeon",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "104627",
          "name": "Park, Jaebyung",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications",
        "Robot Vision"
      ],
      "abstract": "Autonomous robots operating in unstructured outdoor environments require robust perception capabilities to safely navigate complex terrain with slopes, vegetation, rocks, tree branches, and dynamic obstacles. Although several datasets have been proposed for autonomous driving and off-road perception, multimodal datasets collected using real ground robot platforms in forest-like unstructured environments remain limited. In this paper, we introduce GEONJI-3D, a multimodal dataset for 3D perception and traversability estimation in unstructured outdoor environments. The dataset was collected using a tracked ground robot platform equipped with a stereo RGB-D camera, a 3D LiDAR sensor, and an IMU at the Geonji Mountain Research Forest of Jeonbuk National University. GEONJI-3D consists of two driving scenarios that include well-maintained walking trails, narrow and rough paths, revisited section, vegetation, tree branches, and dynamic obstacles. The dataset provides synchronized RGB images, depth images, LiDAR point clouds, and IMU measurements in the ROS 2 bag format. By providing real-world multimodal sensor data from challenging outdoor environments, GEONJI-3D can support research on sensor fusion, terrain perception, traversability estimation, and robust autonomous navigation for ground robots.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_18"
    },
    {
      "id": "FrPo7P.19",
      "paperId": "441",
      "title": "Seat Occupancy Localization Using Differential Range-Angle Energy Distribution in mmWave Radar",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528315",
          "name": "Kim, Sumin",
          "affiliation": "Changwon National Unversity"
        },
        {
          "id": "528321",
          "name": "Park, Minjoo",
          "affiliation": "Changwon National Univesrity"
        },
        {
          "id": "528317",
          "name": "Ryu, Haeun",
          "affiliation": "Changwon National University"
        },
        {
          "id": "528322",
          "name": "Gim, Juhui",
          "affiliation": "Changwon National University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper proposes a training-free seat occupancy localization method using mmWave radar based on seat-specific energy partitioning in range-angle (RA) maps. An empty-cabin RA map is first utilized as a static reference to suppress structural reflections and extract occupant-induced energy variations. The resulting differential RA-map energy is then partitioned into seat-specific regions using range- and angle-based boundary estimation with sigmoid weighting functions to accommodate boundary uncertainty and occupant motion. Occupancy localization is subsequently performed using normalized energy scores computed within each seat region. Experimental validation in a four-seat cabin mock-up environment demonstrates that the proposed framework can reliably localize seat occupancy under various occupant configurations while maintaining lower computational complexity than conventional radar-processing approaches. The results indicate that the proposed method provides an effective and computationally efficient solution for radar-based seat occupancy localization without requiring point-cloud generation, model training, or retraining procedures.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_19"
    },
    {
      "id": "FrPo7P.20",
      "paperId": "458",
      "title": "SONA: Scanning Once for N Simulation-Ready Assets from 2D Gaussian Splatting for Robotic Manipulation",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "522183",
          "name": "Giri, Na",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "363041",
          "name": "Kim, Beomjoon",
          "affiliation": "Korea Electronics Technology Institute (KETI)"
        },
        {
          "id": "528127",
          "name": "Oh, Saemyung",
          "affiliation": "Korea Electronics Technology Institute"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Vision",
        "Industrial Applications of Control"
      ],
      "abstract": "Scalable simulation of real environments is increasingly central to robot learning, as policies are routinely trained and validated in digital twins (DT) before deployment on hardware. Learning manipulation policies in DT requires per-object simulator assets, which are conventionally modeled, textured, and assigned collision geometry and physical parameters by hand, and rebuilt whenever the scene changes. Asset preparation is thus a primary bottleneck in DT construction. Gaussian Splatting (GS) reconstructs photorealistic scenes from multi-view images, but its output is neither segmented into objects nor endowed with physical properties. This work addresses the scene-to-asset conversion as a distinct problem and presents SONA, a pipeline that converts a single GS reconstruction of a work cell into N per-object, simulation-ready assets. Each object is separated by a training-free vertex-labeling scheme that back-projects video segmentation masks onto a full-scene Truncated Signed Distance Field (TSDF) mesh, paired with a watertight visual mesh and a convex collision mesh in a common coordinate frame, and exported in the USD and URDF formats. On an industrial work cell, SONA reduces asset-generation time by up to 74% at N=6 relative to per-object scanning, and the exported assets reach a 94.2% pick success rate when used for policy learning in Isaac Lab without manual format conversion or physics-parameter calibration. On the one object captured in both scan modes, with identical policy initialization and training budget per asset, the scene-scan asset stays within 1.1% of the dedicated object-scan asset at a one-second hold criterion.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_20"
    },
    {
      "id": "FrPo7P.21",
      "paperId": "468",
      "title": "Robot Tool Path Planning for Automated Peeling of Frozen Tuna",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528349",
          "name": "Jeong, Woong",
          "affiliation": "Korea Institute of Industrial Technology, Korea University"
        },
        {
          "id": "347438",
          "name": "Ahn, Woo Jin",
          "affiliation": "Inha University"
        },
        {
          "id": "535210",
          "name": "Shin, Myeongchan",
          "affiliation": "KITECH"
        },
        {
          "id": "116455",
          "name": "Lim, Myo-Taeg",
          "affiliation": "Korea University"
        },
        {
          "id": "537976",
          "name": "Nam, Yun Seok",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "143938",
          "name": "Pyo, Dongbum",
          "affiliation": "Korea Institute of Industrial Technology"
        },
        {
          "id": "138028",
          "name": "Lee, Kwang Hee",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Robotic Applications"
      ],
      "abstract": "Bluefin tuna is commonly processed into high-value products, and therefore maintaining edible yield during processing is essential. Since the skin is directly attached to the edible flesh, skin removal critically determines the final yield. Nevertheless, the skin is still removed manually with a hand-held planar grinder, making the process labor-intensive and inconsistent in material removal. Achieving consistent material removal therefore requires robotic machining with quantitatively controlled tool paths. The proposed method combines specimen-specific surface path generation, curvature-adaptive iso-scallop spacing, surface-normal tool alignment, and collision-aware path trimming. The spacing between adjacent tool paths is determined directly from the local surface curvature and a prescribed scallop height, eliminating the need for iterative tuning of a specimen-specific global spacing. In NVIDIA Isaac Sim, the proposed method increased the peeling ratio from 92.97% with the equal-spacing baseline to 98.66%, while edible flesh loss increased from 1.96% to 3.04% and processing time increased from 55.38,s to 95.79,s.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_21"
    },
    {
      "id": "FrPo7P.22",
      "paperId": "469",
      "title": "Integrated Mobile Snow-Removal Robot Platform Using FAST-LIO2-Based Localization and Web-Based Control",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "516789",
          "name": "Park, BoJeong",
          "affiliation": "KIRO"
        },
        {
          "id": "434705",
          "name": "Park, Chanill",
          "affiliation": "Korea Institute of Robotics & Technology Convergence (KIRO)"
        },
        {
          "id": "110874",
          "name": "Jung, Eui-Jung",
          "affiliation": "Korea Institute of Robot and Convergence"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Navigation, Guidance and Control",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Current snow-removal operations are performed mainly on roads, whereas narrow sidewalks and alleys are difficult to access with large snow-removal equipment and remain highly dependent on human labor. In addition, snow-removal operations during the night and early-morning hours increase operator fatigue and safety risks. To address these issues, this paper presents a mobile snow-removal robot system using FAST-LIO2-based localization and web-based control. The proposed system integrates LiDAR-IMU-based mapping, PCD-map-based localization, traversability-costmap-based Nav2 navigation, web-based waypoint assignment, and brush and brine equipment control into a ROS2-based platform. In particular, a two-stage localization structure is applied by combining global PCD-map-based initial localization with FAST-LIO2-based local tracking, thereby considering both initial-pose uncertainty and computational load during operation. Experimental results show that the proposed switching structure reduced the computational load by 58.9% compared with the case in which global PCD-map-based localization was continuously executed without switching. In addition, the integrated operation of mapping, localization, waypoint navigation, web-based operation, and equipment command execution was verified. This study focuses on validating the operational feasibility and integrated system architecture of a mobile robot for snow-removal tasks in confined outdoor environments, rather than evaluating quantitative snow-clearing performance under actual snow-covered conditions.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_22"
    },
    {
      "id": "FrPo7P.23",
      "paperId": "528",
      "title": "A Multimodal Integrated Data Synchronization and Acquisition System Based on Heterogeneous Interfaces for Driver Monitoring System Evaluation",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528600",
          "name": "Son, Huigyeong",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "528603",
          "name": "Lee, Hun",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "528596",
          "name": "Oh, Young-dal",
          "affiliation": "KATECH"
        },
        {
          "id": "528605",
          "name": "Ryu, DongWoon",
          "affiliation": "Korea Automotive Technology Institute"
        },
        {
          "id": "117562",
          "name": "Park, Sunhong",
          "affiliation": "Korea Automotive Technology Institute"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Human-Robot Interaction",
        "Biomedical Instruments and Systems"
      ],
      "abstract": "This paper proposes a multimodal data synchronization and acquisition system for the training and evaluation of driver monitoring systems (DMS). The proposed system receives multi-channel camera video from an integrated ECU over RTSP (Real-Time Streaming Protocol) and applies a channel-wise, thread-based concurrent storage structure designed to minimize frame drops. In addition, diverse heterogeneous data such as EEG, biosignals, seat pressure, vehicle CAN, and gaze data are synchronously acquired in a temporally aligned form through trigger and communication interfaces. Through a pilot test conducted in a real-vehicle environment, the stable synchronized acquisition performance of multi-channel video and sensor data was confirmed, and it was verified that the proposed system can be used as a general-purpose data acquisition platform for various DMS studies.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_23"
    },
    {
      "id": "FrPo7P.24",
      "paperId": "529",
      "title": "RGB Image Reconstruction Via Radar-IMU Fusion for Human Localization and Pose Recognition",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528615",
          "name": "Kim, Seungyeon",
          "affiliation": "Sungshin Women's University"
        },
        {
          "id": "147276",
          "name": "Yoo, Jaehyun",
          "affiliation": "Sungshin Women's University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems"
      ],
      "abstract": "The importance of Human Activity Recognition (HAR) is increasing in applications such as indoor monitoring, smart homes, and home care. Frequency-Modulated ContinuousWave (FMCW) radar is widely used as an indoor sensing method because it provides range and velocity information while minimizing privacy intrusion. However, a radar-only method is limited in accurately reconstructing human localization and pose when reflected signals are weak. To address this issue, this paper proposes a FiLM-based radar-IMU fusion model that uses range-Doppler map sequences and wristworn IMU feature sequences. The proposed model generates FiLM parameters from IMU features and uses them to modulate radar feature maps. This allows motion and pose information to be incorporated into the radar representation, enabling RGB image reconstruction of human localization and pose. The experimental setup considers two dynamic activities, walking and crouching walking, over a distance range of 2–7 m, and two static poses, standing and sitting, at distances of 2 m and 7 m. Experimental results show that the proposed FiLM-based fusion method provides more stable RGB-space reconstruction for human localization and pose recognition than a radar-only method.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_24"
    },
    {
      "id": "FrPo7P.25",
      "paperId": "531",
      "title": "FreeRTOS-Based Particle Filter Implementation for Real-Time Dynamic Target Tracking on Resource-Constrained MCUs",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528514",
          "name": "Kim, Chaeyoung",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "540263",
          "name": "Ryu, Seungha",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "109584",
          "name": "Lee, Heoncheol",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper investigates the real-time execution characteristics of particle filtering for dynamic target tracking on a resource-constrained embedded platform and presents a FreeRTOS-based stage-level execution architecture for coordinating computationally intensive particle-filter processing with time-critical control execution. Unlike single-task RTOS execution, the proposed architecture organizes the major particle-filter computations and the subsequent estimate computation into separate binary-semaphore-synchronized tasks while preserving their sequential data dependencies. The estimate computation derives the representative target state from the particle set for use by the control process and is implemented as a separate computational step following resampling. A fixed-priority configuration is further applied to differentiate control-related processing within the stage-level architecture. The proposed approach is evaluated on an ARM Cortex-M7-based STM32H743I MCU operating at 480 MHz through execution-time profiling, motor-control jitter analysis, and deadline-feasibility experiments. Four configurations are compared: Non-RTOS sequential execution, single-task RTOS execution, equal-priority stage-level RTOS execution, and the proposed priority-based stage-level RTOS execution. The proposed configuration exhibits the lowest motor-control jitter, demonstrating improved temporal isolation between PF computation and control processing. Under a 120-ms deadline, the empirical feasibility boundary occurs between 1186 and 1187 particles; 1186 particles satisfy all 1,000 measured cycles, whereas 1187 particles produce a 20% deadline-miss rate.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_25"
    },
    {
      "id": "FrPo7P.26",
      "paperId": "421",
      "title": "Comparison of SAM-Based Models for Tomato Stem Segmentation in Robotic Harvesting",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528030",
          "name": "Park, Jeongmo",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "410658",
          "name": "Seo, YongSeong",
          "affiliation": "Jeonbuk National University"
        },
        {
          "id": "104627",
          "name": "Park, Jaebyung",
          "affiliation": "Jeonbuk National University"
        }
      ],
      "keywords": [
        "Robot Vision"
      ],
      "abstract": "Accurate tomato stem segmentation is essential for determining cutting positions in robotic harvesting systems. Object detection can be used to localize target regions, whereas image segmentation provides pixel-level shape information for representing elongated stem structures. Several SAM-based models have recently been introduced for promptable segmentation, but their relative performance on tomato stems has not been sufficiently examined. This study compares four SAM-based models—MobileSAM, SAM, SAM2, and SAM3—using the same box prompts obtained from YOLOv8m-seg predictions. Quantitative and qualitative evaluations assess segmentation accuracy, boundary preservation, and inference time. SAM achieves the highest IoU and Dice scores, while SAM2 provides similar segmentation performance with a shorter inference time. MobileSAM shows greater boundary deviations in some cases, whereas SAM3 produces false-positive regions and misses substantial portions of the stem, resulting in lower segmentation performance. These results show that the performance of ROI-guided stem segmentation varies across SAM-based models and that model selection is important for robotic harvesting applications.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_26"
    },
    {
      "id": "FrPo7P.27",
      "paperId": "548",
      "title": "DL-GPOM: Dual-Layer Gaussian Process Occupancy Mapping for Mixed-Evidence Preservation",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "314615",
          "name": "Seo, Jaemin",
          "affiliation": "KAIST"
        },
        {
          "id": "148890",
          "name": "Oh, Hyondong",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems",
        "Navigation, Guidance and Control"
      ],
      "abstract": "An occupancy map should tell a motion planner where sensor evidence supports free space and where it supports obstacles. Standard occupancy representations combine free and occupied observations into a single posterior at each location. When free and occupied observations overlap and the free ones are more numerous, the posterior reports the space as free and the occupied observations are ignored---a failure that risks collision. Such overlaps become more frequent in open-world environments, where the robot encounters geometries and surfaces outside its sensor's calibration. We address this loss at the representation level. We model free and occupied observations with two independent Gaussian process (GP) layers---one trained only on free observations (mathbf{V}_f), the other only on occupied observations (mathbf{V}_o)---so that per-class evidence remains separate. From (mathbf{V}_f, mathbf{V}_o) we construct an occupancy representation in which minority occupied evidence is no longer absorbed by the free majority. We call this framework dual-layer GP occupancy mapping (DL-GPOM). To keep inference tractable at large scales, DL-GPOM combines Hilbert space GP approximation with patchwise GPU batching. On a public 2D LiDAR mapping benchmark, DL-GPOM produces the most accurate occupancy classification (AUC) and the most reliable occupancy probabilities (Brier score) among compared methods while running in real time on an embedded GPU.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_27"
    },
    {
      "id": "FrPo7P.28",
      "paperId": "555",
      "title": "Multi-Robot Systems As Pedagogical Tools for Active Learning in Manufacturing Process Pedagogy",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "223134",
          "name": "Farooq, Muhammad Umar",
          "affiliation": "KAIST"
        },
        {
          "id": "528520",
          "name": "Jang, Wonseok",
          "affiliation": "KAIST"
        },
        {
          "id": "528522",
          "name": "Suh, Mingyu",
          "affiliation": "KAIST"
        },
        {
          "id": "528526",
          "name": "Ban, Sahngjin",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "155829",
          "name": "Jang, Young Jae",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "Engineering pedagogy is increasingly adopting active learning methodologies to improve learning outcomes in modern classrooms. In some implementations, interdisciplinary modules are integrated to enhance cross-disciplinary knowledge while reinforcing students' understanding of the core course concepts. This work reports a case study of an active learning-based project that employs a multi-robot system in a manufacturing process course. The project was designed using a problem-based learning methodology, and a pseudo-shop-floor production line was developed on a testbed, with material handling coordinated by a multi-robot system. Enrolled students were divided into teams, where they operated the robots, controlled production, and calculated key performance indicators (KPIs) using the manufacturing process knowledge acquired during the course. Survey results indicated that students highly rated the multi-robot system-based project in terms of improving course learning and enabling the practical application of theoretical concepts. Instructor observations during interviews further suggested increased student motivation and improved conceptual understanding. Overall, the case study demonstrates that robots can be effectively integrated as pedagogical tools to bridge the gap between theory and practice in engineering pedagogy, potentially improving learning outcomes and student engagement.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_28"
    },
    {
      "id": "FrPo7P.29",
      "paperId": "559",
      "title": "RUMBLE: Reinforcement Learning-Based Risk-Aware Unified Motor-Load Balancing and Locomotion Adaptation for Thermal Endurance in Quadruped Robots",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "465456",
          "name": "Kim, Jangho",
          "affiliation": "Daegu Gyeongbuk Institute of Science and Technology"
        },
        {
          "id": "378077",
          "name": "Hong, Jinsong",
          "affiliation": "DGIST"
        },
        {
          "id": "129982",
          "name": "Oh, Sehoon",
          "affiliation": "DGIST"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Industrial Applications of Control"
      ],
      "abstract": "Quadruped robots are increasingly being considered for industrial tasks such as inspection, logistics, and payload transportation. In such tasks, heavy payloads, long operating times, and irregular terrain jointly impose repeated high-torque demands on electrically actuated motors, which can raise motor temperatures close to protection limits. Sudden activation of actuator protection caused by overheating can interrupt the task and may also create safety risks in industrial environments. This paper proposes a temperature-conditioned locomotion modulation framework that adjusts high-level gait and posture commands according to actuator temperature. Instead of uniformly scaling all motor commands or stopping the robot, the proposed Stage 2 module modulates variables such as body pitch, duty factor, and gait frequency to reduce current and torque usage of thermally critical actuators. The method is evaluated in simulation under global high-temperature, single-joint hot, and representative single-leg hot conditions. The results show that mean current and torque RMS decrease under high-temperature states, and that selected hot joints and a representative hot leg use less actuator effort than their all-normal references. These results suggest that the proposed framework has potential for extension to high-load legged-robot tasks such as long-duration payload transportation, industrial inspection, and disaster response.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_29"
    },
    {
      "id": "FrPo7P.30",
      "paperId": "577",
      "title": "DCL-DAE: Dilated CNN and Bi-LSTM Based IMU Denoising Autoencoder for Robust Robot Manipulator Control",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "464132",
          "name": "Heo, Ji-yoon",
          "affiliation": "Sejong University"
        },
        {
          "id": "464129",
          "name": "Woo, Hyunsoo",
          "affiliation": "Sejong University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "While IMU sensors are critical for precise robot manipulator control, diverse disturbance environments induce high-frequency, nonlinear noise that compromises trajectory stability. Conventional filtering and standard deep learning models often degrade temporal resolution or incur high computational costs. To address these challenges, we propose DCL-DAE (Dilated CNN-LSTM Denoising Autoencoder), which integrates dilated convolutions with Bi-LSTM network. By adopting dilated convolutions, the encoder expands the receptive field while preserving fine-grained time-series features. Furthermore, the Bi-LSTM latent space captures bidirectional temporal contexts to isolate and filter out diverse disturbance anomalies. Evaluated on the CASPER dataset under five distinct disturbance conditions, DCL-DAE achieved an average trajectory reconstruction improvement of 68.01%, with an error suppression rate of up to 89.38% in the z-axis acceleration. Qualitative validations via PyBullet physics simulation further confirmed that the proposed architecture robustly mitigates end-effector jitter, directly translating numerical denoising gains into smooth and stable physical control.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_30"
    },
    {
      "id": "FrPo7P.31",
      "paperId": "581",
      "title": "Autonomous Soil Monitoring with Vision-Language Guided Robotic Sensor Insertion",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528751",
          "name": "Shin, Chanhee",
          "affiliation": "Chungbuk National University"
        },
        {
          "id": "133064",
          "name": "Kim, Jayoung",
          "affiliation": "Chungbuk National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Mechanism and Control",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This paper presents an autonomous in-situ soil moisture monitoring system that employs a 6-DoF manipulator mounted on a mobile robot platform. The system uses a vision-language model (VLM) for zero-shot wilted-plant detection and a three-stage vertical approach path that guides a soil moisture sensor into the target pot through sequential approach, insertion, and extraction stages. Conventional unconstrained inverse kinematics (IK)-based motion results in oblique entry trajectories, yielding a 24% collision rate and only 72% task success. By decoupling horizontal positioning from vertical insertion, the proposed three-stage path reduces the collision rate to 4% (an 83.3% reduction) and raises the success rate to 96%. Across 50 repeated trials, the system achieves a position repeatability of 2.4 mm (SD 0.9 mm) and a tilt error within 2.3°. The end-to-end pipeline completes each pot in 65.0 ± 9.2 s, reducing the total number of sensors required by 80%.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_31"
    },
    {
      "id": "FrPo7P.32",
      "paperId": "590",
      "title": "Lightweight Semantic Map Merging Based on Overlapped Semantic Object Detection and Matching for Small Swarm Robot Systems",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528790",
          "name": "Kim, Geunhee",
          "affiliation": "Kumoh National Institute of Technology"
        },
        {
          "id": "109584",
          "name": "Lee, Heoncheol",
          "affiliation": "Kumoh National Institute of Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Sensors and Signal Processing",
        "Robot Vision"
      ],
      "abstract": "As the utilization of multi-robot systems in indoor environments continues to expand, the importance of semantic map merging which integrates independent maps generated by individual robots into a comprehensive global map has increasingly gained prominence. However, map merging on small-scale robot platforms faces inherent challenges, including noise from object detection, uncertainties in communication data, and the limitations of constrained computational resources, making it difficult to simultaneously achieve both real-time performance and robustness. To address these limitations, this paper proposes a lightweight semantic map merging framework designed to achieve both computational efficiency and high registration accuracy. Experimental results using small-scale robots equipped with the Jetson Nano platform demonstrate that the proposed framework maintains high registration success rates and real-time processing efficiency, even within significantly constrained computational environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_32"
    },
    {
      "id": "FrPo7P.33",
      "paperId": "594",
      "title": "A Unified Framework for Collision-Free Path Planning and Contact-Compliant Safety Control in Surgical Assistant Robots",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "427928",
          "name": "Lee, Sanghoon",
          "affiliation": "KAIST"
        },
        {
          "id": "409551",
          "name": "Kim, Sungmin",
          "affiliation": "Korea Advanced Institute of Science and Technology (KAIST)"
        },
        {
          "id": "528723",
          "name": "Kim, JinYeol",
          "affiliation": "Korea Advanced Institute of Science and Technology"
        },
        {
          "id": "340592",
          "name": "Han, Seo Wook",
          "affiliation": "Korean Advanced Institute of Science and Technology"
        },
        {
          "id": "149446",
          "name": "Kim, Min Jun",
          "affiliation": "KAIST"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Biomedical Instruments and Systems",
        "Robot Vision"
      ],
      "abstract": "Surgical assistant robots can support surgeons in repetitive and physically constrained tasks, but their deployment in shared surgical workspaces requires safe operation around dynamic obstacles, delicate anatomical structures, and contact interactions. In such settings, robots must generate feasible motions toward surgical objectives while maintaining safe physical interaction under unexpected contact or human intervention. This paper presents a safety-aware planning and control framework that addresses both geometric and contact safety. The framework couples online obstacle perception and collision-aware motion planning with force-bounding low-level control. The planner adapts reference motion under obstacle, task, and robot constraints, while the controller regulates task-space interaction forces under disturbances and model uncertainty. Validation in a realistic surgical-assistance scenario demonstrates that the proposed framework can coordinate online motion adaptation and force-bounding execution in a contact-rich shared workspace.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_33"
    },
    {
      "id": "FrPo7P.34",
      "paperId": "608",
      "title": "Low-Order Fluid Dynamics Estimation Encoder for Robotic Fluid Transport",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528693",
          "name": "Lee, Jun-Woo",
          "affiliation": "Kookmin University"
        },
        {
          "id": "528698",
          "name": "Kim, TaeHyun",
          "affiliation": "Kookmin University"
        },
        {
          "id": "528795",
          "name": "Kim, Sebeom",
          "affiliation": "Kookmin University"
        },
        {
          "id": "234227",
          "name": "Seo, Hyung-Tae",
          "affiliation": "Kookmin University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Robot Vision",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Robotic liquid transport requires the robot to account for fluid surface responses induced by container motion. Instead of reconstructing the full fluid state or directly estimating raw liquid properties, this paper focuses on estimating low-order response parameters relevant to downstream transport control. We propose a GRU-based Fluid Encoder that maps time-series fluid surface features to the damping ratio zeta and natural frequency omega_n. To introduce actuator-tracking dynamics into the excitation process, a MuJoCo-based virtual container system is used to convert commanded chirp motion into simulated container acceleration, which then drives the low-order sloshing response model. A chirp excitation spanning the target frequency range is adopted to improve parameter identifiability. The proposed encoder is further compared against two analytical frequency-domain baselines, referred to as Blind FRF and Privileged FRF. A control-relevance validation further indicates that the estimated parameters preserve information relevant to downstream motion adaptation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_34"
    },
    {
      "id": "FrPo7P.35",
      "paperId": "627",
      "title": "Inference-Time Temporal Max Pooling for Robust PMSM Drive-Module Fault Diagnosis under Sensor Relocation",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "531565",
          "name": "Youn, Donggyu",
          "affiliation": "UST(University of Science and Technology"
        },
        {
          "id": "270527",
          "name": "Jeung, Deokgi",
          "affiliation": "Korea Institute of Machinery and Materials"
        },
        {
          "id": "137725",
          "name": "Sin, MinKi",
          "affiliation": "Korea Institute of Machinery & Materials"
        },
        {
          "id": "148953",
          "name": "Cho, Jang Ho",
          "affiliation": "Korea Institute of Machinery & Materials"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Sensor relocation alters vibration transmission paths, degrading vibration-based fault diagnosis of permanent magnet synchronous motor (PMSM) drive modules and increasing false alarms. This study evaluates inference-time temporal post-processing for robust multi-class diagnosis under sensor relocation and physically induced disturbances. A triaxial vibration dataset covering five diagnostic conditions and four sensor locations was used to train a lightweight 1D-CNN–BiLSTM model (20.20 M MACs per segment) at a single source location and evaluate it at three other locations, including two strictly unseen test locations. Raw inference, temporal majority voting (TMV), temporal moving average (TMA), and temporal max pooling (TMP) were compared. At 500 rpm with a representative window of (w=40), TMP achieved 95.28% and 99.85% accuracy with 0.00% false alarm rate at the two unseen locations, demonstrating improved cross-location reliability without target-location training data.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_35"
    },
    {
      "id": "FrPo7P.36",
      "paperId": "636",
      "title": "Physics-Guided Acoustic Anomaly Detection with Environment Noise Modeling for Submarine Rotating Machinery",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "531916",
          "name": "Kim, KwangSik",
          "affiliation": "Inha University"
        },
        {
          "id": "531917",
          "name": "Kim, Edam",
          "affiliation": "Department of Naval Architecture and Ocean Engineering, Inha University"
        },
        {
          "id": "531918",
          "name": "Kim, Yoo-Lim",
          "affiliation": "Naval Ship System R&D Team, Hanwha Ocean Co. Ltd"
        },
        {
          "id": "532005",
          "name": "Roh, Young-Ki",
          "affiliation": "Naval Ship System R&D Team, Hanwha Ocean Co. Ltd"
        },
        {
          "id": "531919",
          "name": "Lee, Won-Joon",
          "affiliation": "Naval Ship System R&D Team, Hanwha Ocean Co. Ltd"
        },
        {
          "id": "531920",
          "name": "Lee, JangHyun",
          "affiliation": "Department of Naval Architecture and Ocean Engineering, Inha University"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems"
      ],
      "abstract": "This study proposes an unsupervised anomaly detection framework for the early detection of abnormal operating conditions in submarine rotating machinery under limited-data environments. Because acoustic signals are contaminated by underwater ambient noise and onboard mechanical noise, robust performance against environmental noise is essential. A physics-based submarine noise model was developed by incorporating colored background noise, structure-borne resonance noise, band-limited auxiliary noise, tonal components, and sensor noise. Realistic noise-augmented datasets were generated under signal-to-noise ratio (SNR) conditions ranging from −6 to 0 dB. To interpret the physical characteristics of the acoustic signals, a structural dynamics model of the pump–mount–support structure was established. Modal analysis identified the natural frequencies and mode shapes, while harmonic response analysis revealed resonance-prone frequency regions and vibration amplification at different rotational speeds. For edge-computing applications, three unsupervised anomaly detection algorithms were evaluated: (i) a Gaussian Mixture Model (GMM) using statistical MFCC features, (ii) an Ensemble Autoencoder using statistical acoustic features, and (iii) a Conv1D-based Ensemble Autoencoder using log Mel-spectrogram sequences. Performance was evaluated using AUC, F1-score, and computational efficiency. The GMM achieved competitive performance with low computational cost, whereas the Conv1D-based model provided higher detection accuracy by exploiting temporal acoustic patterns at the expense of greater computational complexity. These results highlight the importance of selecting an appropriate anomaly detection algorithm by balancing detection performance and computational efficiency for resource-constrained edge-computing environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_36"
    },
    {
      "id": "FrPo7P.37",
      "paperId": "637",
      "title": "VR-Based Teleoperation and Data Collection Pipeline for VLA Training on a Dual-Arm Manipulator",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "532000",
          "name": "Hong, SuHyun",
          "affiliation": "University of Seoul"
        },
        {
          "id": "100369",
          "name": "Hwang, Myun Joong",
          "affiliation": "University of Seoul"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems"
      ],
      "abstract": "Vision-Language-Action (VLA) models have recently emerged as a promising approach to learning robot manipulation policies from visual observations and language instructions. However, deploying a VLA model on a specific real-world robot requires a demonstration dataset compatible with the robot's kinematic structure, sensor configuration, and action representation. This paper presents a VR-controller-based teleoperation and data collection pipeline for VLA training on a dual-arm platform. The system supports independent teleoperation of the left and right PiPER manipulators and records multi-view RGB images, dual-arm robot states, actions, and language instructions in the LeRobotDataset v3.0 format. The proposed pipeline was evaluated through SmolVLA fine-tuning and real-robot execution on a controlled bottle pick-and-place task.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_37"
    },
    {
      "id": "FrPo7P.38",
      "paperId": "638",
      "title": "When UAVs Meet IoT: Digital Twin-Based Training System",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "189650",
          "name": "Jung, Sungwook",
          "affiliation": "KETI (Korea Electronics Technology Institute)"
        },
        {
          "id": "349677",
          "name": "Jung, Won-Seok",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "349679",
          "name": "Choi, Sung-Chan",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "311381",
          "name": "Sung, Nak-Myoung",
          "affiliation": "Korea Electronics Technology Institute"
        },
        {
          "id": "349680",
          "name": "Ahn, Il-Yeop",
          "affiliation": "Korea Electronics Technology Institute"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Autonomous Vehicle Systems",
        "Control Devices and Instruments"
      ],
      "abstract": "This paper presents a digital twin-based training system that integrates physical and software-in-the-loop UAVs with a ground control system and a three-dimensional simulation environment. A digital twin relay engine built on the oneM2M-compliant Mobius platform provides a common middleware layer for UAV telemetry exchange, command delivery, and physical--virtual state synchronization. Platform-specific flight-control interfaces are isolated within the relay layer, allowing the ground control system and simulator to process physical and virtual UAV data through a unified communication structure. The implemented system was evaluated using both SITL-based and physical UAV platforms. The experimental demonstration confirmed end-to-end telemetry delivery, ground control system integration, and the reflection of physical UAV states in the virtual environment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_38"
    },
    {
      "id": "FrPo7P.39",
      "paperId": "640",
      "title": "Design Progress of an Articulated Robotic Arm for Low-Payload Maintenance Tasks in KSTAR",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "191256",
          "name": "Lee, Dohee",
          "affiliation": "Korea Institute of Fusion Energy"
        },
        {
          "id": "368601",
          "name": "Kim, Hong-Tack",
          "affiliation": "Korea Institute of Fusion Energy"
        },
        {
          "id": "368604",
          "name": "Park, Young Min",
          "affiliation": "Korea Institute of Fusion Energy"
        },
        {
          "id": "368606",
          "name": "Hong, Kwon Hee",
          "affiliation": "Korea Institute of Fusion Energy"
        },
        {
          "id": "368603",
          "name": "Her, Namil",
          "affiliation": "KFE"
        },
        {
          "id": "361999",
          "name": "Choi, Jungsup",
          "affiliation": "SEOULTECH UNIVERSITY"
        },
        {
          "id": "111445",
          "name": "Kim, Jinhyun",
          "affiliation": "Seoul National University of Science and Technology"
        },
        {
          "id": "368682",
          "name": "Kim, Beom Seok",
          "affiliation": "Seoul National University of Science and Technology"
        },
        {
          "id": "368683",
          "name": "Moon, Jeong Whan",
          "affiliation": "KNR System"
        },
        {
          "id": "112026",
          "name": "Ryew, Sung Moo",
          "affiliation": "KnR Systems Inc"
        }
      ],
      "keywords": [
        "Robotic Applications"
      ],
      "abstract": "Maintenance of fusion experimental devices like KSTAR is challenging due to harsh conditions such as high vacuum and temperatures. Typically, long downtime is required to cool and reduce radiation levels before possible human access. To address this, we designed an articulated robotic arm to perform low-payload maintenance tasks inside the KSTAR device. This paper presents the design progress of an articulated robotic arm, including system configuration, hardware design, and structural analysis, as part of a stage-wise approach to developing the arm. The arm is connected to the shuttle device and stored in a cask, totaling 11 m and 13 DoF. We conduct a finite element method (FEM) analysis to ensure design reliability and safety under target load conditions. We use the proposed robot system to perform essential maintenance operations for KSTAR, including visual inspection, debris removal, and other simple tasks. Our robot arm system has the potential to reduce maintenance preparation time, minimize radiation exposure to personnel, and contribute to improving the fusion experiment’s operational uptime and efficiency",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_39"
    },
    {
      "id": "FrPo7P.40",
      "paperId": "652",
      "title": "A Hybrid Robotic Transfer Platform for Manual-Inspection Baggage Logistics",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "355672",
          "name": "Jung, Jooik",
          "affiliation": "Incheon International Airport Corporation"
        },
        {
          "id": "532141",
          "name": "Cho, Nam-Hyun",
          "affiliation": "Incheon International Airport Corporation"
        },
        {
          "id": "349624",
          "name": "Weon, Ihnsik",
          "affiliation": "Korea Institute of Industrial Technology"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Industrial Applications of Control",
        "Process Control Systems"
      ],
      "abstract": "This paper presents a hybrid robotic transfer platform for manual-inspection baggage logistics. In many airport baggage handling systems, baggage selected for manual inspection is still transported by workers between the main baggage handling flow and physically separated inspection areas. To address such recurring operational conditions, this paper reframes the problem as a transferable platform design challenge. It proposes a modular architecture that integrates legacy baggage and process interfaces, centralized orchestration, interoperable autonomous mobile robots (AMRs), conveyor and station handoff modules, vertical transfer interfacing, and safety and traceability functions. The hybrid concept separates repetitive handoff functions from mobile transport functions, thereby reducing technical risk while preserving flexibility across diverse site conditions. The manuscript summarizes the platform concept, layered system architecture, implementation rationale, and verification scenarios for phased deployment in airport environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_40"
    },
    {
      "id": "FrPo7P.41",
      "paperId": "674",
      "title": "Human-Guided Reinforcement Learning-Based Manipulation for Multi-Purpose Agricultural Robots",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "352176",
          "name": "Kim, Changjo",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "470627",
          "name": "Kim, Gangmin",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "470505",
          "name": "Choi, Jangju",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "540329",
          "name": "Kim, Sumin",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "295928",
          "name": "Park, Yonghyun",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        },
        {
          "id": "122299",
          "name": "Son, Hyoung Il",
          "affiliation": "Chonnam National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "This study proposes a human-guided, reinforcement learning-based manipulation method for dual-arm agricultural robots performing various farming tasks in complex environments. By combining imitation learning and reinforcement learning, the proposed method enables the system to learn efficient and stable manipulation strategies while reducing reliance on manually designed control rules. First, the system learns human behaviors related to farming tasks through behavior cloning (BC), and then refines the learned policy using the proximal policy optimization (PPO) algorithm to enhance robustness and adaptability across diverse agricultural environments. This enables the system to mimic complex dual-arm cooperative behaviors, such as performing a primary task with one arm while removing obstacles with the other, allowing efficient operation even in complex and irregular environments. Through this study, agricultural robots are expected to perform tasks in a human-like manner across complex and diverse agricultural environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_41"
    },
    {
      "id": "FrPo7P.42",
      "paperId": "675",
      "title": "Tactile-Based Reinforcement Learning for Visibility Enhancing Branch Pushing in Agricultural Robot",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "470627",
          "name": "Kim, Gangmin",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "334460",
          "name": "Jo, Yuseung",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "352176",
          "name": "Kim, Changjo",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "540315",
          "name": "Park, Jiwoon",
          "affiliation": "Chonnam University"
        },
        {
          "id": "540318",
          "name": "Ahn, Yuhyun",
          "affiliation": "Chonnam National University"
        },
        {
          "id": "295928",
          "name": "Park, Yonghyun",
          "affiliation": "Gwangju Institute of Science and Technology (GIST)"
        },
        {
          "id": "122299",
          "name": "Son, Hyoung Il",
          "affiliation": "Chonnam National University"
        }
      ],
      "keywords": [
        "Robotic Applications",
        "Artificial Intelligence Systems",
        "Robot Mechanism and Control"
      ],
      "abstract": "Agricultural robots in dense crop environments often suffer from visibility limitations caused by occluding leaves and branches. This study presents a tactile-based reinforcement learning for visibility enhancing branch pushing in agricultural robots. A soft tactile sensor module attached to a three-finger gripper estimates contact cues, including contact center, contact-direction tendency, and moment tendency during interaction with a deformable branch. These cues are used in a reinforcement learning policy trained in a physics-based branch simulation environment. In a 200 mm pushing task, the tactile-based policy achieved higher final visibility, required fewer steps to success, and reduced the end-effector tracking RMSE from 311.82 mm to 43.70 mm compared with the non-tactile condition. The results indicate that tactile-based reinforcement learning improves pushing accuracy during occlusion-clearing manipulation.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_42"
    },
    {
      "id": "FrPo7P.43",
      "paperId": "516",
      "title": "Emergency Vehicle Siren Recognition, Azimuth Estimation, and Distance Estimation Using Multichannel Acoustic Features",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528573",
          "name": "An, Hyogeon",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "528580",
          "name": "Park, Sangjun",
          "affiliation": "Tech University of Korea"
        },
        {
          "id": "407716",
          "name": "Park, Seongkeun",
          "affiliation": "Tech University of Korea"
        }
      ],
      "keywords": [
        "Sensors and Signal Processing",
        "Artificial Intelligence Systems",
        "Autonomous Vehicle Systems"
      ],
      "abstract": "This paper proposes a model that simultaneously performs event recognition, azimuth estimation, and distance estimation for emergency vehicle siren sounds using multichannel acoustic features. Conventional SELD-based models have been effectively used for sound event detection and direction-of-arrival estimation; however, distance information of the sound source should also be considered to determine the approach status of an emergency vehicle. Therefore, in this study, a Distance Head is added to a CST-Former-based SELD architecture, enabling a single model to jointly predict siren events, azimuth, and distance information. Mel-spectrograms and GCC-based multichannel acoustic features are used as input features, and the channel-, frequency-, and time-axis attention mechanisms of the CST-Former are employed to learn spatial information and time-frequency patterns from acoustic signals. For distance estimation, log-distance regression is applied to reduce the effect of scale differences in distance values, and a distance mask is used so that the loss is computed only for frames with valid distance labels. The applicability of the proposed model is verified by evaluating sound recognition performance, azimuth estimation error, and distance estimation error using multichannel siren data acquired in a real-world environment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_43"
    },
    {
      "id": "FrPo7P.44",
      "paperId": "403",
      "title": "Fall-Risk Information Report Generation System for On-Site Safety Diagnosis (I)",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "410765",
          "name": "Hong, Sung Min",
          "affiliation": "Kunsan National University"
        },
        {
          "id": "528143",
          "name": "Kim, Hwa Seok",
          "affiliation": "Kunsan National University"
        },
        {
          "id": "383659",
          "name": "Kim, Sun Young",
          "affiliation": "Kunsan National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Structural inspection in aging buildings and construction sites often involves hazardous areas where direct human access is difficult. To support safer preliminary inspection, this study proposes a mobile robot-based safety diagnosis system that detects surface damage candidates and fall-risk areas, records their spatial information, and generates structured inspection reports using a Vision-Language Model (VLM). Surface damage candidates are detected from robot-acquired RGB images using YOLOv8n-seg, while fall-risk regions are classified using the proposed RGB-D-based model that exploits both visual appearance and depth cues. Detected events are associated with robot poses and representative 3D points using FAST-LIO2-based mapping information. Experimental results show that the proposed RGB-D model achieves an accuracy of 0.956 and an F1-score of 0.953, outperforming YOLO-based classification models. The VLM-generated reports provide event location, visual evidence, risk type, and required follow-up verification, demonstrating the feasibility of robot-assisted preliminary safety inspection for expert diagnosis in complex and hazardous environments.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_44"
    },
    {
      "id": "FrPo7P.45",
      "paperId": "404",
      "title": "Geometry-Consistent Spatial Danger Mapping for Floor-Opening Fall-Risk Assessment on Construction Sites (I)",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "528143",
          "name": "Kim, Hwa Seok",
          "affiliation": "Kunsan National University"
        },
        {
          "id": "410765",
          "name": "Hong, Sung Min",
          "affiliation": "Kunsan National University"
        },
        {
          "id": "383659",
          "name": "Kim, Sun Young",
          "affiliation": "Kunsan National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Floor openings on construction sites can lead to serious fall accidents when they are not recognized and controlled in advance. This study proposes a preliminary safety inspection framework that estimates floor-opening risk from multi-view RGB images and 3D geometric information. The proposed method combines SAM3-based floor segmentation, VGGT-based depth and camera pose estimation, and DINOv3/CLIP-based 3D feature aggregation to construct a geometry-consistent scene representation. Based on this representation, support-deficient regions inside the floor plane are detected as opening candidates, and a protection-aware spatial danger map is generated by considering cover-like and guard-like structures. A rule-based decision module determines the safety status using measured geometric evidence, while a vision-language model summarizes the inspection result with retrieved regulatory evidence. Experiments on real construction-site scenes show that the proposed framework can quantify hazardous floor areas and reduce false alarms compared with image-only VLM assessment.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_45"
    },
    {
      "id": "FrPo7P.46",
      "paperId": "536",
      "title": "Actor–Critic Auxiliary Particle Filtering with a δ-GLMB Label Set for Robust Infrared Multi-Target Tracking (I)",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "466619",
          "name": "Kang, Chang Ho",
          "affiliation": "Sejong University"
        },
        {
          "id": "487135",
          "name": "Choi, Ji Hun",
          "affiliation": "Sejong University"
        },
        {
          "id": "540574",
          "name": "Lee, Dong Hoon",
          "affiliation": "Sejong University"
        },
        {
          "id": "383659",
          "name": "Kim, Sun Young",
          "affiliation": "Kunsan National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "Infrared (IR) small-target multi-target tracking is dominated by missed detections, localization noise, and clutter, conditions under which tracking-by-detection pipelines degrade sharply. We present an Actor–Critic Auxiliary Particle Filter (ACPF) embedded as the single-target density of a full δ-Generalized Labeled Multi-Bernoulli (δ-GLMB) recursion. The Actor draws a measurement-guided two-stage auxiliary proposal, while the Critic adapts the process-noise scale online from normalized-innovation and effective-sample-size statistics, so the particle cloud widens its search exactly when measurements become uninformative. During missed-detection frames an appearance-histogram likelihood, compared by a debiased Sinkhorn optimal-transport divergence, coasts each track through occlusion. The δ-GLMB layer manages target number, labels, and data association with a Gibbs-sampled joint predict–update and Bayes-optimal state extraction. On an 825-run controlled-degradation campaign over IR sequences, a proposed variant attains the best MOTA on each of the four degraded detector fronts (on par with BoT-SORT under occlusion), outperforming controlled re-implementations of strong tracking-by-detection (ByteTrack, BoT-SORT) on a shared measurement stream, and substantially surpassing naive SORT, which collapses under clutter.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_46"
    },
    {
      "id": "FrPo7P.47",
      "paperId": "537",
      "title": "Fault-Aware Fixed-Lag SE(2) Smoothing for Online Learned Residual Correction of Visual Odometry (I)",
      "session": "FrPo7P",
      "date": "2026-10-30",
      "start": "16:10",
      "end": "17:10",
      "room": "3F Lobby",
      "type": "Poster Session",
      "authors": [
        {
          "id": "466619",
          "name": "Kang, Chang Ho",
          "affiliation": "Sejong University"
        },
        {
          "id": "487135",
          "name": "Choi, Ji Hun",
          "affiliation": "Sejong University"
        },
        {
          "id": "528639",
          "name": "Yoon, Sung Jin",
          "affiliation": "Sejong University"
        },
        {
          "id": "383659",
          "name": "Kim, Sun Young",
          "affiliation": "Kunsan National University"
        }
      ],
      "keywords": [
        "Navigation, Guidance and Control",
        "Artificial Intelligence Systems",
        "Sensors and Signal Processing"
      ],
      "abstract": "We present an online learned residual-correction framework for visual odometry (VO) on the KITTI odometry benchmark and study how it can be extended toward bundle-adjustment (BA)-style smoothing without sacrificing its online, fault-aware character. Starting from an Error-State SE(2) particle filter whose correction is produced by an optimal-transport-based neural module (OTPF) acting on the frame-to-frame VO residuals of an ASpanFormer matching front-end, we add a fixed-lag SE(2) smoothing layer together with a fault-detection head and a BLACKOUT frame-skipping mechanism. Through a controlled comparison over 11 KITTI sequences, 3 random seeds, and raw / fault-injected scenarios — spanning a raw-residual baseline, the SE(2)-OTPF online filter, a fixed-lag SE(2) smoother, and four OTPF-coupled smoother variants — we find that a fixed-lag SE(2) residual smoother reduces the position-residual RMSE by up to about 85% under injected faults while preserving rotation, whereas tightly coupling the neural OTPF correction into the optimizer induces a yaw/rotation collapse. At a tuned gate the learned fault detector flags 92% of injected fault events at low false alarm (rising to 97% at a higher-recall gate) with near-zero latency, its only residual gap being the sub-noise onset of slow drift. We therefore position the method not as a replacement for full visual BA but as a fault-aware online residual-correction filter with an optional fixed-lag smoothing layer, and we report the accuracy, runtime (5-21 ms/frame), and fault-detection trade-offs across the design space.",
      "source": "https://ras.papercept.net/conferences/conferences/ICCAS2026/program/ICCAS2026_ContentListWeb_4.html#frpo7p_47"
    }
  ]
}
